FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

SBC SERIES CLEAN ROOM BALANCER

sbc series clean room balancers balancers
The SBC-15 is a "clean room" tool balancer used in production of electronics,
pharmaceuticals, and other environmentally sensitive components. Its specially
sealed aluminum case provides a Class 10 protection rating which meets most
clean room requirements. The cable is sheathed in nylon to prevent metal flaking
and contamination of the clean environment. It can be used with a multitude of
tools including torque drivers and vacuum pin setters. Like the EKN series, these
balancers can be fitted with a grounding wire to dissipate static electricity.
Exclusive 18 Month
Warranty

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICE
Model No. Capacity Range (lb) Cable Travel (ft) Cable Dia. (in) Wt (lb) PRICES
SBC-15 1.1 to 3.3 3.28 0.12 2.6 $924
Features and Benefits
Advantages of Using an ENDO Spring Balancer:
ENDO Spring Balancers are a valuable addition to your
assembly line. They support heavy tools with cable tension
equal to the weight of the suspended tools, which makes
them seem virtually "weightless". As the tool is repositioned
the balancer extends or retracts the support cable to follow
the tool's movements. Constant tension on the cable is
accomplished with a spring motor and a tapered drum.
The assembler has the flexibility to reposition the tool, while
experiencing comfortable operation and less fatigue. Similar
to a Balancer is the Retractor, which does not have a
tapered drum. The tension on the cable increases as the
cable is extended
• Suspend tools in assembly lines or other work areas
• Help the assembler with repetitive tasks such as
   installing fasteners: screws, nuts, bolts, etc.
• Hold fixtures, tools, welding guns, and similar
   equipment
• Improves efficiency and diminishes worker fatigue
• Stabilizes tool positioning and contributes to work
   accuracy
• Contributes to a safer working environment
• Keeps fixtures, tools, and welding guns off of the floor
   and clean.
• Eliminates the need to separately power the balancer
Application Guidelines
• Size the balancer to carry the total weight to be balanced - tool plus all accessories - and stroke (maximum to
   minimum height) required.
• Size to the upper end of the capacity range of the balancer when possible.
• Always attach secondary support cable(s) to the eyelet provided for additional safety.
• Balancers are normally hung vertically and the rope is pulled out vertically. To prevent the rope from wearing on the
   guide, the rope should not be pulled out at an angle to the balancer body. The balancer can also be mounted
   horizontally, however a pulley system must be employed to guide the rope straight out of the balancer then down to
   the tool. Again, care must be taken to prevent the rope from wearing on the guide. A trolley and rail system can be
   used to help the balancer adjust to changing angles.
• If multiple balancers are used in close together, install them at staggered heights to keep them from hitting each other
• The spring tension is factory preset to the mid-range of the rated capacity. To adjust the tension turn the worm gear
   or spindle clockwise to increase the tension and counterclockwise to decrease the tension.
Clean Room Balancer, Clean Room Tool Balancer, Cleanroom Spring Balancer, Clean Room Retractor, Clean Room
Tool Positioner, Spring Retractor, Tool Balancer, Spring Balancer, and Cleanroom Torque Reel from your source for
material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart