 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
WIRE
ROPE HOISTS - BASE MOUNTED WINCHES
|
|
 |
|
|
|
Base Mounted Winches are
rugged and reliable
and a safe choice when a winch best fits the lifting
application. Our Base Mounted Winches can be
built in single-line or twin-line configurations. There
are many times when a winch will be used in
combination with a sheave and even a hook block
and dead-end arrangement. Our hoists meet the
Performance Standards for Overhead Electric Wire
Rope Hoists as per ASME HST-4 as well as the
Safety Standards for Overhead Hoists as per
ASME B30.16. |
|
|
Base Mounted
Single-Line Winch |
|
|
|
|
|
STANDARD
FEATURES |
OPTIONAL
FEATURES |
•
Capacities: 1000 Lbs to 3500 Lbs
• Standard Single Line Lift: 44 Ft
• ASME Service Classification: H3 Duty
• Worm Gear Drives
• AC/Disc Hoist Brake (150% Motor Torque)
• TENV/30-Min/Inv. Ready (3:1) Hoist Motor
• Power Voltages: 230V or 460V-3Ph-60Hz
• Control Voltage: 115V
• NEMA 1 Enclosures: Indoor Service
• Single Speed Contactor Controls
• Fuses & Thermal Overload Protection
• Gear Type Limit Switch
• Temp Rating: 10F to 120F
• Safety Orange Paint
• Heavy Duty/High Quality Construction
• Conforms to NFPA 70 (National Electric Code)
• Conforms to OSHA 1910.179 Safety Standards |
•
Longer Lifts: Over 44Ft
• Power Voltage: 208V or 575V-3Ph-60Hz
• Upgrades for Heavy Service: H4/H4+ Duty
• Heavy Duty Oil Shear Hoist Brake
• 60-Min/Inverter Duty (10:1) Motor
• Class H Insulated Motor
• VFD Control Package (2-Speed)
• 2-Speed Motor/Contactor Controls
• Wired Pendant
• Radio Control System
• Mainline Contactor
• Control Voltage: 24V
• NEMA 4 (Outdoor Service)
• UL/CUL Registered Control Panels
• Heavy Duty Rope Guide System
• Deep Grooved Drum (100% Depth Of Cable)
• Synthetic Oil/Heaters (Operation < 10F)
• Anti-Condensation Heaters
• Safety Yellow Paint
• High Temperature Features
• Corrosion Resistant Features
• Spark Resistant |
|
|
NOTE: SEE BELOW FOR MORE DETAILS ON
THE OPTIONS AND PRICES. |
|
|
|
|
Standard Feature: Component Parts - Worm Gearing (H & T) Features |
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
HOIST
WORM GEARING |
|
HOIST
WORM GEAR 3D MODEL |
|
|
|
|
|
|
|
|
We
use Worm Gear Drives on all of our Wire Rope Hoists, Drive Tractors and
Bridge Crane End Trucks as standard.
Worm Gear Drives are rugged and reliable and offer smooth and quiet operation.
Due to their inherent friction,
Worm Gear Drives also act very similar to brakes by retarding motion.
For that reason,
brakes are generally NOT required on all our Worm Gear Trolleys, Drive
Tractors or End Trucks. Heavy capacity,
high momentum systems operating without VFD controls are sometimes the
exception. In these cases, the trolley or
crane may roll more than the acceptable limit without a brake.
For High-Ratio Worm Gear Hoists,
there are some major advantages over other hoists. |
|
|
|
|
|
|
|
|
•
High-Ratio Worm Gears safely control the lifting load without the need for
a Mechanical Load Brake.
• High-Ratio Worm Gears are inherently Self-Locking thus these hoists
are very capable of acting as 2nd
stopping brake and also holding up a load.
• Worm Gear Hoists have very Low Maintenance as fewer moving parts
lead to fewer repairs
• High-Ratio Worm Gear Hoists Conform to CMAA, ASME and OSHA guidelines |
|
|
|
|
|
|
|
DRAWING |
 |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
PRICES
FOR SINGLE LINE BASE MOUNTED WINCHES |
| Model No. |
Capacity
(lbs.) |
Speed
(FPM) |
Lift
(ft) |
Reeving
Type |
Cable
(Dia.) |
Winch
Motor
(HP @ RPM) |
Dim.
(A) |
Dim.
(B) |
Dim.
[C] |
Wgt.
(Lbs.) |
Prices |
EC1-4044 |
1,000 |
40 |
44 |
1
PS |
1/4 |
2
@ 1200 |
33" |
16" |
22
1/2" |
450 |
|
EC1-6044 |
1,000 |
60 |
44 |
1
PS |
1/4 |
3
@ 1800 |
33" |
16" |
22
1/2" |
450 |
|
EC1.5-4044 |
1,500 |
40 |
44 |
1
PS |
5/16 |
3
@ 1200 |
35" |
16" |
24
1/2" |
500 |
|
EC1.5-6044 |
1,500 |
60 |
44 |
1
PS |
5/16 |
5
@ 1800 |
33" |
16" |
22
1/2" |
450 |
|
FC2-4040 |
2,000 |
40 |
40 |
1
PS |
3/8 |
4
@ 1200 |
38" |
18" |
29
1/2" |
525 |
|
FC2-6040 |
2,000 |
60 |
40 |
1
PS |
3/8 |
6
@ 1800 |
38" |
18" |
29
1/2" |
600 |
|
FC2.5-4040 |
2,500 |
40 |
40 |
1
PS |
7/16 |
5
@ 1200 |
38" |
18" |
29
1/2" |
625 |
|
FC2.5-6040 |
2,500 |
60 |
40 |
1
PS |
7/16 |
7.5
@ 1800 |
38" |
18" |
29
1/2" |
625 |
|
FC3-4040 |
3,000 |
40 |
40 |
1
PS |
7/16 |
6
@ 1200 |
38" |
18" |
29
1/2" |
625 |
|
FC3-6040 |
3,000 |
60 |
40 |
1
PS |
7/16 |
10
@ 1800 |
38" |
18" |
29
1/2" |
675 |
|
FC3.5-4048 |
3,500 |
40 |
48 |
1
PS |
7/16 |
7.5HP
@ 1200 |
38" |
18" |
29
1/2" |
850 |
|
|
**NOTES**
1. BASIC SINGLE SPEED (NEMA 1) CONTROLS (STANDARD); REV. CONTACTORS, TRANSFORMER
& TERMINAL STRIP
2. HOIST MOTOR THERMOSTAT (AS STANDARD)
3. PENDANT AND FURTHER MOTOR/CIRCUIT PROTECTION (ARE OPTIONAL - SEE HOIST
ACCESSORIES & OPTIONS)
4. INDOOR OPERATION (AS STANDARD)
5. 230V OR 460V-3PH-60HZ (AS STANDARD)
6. GEAR TYPE LIMIT SWITCH (AS STANDARD) |
|
Optional
Feature: Component Parts -
Control Packages (Hoist, Trolley, Crane) |
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
Custom
Control Panels |
|
|
|
|
Panel
With VFD Hoist and Trolley Controls |
|
|
|
|
|
|
|
|
|
 |
|
|
|
We
offer various Control Packages for all our Hoist and
Crane Equipment. Whether it is Standard or Custom, we
can build the control panel of your choice.
(VFD) Control Packages are
slowly becoming very popular
and are almost standard on all new equipment these days.
The benefits of (VFD) Controls by far outweigh its initial
costs. (VFD) Controls allow the operator to precisely and
safely control the load. Acceleration and deceleration rates
and 2-speed control limits are all set to best support the
given application. Any wear induced on mechanical parts
over time when using (VFD) Controls is much less.
|
|
|
|
|
|
Custom
Controls With Radio |
|
|
|
|
|
|
|
|
| Please
see our photos for further reference on our control panels. |
|
Optional
Feature: Wire Rope Hoists -
Special Environments - Explosion Proof |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Explosion
Proof Hoist |
|
|
Trolleys
with Explosion Proof Motors
and Bronze Wheels |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Explosion
Proof Tractor with Bronze Wheels |
Explosion
Proof Hoist with Spark Resistant
Features & Overload Limit Switch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Machines
are designed in accordance with our interpretation of the specifications
of
the National Electric Code, Underwriters Laboratory and Factory Mutual but
are
NOT tested by them, nor do they carry their label as a whole. However, most
of the
Individual Electrical Components do carry an Underwriters Laboratory (UL)
Label.
Please NOTE; the full responsibility
for determining the existence and severity of a
hazard in a specific area rests with the (Authority) responsible for enforcing
that code.
Additional NOTES: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Machines are available for Class I (Vapors): Groups C & D and Class
II
(Dusts): Group E, F & G (As Division 1 or 2)
• We use TENV motors as standard on all Division 2 applications (With
Contained Hazard) as permitted by NEC code.
• Any requirements for Spark Resistant Features in severe hazardous
environments lies with the (Authority)
• Spark Resistant Features generally include Stainless Steel Wire Rope,
Bronze Trolley Wheels and Bronze Hook and/or Complete Block. |
|
|
|
|
|
Explosion
Proof Pendant Station |
|
|
|
|
|
|
|
|
|
Please
see our photos for further
product and component reference.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional
Feature: Custom Hoists - Hoists for Corrosive Environments |
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
Stainless
Steel
Pendant Station |
|
|
|
|
Hoist
& Tractor for Corrosive Environment with S.S. Enclosure and Epoxy
Finish |
|
|
|
|
|
|
|
|
|
|
|
|
|
This
equipment is for use in Corrosive Environments. Outdoor, Marine and Dipping
applications are some of the most
typical. Stainless Steel Components and Epoxy Paint are the common features. |
|
|
|
|
|
|
|
| Please
see our photos for further reference. |
|
|
Optional
Feature: Custom hoists - High Temp/Hot
Metal Hoists |
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
EXTRA
HEAVY DUTY TRACTOR WITH
HIGH TEMP FEATURES INCLUDING
STEEL DRIVE WHEEL |
|
|
|
HOT METAL
HOIST |
|
|
|
|
Dependent
upon the severity of the application, we offer many
different features some of which are printed as guidelines by
CMAA, ASME and ASTM publications. |
|
|
|
|
|
|
Please
see our Equipment Photos as well
as a list of Hot Metal Hoist Features for
further reference. |
|
|
|
|
|
|
|
|
|
HOT METAL
HOIST FEATURES |
|
|
|
|
|
|
•
Worm Gear Drive (As 2nd Braking Mechanism).
• Power Circuit Limit Switch.
• Gear Type (Upper & Lower) Limit Switch.
• Wire Rope with IWRC and 8:1 Safety Factor.
• Hoist Frame Mounted Safety Lugs.
• Rotating Light and /or Warning Bell for Trolley Motion.
• Heat/Splatter Shield under Hook Block.
• Heat Shields under Hoist and Trolley Drive Units.
• Class H Insulation for Hoist and Trolley Motors.
• NEMA 12 Enclosures.
• High Temp Internal Wiring. |
•
High Temp External Wiring with Metal Conduit.
• Magnetic Mainline Contactor.
• Motor Thermostats or Thermal Overload Relays.
• Branch Circuit Fuses.
• NEMA 12 Pendant with Metal Enclosure and Fire
Sleeve Cord Cover.
• High Temperature Oil in Reducers.
• High Temperature Grease in all Bearings.
• Rubber Bumpers.
• Oversized Hook – Hook Throat Opening and
Radius shall allow ladle bail to fit firmly in the
bowl of the hook. |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
HOIST
ACCESSORIES AND CONTROL OPTIONS PRICES |
|
DESCRIPTION |
PRICES |
FOR COMPLETE MOTOR & CIRCUIT PROTECTION |
|
Hoist & Trolley B. C. Fuses, TOL'S or T'STATS & Transformer
Fuses (P & S) |
|
SELECTIVE MOTOR & CIRCUIT PROTECTION ITEMS |
|
Branch Circuit Fuses - Hoist (or) Trolley (Each Branch) |
|
Thermal Overload Motor Protection (Each Motor) |
|
Motor Thermostat (1/3 HP Motor - Only) |
|
Transformer Fuses - (2) Primary & (1) Secondary |
|
PENDANT - WIRED INTO HOIST CONTROLS WITH UP TO 16 FT OF CHAIN DROP |
|
2-Button Station |
|
4-Button Station |
|
6-Button Station |
|
8-Button Station |
|
CONTROL ACCESSORIES - ITEMIZED |
|
Electronic (Trolley) Soft Start - Up to 4 AMPS (208/230/460V) |
|
Mainline Contactor (15 AMP) - Includes 100VA Transformer |
|
Mainline Contactor (30 AMP) - Includes 100VA Transformer |
|
NEMA 12 Enclosure - (Dust Tight) |
|
NEMA 4 Enclosure - (Water Tight) |
|
Rotary Manual Disconnect (30 AMP) |
|
Gear Type Limit Switch (2-Element) |
|
Gear Type Limit Switch (4-Element) |
|
VARIABLE FREQUENCY DRIVES (VFD) - HOIST
(INCLUDES P.E. DRIVE, FUSE PROTECTION & BRAKE CONTACTOR) |
|
2HP (230/460V) |
|
3HP (230/460V) |
|
4-5HP (230/460V) |
|
6-7HP (230/460V) |
|
10HP (230/460V) |
|
15HP (460V Only) |
|
20HP (460V Only) |
|
INVERTER DUTY - HOIST MOTOR (REQUIRED FOR LOW OPERATING SPEEDS -
VFD SET UNDER 20 HZ) |
|
2HP to 10HP (1800 RPM) |
|
2HP to 6HP (1200 RPM) |
|
7-1/2HP (1200) |
|
VARIABLE FREQUENCY DRIVE (VFD) - TROLLEY (INCLUDES PE DRIVE WITH
FUSE PROTECTION) |
|
1HP (230/460V) |
|
2HP (230/460V) |
|
3HP (230/460V) |
|
INVERTER DUTY - TROLLEY MOTOR (REQUIRED FOR LOW OPERATING SPEEDS
-
VFD SET UNDER 15 HZ |
|
1/3HP |
|
1/2HP |
|
3/4HP |
|
1HP |
|
1-1/2HP |
|
TENZ MOTOR - TROLLEY (FOR OUTDOOR, WET OR VERY DIRTY ENVIRONMENTS) |
|
1/3HP |
|
1/2HP |
|
3/4HP |
|
1HP |
|
1-1/2HP |
|
BRAKE - TROLLEY |
|
Up to 1/2HP (STD Housing) |
|
Up to 1HP (STD Housing) |
|
Up to 1/2HP (NEMA 4 - Sealed Housing) |
|
Up to 1HP (NEMA 4 - Sealed Housing) |
|
|
|
| For
other options please contact us. |
|
|
|
Saturn Wire Rope Hoists,
Base Mounted Winches, Base Mounted Hoists, Electric Winch, Powered Winch,
Worm
Gear Base Mounted Winch, Powered Hoists, Electric Hoist, and Base Mounted
Single Line Winch from your source
for material handling equipment. |
Back
to Product Category |
 |
|