FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

THE STANDARD HYDRAULIC WINCH-HOIST

1,500 lb Single-Line or 3,000 lb Double-Line Lift

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


hydraulic winch hoist
FEATURES
• Worm gear reduction for positive load holding
• Rugged construction
• Hydraulic power
• High capacity cable drum
• Frictionless bearings
• Full power reversible
• Cable tensioner for better cable tracking
APPLICATIONS

• All Purpose Lifting and Pulling.
• Pulls Loads of Up to 10,000 lbs.
• Where Hydraulic Power Source Is Available.
• On Service and Hauling Trucks.

Model No.
Prices
$2,576
SPECIFICATIONS
Construction Features:
• Heavy-duty angle base drilled for six (6) 1/2" bolts
   (9/16" mounting holes) with no welding required
• Fully sealed aluminum housings, with precision-cut
   gears, run in an oil bath
• Stress-proof drum shaft
• Frictionless bearings
Drum Cycle:
• 25% - 15 min/hr when operating at full load
Drum Storage:
• 1/8" - 1,000 ft   • 1/4" - 250 ft
• 3/16" - 450 ft    • 5/16" - 150 ft
Lifting Capacity:
• 10% (6°): 10,000 lbs   • 60% (31°): 1,900 lbs
• 20% (11°): 5,000 lbs   • 80% (39°): 1,600 lbs
• 40% (22°): 2,600 lbs   • 100% (45°): 1,400 lbs
Gear System:
• 30:1
• Hardened steel worm and forged bronze worm gear
   holds load in position when stopped
Note: Our winch-hoist are rated for what they will vertically lift.
Above data is based on the total load that may be pulled, single
line, up a given incline. All capacities are reduced 20% to allow
for minimum friction in pull.
Power:
• High-torque rotary hydraulic motor
• 1/2" - 14 NPTF hydraulic connections
Cable Strength:
• 5 to 1 recommended safety factor
• Top-quality galvanized cable available in the following breaking strengths:
• 1/8" - 2,000 lbs     • 1/4" - 7,000 lbs
• 3/16" - 4,200 lbs   • 5/16" - 9,800 lbs
Pump Requirements:
• 2 GPM @ 900 psi minimum pump capacity
• 12 GPM @ 1,500 psi recommended pump capacity
• 2,250 maximum psi
Speeds:
Typical System Operation (12 GPM @ 1,500 psi):
• 17 FPM: No-load drum speed
• 14 FPM: 1,000 lbs - single-line lift
• 10 FPM: 1,500 lbs - double-line lift
Minimum System Operation (2 GPM @900 psi):
• 5 1/2 FPM: No-load drum speed
• 4 1/2 FPM: 1,500 lbs - single-line lift
• 4 FPM: 1,500 lbs. - double-line lift
Note: For best results, use the minimum amount of cable required
for application plus four safety turns around the drum. Cable sold
separately. Length and size must be specified at time of order.
Dimensions: (WxHxL)
9" x 9" x 21"
Shipping Weight: 60 lbs
Factory-Installed Options:
• Clutch
• Alternate Drums
• Hydraulic Rope Winch-Hoist
Note: All speeds are based on one layer of cable on drum.
FRONT VIEW
SIDE VIEW
hydraulic winch hoist hydraulic winch hoist
TOP VIEW
hydraulic winch hoist

Hydraulic Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch, Power
Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling
equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart