|
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
|
|
|
Back to Product Category
TCR
SERIES AIR POWERED HOIST
|
HOOK,
MOTORIZED, PUSH AND GEARED TROLLEY SUSPENSION |
|
|
|
|
|
The
TCR Series air hoists offer the benefit of lifting heavier loads while maintaining
low headroom and a
continuous duty cycle. These hoists are best suited for use in foundries,
assembly lines, construction sites
and many other demanding applications. |
|
|
|
Features
and Benefits |
|
|
|
|
|
|
|
|
|
Unlimited
Duty Cycle
For continuous operation
Spring-Loaded Multi-Vane Motor Design
Permits very fine feathering control
High Strength Cast Iron Housing
Proven weather resistant and durable
in harsh environments
Airtight Hoist
Results in efficient use of air
Comfortable Noise Levels
External muffler reduces noise level to
80dBA @ 1 yd. with no load
Heavy Duty Self-Adjusting Brake
For precise braking action
Standard Upper & Lower Limit Stops
Prevents over-travel of hook in either direction
Overload Limiter
Adjustable load limiter detects overload
automatically and blocks air flow for lifting
Wear Resistant Load Chain
Grade 80, case-hardened for
superior strength |
|
|
|
|
|
Standard
Hoist Specifications |
|
Capacity
Range
1/4 2 Ton
Standard Lift
10'
(longer lifts available)
Standard Pendant or Cord Length
Hangs approximately 4' above the
hoist's fully extended bottom hook
(longer lengths available)
Air Supply Requirement
48 90 cfm at 60 90 psi
Air Lubrication Requirement
Minimum 10 to 15 drops of oil
per minute (0.2 0.3 cc/min.) |
Air
Filtration
Maximum 5 micron air filter
or finer required
Air Inlet Port
1/2" NPT
Air Supply Hose Minimum Size
1/4 2 Tons 1/2"
Operating Conditions
Temperature range +14° to 140°F
Humidity 85% or less
Chain Containers
Optional
Canvas or Steel |
|
|
|
TCR
Air Powered Hoists with Pendant and Cord Controls and Hook Suspension |
|
PENDANT
MODELSPECIFICATIONS |
Model |
Cap.
(tons) |
Std.
Lift (ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @90psi |
Up/Down
Air Consumption Rates
(cubic ft/min @90 psi) |
Load
Chain
Dia. x Chain
Fall
Lines |
Net Wgt.
(lbs) |
Wgt.
for
Add.
One Foot
of Lift
(lbs) |
No Load |
Full Load |
No Load |
Full Load |
TCR-250P |
1/4 |
10 |
7.5 |
68
/ 44 |
52
/ 51 |
63
/ 49 |
48
/ 57 |
6.3x1 |
68 |
0.6 |
TCR-500P |
1/2 |
10 |
7.5 |
68
/ 44 |
37
/ 57 |
63
/ 49 |
48
/ 57 |
6.3x1 |
68 |
0.6 |
TCR-1000P2 |
1 |
10 |
7.5 |
34
/ 22 |
19
/ 29 |
63
/ 49 |
48
/ 57 |
6.3x2 |
78 |
1.2 |
TCR-1000P |
1 |
10 |
7.5 |
37
/ 22 |
21
/ 33 |
62
/ 53 |
53
/ 60 |
7.1x1 |
77 |
0.8 |
TCR-2000P2 |
2 |
10 |
7.5 |
19
/ 11 |
11
/ 16 |
62
/ 53 |
53
/ 60 |
7.1x2 |
88 |
1.5 |
|
|
TCR
SERIES - PENDANT DIMENSIONS |
|
|
PENDANT
MODELDIMENSIONS |
Model |
Cap.
(tons) |
Headroom
C (in) |
a
(in) |
b
(in) |
d
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
TCR-250P |
1/4 |
18.2 |
13.5 |
6.9 |
6.1 |
6.6 |
1.2 |
4.9 |
2.0 |
1.3 |
TCR-500P |
1/2 |
18.2 |
13.5 |
6.9 |
6.1 |
6.6 |
1.2 |
4.9 |
2.0 |
1.3 |
TCR-1000P2 |
1 |
20.4 |
13.5 |
7.7 |
6.1 |
6.6 |
1.2 |
5.9 |
1.9 |
2.2 |
TCR-1000P |
1 |
18.3 |
13.5 |
6.9 |
6.1 |
6.6 |
1.2 |
4.9 |
2.0 |
1.3 |
TCR-2000P2 |
2 |
21.8 |
13.5 |
8.0 |
6.1 |
6.6 |
1.2 |
6.0 |
2.0 |
2.3 |
|
SEE
BOTTOM TABLE FOR PRICING |
|
CORD
MODELSPECIFICATIONS |
Model |
Cap.
(tons) |
Std.
Lift
(ft.) |
Cord
L
(ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consumption Rates
(cubic ft/min @90 psi) |
Load
Chain
Dia. x
Chain
Fall
Lines |
Net
Wgt.
(lbs) |
Wgt.
For
Add One
Foot
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
TCR250C |
1/4 |
10 |
7.5 |
68
/ 44 |
52
/ 51 |
63
/ 49 |
48
/ 57 |
6.3x1 |
66 |
0.6 |
TCR500C |
1/2 |
10 |
7.5 |
68
/ 44 |
37
/ 57 |
63
/ 49 |
48
/ 57 |
6.3x1 |
66 |
0.6 |
TCR1000C2 |
1 |
10 |
7.5 |
34
/ 22 |
19
/ 29 |
63
/ 49 |
48
/ 57 |
6.3x2 |
76 |
1.2 |
TCR1000C |
1 |
10 |
7.5 |
37
/ 22 |
21
/ 33 |
62
/ 53 |
53
/ 60 |
7.1x1 |
75 |
0.8 |
TCR2000C2 |
2 |
10 |
7.5 |
19
/ 11 |
11
/ 16 |
62
/ 53 |
53
/ 60 |
7.1x2 |
86 |
1.5 |
|
|
TCR
SERIES - CORD DIMENSIONS |
|
CORD
MODELDIMENSIONS |
Model |
Cap.
(tons) |
Headroom
C (in) |
a
(in) |
b
(in) |
d
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
TCR250C |
1/4 |
18.2 |
13.5 |
6.9 |
6.1 |
6.6 |
1.2 |
4.9 |
2.0 |
1.3 |
8.3 |
TCR500C |
1/2 |
18.2 |
13.5 |
6.9 |
6.1 |
6.6 |
1.2 |
4.9 |
2.0 |
1.3 |
8.3 |
TCR1000C2 |
1 |
20.4 |
13.5 |
7.7 |
6.1 |
6.6 |
1.2 |
5.9 |
1.9 |
2.2 |
8.3 |
TCR1000C |
1 |
18.3 |
13.5 |
6.9 |
6.1 |
6.6 |
1.2 |
4.9 |
2.0 |
1.3 |
8.3 |
TCR2000C2 |
2 |
21.8 |
13.5 |
8.0 |
6.1 |
6.6 |
1.2 |
6.0 |
2.0 |
2.3 |
8.3 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR AIR HOIST - TCR SERIES |
|
HOOK
MOUNT |
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Extra
Lift (ft) |
Up |
Down |
Cord |
Net
Weight
(lbs) |
Pendant |
Net
Weight
(lbs) |
Load
Chain |
Cord |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
1/4 |
TCR250C/P |
52 |
68 |
51 |
44 |
10 |
|
66 |
|
68 |
$19.49 |
|
|
1/2 |
TCR500C/P |
37 |
68 |
57 |
44 |
10 |
|
66 |
|
68 |
1 |
TCR1000C/P-2 |
19 |
34 |
29 |
22 |
10 |
|
76 |
|
78 |
|
1 |
TCR1000C/P |
21 |
37 |
33 |
22 |
10 |
|
75 |
|
77 |
|
2 |
TCR2000C/P-2 |
11 |
19 |
16 |
11 |
10 |
|
86 |
|
88 |
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook. For lift, cord and pendant length limitations,
consult us. Maximum pendant drop is 40 ft. |
* WACSP - additional assembly charge - $263.10.
applies for any special pendant length shorter or longer than our standard
drop. |
C
= cord control P = pendant control |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
TCR
SERIES - OPTIONS |
|
|
|
|
Code
9013129 - In-Line Filter / Lubricator Kit ......................................................................... |
$671.70 ea. |
(For
portable hoist applications) |
|
|
|
|
|
|
|
Code
6041303 - Lubricator Kit - for cord and pendant models ................................................. |
$435.80 ea. |
(Kit
includes the lubricator, mounting bracket and mounting hardware) |
|
|
|
|
|
Code
6041302 - Filter / Lubricator Kit - for cord and pendant models ...................................... |
$661.60 ea. |
(Kit
includes the filter, lubricator, mounting bracket and mounting hardware) |
|
|
|
|
|
Code
6041301 - Filter / Regulator / Lubricator Kit - for cord and pendant models
..................... |
$815.20 ea. |
(Kit
includes the filter, regulator, lubricator, mounting bracket and mounting
hardware) |
|
|
|
|
|
|
Note:
All Air Hoists require 5 micron filter and lubricator capable of delivering
10 to 15 drops
of oil per minute to the hoist. Lubricator must be located within 15 feet
of the hoist. |
|
|
|
|
Code
RTR4B - Air Hose Hangers ............................................................................................... |
$43.70 ea. |
(Supports
air hose .75 to 1.25 in. diameter. Runs on guide wire sold separately) |
|
|
|
|
|
Air
Hose Trolleys ........................................................................................................................ |
$113.55 ea. |
(Supports
air hose .75 to 1.25 in. diameter. Runs on monorail beam - advise beam flange
when ordering) |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
Canvas
Chain Containers for TCR Cord and Pendant Models |
|
Cap. (Tons) |
Product Code |
Price |
Max. Lift (ft.) |
1/4 |
60395 |
|
68 |
1/2 |
60395 |
68 |
1 (2 falls) |
60395 |
34 |
1 |
60395 |
50 |
2 (2 falls) |
60395 |
25 |
|
|
|
TCR
AIR POWERED HOISTS WITH AIR POWERED TROLLEYS |
TCR
hoists will couple with our air powered trolleys for added mobility. The
MCR air powered trolley is
the ideal choice for transporting medium to heavy loads in construction
and foundry applications. |
|
|
|
|
|
|
|
Features
and Benefits |
|
|
|
|
|
Air
Powered Trolleys |
|
Unlimited
Duty Cycle
For continuous operation
Spring-Loaded Multi-Vane Motor Design
Permits smooth operation and controlled travel
High Strength Cast Iron Housing
Proven weather resistant and durable in harsh environments
Internal Disc Brake
Protected from harsh environments
Drop Stops & Rubber Bumpers
To ensure safe operation
Side Guide Rollers
Provide additional stability and smooth travel
Versatile Wheels
Fit flat or tapered beam flange
Trolley Muffler
Produces low noise levels |
|
|
|
|
|
Standard
Hoist Specifications |
|
|
|
|
|
Capacity
Range
1/4 2 Ton
Control Option on Trolley/Hoist
Pendant control only
Standard Pendant Length
Hangs approximately 4' above the
hoist's fully extended bottom hook
(longer lengths available
maximum 30')
Air Supply Requirement
53 cfm at 60 90 psi
Air Lubrication Requirement
Minimum 10 to 15 drops of oil
per minute (0.2 0.3 cc/min.) |
|
Air
Filtration
Maximum 5 micron air filter or
finer required
Air Inlet Port
3/4" NPT
Air Supply Hose Minimum Size
1/4 2 Tons 1/2"
Operating Conditions
Temperature range +14° to 140°F
Humidity 85% or less |
|
|
|
|
|
|
|
|
TCR
Air Powered Hoists with Air Powered Trolley |
|
PENDANT
MODEL W/AIR POWERED TROLLEY SPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Traversing
Speed
(ft/min) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adj.
B (in) |
Min.
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add. 1'
of Lift
(lbs) |
TCR |
MCR
|
No
Load |
Full
Load |
No
Load Full
Load
|
No
Load |
Full
Load |
1/4 |
TCRM250P |
10 |
7.4 |
68
/ 44 |
52
/ 51 |
65 |
63
/ 49 |
48
/ 57 |
53 |
2.28
OR
5.00 |
137.8 |
6.3x1 |
170 |
0.6 |
1/2 |
TCRM500P |
68
/ 44 |
37
/ 57 |
63
/ 49 |
48
/ 57 |
6.3x1 |
170 |
0.6 |
1 |
TCRM1000P-2 |
34
/ 22 |
19
/ 29 |
63
/ 49 |
48
/ 57 |
6.3x2 |
183 |
1.2 |
1 |
TCRM1000P |
37
/ 22 |
21
/ 33 |
62
/ 53 |
53
/ 60 |
7.1x1 |
209 |
0.8 |
2 |
TCRM2000P-2 |
18.5
/ 11 |
11
/ 16 |
62
/ 53 |
53
/ 60 |
3.94
to 6.02 |
51.2 |
7.1x2 |
254 |
1.5 |
|
|
|
|
PENDANT
MODEL W/AIR POWERED TROLLEYSDIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
b
(in) |
b'
(in) |
d
(in) |
e
(in) |
e'
(in) |
g
(in) |
i
(in) |
j
(in) |
k
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
1/4 |
TCRM250P |
19.3 |
12.4 |
15.6 |
10.3 |
6.2 |
3.7 |
1.2 |
3.7 |
0.9 |
4.8 |
4.6 |
4.4 |
2.0 |
1.2 |
1/2 |
TCRM500P |
19.3 |
12.4 |
15.6 |
10.3 |
6.2 |
3.7 |
1.2 |
3.7 |
0.9 |
4.8 |
4.6 |
4.4 |
2.0 |
1.2 |
1 |
TCRM1000P-2 |
21.5 |
12.4 |
15.6 |
10.3 |
6.2 |
3.7 |
1.2 |
3.7 |
0.9 |
4.8 |
4.6 |
4.4 |
2.0 |
1.2 |
1 |
TCRM1000P |
19.5 |
12.4 |
15.6 |
10.3 |
6.2 |
3.7 |
1.2 |
3.7 |
0.9 |
4.8 |
4.6 |
4.4 |
2.0 |
1.2 |
2 |
TCRM2000P-2 |
23.3 |
12.4 |
17.4 |
10.5 |
6.9 |
3.9 |
1.2 |
4.9 |
1.3 |
5.0 |
5.1 |
5.5 |
2.8 |
1.7 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
PRICING
FOR AIR POWERED TROLLEY HOISTS - TCRM SERIES |
|
|
|
PENDANT
CONTROL |
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Net
Weight
10' lift
(lbs) |
Extra
Lift (ft) |
Up |
Down |
Load
Chain |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
1/4 |
TCRM250P |
52 |
68 |
51 |
44 |
10 |
|
76 |
$19.49 |
|
1/2 |
TCRM500P |
37 |
68 |
57 |
44 |
10 |
|
76 |
1 |
TCRM1000P-2 |
19 |
34 |
29 |
22 |
10 |
|
94 |
|
1 |
TCRM1000P-2 |
21 |
37 |
33 |
22 |
10 |
|
91 |
|
2 |
TCRM2000P-2 |
11 |
19 |
16 |
11 |
10 |
|
113 |
|
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook. For lift, cord and pendant length limitations,
consult us. Maximum pendant drop is 32 ft. |
|
* WACSP - additional assembly charge - $339.80.
applies for any special pendant length shorter or longer than our standard
drop. |
|
P = pendant control |
|
|
|
Canvas
Chain Containers for TCRM Pendant Models |
|
Cap. (Tons) |
Product Code |
Price |
Max. Lift (ft.) |
1/4 |
60395 |
|
68 |
1/2 |
60395 |
68 |
1 (2 falls) |
60395 |
34 |
1 |
60395 |
50 |
2 (2 falls) |
60395 |
25 |
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
TCRM
Series Options - Filter / Regulator / Lubricator Kits |
|
Code |
For
Trolley / Hoist |
Description* |
Price |
6075601 |
MCR1000
with
TCR250/500/1000-2/1000 |
F/R/L |
|
6075602 |
|
F/L |
6075603 |
L |
|
6075604 |
MCR3000
with
TCR2000-2 |
F/R/L |
|
6075605 |
F/L |
|
6075606 |
L |
|
|
|
*L
= Lubricator Kit (kit includes the lubricator, mounting bracket and mounting
hardware)
*F/L = Filter / Lubricator Kit (kit includes the filter, lubricator, mounting
bracket and mounting hardware)
*F/R/L = Filter / Regulator / Lubricator Kit (kit includes the filter, regulator,
lubricator, mounting bracket and mounting hardware) |
|
|
MCR
MOTORIZED TROLLEY SHAFT EXTENDERS |
|
Cap.
(Tons) |
Std.
Flange Width (in.) |
Flange
Width w/Est. Shaft (in.) |
Price |
1/4
- 1 |
2.28
- 5.00 |
5.01
- 6.02 |
|
|
6.03
- 12.00 |
2 |
3.94
- 6.02 |
6.03
- 7.02 |
|
7.03
- 12.00 |
|
|
|
For
flange ranges beyond this chart, consult us.
Pricing applies only when purchased with MCR trolley. |
|
|
TCR
AIR POWERED HOISTS WITH PUSH TROLLEYS |
TCR
hoists will couple with our push trolleys for added mobility. The economical
PT manual trolleys
are perfect for lighter, infrequent moves and in small workshops. |
|
|
|
|
|
Features
and Benefits |
|
|
|
Manual Trolleys |
|
Shafts
Standard shafts fit wide range of beams
Longer shafts available for larger beams
Spacers for easy adjustments
Wheels
All steel
Sealed ball bearings
Fit flat or tapered beam flange |
|
|
|
Standard
Hoist Specifications |
|
Capacity
Range
1/4 2 Ton
Control Option on Hoist
TCRP and TCRG Pendant and cord
Standard Hand Chain Length
On geared trolleys Hangs approximately
2' less than fully extended bottom hook
(longer lengths available) |
|
|
|
|
|
TCR
Air Powered Hoists with Push Trolley - Specs & Dimensions |
|
PENDANT
MODEL WITH PUSH TROLLEYSPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add. 1'
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
1/4 |
TCRP250P |
10 |
7.5 |
68
/ 44 |
52
/ 51 |
63
/ 49 |
48
/ 57 |
2.28
to 4.00 |
4.01
to 8.00
or 8.01 to 12.00 |
13.8 |
6.3x1 |
76 |
0.6 |
1/2 |
TCRP500P |
68
/ 44 |
37
/ 57 |
63
/ 49 |
48
/ 57 |
6.3x1 |
76 |
0.6 |
1 |
TCRP1000P2 |
34
/ 22 |
19
/ 29 |
63
/ 49 |
48
/ 57 |
2.28
to 5.00 |
5.01
to 8.00
or 8.01 to 12.00 |
17.7 |
6.3x2 |
94 |
1.2 |
1 |
TCRP1000P |
37
/ 22 |
21
/ 33 |
62
/ 53 |
53
/ 60 |
7.1x1 |
91 |
0.8 |
2 |
TCRP2000P2 |
18.5
/ 11 |
11
/ 16 |
62
/ 53 |
53
/ 60 |
3.23
to 6.02 |
6.03
to 12.00 |
21.7 |
7.1x2 |
113 |
1.5 |
|
*Minimum
flange width for curved beam: 1 Ton Push and 1/8 to 1Ton Geared = 2.87 in |
|
CORD
MODEL WITH PUSH TROLLEYSPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Cord
L
(ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add. 1'
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
1/4 |
TCRP250C |
10 |
7.5 |
68
/ 44 |
52
/ 51 |
63
/ 49 |
48
/ 57 |
2.28
to 4.00 |
4.01
to 8.00
or 8.01 to 12.00 |
13.8 |
6.3x1 |
74 |
0.6 |
1/2 |
TCRP500C |
68
/ 44 |
37
/ 57 |
63
/ 49 |
48
/ 57 |
6.3x1 |
73 |
0.6 |
1 |
TCRP1000C2 |
34
/ 22 |
19
/ 29 |
63
/ 49 |
48
/ 57 |
2.28
to 5.00 |
5.01
to 8.00
or 8.01 to 12.00 |
17.7 |
6.3x2 |
91 |
1.2 |
1 |
TCRP1000C |
37
/ 22 |
21
/ 33 |
62
/ 53 |
53
/ 60 |
7.1x1 |
89 |
0.8 |
2 |
TCRP2000C2 |
18.5
/ 11 |
11
/ 16 |
62
/ 53 |
53
/ 60 |
3.23
to 6.02 |
6.03
to 12.00 |
21.7 |
7.1x2 |
111 |
1.5 |
|
*Minimum
flange width for curved beam: 1 Ton Push and 1/8 to 1Ton Geared = 2.87 in |
|
|
|
PENDANT
AND CORD MODEL WITH PUSH TROLLEYDIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
1/4 |
TCRP250C/P |
18.6 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.5 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
1/2 |
TCRP500C/P |
18.6 |
8.0 |
7.2 |
1.8 |
1.1 |
3.2 |
2.36 |
0.5 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
1 |
TCRP1000C/P2 |
21.3 |
9.8 |
9.3 |
2.2 |
1.1 |
4.2 |
2.80 |
0.9 |
3.7 |
2.2 |
4.4 |
2.0 |
0.98 |
1 |
TCRP1000C/P |
19.2 |
9.8 |
9.3 |
2.2 |
1.1 |
4.2 |
2.80 |
1.0 |
3.7 |
2.2 |
4.4 |
2.0 |
0.98 |
2 |
TCRP2000C/P2 |
21.9 |
11.8 |
11.0 |
2.7 |
1.1 |
5.0 |
3.35 |
1.0 |
4.4 |
2.8 |
5.2 |
2.4 |
1.26 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR TCR AIR HOIST WITH PUSH TROLLEY |
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Extra
Lift (ft) |
Up |
Down |
Cord |
Net
Weight
(lbs) |
Pendant |
Net
Weight
(lbs) |
Load
Chain |
Pull
Cord |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
1/4 |
TCRP250C/P |
52 |
68 |
51 |
44 |
10 |
|
74 |
|
76 |
$19.49 |
|
|
1/2 |
TCRP500C/P |
37 |
68 |
57 |
44 |
10 |
|
73 |
|
76 |
1 |
TCRP1000C/P-2 |
19 |
34 |
29 |
22 |
10 |
|
91 |
|
94 |
|
1 |
TCRP1000C/P |
21 |
37 |
33 |
22 |
10 |
|
89 |
|
91 |
|
2 |
TCRP2000C/P-2 |
11 |
19 |
16 |
11 |
10 |
|
111 |
|
113 |
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook. For lift, cord and pendant length limitations,
consult us. Maximum pendant drop is 40 ft. |
* WACSP - additional assembly charge - $263.10.
applies for any special pendant length shorter or longer than our standard
drop. |
C
= cord control P = pendant control |
|
MANUAL
TROLLEY SHAFT EXTENDERS |
|
Cap.
(Tons) |
Std.
Flange Width (in.) |
Flange
Width w/Est. Shaft (in.) |
Price |
1/4
- 1/2 |
2.28
- 4.00 |
4.01
- 8.00 |
|
|
8.01
- 12.00 |
1 |
2.28
- 5.00 |
5.01
- 8.00 |
|
8.01
- 12.00 |
|
2 |
3.23
- 6.02 |
6.03
- 12.00 |
|
|
|
|
TCR
AIR POWERED HOISTS WITH GEARED TROLLEYS |
TCR
hoists will couple with our push trolleys for added mobility. The economical
GT manual trolleys
are perfect for lighter, infrequent moves and in small workshops. |
|
|
|
|
|
Features
and Benefits |
|
|
|
Manual Trolleys |
|
Shafts
Standard shafts fit wide range of beams
Longer shafts available for larger beams
Spacers for easy adjustments
Wheels
All steel
Sealed ball bearings
Fit flat or tapered beam flange |
|
|
|
Standard
Hoist Specifications |
|
Capacity
Range
1/4 2 Ton
Control Option on Hoist
TCRP and TCRG Pendant and cord
Standard Hand Chain Length
On geared trolleys Hangs approximately
2' less than fully extended bottom hook
(longer lengths available) |
|
|
TCR
Air Powered Hoists with Geared Trolley - Specs & Dimensions |
|
PENDANT
MODEL WITH GEARED TROLLEYSPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Push
Button
Hose
L (ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add. 1'
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
1/4 |
TCRG250P |
10 |
7.5 |
68
/ 44 |
52
/ 51 |
63
/ 49 |
48
/ 57 |
2.28
to 5.00 |
5.01
to 8.00
or 8.01 to 12.00 |
51.2 |
6.3x1 |
96 |
1.2 |
1/2 |
TCRG500P |
68
/ 44 |
37
/ 57 |
63
/ 49 |
48
/ 57 |
6.3x1 |
96 |
1.2 |
1 |
TCRG1000P2 |
34
/ 22 |
19
/ 29 |
63
/ 49 |
48
/ 57 |
2.28
to 5.00 |
5.01
to 8.00
or 8.01 to 12.00 |
51.2 |
6.3x2 |
108 |
1.2 |
1 |
TCRG1000P |
37
/ 22 |
21
/ 33 |
62
/ 53 |
53
/ 60 |
7.1x1 |
105 |
1.8 |
2 |
TCRG2000P2 |
18.5
/ 11 |
11
/ 16 |
62
/ 53 |
53
/ 60 |
3.23
to 6.02 |
6.03
to 12.00 |
59.1 |
7.1x2 |
130 |
2.1 |
|
*Minimum
flange width for curved beam: 1 Ton Push and 1/8 to 1Ton Geared = 2.87 in |
|
CORD
MODEL WITH GEARED TROLLEYSPECIFICATIONS |
Cap.
(Tons) |
Product
Code |
Std.
Lift
(ft.) |
Cord
L
(ft) |
Up/Down
Speeds
(ft/min @90 psi) |
Up/Down
Air Consuption
Rates (cfm @90 psi) |
Flange
Width
Adjustability
B (in) |
Min.*
Allow.
Radius for
Curve
(in) |
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets |
Net
Wgt.
(lbs) |
Wgt.
For
Add. 1'
of Lift
(lbs) |
No
Load |
Full
Load |
No
Load |
Full
Load |
Std. |
Optional |
1/4 |
TCRG250C |
10 |
7.5 |
68
/ 44 |
52
/ 51 |
63
/ 49 |
48
/ 57 |
2.28
to 5.00 |
5.01
to 8.00
or 8.01 to 12.00 |
51.2 |
6.3x1 |
94 |
1.2 |
1/2 |
TCRG500C |
68
/ 44 |
37
/ 57 |
63
/ 49 |
48
/ 57 |
6.3x1 |
94 |
1.2 |
1 |
TCRG1000C2 |
34
/ 22 |
19
/ 29 |
63
/ 49 |
48
/ 57 |
2.28
to 5.00 |
5.01
to 8.00
or 8.01 to 12.00 |
51.2 |
6.3x2 |
106 |
1.2 |
1 |
TCRG1000C |
37
/ 22 |
21
/ 33 |
62
/ 53 |
53
/ 60 |
7.1x1 |
103 |
1.8 |
2 |
TCRG2000C2 |
18.5
/ 11 |
11
/ 16 |
62
/ 53 |
53
/ 60 |
3.23
to 6.02 |
6.03
to 12.00 |
59.1 |
7.1x2 |
128 |
2.1 |
|
*Minimum
flange width for curved beam: 1 Ton Push and 1/8 to 1Ton Geared = 2.87 in |
|
|
|
PENDANT
AND CORD MODEL WITH GEARED TROLLEYDIMENSIONS |
Cap.
(Tons) |
Product
Code |
Headroom
C (in) |
E
(ft) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
k'
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
u
(in) |
1/4 |
TCRG250C/P |
19.0 |
10.5 |
20.9 |
9.3 |
13.3 |
1.1 |
4.2 |
2.80 |
1.0 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
1/2 |
TCRG500C/P |
19.0 |
10.5 |
20.9 |
9.3 |
13.3 |
1.1 |
4.2 |
2.80 |
1.0 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
1 |
TCRG1000C/P2 |
21.3 |
10.5 |
20.9 |
9.3 |
13.3 |
1.1 |
4.2 |
2.80 |
0.9 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
1 |
TCRG1000C/P |
19.2 |
10.5 |
20.9 |
9.3 |
13.3 |
1.1 |
4.2 |
2.80 |
1.0 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
2 |
TCRG2000C/P2 |
21.9 |
10.5 |
24.8 |
11.0 |
13.3 |
1.1 |
5.0 |
3.35 |
1.0 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR TCR AIR HOIST WITH GEARED TROLLEY |
Cap.
(Tons) |
Product
Code |
Maximum
Speed (FPM) |
Std.
Lift
Ft. |
Price |
Extra
Lift (ft) |
Up |
Down |
Cord |
Net
Weight
(lbs) |
Pendant |
Net
Weight
(lbs) |
Load
Chain |
Add.
Trolley Hand
Chain |
Pull
Cord |
Pendant
Hose* |
With
Load |
W/O
Load |
With
Load |
W/O
Load |
1/4 |
TCRG250C/P |
52 |
68 |
51 |
44 |
10 |
|
94 |
|
96 |
$19.49 |
|
|
|
1/2 |
TCRG500C/P |
37 |
68 |
57 |
44 |
10 |
|
94 |
|
96 |
1 |
TCRG1000C/P-2 |
19 |
34 |
29 |
22 |
10 |
|
106 |
|
108 |
|
1 |
TCRG1000C/P |
21 |
37 |
33 |
22 |
10 |
|
103 |
|
105 |
|
2 |
TCRG2000C/P-2 |
11 |
19 |
16 |
11 |
10 |
|
128 |
|
130 |
|
|
Std.
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook. For lift, cord and pendant length limitations,
consult us. Maximum pendant drop is 40 ft. |
* WACSP - additional assembly charge - $263.10.
applies for any special pendant length shorter or longer than our standard
drop. |
C
= cord control P = pendant control |
|
MANUAL
TROLLEY SHAFT EXTENDERS |
|
Cap.
(Tons) |
Std.
Flange Width (in.) |
Flange
Width w/Est. Shaft (in.) |
Price |
1 |
2.28
- 5.00 |
5.01
- 8.00 |
|
8.01
- 12.00 |
|
2 |
3.23
- 6.02 |
6.03
- 12.00 |
|
|
|
*Geared
trolleys 1 Ton and under use 1 Ton shaft extender. |
|
|
High Performance Air Hoist,
TCR, Air Operated Hoists, Air Hoist, Air Powered Hoist, Chain Hoists,
Air Chain Hoists, Trolleys,
Hoists, Harrington, and Shop Air Chain Hoists from your source for material
handling equipment. |
Back
to Product Category |
|
|