FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

SINGLE TIER LOCKERS
single tier lockers THE MOST PREFERRED OF ALL LOCKERS!
Provides a convenient shelf as well as full length clothing storage.
Technical Data
Shelf is 9" from top for storage of hats, lunches, etc.
12"d and 15"d lockers have a double-prong (ceiling) hook—as well as three
    single-prong hooks.
Coat rods are standard equipment in place of the ceiling double prong hook
   on lockers 18" and 21" deep.
Padlock attachment is an integral part of the handle. Padlock is not included.
May be equipped with built-in locks or padlocks.
Number plates are available as accessories see below.
Shipped K.D. (Knocked down).
ADA REQUIREMENTS
FOR LOCKERS
1. Doors must be able to be opened without a twisting
    or clasping motion. The standard test for compliance
    is if the door can be opened with closed fingers.
A recessed handle with a lockbar or single point is
compliant.
2. The locker bottom must be a minimum of 15" from the
    finished floor. This is accomplished by locating a shelf
    12" from the bottom of the locker. Additional shelves
    can be purchased separately, contact Our Customer
    Service Dept. The shelf is acceptable as the locker
    bottom and when the locker is placed on a minimum
    3" base the shelf/bottom is a minimum of 15" from the
    finished floor.
No. 5112-3 - One single tier
locker section, three frames wide
(three locker openings).
3. The locker shelf or hooks can not exceed 48" from the
     finished floor. The shelf and hooks can be relocated
     during set-up.
Contact Our Customer Service Department for more ADA product
specs, and project support on choosing the best locker
solution for your project.
Alternate color selections only include the door
and frame assembly. Interior components including;
tops, bottoms, sides, backs, and shelves will be
painted putty.
Dove Gray and Putty Lockers from stock will include
matching interior components.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
Locker Arrangement Information
PRICING FOR SINGLE TIER LOCKERS
When ordering specify the total number of
locker openings required.
Size Frames Openings Model Price
Per Locker Opening
12"w x 12"d x 60"h* 1 1 5002
$237.90
12"w x 12"d x 60"h* 3 3 5002-3
$620.50
         
12"w x 15"d x 60"h* 1 1 5012
$248.00
12"w x 15"d x 60"h* 3 3 5012-3
$646.75
         
12"w x 18"d x 60"h* 1 1 5022
$260.70
12"w x 18"d x 60"h* 3 3 5022-3
$679.80
         
12"w x 12"d x 72"h* 1 1 5112
$248.00
12"w x 12"d x 72"h* 3 3 5112-3
$646.75
         
12"w x 15"d x 72"h* 1 1 5032
$272.40
12"w x 15"d x 72"h* 3 3 5032-3
$710.50
         
12"w x 18"d x 72"h* 1 1 5042
$283.05
12"w x 18"d x 72"h* 3 3 5042-3
$738.00
         
15"w x 18"d x 72"h* 1 1 5062
$316.35
15"w x 18"d x 72"h* 3 3 5062-3
$825.05
         
18"w x 18"d x 72"h* 1 1 5092
$329.00
18"w x 18"d x 72"h* 3 3 5092-3
$858.15
         
18"w x 21"d x 72"h* 1 1 5102
$344.50
18"w x 21"d x 72"h* 3 3 5102-3
$898.65
lyon one section single tier lockers lyon three section single tier lockers
Order one No. 5002
and receive This one
section, one frame
wide (one locker
opening).
Order one No. 5002-3 and
receive This one section three
frames wide (three locker
openings).
*Heights shown do not include legs-add 6" to height for legs.
LOCKER ACCESSORIES
FLOOR ANCHORING SYSTEMS
floor anchoring angle anchoring
NOTE: For conditions
other than outlined
below, please contact us.
Anchoring Angle For Lockers Without Legs
Locker Anchoring Angles (running from front to rear
on the inside bottom of the locker) provide a bearing
surface for the fasteners which are connected to the
floor or locker base. For the typical continuous-row
locker installation, order one locker anchoring angle
for each end of a row, plus sufficient quantity to provide
angles on 36" centers. On single-row installations where
backs are against a wall, lockers should be suitably wall
anchored as detailed in assembly instructions packed
with lockers.
When backs are exposed (free-standing) a locker foot
is recommended for all locker legs. When backs are
against a wall and suitably wall anchored, locker feet
are recommended on front legs only. For more details,
see assembly instructions packed with lockers.
NUMBER PLATES
Number Plates
• Etched black figures on aluminum plate
• Numbers stocked from 1 to 999
Size: 2 3/4"w x 1"h
master keyed combination padlock
FLAT-KEY LOCKS
Master-Keyed
Combination
Padlock
Built-in
Master-Keyed
Combination
Same lock fits all Lockers except
Personal Effects & ExchangeMaster®.
Easy to install and furnished with two keys.
Pricing upon request Pricing upon request
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
LOCKER ACCESSORIES PRICES
Model
No.
Description
Dimensions
Qty per Pkg
Pkg Wt
Price Per
Pkg.
Number Plate
2 3/4"w x 1"h
1
1
$1.40
Locker foot (galvanized)
~
10
1.1
$19.15
Anchoring Angle for 12"D lockers (galvanized)
12"D
10
4
$109.35
Anchoring Angle for 15"D lockers (galvanized)
15"D
10
5.2
$113.30
Anchoring Angle for 18"D lockers (galvanized)
18"D
10
6.5
$116.00
Anchoring Angle for 21"D lockers (galvanized)
21"D
10
7.5
$119.25
Flat Key Lock for lockers
~
1
0.2
$9.20
Lyon, Lockers, Personnel Lockers, School Lockers, Single Tier Lockers, ADA Lockers, Double Tier Lockers, Metal Lockers,
Triple Tier Lockers, and Expanded Metal Lockers from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart