FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

TUFLEX POLYESTER ROUNDSLINGS
WITH HARDWARE / BRIDLE SLINGS

Features, Advantages and Benefits
Maintains all the basic Tuflex features plus...
bridle slings
Promotes Safety
Bridles provide better load control and balance.
Hardware avoids cutting and abrasion of sling at bearing points.
Saves Money
Reduced load damage - protected between pick -   up point and
  crane hook.
Saves Time

Lighter weight and easier to use and store than wire
  rope or chain slings.

Sling hooks quickly connect to loads having hoist rings or eye bolts.
tuflex polyester roundslings
How to Order Example:
DOS-EN-90 x 10' is a double leg bridle, oblong master
link, with sling hooks attached to each Tuflex EN 90.
Assembly length is 10 ft.

Specify:

1. Number of legs-
D (Double-2)
2. Master Link-O(Oblong)
3. Bottom Attachments-S (Sling Hook), O (Oblong)
4. Tuflex Code
5. Length of Assembly- Feet (Bearing point to bearing point)
Tuflex Size & Color One Leg
@90°
All Legs @ Hardware
60°
45°
30° Hook
A - Alloy
C - Carbon
Masterlink
Stock Dia.
(in.)
EN30 Purple   2,600 4,500 3,600 2,600 2TA 1/2
EN60 Green   5,300 9,100 7,400 5,300 4.5TA 3/4
EN90 Yellow   8,400 14,500 11,800 8,400 7TA 1
EN120 Tan   10,600 18,300 14,900 10,600 11TA 1 1/4
EN150 Red   13,200 22,800 18,600 13,200 11TA 1 1/4
EN180 White   16,800 29,100 23,700 16,800 15TA 1 1/2
EN240 Blue   21,200 36,700 29,900 21,200 22TA 1 1/2
EN360 Grey   31,000 53,700 43,800 31,000 20TC 2
EN600 Brown   53,000 91,800 74,900 53,000 30TC 2 1/2
EN800 Olive   66,000 114,300 93,300 66,000 40TC 3
EN1000 Black   90,000 155,800 127,200 90,000 - 3 1/4
* Always protect roundslings from corners, edges, or protrusions. Refer to the Sling Protection section below
to choose the right protection product for your lift.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


*Contact Us For Special Lengths*
PRICING
DOUBLE LEG DOO
Part No. EN30 EN60 EN90 EN120 EN150 EN180 EN240
3' base
N/A
N/A
N/A
N/A
4'
N/A
N/A
N/A
N/A
5'
N/A
N/A
N/A
N/A
6'
N/A
N/A
N/A
N/A
7'
N/A
N/A
N/A
N/A
8'
N/A
N/A
N/A
N/A
9'
N/A
N/A
N/A
N/A
10'
N/A
N/A
N/A
N/A
11'
N/A
N/A
N/A
N/A
12'
N/A
N/A
N/A
N/A
13'
N/A
N/A
N/A
N/A
14'
N/A
N/A
N/A
N/A
15'
N/A
N/A
N/A
N/A
16'
N/A
N/A
N/A
N/A
17'
N/A
N/A
N/A
N/A
18'
N/A
N/A
N/A
N/A
19'
N/A
N/A
N/A
N/A
20'
N/A
N/A
N/A
N/A
21'
N/A
N/A
N/A
N/A
22'
N/A
N/A
N/A
N/A
23'
N/A
N/A
N/A
N/A
24'
N/A
N/A
N/A
N/A
25'
N/A
N/A
N/A
N/A
26'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
27'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
28'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
29'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
30'
N/A
N/A
N/A
N/A
N/A
N/A
N/A

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


*Contact Us For Special Lengths*
DOUBLE LEG DO
Part No. EN30 EN60 EN90 EN120 EN150 EN180 EN240
3' base
N/A
N/A
N/A
N/A
4'
N/A
N/A
N/A
N/A
5'
N/A
N/A
N/A
N/A
6'
N/A
N/A
N/A
N/A
7'
N/A
N/A
N/A
N/A
8'
N/A
N/A
N/A
N/A
9'
N/A
N/A
N/A
N/A
10'
N/A
N/A
N/A
N/A
11'
N/A
N/A
N/A
N/A
12'
N/A
N/A
N/A
N/A
13'
N/A
N/A
N/A
N/A
14'
N/A
N/A
N/A
N/A
15'
N/A
N/A
N/A
N/A
16'
N/A
N/A
N/A
N/A
17'
N/A
N/A
N/A
N/A
18'
N/A
N/A
N/A
N/A
19'
N/A
N/A
N/A
N/A
20'
N/A
N/A
N/A
N/A
21'
N/A
N/A
N/A
N/A
22'
N/A
N/A
N/A
N/A
23'
N/A
N/A
N/A
N/A
24'
N/A
N/A
N/A
N/A
25'
N/A
N/A
N/A
N/A
26'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
27'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
28'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
29'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
30'
N/A
N/A
N/A
N/A
N/A
N/A
N/A

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


*Contact Us For Special Lengths*
DOUBLE LEG DOS
Part No. EN30 EN60 EN90 EN120 EN150 EN180 EN240
3' base
N/A
N/A
N/A
N/A
4'
N/A
N/A
N/A
N/A
5'
N/A
N/A
N/A
N/A
6'
N/A
N/A
N/A
N/A
7'
N/A
N/A
N/A
N/A
8'
N/A
N/A
N/A
N/A
9'
N/A
N/A
N/A
N/A
10'
N/A
N/A
N/A
N/A
11'
N/A
N/A
N/A
N/A
12'
N/A
N/A
N/A
N/A
13'
N/A
N/A
N/A
N/A
14'
N/A
N/A
N/A
N/A
15'
N/A
N/A
N/A
N/A
16'
N/A
N/A
N/A
N/A
17'
N/A
N/A
N/A
N/A
18'
N/A
N/A
N/A
N/A
19'
N/A
N/A
N/A
N/A
20'
N/A
N/A
N/A
N/A
21'
N/A
N/A
N/A
N/A
22'
N/A
N/A
N/A
N/A
23'
N/A
N/A
N/A
N/A
24'
N/A
N/A
N/A
N/A
25'
N/A
N/A
N/A
N/A
26'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
27'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
28'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
29'
N/A
N/A
N/A
N/A
N/A
N/A
N/A
30'
N/A
N/A
N/A
N/A
N/A
N/A
N/A

Sling Protection
CUT AND WEAR PROTECTION
Selection of Sling Protection Products
Sling protection products need to be used in applications where sling
damage may occur. Cutting of synthetic slings during use is the number
one cause of sling accidents. A variety of factors influence sling
protection performance. Since no material is fully cut proof, a qualified
person must select materials and methods that adequately protect
slings from edges or surfaces. We can assist customers with their
product selections.
Cut Protection versus Wear Protection
Our sling protection products are divided into two categories, Cut Protection and Wear Protection. Cut Protection
Products are designed to improve workplace safety. When placed between slings and edges, cut protection products
act as a buffer to prevent sling cutting and to reduce bearing pressure levels at contact areas. Wear protection
products serve to extend sling life by reducing abrasive wear and prevent marring of the load surfaces.
The following table provides comparative sling protection performance for standard products.
Performance Rating: The bar graphs shown above reflect the comparative performance of Our Cut Protection
products against commonly used loose and sewn-on types of Wear Protection products.
Test Lift Qualification: To validate the suitability of sling protection products for each application, always
complete one or more test lifts in a non-consequence manner.
Technical Bulletin MS-10 available for additional information.

EFFECT OF SLING ANGLE
Using slings at an angle can become deadly if that angle is not taken into consideration when selecting the sling to
be used. The tension on each leg of the sling is increased as the angle of lift, from horizontal, decreases. It is most
desirable for a sling to have a larger angle of lift, approaching 90°. Lifts with angles of less than 30° from horizontal
are not recommended. If you can measure the angle of lift or the length and height of the sling as rigged, you can
determine the properly rated sling for your lift. The Increased Tension method provides the increased tension as a
function of the sling angle. Alternatively, the sling Reduced Capacity method may be used to determine reduced lift
capacity for any angle.
INCREASED TENSION
Determine capacity
of sling needed
choker hitch
REDUCED CAPACITY
Calculate rating of each sling
rigged at this angle
1. Determine the load weight (LW). 1. Calculate the reduction factor (RF).
a. Using the angle from horizontal,
    read across the Angle Chart to
    the corresponding number of the
   Reduction Factor column.
2. Calculate the Tension Factor [TF].
a. Determine the sling angle as mea-
    sured from the horizontal, and the
    corresponding tension factor (TF)
    from the effect of angle chart.
-OR-
b. Divide sling height* (H) by sling
    length* (L).
-OR-
b. Length* (L) divided by height*
    (H)
2. Reduction factor (RF) x the sling’s
    rated capacity for the type hitch that
    will be used = sling’s reduced rating.
3. Determine the share of the load
    applied to each sling leg (LW).
4. Multiply (LW) by (TF) to determine
    the sling leg tension. The capacity of
    the selected sling or sling leg must
    meet the calculated tension value.
*Measured from a common horizontal
plane to the hoisting hook.
*Measured from a common horizontal plane
to the hoisting hook.
Effect of Angle Chart
slings
Tension
Factor (TF)
Angle From
Horizontal
Reduction
Factor (RF)
1.000 90º 1.000
1.004 85º 0.996
1.015 80º 0.985
1.035 75º 0.966
1.064 70º 0.940
1.104 65º 0.906
1.155 60º 0.866
1.221 55º 0.819
1.305 50º 0.766
1.414 45º 0.707
1.555 40º 0.643
1.742 35º 0.574
2.000 30º 0.500
Example:
Vertical Choker rating of each sling:
6,000 lbs.
Measured Length (L) = 6 ft.
Measured Height (H) = 4 ft.
Reduction Factor (RF) = 4 (H) ÷ 6 (L) = .667
Example:
Load weight = 1,000 lbs.
Rigging - 2 slings in vertical hitch
Lifting Weight (LW) per sling = 500 lbs.
Measured Length (L) = 10 ft.
Measured Height (H) = 5 ft.
Tension Factor (TF) = 10 (L) ÷ 5 (H) = 2.0
Minimum Vertical Rated Capacity required
for this lift = 500 (LW) x 2.0 (TF) = 1000 lbs.
per sling
Sling capacity decreases as the angle
from horizontal decreases. Sling angles
of less than 30° are not recommended.
Reduced sling rating in this configuration
= .667
(RF) x 6,000 lbs. = 4,000 lbs. of lifting
capacity per sling

Tuflex Polyester Roundslings with Hardware/Bridle Slings, Lifting Slings, Lift-All, Bridles, Master-Link, Oblong,
Sling Hook, and Double Leg Bridle from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart