FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

T-1D SERIES - 1400

For door openings up to 8' wide x up to 12' high with level driveways

Foam Drape Seals

Construction Drape Curtain
Bondor foam dock seals are constructed
of the finest materials and assembled to
give you years of dependable service.
Our weighted curtain is made the width of
the seal opening, and it covers the face of
the sidepads.
Mounting Board Polyfoam Core
Our foam core is bonded to a kiln-dried
pressure treated 2" thick wood back-
board for an easy, long-lasting
installation.
Insulating polyurethane foam conforms
to the shape of the truck to form a tight
weatherseal.
Permanent Guide Stripe Galvanized Hardware
A 4" wide contrasting guide stripe is
sewn on.
All Bondor Foam Seals are provided
with appropriate galvanized mounting
brackets. Building fasteners not included.
Rugged Vinyl Cover Color
Top quality abrasion resistant 22 oz.
vinyl coated polyester fabric is used
to cover our standard seals. A 40 oz.
polyester reinforced vinyl material is
used on our heavy duty seals.

Standard colors are black with a yellow
guide stripe. Other colors available upon
request.

Vents
All vertical pads are provided with covered vents to allow air to escape during
compression of the seal, reducing the amount of stress on the vinyl fabric.
Grommets in bottom panels allow drainage of moisture.
Full Width Header
Header to consist of full width, weighted drape curtain with mounting backboard.
Curtain to be supported between side pads by galvanized pipe sewn into curtain.
3" wide x 9' - 4" long x 3/4" plywood backboard
Top View
Square side pad cross section shown above -
recommended design for door widths 7' 4" or less.
Top View
Beveled* side pad cross section shown above -
recommended design for 8" wide doors.
Truck Bumpers Required
Front View
Side View
*Beveled side pads allow seal to be mounted with backboard flush with door opening. Eliminates forklift damage to backboard.

To order a series T-1D Drape Seal:

1.

Select a dock seal projection by adding 4" to 6" to your combined existing setback and dock bumper projection.
(See sketch). If there is no existing bumper or setback dimension, select the 10" projection.

2. Select square or beveled sidepads. (Beveled pads are recommended for door openings wider than 7' 4".)
3. Select the desired model # from the price chart such as T-1D/P10/B12-8/STD and add the actual dock door opening
size to complete the model #. Example: T-1D/P10/B12-8/STD/8'W x 10'H. This model would specify a T-1D Drape
Dock Seal with a 10" projection with beveled side pads 12" wide at face and 8" wide at back with standard vertical
side pads for a door opening of 8' W x 10' H.
4. Add desired special options from below - wear pleats, curtain and wide face header pads.
5. Remember to order 2 dock bumpers per seal from our bumpers section if they are not existing.
6.
We invite you to let our engineers review your dock seal application. Complete the truck dock dimension sheet on
our contact page and we will confirm your dock seal selection.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Model No. of the item you wish to purchase.


Table A: T-1D Series Pricing - Use tables B & C (shown below) for optional wear pleats
Dock Seal
Projection
From
Building
Side
Pad
Cross
section
Door
Opening
Height
Range
up to and
Including
(Feet)
Side
Pad
Height
(Feet)
Drape
Curtain
Drop from
Top of
Side Pad
(Inches)
Recommended Dock
Bumper Projection
(order seperately)
from Our Dock Bumper
Catalog Pages
Standard Duty T-1D Dock
Seal - add door width x
door height to base model
# below
Std
T-1D
Dock
Seal
Price
*10" Beveled 10 10 24 4 1/2"- #B4510-14
$1,004
10" Beveled 11 11 36 4 1/2"- #B4510-14
$1,094
10" Beveled 12 12 48 4 1/2"- #B4510-14
$1,188
10" Square 10 10 24 4 1/2"- #B4510-14
$1,004
10" Square 11 11 36 4 1/2"- #B4510-14
$1,094
10" Square 12 12 48 4 1/2"- #B4510-14
$1,188
*12" Beveled 10 10 24 6"- #B610-14
$1,055
12" Beveled 11 11 36 6"- #B610-14
$1,145
12" Beveled 12 12 48 6"- #B610-14
$1,238
12" Square 10 10 24 6"- #B610-14
$1,055
12" Square 11 11 36 6"- #B610-14
$1,145
12" Square 12 12 48 6"- #B610-14
$1,238
Projection Cross section Door Opening Pad Height Drape Drop Recommended Dock Bumper
Model #
 Price
14" Beveled 10 10 24 9" - #B910-14
$1,163
14" Beveled 11 11 36 9" - #B910-14
$1,255
14" Beveled 12 12 48 9" - #B910-14
$1,346
14" Square 10 10 24 9" - #B910-14
$1,163
14" Square 11 11 36 9" - #B910-14
$1,255
14" Square 12 12 48 9" - #B910-14
$1,346
16" Beveled 10 10 24 10 1/2" - #B10510-14
$1,273
16" Beveled 11 11 36 10 1/2" - #B10510-14
$1,363
16" Beveled 12 12 48 10 1/2" - #B10510-14
$1,456
16" Square 10 10 24 10 1/2" - #B10510-14
$1,273
16" Square 11 11 36 10 1/2" - #B10510-14
$1,363
16" Square 12 12 48 10 1/2" - #B10510-14
$1,456
Projection Cross section Door Opening Pad Height Drape Drop Recommended Dock Bumper Model #
  Price
18" Beveled 10 10 24 12" - #B1210-14
$1,381
18" Beveled 11 11 36 12" - #B1210-14
$1,472
18" Beveled 12 12 48 12" - #B1210-14
$1,566
18" Square 10 10 24 12" - #B1210-14
$1,381
18" Square 11 11 36 12" - #B1210-14
$1,472
18" Square 12 12 48 12" - #B1210-14
$1,566
20" Beveled 10 10 24 14" - contact us
$1,490
20" Beveled 11 11 36 14" - contact us
$1,584
20" Beveled 12 12 48 14" - contact us
$1,674
20" Square 10 10 24 14" - contact us
$1,490
20" Square 11 11 36 14" - contact us
$1,584
20" Square 12 12 48 14" - contact us
$1,674
Projection Cross section Door Opening Pad Height Drape Drop Recommended Dock Bumper
Model #
 Price 
22" Beveled 10 10 24 16" - contact us
$1,600
22" Beveled 11 11 36 16" - contact us
$1,692
22" Beveled 12 12 48 16" - contact us
$1,784
22" Square 10 10 24 16" - contact us
$1,600
22" Square 11 11 36 16" - contact us
$1,692
22" Square 12 12 48 16" - contact us
$1,784
Optional Wear Pleats/Surfaces (use charts below)
40 oz. wear pleat surfaces for the full length of the side pads provide maximum wear and abrasion resistance. Available in 4" or 8" exposure.
NOTE:  Each seal ordered with wear pleats includes pleats on drape
curtain.
8" pleat exposure shown
8" pleat exposure
shown here
4" pleat exposure
shown here


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Model No. of the item you wish to purchase.


Table B: T-1D Series Pricing with Optional Wear Pleat Surface - 8" exposure
Dock
Seal
Projection
From
Building
Side
Pad
Cross
section

Door
Opening
Height
Range
up to and
Including
(Feet)

Side
Pad
Height
(Feet)
Drape
Curtain
Drop from
Top of
Side Pad
(Inches)

Recommended Dock
Bumper Projection
(order seperately)
from Our Dock Bumper
Catalog Pages

Standard Duty T-1D Dock
Seal with Optional Wear
Pleat Surface - 8" Exposure -
add door width x door height
to model # below
Price
with 8"
Exposure
Pleat
10" Beveled 10 10 24 4 1/2"- #B4510-14
$1,359
10" Beveled 11 11 36 4 1/2"- #B4510-14
$1,489
10" Beveled 12 12 48 4 1/2"- #B4510-14
$1,616
10" Square 10 10 24 4 1/2"- #B4510-14
$1,359
10" Square 11 11 36 4 1/2"- #B4510-14
$1,489
10" Square 12 12 48 4 1/2"- #B4510-14
$1,616
12" Beveled 10 10 24 6"- #B610-14
$1,408
12" Beveled 11 11 36 6"- #B610-14
$1,537
12" Beveled 12 12 48 6"- #B610-14
$1,665
12" Square 10 10 24 6"- #B610-14
$1,408
12" Square 11 11 36 6"- #B610-14
$1,537
12" Square 12 12 48 6"- #B610-14
$1,665
Projection Cross section Door Opening Pad Height Drape Drop Recommended Dock Bumper
Model #
 Price
14" Beveled 10 10 24 9" - #B910-14
$1,519
14" Beveled 11 11 36 9" - #B910-14
$1,645
14" Beveled 12 12 48 9" - #B910-14
$1,773
14" Square 10 10 24 9" - #B910-14
$1,519
14" Square 11 11 36 9" - #B910-14
$1,645
14" Square 12 12 48 9" - #B910-14
$1,773
16" Beveled 10 10 24 10 1/2" - #B10510-14
$1,627
16" Beveled 11 11 36 10 1/2" - #B10510-14
$1,757
16" Beveled 12 12 48 10 1/2" - #B10510-14
$1,883
16" Square 10 10 24 10 1/2" - #B10510-14
$1,627
16" Square 11 11 36 10 1/2" - #B10510-14
$1,757
16" Square 12 12 48 10 1/2" - #B10510-14
$1,883
Projection Cross section Door Opening Pad Height Drape Drop Recommended Dock Bumper
Model #
 Price
18" Beveled 10 10 24 12" - #B1210-14
$1,737
18" Beveled 11 11 36 12" - #B1210-14
$1,867
18" Beveled 12 12 48 12" - #B1210-14
$1,991
18" Square 10 10 24 12" - #B1210-14
$1,737
18" Square 11 11 36 12" - #B1210-14
$1,867
18" Square 12 12 48 12" - #B1210-14
$1,991
20" Beveled 10 10 24 14" - contact us
$1,845
20" Beveled 11 11 36 14" - contact us
$1,975
20" Beveled 12 12 48 14" - contact us
$2,102
20" Square 10 10 24 14" - contact us
$1,845
20" Square 11 11 36 14" - contact us
$1,975
20" Square 12 12 48 14" - contact us
$2,102
Projection Cross section Door Opening Pad Height Drape Drop Recommended Dock Bumper
Model #
 Price
22" Beveled 10 10 24 16" - contact us
$1,955
22" Beveled 11 11 36 16" - contact us
$2,084
22" Beveled 12 12 48 16" - contact us
$2,212
22" Square 10 10 24 16" - contact us
$1,955
22" Square 11 11 36 16" - contact us
$2,084
22" Square 12 12 48 16" - contact us
$2,212

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Model No. of the item you wish to purchase.


Table C: T-1D Series Pricing with Optional Wear Pleat Surface - 4" exposure
Dock
Seal
Projection
From
Building
Side
Pad
Cross
section
Door
Opening
Height
Range
up to and
Including
(Feet)
Side
Pad
Height
(Feet)
Drape
Curtain
Drop from
Top of
Side Pad
(Inches)
Recommended Dock
Bumper Projection
(order seperately)
from Our Dock
Bumper Catalog Pages
Standard Duty T-1D Dock
Seal with Optional Wear
Pleat Surface - 4" Exposure -
add door width x door height
to model # below
Price
with 4"
Exposure
Pleat
10" Beveled 10 10 24 4 1/2"- #B4510-14
$1,552
10" Beveled 11 11 36 4 1/2"- #B4510-14
$1,696
10" Beveled 12 12 48 4 1/2"- #B4510-14
$1,843
10" Square 10 10 24 4 1/2"- #B4510-14
$1,552
10" Square 11 11 36 4 1/2"- #B4510-14
$1,696
10" Square 12 12 48 4 1/2"- #B4510-14
$1,843
12" Beveled 10 10 24 6"- #B610-14
$1,600
12" Beveled 11 11 36 6"- #B610-14
$1,746
12" Beveled 12 12 48 6"- #B610-14
$1,892
12" Square 10 10 24 6"- #B610-14
$1,600
12" Square 11 11 36 6"- #B610-14
$1,746
12" Square 12 12 48 6"- #B610-14
$1,892
Projection
Cross section
Door Opening
Pad Height
Drape Drop
Recommended Dock Bumper
Model #
Price
14" Beveled 10 10 24 9" - #B910-14
$1,708
14" Beveled 11 11 36 9" - #B910-14
$1,856
14" Beveled 12 12 48 9" - #B910-14
$2,002
14" Square 10 10 24 9" - #B910-14
$1,708
14" Square 11 11 36 9" - #B910-14
$1,856
14" Square 12 12 48 9" - #B910-14
$2,002
16" Beveled 10 10 24 10 1/2" - #B10510-14
$1,818
16" Beveled 11 11 36 10 1/2" - #B10510-14
$1,966
16" Beveled 12 12 48 10 1/2" - #B10510-14
$2,113
16" Square 10 10 24 10 1/2" - #B10510-14
$1,818
16" Square 11 11 36 10 1/2" - #B10510-14
$1,966
16" Square 12 12 48 10 1/2" - #B10510-14
$2,113
Projection
Cross section
Door Opening
Pad Height
Drape Drop
Recommended Dock Bumper
Model #
Price
18" Beveled 10 10 24 12" - #B1210-14
$1,926
18" Beveled 11 11 36 12" - #B1210-14
$2,074
18" Beveled 12 12 48 12" - #B1210-14
$2,221
18" Square 10 10 24 12" - #B1210-14
$1,926
18" Square 11 11 36 12" - #B1210-14
$2,074
18" Square 12 12 48 12" - #B1210-14
$2,221
20" Beveled 10 10 24 14" - contact us
$2,038
20" Beveled 11 11 36 14" - contact us
$2,183
20" Beveled 12 12 48 14" - contact us
$2,331
20" Square 10 10 24 14" - contact us
$2,038
20" Square 11 11 36 14" - contact us
$2,183
20" Square 12 12 48 14" - contact us
$2,331
Projection Cross section Door Opening Pad Height Drape Drop Recommended Dock Bumper
Model #
Price
22" Beveled 10 10 24 16" - contact us
$2,147
22" Beveled 11 11 36 16" - contact us
$2,291
22" Beveled 12 12 48 16" - contact us
$2,439
22" Square 10 10 24 16" - contact us
$2,147
22" Square 11 11 36 16" - contact us
$2,291
22" Square 12 12 48 16" - contact us
$2,439

ARCHITECTURAL SPECIFICATIONS - Model T-1D Drape Foam Seal
Truck Dock Seals
Truck dock seals shall be Drape Type as manufactured by the Bondor Division of FS Industries, W. Greenwich, RI,
to fit a door opening of 8' wide x 12' high.
Construction

Pads to have a polyurethane foam core bonded to a 2" x 12" kiln dried pressure treated wood backboard to give
a finished projection of ______________. Side pads to be 10' - 0" long (standard). Side pads to have 4" wide
contrasting guide stripe sewn on. Bottom of pads to have 3" upward taper to prevent pinching between truck and
bumpers. Bottom of pads to be closed with covered side vents to allow for air during compression and to prevent
condensation. Header to consist of full width, weighted drape curtain with mounting strip. Curtain to be supported
between side pads by galvanized pipe sewn into curtain. Curtain to be provided with end cap panels and elastic
shock cords to hold curtain in place.

Cover Material
Pads to be wrapped with 22 oz. vinyl coated polyester.
Bondor, Dock Door Loading Seal, Dock Door Seals, Foam Drape Seals, Foam Truck Dock Seals, Dock Seals, Loading Dock Door
Seals, Loading Dock Seals, and Wear Plates from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart