|
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
|
|
|
Back to Product Category
UNICLAMPS
Lightweights - Middleweights - Heavyweights
|
|
|
|
Uniclamp
Welding Hold Down Clamp |
|
See
below for all models to suit your needs. |
|
|
|
|
|
WHAT
IT DOES: |
|
|
|
|
|
|
|
UNICLAMP
ELIMINATES THE GAP BETWEEN THE PLATE AND THE STIFFENER! |
|
|
|
|
|
|
|
This
conventional setup can take up to two hours to
complete, The process including welding lugs, dogs
and bridges in place - positioning awkward and heavy
equipment - then removing these setups and cleaning
up the attachment points. |
|
The UNICLAMP
takes less than 30 seconds to
set up - increasing productivity, safety and quality. |
|
|
|
|
|
HOW
IT WORKS: |
|
The
simple connection of a standard plant-supplied compressed air line and the
flick of a switch allows the clamps
built-in, high speed generator to create a powerful vacuum, permitting the
vacuum pads to immediately attach them-
selves directly to the work surface. The clamp manual screw or hydraulic
ram can then be operated to instantly secure
the proper alignment of parts. UNICLAMPS will meet your clamping requirements
without the tedious, time
consuming and sometimes dangerous paraphernalia associated with traditional
methods of fabrication assembly
techniques. NO MORE LUGS DOGS, BRIDGES, WEDGES, CHAINS, JACKS, C-CLAMPS,
TACK WELDS,
OR REGRINDING REQUIRED! |
|
UNICLAMPS
Are Powered by Compressed Air and Leave No Marks!
NOTE: UNICLAMPS ARE NOT DESIGNED FOR LIFTING PURPOSES. |
|
UNIVAC®
Vacuum Lifters are designed for efficient, one-person operation in lifts
of semi-porous and non-porous
material. Unlike magnets or edge grabs, vacuum units will not mark or scratch
material surfaces or edges. Additionally,
vacuum lifters can easily lift nonferrous metals and thin sheets (under
1/4"). |
|
|
|
Benefits
your company will receive with UNIVAC® Vacuum Lifters: |
Increase productivity, reducing cost.
One person operation.
Eliminate material damage.
Precision handling made easier. |
|
Versatile
handling of most materials.
Improve storage space.
Provide a low maintenance lifter.
Durable for long lasting service. |
|
|
|
ALL
UNIVAC® Lifters Have: |
Registered nameplates as required by ASME.
Rated capacities and product safety labels. |
|
|
|
UNIVAC®
Vacuum Lifters adhere to the highest quality standards in the industry
and all units conform to ASME
standards. All UNIVAC® Vacuum Lifters are designed with a 2 to 1
vacuum safety factor. |
|
|
|
Delivery
Program |
Look
for the red QUICKSHIP logo on our standard
products. The specific QUICKSHIP model number is shown
in red. QUICKSHIP products ship in 7 to 10 days (excluding weekends and holidays). |
|
|
|
Industry
Standard |
The
American Society of Mechanical Engineers (ASME) has developed standards
that apply specifically to these
types of devices. ASME B30.20 provides detailed information on the classifications,
marking, construction, installation,
inspection, testing maintenance and operation of below the hook lifting
devices. ASME BTH-1 provides detailed
information on the design criteria of below the hook lifting devices. These
standards serve as a guide to government
authorities, manufactures, purchasers and users of lifting devices. For
a summary of these standards, please click
on this link. |
|
|
|
|
|
|
|
|
|
THE
LIGHTWEIGHTS... |
|
|
|
|
WHD-1
and WHD-2 models are constructed of a high-strength aluminum bringing lightweight
portability to
workpiece positioning and clamping. |
|
|
|
|
The
UNICLAMPS have proved to be invaluable in transportation industry
applications. These easy to position
clamps are ideally suited for sheet and light plate fabrication. Lightweight
UNICLAMPS are used to secure skin
materials to ribbed structures at aircraft, aerospace, bus, trailer, and
truck manufacturing facilities. |
|
|
|
|
|
|
|
|
|
|
The
WHD-1 and WHD-2 UNICLAMPS feature capacities
up to 1,200 lbs with clamp weights not exceeding 16 lbs!
Features include round or rectangular vacuum pads, varying
headframe widths, and varying height under the ram to suit
special requirements. |
|
|
|
|
|
|
|
SPECIFICATIONS |
Model
No. |
Holding
Force
(lbs.) |
D
Height Under
Ram (in.) |
Dimensions (in.) |
Weight
(lbs.) |
Round
Vacuum Pads |
Rectangular
Vacuum Pads |
A |
B |
C |
A |
B |
C |
WHD-1 |
750 |
8-3/4 |
8-1/4 |
15-1/2 |
22-3/4 |
12 |
15-1/2 |
19 |
14 |
WHD-2 |
1200 |
8-3/4 |
5-7/8 |
15-1/2 |
25-1/8 |
12 |
15-1/2 |
19 |
16 |
|
NOTE: Weights and dimensions are approximate.
*Call sales department for a quote to your specifications. |
|
UNICLAMPS
Disassemble in Seconds Without Tools!
NOTE: UNICLAMPS ARE NOT DESIGNED FOR LIFTING PURPOSES. |
|
|
|
|
THE
MIDDLEWEIGHTS... |
|
|
|
|
|
|
|
Like
their smaller counterparts, the UNICLAMP
models WHD-18, WHD-24, WHD-32 and WHD-40
are constructed of high-strength aluminum affording these
clamps the identical advantage of reduced weight for
heavier duty positioning and clamping requirements. |
|
|
|
|
|
|
|
The
clamp models are used extensively in aircraft, ship
building, bridge construction, tank manufacturing and the
steel fabrication industry. They excel whenever larger
assemblies need to be drawn into alignment or held in
position for a welding process. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The
WHD-18 and WHD-24 UNICLAMP
features include round or rectangular vacuum pads,
varying headframe widths, and varying height under
the ram to suit special requirements. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WHD-32
and WHD-40 are available with
round, rectangular or square vacuum pads,
varying headframe widths, and varying height
under the ram to suit special requirements. |
|
|
|
|
|
|
|
|
|
|
|
SPECIFICATIONS |
Model
No. |
Holding
Force
(lbs.) |
D
Height Under
Ram (in.) |
Dimensions (in.) |
Weight
(lbs.) |
Round Vacuum Pads |
Rectangular Vacuum Pads |
A |
B |
C |
A |
B |
C |
WHD-18 |
1800 |
15-3/4 |
13-3/4 |
24 |
34-1/4 |
20 |
24 |
28 |
34 |
WHD-24 |
2400 |
15-3/4 |
12 |
24 |
36 |
19 |
24 |
29 |
36 |
WHD-32 |
3200 |
15-3/4 |
10 |
24 |
38 |
15 |
24 |
33 |
38 |
WHD-40 |
4000 |
15-3/4 |
8 |
24 |
40 |
15 |
24 |
33 |
42 |
|
NOTE: Weights and dimensions are approximate.
*Call sales department for a quote to your specifications. |
|
Concave
or Convex Surfaces, No Problem for UNICLAMPS!
NOTE: UNICLAMPS ARE NOT DESIGNED FOR LIFTING PURPOSES. |
|
THE
HEAVYWEIGHTS... |
|
|
|
|
|
UNICLAMP
steel constructed models WHD-60, WHD-80 and WHD-100 answer industrys
heaviest application
requirements. |
|
|
|
|
|
Used
in ship building, heavy plate fabrication, plant construction, bridge building,
large tank fabrication, these clamps
bring incredible amounts of clamping power to bear on the largest of fabrication
application requirements. These
easy-to-use, portable, high-speed clamps draw oversize materials into position
for welding, assembly or alignment
procedures. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The
WHD-60, WHD-80, and WHD-100 Welding and Fabrication Clamps, boast holding
force up to 10,000 lbs
with a venturi vacuum generator and a hydraulic powered ram as standard
features. Vacuum pads in round,
rectangular, or square are available to suit custom requirements. |
|
|
|
|
|
SPECIFICATIONS |
Model
No. |
Holding
Force
(lbs.) |
D
Height Under
Ram (in.) |
Dimensions (in.) |
Weight
(lbs.) |
Round Vacuum Pads |
Rectangular Vacuum Pads |
A |
B |
C |
A |
B |
C |
WHD-60 |
6000 |
24 |
19 |
31 |
50 |
17 |
26 |
35 |
165 |
WHD-80 |
8000 |
24 |
14 |
37 |
60 |
15 |
29 |
43 |
195 |
WHD-100 |
10000 |
30 |
12-1/2 |
40 |
67-1/2 |
17 |
38 |
59 |
245 |
|
NOTE: Weights and dimensions are approximate.
*Call sales department for a quote to your specifications. |
|
UNICLAMP
APPLICATIONS |
|
Whether
work surfaces are angled, inclined, right angles, convex or concave, UNICLAMPS
provide the best
solution for your positioning and clamping needs. |
|
|
|
Uniclamps, Lightweight Uniclamp,
Middleweight Uniclamp, Heavyweight Uniclamps, Welding Hold Down Clamp,
Welding Clamp, Securing Clamp, Aligning Clamp, Portable Clamp, High Speed
Clamps, and Assembly Clamps from
your source for material handling equipment. |
Back
to Product Category |
|
|