 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
WIRE
ROPE HOISTS
SINGLE HOOK MONORAIL HOISTS (1-3 TON)
|
|
|
 |
|
Wire
Rope Hoists are built to last! After 10, 20 and
even 30 years, these hoists are still found abundantly
operating in the field.
Almost All our Wire Rope Hoists
are built around
a WORM GEAR Drive, considered to be the heart
of our machine. Worm Gear Drives are rugged and
reliable and offer smooth and quiet operation. The
high ratio worm gear makes the drive inherently self-
locking and thus provides a safe mechanical load
brake that does not require adjustment.
The MAJOR advantage of a Worm
Gear HOIST
is its low maintenance. Fewer moving parts have
proven to be the answer to greater dependability
and much fewer repairs.
We offers a wide variety of
both standard and
custom hoists that fit almost all applications. Our
hoists range in size from ½ Ton to 15 Ton in
capacity. Low Head-room models start at 11”.
Lifts are available in excess of 100 ft. |
Shown
With Motorized Trolley |
|
|
|
|
|
STANDARD
FEATURES |
OPTIONAL
FEATURES |
•
Capacities: ½ Ton to 7.5 Ton.
• Lifts up to 100 Feet.
• Classification: ASME H4 Duty.
• Suspensions: Motorized Trolley, Plain Trolley or Lug
Mount Type.
• Worm Gear: Both Hoist & Trolley
Drives.
• Hoist Motor is rated 30-Minute Duty (Suitable for VFD
Operations above 20 HZ).
• Hoist Motor is TENV, Design “D” with Class F Insulation
and Thermostat.
• Hoist Brake is AC, Magnetic Disc Type (Rated at 150%
Motor Torque).
• Trolley Motor is TEFC, Continuous Duty with Class B
Insulation.
• Trolley Speeds: 35 or 60 FPM.
• Primary Voltages: 230 or 460V-3PH-60HZ.
• NEMA 1 Enclosure for Indoor Service.
• Basic Single Speed Controls: Reversing Contactor(s),
Transformer, Terminal Strip.
• Secondary Voltage: 115V.
• Upper Paddle Limit Switch – Block Actuated.
• Factory Balanced.
• All Hoists Load Tested Prior to Shipment.
• Safety Orange Paint.
• ONE Year Warranty.
• Heavy Duty Quality Construction.
• Made in the USA. |
•
Primary Voltages: 208V or 575V (3-Phase).
• Primary Voltages: 230V (1-Phase).
• Secondary Voltage: 24V.
• NEMA 12: Enclosure.
• NEMA 4: Weather-Proof Package.
• Pendant: 2, 4, 6 or 8 Button Stations.
• Radio Control Packages.
• VFD Control Packages: 2-Speed Hoist.
• VFD Control Packages: 2 Speed
Trolley.
• Inverter Duty Motors (Required for VFD Operations
under 20 Hz).
• Trolley Soft Start.
• Mainline Contactor.
• Branch Circuit Fuses: Hoist & Trolley.
• Thermal Overload Relays and Motor Thermostats.
• Gear Type Limit Switch.
• Travel Limit Switches.
• Overload Limit Switch (Mounted
Underneath
Trolley).
• Extra Long Lifts.
• Heavy Duty Rope Guide System.
• Trolley Motor Brake.
• Drop Lugs: Trolley and Frame Type.
• Hand Geared Trolley.
• Explosion Proof Features.
• Corrosion Resistant Features.
• High Temp/Hot Metal Features.
• Curved Monorail Features –Hoist &
Tractor
Combinations.
• FDA and Clean Room Features.
• Air Powered: Single Speed Hoist Operation at 90 PSI. |
|
|
NOTE: SEE BELOW FOR MORE DETAILS ON
THE OPTIONS AND PRICES. |
|
|
|
|
Standard Feature: Component Parts - Worm Gearing (H & T) Features |
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
HOIST
WORM GEARING |
|
HOIST
WORM GEAR 3D MODEL |
|
|
|
|
|
|
|
|
We
use Worm Gear Drives on all its Wire Rope Hoists, Drive Tractors and Bridge
Crane End Trucks as standard.
Worm Gear Drives are rugged and reliable and offer smooth and quiet operation.
Due to their inherent friction,
Worm Gear Drives also act very similar to brakes by retarding motion.
For that reason,
brakes are generally NOT required on all our Worm Gear Trolleys, Drive
Tractors or End Trucks. Heavy capacity,
high momentum systems operating without VFD controls are sometimes the
exception. In these cases, the trolley or
crane may roll more than the acceptable limit without a brake.
For High-Ratio Worm Gear Hoists,
there are some major advantages over other hoists. |
|
|
|
|
|
|
|
|
•
High-Ratio Worm Gears safely control the lifting load without the need for
a Mechanical Load Brake.
• High-Ratio Worm Gears are inherently Self-Locking thus these hoists
are very capable of acting as 2nd
stopping brake and also holding up a load.
• Worm Gear Hoists have very Low Maintenance as fewer moving parts
lead to fewer repairs
• High-Ratio Worm Gear Hoists Conform to CMAA, ASME and OSHA guidelines |
|
|
DRAWING |
 |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
PRICES
FOR HOISTS |
| SINGLE HOOK MONORAIL HOISTS 1 TO 3 TON |
Prices |
Model
No. |
Cap.
(lbs.) |
Speed
(FPM) |
Lift
(ft) |
Reeving
Type |
Cable
(Dia) |
Hoist Motor
(HP @
RPM) |
Head
Room
(A) |
Wheel
Base
(E) |
Hook
Drift |
Weight
(lbs) |
Motorized
Trolley
(MT) |
Plain
Trolley
(PT) |
Lug
Mounted
(Blank) |
EA2-2022 |
2,000 |
20 |
22 |
2PS |
1/4 |
2
@ 1200 |
25" |
22
7/8" |
4" |
675 |
|
|
|
EA2-2036 |
2,000 |
20 |
36 |
2PS |
1/4 |
2
@ 1200 |
25" |
27
7/8" |
6
3/4" |
750 |
|
|
|
EA2-2050 |
2,000 |
20 |
50 |
2PS |
1/4 |
2
@ 1200 |
25" |
32
7/8" |
9
3/8" |
825 |
|
|
|
EA2-3064 |
2,000 |
30 |
64 |
2PS |
1/4 |
3
@ 1800 |
25" |
37
7/8" |
11
3/4" |
900 |
|
|
|
EA2-3078 |
2,000 |
30 |
78 |
2PS |
1/4 |
3
@ 1800 |
25" |
42
7/8" |
14
3/8" |
975 |
|
|
|
EA3-2022 |
3,000 |
20 |
22 |
2PS |
5/16 |
3
@ 1200 |
25" |
22
7/8" |
4" |
675 |
|
|
|
EA3-2036 |
3,000 |
20 |
36 |
2PS |
5/16 |
3
@ 1200 |
25" |
27
7/8" |
6
3/4" |
750 |
|
|
|
EA3-2050 |
3,000 |
20 |
50 |
2PS |
5/16 |
3
@ 1200 |
25" |
32
7/8" |
9
3/8" |
825 |
|
|
|
EA3-3064 |
3,000 |
30 |
64 |
2PS |
5/16 |
5
@ 1800 |
25" |
37
7/8" |
11
3/4" |
900 |
|
|
|
EA3-3078 |
3,000 |
30 |
78 |
2PS |
5/16 |
5
@ 1800 |
25" |
42
7/8" |
14
3/8" |
975 |
|
|
|
EA4-1011 |
4,000 |
10 |
11 |
4PS |
1/4 |
2
@ 1200 |
26" |
22
7/8" |
2" |
700 |
|
|
|
EA4-1518 |
4,000 |
15 |
18 |
4PS |
1/4 |
3
@ 1800 |
26" |
27
7/8" |
3
3/8" |
775 |
|
|
|
EA4-1525 |
4,000 |
15 |
25 |
4PS |
1/4 |
3
@ 1800 |
26" |
32
7/8" |
4
3/4" |
850 |
|
|
|
EA4-1532 |
4,000 |
15 |
32 |
4PS |
1/4 |
3
@ 1800 |
26" |
37
7/8" |
5
7/8" |
925 |
|
|
|
EA4-1539 |
4,000 |
15 |
39 |
4PS |
1/4 |
3
@ 1800 |
26" |
42
7/8" |
7
1/4" |
1000 |
|
|
|
FA4-2020 |
4,000 |
20 |
20 |
2PS |
3/8 |
5
@ 1200 |
32" |
28
3/4" |
5
3/8" |
875 |
|
|
|
FA4-2034 |
4,000 |
20 |
34 |
2PS |
3/8 |
5
@ 1200 |
32" |
36
1/4" |
8
7/8" |
950 |
|
|
|
FA4-2048 |
4,000 |
20 |
48 |
2PS |
3/8 |
5
@ 1200 |
32" |
43
3/4" |
12
1/2" |
1025 |
|
|
|
FA4-3063 |
4,000 |
30 |
63 |
2PS |
3/8 |
7.5
@ 1800 |
32" |
51
1/4" |
15
3/4" |
1100 |
|
|
|
FA4-3078 |
4,000 |
30 |
78 |
2PS |
3/8 |
7.5
@ 1800 |
32" |
58
3/4" |
19
3/8" |
1175 |
|
|
|
EA6-1011 |
6,000 |
10 |
11 |
4PS |
5/16 |
3
@ 1200 |
26" |
22
7/8" |
2" |
700 |
|
|
|
EA6-1518 |
6,000 |
15 |
18 |
4PS |
5/16 |
5
@ 1800 |
26" |
27
7/8" |
3
3/8" |
775 |
|
|
|
EA6-1525 |
6,000 |
15 |
25 |
4PS |
5/16 |
5
@ 1800 |
26" |
32
7/8" |
4
3/4" |
850 |
|
|
|
EA6-1532 |
6,000 |
15 |
32 |
4PS |
5/16 |
5
@ 1800 |
26" |
37
7/8" |
5
7/8" |
925 |
|
|
|
EA6-1539 |
6,000 |
15 |
39 |
4PS |
5/16 |
5
@ 1800 |
26" |
42
7/8" |
7
1/4" |
1000 |
|
|
|
FA6-2020 |
6,000 |
20 |
20 |
2PS |
7/16 |
6
@ 1200 |
32" |
28
3/4" |
5
3/8" |
900 |
|
|
|
FA6-2034 |
6,000 |
20 |
34 |
2PS |
7/16 |
6
@ 1200 |
32" |
36
1/4" |
8
7/8" |
975 |
|
|
|
FA6-2048 |
6,000 |
20 |
48 |
2PS |
7/16 |
6
@ 1200 |
32" |
43
3/4" |
12
1/2" |
1050 |
|
|
|
FA6-3063 |
6,000 |
30 |
63 |
2PS |
7/16 |
10
@ 1800 |
32" |
51
1/4" |
15
3/4" |
1125 |
|
|
|
FA6-3078 |
6,000 |
30 |
78 |
2PS |
7/16 |
10
@ 1800 |
32" |
58
3/4" |
19
3/8" |
1200 |
|
|
|
|
|
**NOTES**
1. BASIC SINGLE SPEED (NEMA 1) CONTROLS (STANDARD); REV. CONTACTORS, TRANSFORMER
& TERMINAL STRIP
2. HOIST MOTOR THERMOSTAT (AS STANDARD)
3. PENDANT AND FURTHER MOTOR/CIRCUIT PROTECTION (ARE OPTIONAL - SEE HOIST
ACCESSORIES & OPTIONS)
4. FOR (NO) CONTROLS WITH WIRED J-BOX (NEMA 1) & BALANCED HOIST - SAME
PRICE
5. INDOOR OPERATION (AS STANDARD)
6. 230V OR 460V-3PH-60HZ (AS STANDARD)
7. TROLLEYS BUILT TO FIT S-BEAM, W-BEAM OR PATENTED TRACKS (AS STANDARD)
8. FLANGE WIDTH UP TO 7" (AS STANDARD)
9. MOTORIZED TROLLEYS PROVIDED AT 35 OR 60 FPM (AS STANDARD)
10. GEAR TYPE LIMIT SWITCH (AS STANDARD) FOR LIFTS OVER 28 FT (REEVED-4PS)
& OVER 40 FT (REEVED-2PS) |
|
Optional
Feature: Component Parts -
Control Packages (Hoist, Trolley, Crane) |
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
Custom
Control Panels |
|
|
|
|
|
Panel
With VFD Hoist and Trolley Controls |
|
|
|
|
|
|
|
|
 |
|
|
|
|
We
offer various Control Packages for all our Hoist and
Crane Equipment. Whether it is Standard or Custom, we
can build the control panel of your choice.
(VFD) Control Packages are
slowly becoming very popular
and are almost standard on all new equipment these days.
The benefits of (VFD) Controls by far outweigh its initial
costs. (VFD) Controls allow the operator to precisely and
safely control the load. Acceleration and deceleration rates
and 2-speed control limits are all set to best support the
given application. Any wear induced on mechanical parts
over time when using (VFD) Controls is much less.
|
|
|
|
|
Custom
Controls With Radio |
|
|
|
|
|
|
|
|
|
| Please
see our photos for further reference on our control panels. |
|
|
|
|
|
|
Optional
Feature: Component Parts - Overload Limit Switch |
|
|
|
 |
|
|
|
We offer an Overload
Limit Switch that is mounted
underneath one of our trolleys as an OPTION. This
Overload Limit Switch can be purchased with a
NEW hoist or for an EXISTING hoist and installed
in the field with minimal effort. This switch is adjusted
within 5% and there is no loss of headroom.
|
|
|
|
|
|
Overload
Limit Switch – Trolley Mounted |
|
|
|
|
|
Optional
Feature: Custom Hoists - Rope Guide Hoists |
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
Heavy
Duty Rope Guide System |
|
Rope Guide
Close Up -
Showing Drum and Upper Sheave |
|
|
|
|
|
| We
offer a heavy duty Rope Guide System as a SAFETY option on all our NEW Standard
Headroom Hoists.
This system features a heavy
duty BRONZE Rope Guide and Slide as well as a DEEP GROOVED Drum; grooved
to
100% depth of the wire rope. Our Rope Guide System allows for moderate
side pulling, slack cable conditions and
other load swings that may cause the wire rope to lose its proper groove
and bind up or pile up on the drum.
This option should ALWAYS
be a consideration on LONG LIFT hoist applications but especially on those
in which
the operator is not able to clearly see the drum.
|
|
|
|
|
|
|
| Please
see our photos for further reference.
|
|
|
Optional
Feature: Wire Rope Hoists -
Special Environments - Explosion Proof |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Explosion
Proof Hoist |
|
|
Trolleys
with Explosion Proof Motors
and Bronze Wheels |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Explosion
Proof Tractor with Bronze Wheels |
Explosion
Proof Hoist with Spark Resistant
Features & Overload Limit Switch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Machines
are designed in accordance with our interpretation of the specifications
of
the National Electric Code, Underwriters Laboratory and Factory Mutual but
are
NOT tested by them, nor do they carry their label as a whole. However, most
of the
Individual Electrical Components do carry an Underwriters Laboratory (UL)
Label.
Please NOTE; the full responsibility
for determining the existence and severity of a
hazard in a specific area rests with the (Authority) responsible for enforcing
that code.
Additional NOTES: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Machines are available for Class I (Vapors): Groups C & D and Class
II
(Dusts): Group E, F & G (As Division 1 or 2)
• We use TENV motors as standard on all Division 2 applications (With
Contained Hazard) as permitted by NEC code.
• Any requirements for Spark Resistant Features in severe hazardous
environments lies with the (Authority)
• Spark Resistant Features generally include Stainless Steel Wire Rope,
Bronze Trolley Wheels and Bronze Hook and/or Complete
Block. |
|
|
|
|
|
Explosion
Proof Pendant Station |
|
|
|
|
|
|
|
|
|
Please
see our photos for further
product and component reference.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional
Feature: Custom Hoists - Hoists for Corrosive Environments |
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
Stainless
Steel
Pendant Station |
|
|
|
|
Hoist
& Tractor for Corrosive Environment with S.S. Enclosure and Epoxy
Finish |
|
|
|
|
|
|
|
|
|
|
|
|
|
This
equipment is for use in Corrosive Environments. Outdoor, Marine and Dipping
applications are some of the most
typical. Stainless Steel Components and Epoxy Paint are the common features. |
|
|
|
|
|
|
|
| Please
see our photos for further reference. |
|
|
Optional
Feature: Custom hoists - High Temp/Hot
Metal Hoists |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
EXTRA
HEAVY DUTY TRACTOR WITH
HIGH TEMP FEATURES INCLUDING
STEEL DRIVE WHEEL |
|
|
|
|
|
|
HOT METAL
HOIST |
|
|
|
|
|
|
|
Dependent
upon the severity of the application, we offer many
different features some of which are printed as guidelines by CMAA,
ASME and ASTM publications. |
|
|
|
|
|
Please
see our Equipment Photos as well
as a list of Hot Metal Hoist Features for
further reference. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HOT METAL
HOIST FEATURES |
|
|
|
|
|
|
|
|
|
•
Worm Gear Drive (As 2nd Braking Mechanism).
• Power Circuit Limit Switch.
• Gear Type (Upper & Lower) Limit Switch.
• Wire Rope with IWRC and 8:1 Safety Factor.
• Hoist Frame Mounted Safety Lugs.
• Rotating Light and /or Warning Bell for Trolley Motion.
• Heat/Splatter Shield under Hook Block.
• Heat Shields under Hoist and Trolley Drive Units.
• Class H Insulation for Hoist and Trolley Motors.
• NEMA 12 Enclosures.
• High Temp Internal Wiring. |
|
•
High Temp External Wiring with Metal Conduit.
• Magnetic Mainline Contactor.
• Motor Thermostats or Thermal Overload Relays.
• Branch Circuit Fuses.
• NEMA 12 Pendant with Metal Enclosure and Fire
Sleeve Cord Cover.
• High Temperature Oil in Reducers.
• High Temperature Grease in all Bearings.
• Rubber Bumpers.
• Oversized Hook – Hook Throat Opening and Radius
shall allow ladle bail to fit firmly in the bowl of the hook. |
|
|
Optional
Feature: Custom Hoists - Hoist and Tractor
Combinations |
|
|
|
|
|
|
 |
|
For
superior trolley performance utilize a Hoist & Tractor
Combination.
The consistently POSITIVE
action of a drive tractor will
generally out-perform a standard motorized trolley in many
monorail applications.
By combining a drive tractor
with your hoist, you will better
negotiate curves, ride up inclines and will eliminate nuisance
slipping in many severe working environments.
Furthermore, the inherent beam tension of a drive tractor
can also serve to RESIST motion in certain applications
particularly when load swing or side-pull present motion
issues.
|
|
|
|
|
|
|
|
|
|
|
Rope
Guide Hoist with Tractor Drive |
|
Please
see our photos for some examples.
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
Twin Hook
Hoist with Tractor Drive for
Outdoor Use on Curved Monorail |
|
Semi-Low
headroom Hoist with Tractor Drive |
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
HOIST
ACCESSORIES AND CONTROL OPTIONS PRICES |
|
DESCRIPTION |
PRICES |
FOR COMPLETE MOTOR & CIRCUIT PROTECTION |
|
Hoist & Trolley B. C. Fuses, TOL'S or T'STATS & Transformer
Fuses (P & S) |
|
SELECTIVE MOTOR & CIRCUIT PROTECTION ITEMS |
|
Branch Circuit Fuses - Hoist (or) Trolley (Each Branch) |
|
Thermal Overload Motor Protection (Each Motor) |
|
Motor Thermostat (1/3 HP Motor - Only) |
|
Transformer Fuses - (2) Primary & (1) Secondary |
|
PENDANT - WIRED INTO HOIST CONTROLS WITH UP TO 16 FT OF CHAIN DROP |
|
2-Button Station |
|
4-Button Station |
|
6-Button Station |
|
8-Button Station |
|
CONTROL ACCESSORIES - ITEMIZED |
|
Electronic (Trolley) Soft Start - Up to 4 AMPS (208/230/460V) |
|
Mainline Contactor (15 AMP) - Includes 100VA Transformer |
|
Mainline Contactor (30 AMP) - Includes 100VA Transformer |
|
NEMA 12 Enclosure - (Dust Tight) |
|
NEMA 4 Enclosure - (Water Tight) |
|
Rotary Manual Disconnect (30 AMP) |
|
Gear Type Limit Switch (2-Element) |
|
Gear Type Limit Switch (4-Element) |
|
VARIABLE FREQUENCY DRIVES (VFD) - HOIST
(INCLUDES P.E. DRIVE, FUSE PROTECTION & BRAKE CONTACTOR) |
|
2HP (230/460V) |
|
3HP (230/460V) |
|
4-5HP (230/460V) |
|
6-7HP (230/460V) |
|
10HP (230/460V) |
|
15HP (460V Only) |
|
20HP (460V Only) |
|
INVERTER DUTY - HOIST MOTOR (REQUIRED FOR LOW OPERATING SPEEDS -
VFD SET UNDER 20 HZ) |
|
2HP to 10HP (1800 RPM) |
|
2HP to 6HP (1200 RPM) |
|
7-1/2HP (1200) |
|
VARIABLE FREQUENCY DRIVE (VFD) - TROLLEY (INCLUDES PE DRIVE WITH
FUSE PROTECTION) |
|
1HP (230/460V) |
|
2HP (230/460V) |
|
3HP (230/460V) |
|
INVERTER DUTY - TROLLEY MOTOR (REQUIRED FOR LOW OPERATING SPEEDS
-
VFD SET UNDER 15 HZ |
|
1/3HP |
|
1/2HP |
|
3/4HP |
|
1HP |
|
1-1/2HP |
|
TENZ MOTOR - TROLLEY (FOR OUTDOOR, WET OR VERY DIRTY ENVIRONMENTS) |
|
1/3HP |
|
1/2HP |
|
3/4HP |
|
1HP |
|
1-1/2HP |
|
BRAKE - TROLLEY |
|
Up to 1/2HP (STD Housing) |
|
Up to 1HP (STD Housing) |
|
Up to 1/2HP (NEMA 4 - Sealed Housing) |
|
Up to 1HP (NEMA 4 - Sealed Housing) |
|
|
|
| For
other options please contact us. |
|
|
|
Saturn Wire Rope Hoists,
Single Hook Monorail Hoists, Electric Hoists, Powered Wire Rope Hoists,
Worm Gear
Trolley, I Beam Hoists, 1-3 Ton Trolley Hoist, Worm Gear Hoists, and Electric
Wire Rope Hoists from your source
for material handling equipment. |
Back
to Product Category |
 |
|