FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

THE UTILITY HYDRAULIC CAPSTAN WINCH-HOIST


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


MODEL HY3D - UTILITY HYDRAULIC CAPSTAN WINCH-HOIST
utility hyd capstan winch-hoist
APPLICATIONS
• All purpose lifting and pulling
• Hoisting distribution line transformers
• Communication tower maintenance
• Move rolling loads up to 7,500 lb
FEATURES
• Worm gear reduction for positive load holding
• Rugged construction
• Needs only 2 GPM @ 900 PSI
• Control valve available
• Full power reversible
Model No.
Prices
$2,530
HY3D SPECIFICATIONS
Construction Features:
• Heavy-duty angle base drilled for four (4) 1/2" bolts
   9/16" mounting holes)
• Stress-proof steel drum shaft
• Frictionless bearings
• Hydraulic motor coupled to gear box input shaft
Speeds:
Recommended System Operation(12 GPM @ 1,500 psi)
• 29 RPM: No load
• 29 FPM: 500 lb
Minimum System Operation (2 GPM @ 900 psi)
• 5 RPM: No load
• 5 FPM: 500 lb
Gear System:
• 30:1 Gear Reduction
• Hardened Steel worm gear runs in an oil bath and
   holds load in position when stopped
Note: Line speed is dependent on pump system and equipment
operator. For best results, use the recommended pump and allow
minimal rope slippage.
Duty Cycle:
• 25% - 15 min/hr when operating at full load
Power:
• 3 cu in high-torque rotary hydraulic motor
• 1/2" - 14 NPTF hydraulic connections
Hoisting Rope:
Consult us for type and size of rope. Maintain at least
three wraps of rope on capstan drum when in use.
Heavier loads may require four wraps of rope.
Pump Requirements:
• 2 GPM @ 900 psi minimum pump capacity
• 12 GPM @ 1,500 psi recommended pump capacity
• 2,250 maximum psi
Factory-Installed Options:
• Three-position, Four-Way Directional Control Valve
Shipping Weight: 60 lb

HY3D DRAWINGS
FRONT VIEW
TOP VIEW
SIDE VIEW

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


MODEL HY3D/BAY - THE UTILITY HYDRAULIC BAYONET DRIVE
hydraulic bayonet drive
APPLICATIONS
• Retrieval and Storage of Fibrous Rope
• Pull and Store Coaxial Cable
• Drive AT&T Bayonet Shaft Compatible Accessories
FEATURES
• Worm gear reduction for positive load holding
• Rugged construction
• Needs only 2 GPM @ 900 PSI
• Control valve available
• Full power reversible
Model No.
Prices
$2,772
HY3D/BAY SPECIFICATIONS
Construction Features:
• Heavy-duty angle base drilled for four (4) 1/2" bolts
   9/16" mounting holes)
• Galvanized stress-proof steel drum shaft
• Frictionless bearings
• Hydraulic motor coupled to gear box input shaft
Speeds:
Recommended System Operation (12 GPM @ 1,500 psi)
• 29 RPM: No load
• 29 FPM: Full load
Minimum System Operation (2 GPM @ 900 psi)
• 5 RPM: No load
• 5 FPM: Full load
Gear System:
• 30:1 Gear Reduction
• Hardened Steel worm gear runs in an oil bath and
   holds load in position when stopped
Note: Line speed is dependent on pump system and equipment
operator. For best results, use the recommended pump and allow
minimal rope slippage.
Duty Cycle:
• 25% - 15 min/hr when operating at full load
Power:
• 2.8 cu in high-torque rotary hydraulic motor
• 1/2" NPTF hydraulic connections
Hoisting Rope:
Consult us for type and size of rope. Maintain at least
three wraps of rope on capstan drum when in use.
Heavier loads may require four wraps of rope.
Pump Requirements:
• 2 GPM @ 900 psi minimum pump capacity
• 12 GPM @ 1,500 psi recommended pump capacity
• 2,250 maximum psi
Shipping Weight: 60 lb
Torque:
• 80 lb/ft @ 1200 psi
• 100 lb/ft @ 1500 psi
Factory-Installed Options:
• Bayonet Output Shaft-HY3D/BAY
• Three-position, Four-Way Directional Control Valve

HY3D/BAY DRAWINGS
TOP VIEW
SIDE VIEW
FRONT VIEW

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


ACCESSORIES
pole mount adapter
POLE MOUNT ADAPTER
Sturdy steel construction with mounting bolts for bolting adapter
to winch frame. Comes complete with chain tightener for securing
to pole. Allows same base-mounted unit to be used in either installation.
Model No.
148353 Price: $748

receiver hitch mount
RECEIVER HITCH MOUNT
Bolts to the winch-hoist in order to mount the unit using a utility
truck's 2" receiver hitch. The mounting plate is shipped with
hardware, however the receiver hitch pin is not included.
Model No.
148452 Price: $201

Utility Hydraulic Capstan Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches,
Power Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source
for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart