FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

WC200-WALL CANTILEVER JIB CRANE

gorbel wc200 wall cantilever jib crane
200° ROTATION PERFORMANCE WALL CANTILEVER JIB CRANES

FOR MAXIMUM LIFT - The wall cantilever (WC200) provides hoist coverage for individual use in bays, along
walls or columns of plants, and as a supplement to an overhead crane or monorail system. This jib has the advantage
of providing maximum lift for the hoist, since it can be installed very close to the underside of the lowest ceiling
obstruction. Two key requirements must be met before applying the Wall Cantilever Series:

1. A structurally adequate wall or column to support the jib must exist.
2. Sufficient clearance above the boom throughout its arc must exist.
EASE OF MOVEMENT-*The fitting containing bronze bushings and oil-impregnated bronze thrust washers provide
for easy rotation and superior load positioning.
SAFETY - *Fabricated steel fittings provide excellent torsional rigidity.
*Pre-engineered for use with powered hoists. A factor of 15% of the jib crane capacity is allowed for the hoist and
trolley weight with an additional 25% of the capacity allowed for impact, thus giving maximum capacity use if the jib.
EASE OF INSTALLATION - *When the bracket center dimension is 6'0" or less, the mast/boom connection is
welded. This provides the most economical means of installation. When the bracket center is greater than 6'0", a bolted
mast/bppm connection is used, which enables the larger cranes to be shipped disassembled for ease of handling during
shipping and installation.
*Grease fittings are provided for easy field lubrication. CHART 1B - Boom Data
STANDARD BOOM DATA
Boom
Height (W)
Beam Size Flange
Width (in)
6" W6@12#/ft. 4"
8.125" W8@18#/ft. 5-1/4"
10.33" W10@26#/ft. 5-3/4"
12.5" W12@35#/ft. 6-1/2"
16.125" W16@45#/ft. 7"
18" W18@50#/ft. 7-1/2"
21" W21@62#/ft. 8-1/4"
24.125" W24@84#/ft. 9"
gorbel wc200 wall cantilever jib crane bracket fittings
TOP AND BOTTOM
BRACKET FITTINGS

gorbel wc200 wall cantilever jib crane dimensions
gorbel wc200 wall cantilever jib crane drawing
WC200-WALL CANTILEVER
WC200 THRUST AND PULL
Bolt Pattern E F G Hole Dia. Bolt Dia. Bracket Thickness
WC-B1 5" 3-1/2" 6" 11/16" 5/8" 1/2"
WC-B2 5" 4" 6" 13/16" 3/4" 5/8"
WC-B3 5" 4" 6" 13/16" 3/4" 3/4"
WC-B5 7" 6" 9" 1-5/16" 1-1/4" 1"
gorbel wc200 wall cantilever jib crane

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING
Cap.
Tons
A
Span
Model No. Bracket
Centers B
Wall To
Bracket F
Thrust &
Pull (lb.)
Ship Wt.
(Lbs.)
Price

 



1/4

8' WC200-B1-8-6 3'0" 3 1/2" 1767 250
$1,660
10' WC200-B1-10-6 3'0" 3 1/2" 2308 275
$1,698
12' WC200-B1-12-6 3'0" 3 1/2" 2867 310
$1,819
14' WC200-B1-14-7 3'0" 3 1/2" 3533 375
$1,844
16' WC200-B1-16-8 3'0" 3 1/2" 4285 475
$2,019
18' WC200-B1-18-8 4'0" 3 1/2" 3720 530
$2,135
20' WC200-B1-20-10 4'0" 3 1/2" 4595 750
$2,560

 



1/2

8' WC200-B1-8-7 3'0" 3 1/2" 3430 280
$1,784
10' WC200-B1-10-7 3'0" 3 1/2" 4455 315
$1,819
12' WC200-B1-12-7 3'0" 3 1/2" 5501 350
$1,942
14' WC200-B1-14-8 4'0" 3 1/2" 5001 455
$2,041
16' WC200-B1-16-10 4'0" 3 1/2" 6063 650
$2,576
18' WC200-B1-18-10 4'0" 3 1/2" 6979 700
$2,625
20' WC200-B1-20-12 6'0" 3 1/2" 5493 965
$3,014

 


1

8' WC200-B1-8-8 4'0" 3 1/2" 5047 350
$1,920
10' WC200-B1-10-10 5'0" 3 1/2" 5294 545
$2,086
12' WC200-B1-12-10 5'0" 3 1/2" 6526 570
$2,185
14' WC200-B1-14-10 5'0" 3 1/2" 7778 620
$2,304
16' WC200-B1-16-12 6'0" 3 1/2" 7678 875
$2,819
18' WC200-B1-18-W16 6'0" 3 1/2" 9148 1258
$3,414
20' WC200-B1-20-W16 6'0" 3 1/2" 10367 1357
$3,591

 



1-1/2

8' WC200-B2-8-10 3'0" 4" 10071 440
$2,533
10' WC200-B2-10-10 3'0" 4" 13023 485
$2,700
12' WC200-B2-12-12 4'0" 4" 12122 635
$2,990
14' WC200-B2-14-12 4'0" 4" 14429 698
$3,051
16' WC200-B2-16-12 5'0" 4" 13414 845
$3,428
18' WC200-B2-18-W18 6'0" 4" 13250 1450
$4,499
20' WC200-B2-20-W18 6'0" 4" 14967 1551
$4,712
Cap.
Tons
A
Span
Model No. Bracket
Centers B
Wall To
Bracket F
Thrust &
Pull (lb.)
Ship Wt.
(Lbs.)
Price

 



2

8' WC200-B2-8-12 4'0" 4" 10054 560
$3,049
10' WC200-B2-10-12 4'0" 4" 12998 620
$3,128
12' WC200-B2-12-W16 4'6" 4" 14409 960
$3,369
14' WC200-B2-14-W16 5'0" 4" 15442 1079
$3,758
16' WC200-B2-16-W18 6'0" 4" 15067 1350
$4,504
18' WC200-B2-18-W18 6'6" 4" 15892 1490
$5,016
20' WC200-B2-20-W21 7'6" 4" 15840 2030
$5,999

 



3

8' WC200-B3-8-W16 4'0" 4" 15060 802
$4,098
10' WC200-B3-10-W16 4'6" 4" 17300 896
$4,434
12' WC200-B3-12-W16 5'6" 4" 17389 985
$4,871
14' WC200-B3-14-W18 6'0" 4" 19017 1219
$5,233
16' WC200-B3-16-W18 7'6" 4" 17653 1505
$5,830
18' WC200-B3-18-W21 8'6" 4" 17982 1940
$6,461
20' WC200-B3-20-W21 9'6" 4" 18105 2640
$7,731

 



5

8' WC200-B5-8-W18 6'6" 6" 15323 1257
$6,942
10' WC200-B5-10-W18 6'6" 6" 19770 1353
$7,080
12' WC200-B5-12-W21 6'6" 6" 24379 1720
$7,319
14' WC200-B5-14-W21 7'6" 6" 25077 1920
$7,851
16' WC200-B5-16-W24 9'6" 6" 23230 2544
$8,919
18' WC200-B5-18-W24 9'6" 6" 26485 2500
$9,131
20' WC200-B5-20-W24 9'6" 6" 29769 2630
$9,442
The Model # designates the fitting size, span, and boom depth. Example: WC200-B3-10-W16 represents a Wall Cantilever jib crane with
a B3 bracket model, a span of 10 feet, and a boom depth of 16 inches.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

WALL CANTILEVER KITS
If you are ordering a complete crane model above, you do not need to order a wall cantilever kit as well.
Kits are used if you are buying your own I-beam and fabricating the crane yourself.

A wall cantilever kit consists of a top and bottom bracket and 8 A325 Grade 5 bolts for attaching the fittings to the mast
assembly. Each assembly includes a formed mounting channel, pivot bolts with lock washer and hex nut, fabricated pivot
assembly and thrust washer. The fabricated pivot assembly contains two (2) oilite thrust washers, two (2) bronze bushings,
a grease fitting, and a pre-drilled mounting plate to bolt the assembly to the flange of the jib crane mast. Note: Kits come
non-painted as standard.

The kits are used on one-quarter (1/4) ton, one-half (1/2) ton, one (1) ton, one and one-half (1 1/2) ton, two (2) ton,
and three (3) ton capacity WC200 Series jib cranes for spans ranging from 8' to 20'.
Capacity Model Weight (lbs.) Price
1/4, 1/2, 1 Ton WC-B1 76
$695
2 Ton WC-B2 118
$964
3 Ton WC-B3 161
$1,463
5 Ton Not available in Kit (Only Complete Crane)
DIMENSIONS BETWEEN BRACKETS MUST BE HELD TO THAT GIVEN IN OUR WC200 SERIES
CHART. We are not responsible for deviation from above capacity and span recommendations, variance
from our recommended limitations between brackets, overloading, or incorrect installation of crane.

Wall Cantilever Jib Crane, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes, Gorbel Cranes, Hoist,
and Jib Booms from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart