FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

CLASSIC HEAVY DUTY POLYSTEEL
TABLE AND CHAIR

PATIO FURNITURE
Perfect for the patio or sitting poolside, Polysteel patio sets are a compliment to any setting. Comfortably contoured
and surprisingly strong, the chairs feature adjustable feet and the table boasts a 30 inch diameter table top with a 1.7
inch hole to fit a 1.5 inch diameter pole.
Wind, sand, rain salt and snow are no match for polysteel. The natural weight of our porducts allows them to with
stand any environmental factor. Patio sets are available in expanded metal, laser-cut steel adn welded rod. The patio
table footprint is 30 inches and weights approximately 115 pounds. Each patio chair is 23" x 25" and weights
approximately 55 pounds.
   
  Champion picnic tables are available in twelve standard colors (custom colors
are available) and feature an umbrella hole in most models. Choose from a
variety of styles and mounts to fit your location.
 
See below page for Patio Table and Chairs Specification

POLYSTEEL DECK TABLE & CHAIR
welded rod deck chair
• Completely Plastisol Coated
• Rounded corners for style and ease of entry
• Umbrella hole standard in most models
• Tamper-resistant, stainless steel hardware

Bar Height Table and Chairs

LASER CUT TABLE & CHAIRS

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING
Model Description Weight Price
Expanded
Deck Chair, Expanded, Free Standing
25
$369
Patio Table, Expanded, Free Standing
55
$462
Bar-Height Patio Chair, Free Standing
40
$462
Bar-Height Patio Table, Free Standing
70
$552
Welded Rod
Deck Chair, Welded Rod, Free Standing
25
$390
Bar-Height Patio Chair, Free Standing
40
$488
Laser
Deck Chair, Laser, Free Standing
25
$488
Patio Table, Laser Cut, Free Standing
55
$585
Bar-Height Patio Chair, Free Standing
40
$585
Bar-Height Patio Table, Free Standing
70
$683
Polysteel Specifications for Patio Tables and Chairs (standard height and bar height).
Plastisol specifications included.

Specifications for Patio Table
Expanded Metal Top: HR steel ¾” #9 standard expanded metal.
Laser Cut Steel Top: 14 gauge HR steel
Attached perimeter frame and supporting structure is made from HR steel. A 2” schedule 40 pipe is welded in
the center of top. When coated will accept a 1.625” diameter umbrella pole.
Legs: 1-1/4” pipe size tube

Specifications for Patio Chair

Expanded Seat: HR steel 3/4” #9 standard expanded metal.
Welded Rod Seat: .192 welded rod.
Laser Seat: 12 gauge HR steel.
Side frame: 1/4” HR plate, width frame of 3/16” x 1” HR steel.
Legs: 3/4” pipe size tube
Pipe has no holes to allow access by bees or other insects.

Specifications for Plastisol (PVC) Poly-Vinyl Chloride Coating
      Material: Plastisol (PVC) shall have:
            Antimicrobial (non-leaching) to help prevent microbiological attack on the plastisol (PVC) surface that
                  can cause the loss of aesthetic appearance, mildew odors, embrittlement and premature product failure.
                  Testing Data available Per ASTM G21-90.
            Tensile strength of no less than 1800 psi per ASTM D412.
            Elongation of no less than 200% per ASTM D412
            Tear strength of no less than 300lb/in per ASTM D624.
            Hardness of 90 ± 5 (Durometer, Shore A (Instant)) per ASTM D2240.
            Flammability – Pass per FMVSS 302
            UV stabilized – guaranteed to not show significant fading for 5 years per written warranty
      Process: Prior to plastisol coating, each part shall be chemically washed, dried, heated and coated in a heat
            activated primer and dried. After drying, each part shall be pre-heated in a convection oven to a temperature
            of no less than 400° F, dipped into liquid Plastisol (PVC) and cured in a convection oven at a
            temperature no less than 350° F. All parts shall have a coating thickness of .125”-.25”.

Polysteel products are completely plastisol coated (frames and legs included) with a thick, UV stabilized,
mold and mildew resistant plastisol coating which is compliant with worldwide standards. Polysteel is
committed to being an environmentally conscious company and recognizes the importance of being committed
to continually finding ways to support our environment.


Champion Polysteel Tables, Plastisol Coated, 1.9" OD Tubing, Coating of UV and Fungicide Protected Plastisol,
Walk-Through Design for Comfortable Seating, Wide Base, Classic, Champion, and Northwoods from your source
for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart