FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

WB100-WALL BRACKET JIB CRANE

200° ROTATION PERFORMANCE WALL
BRACKET JIB CRANES

THE ECONOMICAL SOLUTION
The Wall Bracket (WB100) jib is the most
economical means of providing hoist coverage
for individual use in bays, along walls or
columns of plants, or as a supplement to an
overhead crane or monorail system.
wb100 wall bracket jib crane
Two key requirements must be met before
applying the Wall Bracket Series:
1. A Structurally adequate wall or column to
    support the jib must exist.
2. Sufficient clearance above the boom throughout
    its arc to accommodate the tie rod suspension
    must exist.
EASE OF MOVEMENT
*Low dead weight of the boom combined with bronze
   bushings and oil-impregnated bronze thrust washers
   provides for easy rotation and superior load
   positioning.
top bracket fitting
SAFETY
*Formed bracket fittings provides for greater reliability. No welds in tension, all bolts
   are in double shear.
*Pre-engineered for use with powered hoists. A factor of 15% of the jib crane capacity
   is allowed for the hoist and trolley weight with an additional 25% of the capacity
   allowed for impact, thus giving maximum capacity use of the jib.
TOP BRACKET FITTING
EASE OF INSTALLATION beam bracket fitting
bottom bracket fitting
*Single tie rod, right hand threaded, at both ends for easy boom
  adjustment and installation.
*All connections bolted, including movable bolted, trolley stops.
*Grease fittings are provided for easy field lubrication.
BEAM BRACKET
FITTING
BOTTOM BRACKET
FITTING
thrust and pull diagram thrust and pull diagram
THE THRUST AND PULL DIAGRAM
Fittings are available for fabrication of cranes locally.

WB-100 WALL BRACKET DRAWING AND DIMENSIONS
CHART 1B - Boom Data
STANDARD BOOM DATA
Boom
Height (W)
Beam Size Flange
Width (in)
6" W6@12#/ft. 4"
8.125" W8@18#/ft. 5-1/4"
10.33" W10@26#/ft. 5-3/4"
12.5" W12@35#/ft. 6-1/2"
16.125" W16@45#/ft. 7"
18" W18@50#/ft. 7-1/2"
21" W21@62#/ft. 8-1/4"
24.125" W24@84#/ft. 9"
wall bracket drawing and dimensions
C = Cap Channel Length
TC (trolley coverage (distance
between endstops)) = Span - (E + 2 1/2")
ALL DIMENSIONS ARE IN INCHES.
HARDWARE FOR DETAIL "A" BY OTHERS
  E F G J (Hole Dia.) J (Bolt Dia.) K (Hole Dia.) K (Bolt Dia.) BT
WB-G1 13 1/2" 3 1/2" 3 1/2" 11/16" 5/8" 9/16" 1/2" 1/2"
WB-G2 13 1/2" 4" 4 1/8" 13/16" 3/4" 11/16" 5/8" 5/8"
WB-G3 14" 4" 4 5/8" 13/16" 3/4" 11/16" 5/8" 3/4"
WB-G5 15 1/4" 6" 7" 1 5/16" 1 1/4" 13/16" 3/4" 1"
wall bracket drawing and dimensions

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING
Cap.
Tons
A
Span
Model Number Bracket
Centers
B
F D Threaded
Tie Rod
Length
Tie
Rod
Dia.
Tie
Rod
Pitch
Cap
Channel
Lengths
Thrust
and
Pull (lb.)
Approx.
Ship
Wt. (lb)
Price








1/2
8' WB100-G1-8-6 2'9" 3-1/2" 1'3" 5'-10 1/4" 1" 8unc - 3709 265 $1,247
10' WB100-G1-10-6 3'0" 3-1/2" 1'6" 7'-7 1/4" 1" 8unc - 4408 300 $1,309
12' WB100-G1-12-6 3'9" 3-1/2" 1'9" 9'-6" 1" 8unc - 4347 335 $1,405
14' WB100-G1-14-6 4'6" 3-1/2" 2'0" 11'-4 3/4" 1" 8unc - 4317 375 $1,439
16' WB100-G1-16-6 5'6" 3-1/2" 2'0" 13'-7 1/2" 1" 8unc - 4109 410 $1,561
18' WB100-G1-18-7 6'0" 3-1/2" 2'0" 15'-8" 1" 8unc - 4380 495 $1,660
20' WB100-G1-20-8 6'6" 3-1/2" 2'3" 17'-5 1/2" 1" 8unc - 4658 600 $1,882
22' WB100-G1-22-8c8 7'0" 3-1/2" 2'3" 19'-6 1/4" 1" 8unc 18'9" 5130 905 $2,349
24' WB100-G1-24-8c8 7'6" 3-1/2" 2'6" 21'-4" 1" 8unc 20'6" 5350 975 $2,426
26' WB100-G1-26-10c6 8'0" 3-1/2" 2'6" 23'-4 1/2" 1" 8unc 22'6" 5795 1230 $2,885
28' WB100-G1-28-10c6 9'0" 3-1/2" 3'0" 25'-1 1/4" 1" 8unc 24'0" 5663 1315 $2,992
30' WB100-G1-30-12c8 10'0" 3-1/2" 3'6" 26'-10" 1" 8unc 25'6" 6009 1710 $3,491

 

 

 


1

8' WB100-G1-8-6 2'9" 3-1/2" 1'3" 5'-10 1/2" 1" 8unc - 7273 265 $1,247
10' WB100-G1-10-6 3'0" 3-1/2" 1'6" 7'-7 1/4" 1" 8unc - 8608 300 $1,271
12' WB100-G1-12-6 3'9" 3-1/2" 1'9" 9'-6" 1" 8unc - 8453 335 $1,405
14' WB100-G1-14-7 4'6" 3-1/2" 2'0" 11'-4 3/4" 1" 8unc - 8422 415 $1,488
16' WB100-G1-16-7 5'6" 3-1/2" 2'3" 13'-4 1/2" 1" 8unc - 7992 455 $1,618
18' WB100-G1-18-8 6'0" 3-1/2" 2'6" 15'-2 1/4" 1" 8unc - 8430 555 $1,725
20' WB100-G1-20-10 6'6" 3-1/2" 2'6" 17'-2 1/4" 1" 8unc - 8966 745 $1,998
22' WB100-G1-22-10c6 7'0" 3-1/2" 2'9" 19'-0 1/4" 1" 8unc 18'3" 9562 1065 $2,618
24' WB100-G1-24-10c6 7'6" 3-1/2" 2'9" 21'-1" 1" 8unc 20'3" 9877 1150 $2,707
26' WB100-G1-26-10c6 8'0" 3-1/2" 3'0" 22'-10 3/4" 1" 8unc 22'0" 10170 1230 $2,885
28' WB100-G1-28-12c8 9'0" 3-1/2" 3'6" 24'-7 1/4" 1" 8unc 23'6" 10286 1610 $3,296
30' WB100-G1-30-12c8 10'0" 3-1/2" 3'6" 26'-10" 1" 8unc 25'6" 10069 1710 $3,491

 

 

 


2

8' WB100-G2-8-8 2'9" 4" 1'3" 5'-11 1/4" 1.5" 6unc - 14469 375 $1,731
10' WB100-G2-10-8 3'0" 4" 1'6" 7'-8 1/4" 1.5" 6unc - 17107 435 $1,783
12' WB100-G2-12-8 3'9" 4" 1'9" 9'-7" 1.5" 6unc - 16780 495 $1,824
14' WB100-G2-14-8 4'6" 4" 2'0" 11'-5 3/4" 1.5" 6unc - 16578 550 $1,933
16' WB100-G2-16-10 5'6" 4" 2'3" 13'-5" 1.5" 6unc - 15864 720 $2,243
18' WB100-G2-18-10 6'0" 4" 2'3" 15'-5 3/4" 1.5" 6unc - 16552 795 $2,314
20' WB100-G2-20-12 6'6" 4" 2'6" 17'-3 1/4" 1.5" 6unc - 17348 1000 $2,618
22' WB100-G2-22-12c8 7'0" 4" 2'6" 19'-4" 1.5" 6unc 18'6" 18297 1420 $3,120
24' WB100-G2-24-12c8 7'6" 4" 3'0" 20'-11" 1.5" 6unc 20'0" 18836 1535 $3,246
26' WB100-G2-26-12c8 8'0" 4" 3'6" 22'-6" 1.5" 6unc 21'6" 19329 1650 $3,445
28' WB100-G2-28-12c8 9'0" 4" 3'6" 24'-8 1/2" 1.5" 6unc 23'6" 18686 1760 $3,558
30' WB100-G2-30-12c8 10'0" 4" 3'0" 27'-4 3/4" 1.5" 6unc 26'0" 18189 1895 $4,040

 

 

 


3

8' WB100-G3-8-8 2'9" 4" 1'3" 5'-11 1/2" 1.5" 6unc - 21596 435 $2,304
10' WB100-G3-10-8 3'3" 4" 1'6" 7'-9 1/4" 1.5" 6unc - 23545 490 $2,324
12' WB100-G3-12-10 4'0" 4" 1'9" 9'-8" 1.5" 6unc - 23557 630 $2,522
14' WB100-G3-14-10 4'9" 4" 2'0" 11'-6 3/4" 1.5" 6unc - 23514 700 $2,591
16' WB100-G3-16-12 5'6" 4" 2'3" 13'-5 1/2" 1.5" 6unc - 23500 765 $2,741
18' WB100-G3-18-12 6'3" 4" 2'3" 15'-6 3/4" 1.5" 6unc - 23672 950 $2,936
20' WB100-G3-20-12c8 7'0" 4" 2'6" 17'-5 1/2" 1.5" 6unc 16'6" 24037 1340 $3,495
22' WB100-G3-22-12c8 7'9" 4" 2'6" 19'-7 1/4" 1.5" 6unc 18'6" 24113 1450 $3,605
24' WB100-G3-24-12c8 8'6" 4" 3'0" 21'-3 1/4" 1.5" 6unc 20'0" 24197 1565 $3,823
26' WB100-G3-26-12c8 9'3" 4" 3'0" 23'-4 3/4" 1.5" 6unc 22'0" 24285 1940 $4,008
28' WB100-G3-28-12c8 10'0" 4" 3'0" 25'- 6 1/2" 1.5" 6unc 24'0" 24377 2065 $4,200
30' WB100-G3-30-12c10 11'0" 4" 3'0" 27'-9" 1.5" 6unc 26'0" 23917 2185 $4,325

 

 

 


5

8' WB100-G5-8-12 3'0" 6" 1'6" 5'-9 3/4" 2" 4.5unc - 33006 780 $4,456
10' WB100-G5-10-12 3'3" 6" 1'6" 7'- 9 1/2" 2" 4.5unc - 39258 860 $4,545
12' WB100-G5-12-12 4'0" 6" 1'9" 9'-8 1/4" 2" 4.5unc - 39072 940 $4,703
14' WB100-G5-14-12c8 4'9" 6" 2'0" 11'-7" 2" 4.5unc - 38972 1020 $4,800
16' WB100-G5-16-W16 5'6" 6" 2'6" 13'-2 1/4" 2" 4.5unc - 39229 1314 $5,141
18' WB100-G5-18-W16 6'3" 6" 3'0" 14'-10 1/4" 2" 4.5unc - 39246 1423 $5,247
20' WB100-G5-20-W16 7'0" 6" 3'6" 16'-6 1/4" 2" 4.5unc 15'3" 39877 1797 $5,705
22' WB100-G5-22-W16c12 7'9" 6" 3'6" 18'-7 3/4" 2" 4.5unc 17'3" 39987 1931 $5,828
24' WB100-G5-24-W16c12 8'6" 6" 3'6" 20'-9 1/2" 2" 4.5unc 19'3" 40108 2065 $6,048
26' WB100-G5-26-W16c12 9'3" 6" 3'6" 22'-11" 2" 4.5unc 21'3" 40239 2200 $6,131
28' WB100-G5-28-W16c12 10'0" 6" 3'6" 25'-0 3/4" 2" 4.5unc 23'3" 40375 2749 $8,857
30' WB100-G5-30-W16c12 11'0" 6" 3'6" 27'-3 1/2" 2" 4.5unc 25'3" 39597 2898 $9,091

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

WALL BRACKET KITS
If you are ordering a complete crane model above, you do not need to order a wall cantilever kit as well.
Kits are used if you are buying your own I-beam and fabricating the crane yourself.
The wall bracket kits consist of a top wall bracket, bottom wall bracket, and a beam bracket. The two (2) wall bracket
fittings have bronze thrust washers and bronze bushings with grease fittings. The top wall bracket and beam bracket
include a tie rod clevis.
The kits are available for one-half (1/2) ton, one (1) ton, two (2) ton, three (3) ton, and five (5) ton capacity WB100
Series Jib cranes, for spans ranging from 8' to 30'. A tie rod (not included) is used with these fittings.
FITTING KIT
Tie Rod
Dia.
*Tie Rod Price (Min. chg. of $92)
1"
$86 + $7.08/lin. ft.
1-1/2"
$82 + $11.26/lin. ft.
1-1/2"
$82 + $11.26/lin. ft.
2"
$82 + $19.16/lin. ft.
Cap.
Tons
Model No. Weight
(lbs.)
Price
1/2, 1 WB-G1 111
$735
2 WB-G2 133
$1,006
3 WB-G3 194
$1,448
5 WB-G5 425
$3,651
Hardware
Kit No.
Weight
(lb.)
Price
50017 4
$33.38
50018 10
$59.79
50019 10
$63.97
50020 22
$82.05
*Rnd. to nearest ft.
Standard: Non-painted
The hardware kit consists of hardware required to connect (a) the lower bracket and the end of beam bracket to the
S-Beam and (b) the hex nuts and lock washers to attach the tie rod to the clevis assemblies.
DIMENSIONS BETWEEN BRACKETS MUST BE HELD TO THAT GIVEN IN OUR WB100 SERIES
CHART. We are not responsible for deviation from above capacity and span recommendations, variance
from our recommended limitations between brackets, overloading, or incorrect installation of crane.

Wall Bracket Jib Crane, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes, Gorbel Cranes, Hoist, and Jib Booms from
your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart