FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

SHELVING PARTS AND COMPONENTS

shelving parts and components

8000 Series Industrial Shelving is based on
   the T-Post Upright, with various options for
   shelves. Choose from 18, 20 or 22-gauge
   Box "W" shelves, 18-gauge flanged shelves,
   or specialty shelves such as galvanized,
   open wire and others. A complete break-
  down of the individual components can be
  found below.

Floor and/or wall anchoring is
   recommended for all shelving sections.
See bottom of page for specifications
ORDERING NOTE:
All items must be ordered in package
quantities.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


UPRIGHT POSTS
(A) Open Shelving T-Post Upright Assembly (B) Closed Shelving T-Post Upright Assembly Roll-Formed T-Posts Only
Model
No.
Dimensions
Qty/Pk
Price
12"d x 84"h
1
$78.04
12"d x 84"h
6
$494.22
18"d x 84"h
1
$80.55
18"d x 84"h
6
$561.36
24"d x 84"h
1
$83.25
24"d x 84"h
6
$516.54
12"d x 96"h
1
$126.55
12"d x 96"h
6
$782.34
18"d x 96"h
1
$127.25
18"d x 96"h
6
$791.34
24"d x 96"h
1
$133.03
24"d x 96"h
6
$769.32
12"d x 120"h
1
$165.34
12"d x 120"h
6
$1,020.60
18"d x 120"h
1
$159.60
18"d x 120"h
6
$1,038.60
24"d x 120"h
1
$229.22
24"d x 120"h
6
$994.56
30"d x 84"h
1
$106.96
30"d x 84"h
6
$622.44
Model
No.
Dimensions
Qty/Pk
Price
12"d x 84"h
1
$123.99
12"d x 84"h
6
$643.50
18"d x 84"h
1
$141.79
18"d x 84"h
6
$714.24
24"d x 84"h
1
$165.45
24"d x 84"h
6
$834.30
30"d x 84"h
1
$203.55
30"d x 84"h
6
$1,108.56
12"d x 96"h
1
$189.27
12"d x 96"h
5
$803.60
18"d x 96"h
1
$242.92
18"d x 96"h
5
$896.85
24"d x 96"h
1
$232.66
24"d x 96"h
5
$1,001.95
12"d x 120"h
1
$261.70
12"d x 120"h
4
$879.64
18"d x 120"h
1
$279.10
18"d x 120"h
4
$943.88
24"d x 120"h
1
$301.19
24"d x 120"h
4
$1,072.76
Model No.
Height
Qty/Pk
Price
84"h
2
$67.94
96"h
2
$106.10
120"h
2
$121.52

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


BRACES
BACKS
braces for shelving backs for shelving
(E) Shelving Backs
Model No.
Dimensions
Qty/Pk
Price
30"w x 84"h
5
$905.55
30"w x 84"h
1
$216.42
36"w x 84"h
5
$517.10
36"w x 84"h
1
$114.74
36"w x 96"h
1
$214.34
36"w x 120"h
1
$330.87
42"w x 84"h
1
$216.63
42"w x 96"h
1
$215.01
42"w x 120"h
1
$282.49
42"w x 84"h
5
$672.95
42"w x 84"h
1
$149.38
(C) Open Rack End Cross Braces
Model No.
Use With
Qty/Pk
Price
12" Open Rack Ends
6
$86.58
12" Open Rack Ends
1
$20.45
18" Open Rack Ends
6
$101.94
18" Open Rack Ends
1
$21.15
24" Open Rack Ends
6
$108.96
24" Open Rack Ends
1
$26.93
30" Open Rack Ends
6
$163.74
30" Open Rack Ends
2
$73.85
36" Open Rack Ends
6
$166.56
36" Open Rack Ends
2
$62.58
(D) Lateral (Back) Cross Brace
Model No.
Use With Shelving
Qty/Pk
Price
30"w & 36"w Shelving
(Including Counter)
10
$253.50
1
$55.96
All 42"w Shelving
10
$358.50
1
$57.17
All 48"w Shelving
(Except Counter)
10
$220.70
1
$50.90

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


SHELVES
(F) Medium Duty Shelves 22-Gauge Heavy Duty Shelves 20-Gauge
Model No.
Dimensions
Qty/Pk
Price
36"w x 12"d
1
$53.67
36"w x 12"d
5
$246.55
36"w x 18"d
1
$47.99
36"w x 18"d
5
$226.00
36"w x 24"d
1
$79.78
36"w x 24"d
5
$345.75
(Without Labelholder)
Model No.
Dimensions
Qty/Pk
Price
30"w x 30"d
5
$435.50
36"w x 12"d
1
$62.61
36"w x 12"d
5
$262.40
36"w x 18"d
1
$51.17
36"w x 18"d
5
$318.65
36"w x 24"d
1
$97.30
36"w x 24"d
5
$371.40
42"w x 12"d
1
$84.21
42"w x 12"d
5
$291.10
42"w x 18"d
1
$80.34
42"w x 18"d
5
$375.65
42"w x 24"d
1
$103.14
42"w x 24"d
5
$443.55
48"w x 12"d
1
$73.74
48"w x 12"d
5
$312.40
48"w x 18"d
1
$67.57
48"w x 18"d
5
$405.05
48"w x 24"d
1
$96.15
48"w x 24"d
5
$428.65

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Extra Heavy Duty Shelves 18-Gauge
(Without Labelholder)
Model No.
Dimensions
Qty/Pk
Price
36"w x 12"d
1
$63.97
36"w x 12"d
5
$298.10
36"w x 18"d
1
$78.84
36"w x 18"d
5
$365.10
36"w x 24"d
1
$96.62
36"w x 24"d
5
$430.00
48"w x 12"d
1
$83.07
48"w x 12"d
5
$359.05
48"w x 18"d
1
$98.44
48"w x 18"d
5
$453.55
48"w x 24"d
1
$107.39
48"w x 24"d
5
$525.40

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


SHELF CLIPS
DIVIDERS
dividers
#8854
#65160
(J) Shelf Dividers
(H) Shelf Clips
Model No.
Description
Qty/Pk
Price
12"d x 6"h
12
$168.00
12"d x 9"h
12
$185.13
12"d x 12"h
12
$211.92
12"d x 15"h
12
$257.40
12"d x 18"h
12
$266.88
18"d x 6"h
12
$255.84
18"d x 9"h
12
$215.64
18"d x 12"h
12
$255.60
18"d x 15"h
12
$283.68
18"d x 18"h
12
$341.76
18"d x 16 1/2"h
12
$327.72
24"d x 6"h
12
$258.36
24"d x 9"h
12
$285.84
24"d x 12"h
12
$363.48
24"d x 15"h
12
$400.68
24"d x 18"h
12
$488.88
Model No.
Description
Qty/Pk
Price
Zinc Plated Clip
20
$17.80
Integration Clip
1
$0.48
(K) Label holders
Model No.
Description
Qty/Pk
Price
30" Label Holder
12
$455.00
36" Label Holder
12
$60.00
42" Label Holder
12
$497.25
48" Label Holder
12
$71.25

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Labels (100 Pack) Shim Plates (for uneven Floors)
Model No.
Description
Qty/Pk
Price
32" White Labels
100
$202.00
Model No.
Description
Qty/Pk
Price
Fits all upright assembles
20
$18.20
(P) Swinging Doors for Shelving End Tie Clips
Model No.
Description
Qty/Pk
Price
36"w x 84"h,  Only Available for One Side
1
$574.41
Model No.
Description
Qty/Pk
Price
Ties Sections Back-to-Back
20
$40.00
BOXES
(V) Steel Shelf Boxes
Model No.
Dimensions
Qty/Pk
Price
5 21/32"w x 11 1/4"d x 4 5/16"h
12
$501.24
5 21/32"w x 17 1/4"d x 4 5/16"h
12
$576.24
5 21/32"w x 23 1/4"d x 4 5/16"h
12
$741.48
(V) Shelf Box Dividers
for 8115, 8116, 8117
100
$325.00

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


30" WIDE MODULAR DRAWER COMPONENTS
Extra Shelves for use with Modular Drawers in Shelving
Model No.
Dimensions
Qty/Pk
Price
30" w x 30"d
5
$435.50
Upright Assemblies for use with Modular Drawers in Shelving
Model No.
Description
Qty/Pk
Price
Closed, 30"d x 84"h
1
$203.55
Closed, 30"d x 84"h
6
$1,108.56
Open, 30"d x 84"h
1
$106.96
Open, 30"d x 84"h
6
$622.44
Backs for use with modular Drawers in shelving
Model No. Dimensions Qty/Pk Price
8648 30"d x 84"h 5
$905.55
8648-1 30"d x 84"h 1
$216.42

SHELVING SPECIFICATIONS
"T" Uprights - All posts punched on 1-1/2" centers with pairs of
parallel slots 11/16" long, with one slot keyhole-shaped for bolting
cross braces and accessories to uprights.
Medium Duty (M) Industrial Shelves - 22-gauge with front and
rear "Box W" formation. The front and rear "Box W" formation
is not less than 1-11/64" x 27/32" x 1-1/8" with a 9/16" return
flange spot-welded to bottom surface of the shelf. The 27/32"
portion of the "Box W" formation shall have a 10-degree bend
in the center for additional strength and rigidity. The front and
rear flanges of the shelf shall be punched to accept bin fronts,
label holders and other accessories. Ends are to be flanged not
less than 1-11/64" with a 90-degree return flange of not less than
5/8". All corners lapped and welded. All shelves punched on 3"
centers for divider attachment. The front and rear flanges of the
shelf are to be embossed with "22 GA".
Open Uprights - Consist of two 16-gauge, hot-rolled, formed
steel "T's" 1-1/2" x 2-1/8" x 1/8" with one pair of 1" x 12 - gauge
band cross braces on uprights less than 120" high. Uprights
120" and higher - two or more pairs of 1" x 12-gauge band cross
braces as required.
Closed Uprights - Two 16-gauge, hot-rolled, formed steel "T's"
1-1/2" x 2-1/8" x 1/8" with 24-gauge side sheet spot-welded on
6" centers to the 1/2" extensions of the "T".
Beaded Post Uprights - All posts shall be punched on 1-1/2"
centers with pairs of parallel slots 11/16" long with one slot
keyhole-shaped for bolting cross braces and other accessories
to uprights. Note: Due to loading limitations, beaded post
shelving is designed for single-tier (non-mezzanine) use only.
Traditional Industrial Shelves - 18-gauge with front and rear
flanged down not less than 1-11/64" with return flange of not less
than 3/8" at approximately 10 degrees, and punched to
accommodate label holder and accessories. Ends are to be
flanged not less than 1-11/64" with a 90-degree return flange of
not less than 5/8". All corners lapped and welded. All shelves
punched on 3' centers for divider adjustment. Shelves also
punch at four corners for bolting to uprights. The front and rear
flanges are to be embossed with "18 GA."
Open Uprights shall consist of one front 16-gauge, cold-rolled,
formed steel beaded post 3/4" x 2-21/32" x 1/8" and one rear
16-gauge. hot-rolled, formed steel tee 1-1/2" x 2-1/8" x 1/8" and one
pair of 1" x 12-gauge band cross braces on uprights less than 120"
high. Uprights 120" and higher shall have two or more pairs of
1' x 12-gauge band cross braces as required.

Heavy Duty (H) Industrial Shelves - 20-gauge with front and
rear" Box W" formation. The front and rear "Box W" formation
is not less than 1-11/64" x 27/32" x 1-1/8" with a 9/16" return
flange, spot-welded to the bottom portion of the shelf. The 27/32"
portion of the "Box W" formation shall have a 10-degree bend
in the center for additional strength and rigidity. The front and
rear flanges of the shelf shall be punched to accept bin fronts,
label holders and other accessories. Ends are to be flanged not
less than 1-11/64" with a 90-degree return flange of not less
than 5/8". All corners lapped and welded. All shelves punched
on 3" centers for divider attachment. Shelves also punch at four
corners for bolting to uprights. The front and rear flanges of the
shelf are to be embossed with "20 GA."
Closed uprights shall consist of one front 16-gauge, cold-rolled,
formed steel beaded post 3/4" x 2-21/32 x 1/8" and one rear
16-gauge, hot-rolled, formed steel tee 1-1/2" x 2-1/8" x 1/8" and
shall have a 24-gauge side sheet spot-welded on 6" centers on
the 1/2" extensions of the beaded post and the tee.
Offset Angle Uprights - all uprights shall be punched on 1-1/2"
centers with pairs of parallel slots 13/16" long with one slot to
have an 11/32" diameter hole in center for the attachment of cross
braces, bolting shelving and other accessories. The end of each
slot is embossed to ensure perfect clip fit-up.
Open uprights consist of two 13-gauge, hot-rolled, formed steel
"offset angles" 1" x 2-3/8" with one pair of 1" x 12-gauge band
cross braces on uprights less than 96" high. Uprights 96" and
higher shall have two or more pairs of 1" x 12-gauge band cross
braces as required.
Extra Heavy Duty (X) Industrial Shelves - 18-gauge with front
and rear "Box W" formation. The front and rear "Box W"
formation is not less than 1-11/64" x 27/32" x 1-1/8" with a
9/16" return flange spot-welded to the bottom portion of the
shelf. The 27/32" portion of the "Box W" formation shall have
a 10-degree bend in the center for additional strength and rigidity.
The front and rear flanges of the shelf shall be punched to
accept bin fronts, labels holders and other accessories. Ends are
to be flanged not less than 1-11/64" with a 90-degree return flange
of not less than 5/8". All corners lapped and welded. All shelves
punched on 3" centers for divider attachment. Shelves also punch
at four corners for bolting to uprights. The front and rear flanges
of the shelf are to be embossed with "18 GA."
Closed uprights consist of two 13-gauge, hot-rolled, formed steel
"offset angles" 1" x 2-3/8" with 24-gauge side sheet. Side sheets
are punched with holes for bolting to uprights.
Shelf Clips - 12 gauge, hot-rolled, one-piece construction. Four
shelf clips used with each shelf.
Note: "Box post" uprights require the use of the 65160
integration clip.
Lateral Cross Braces - 1" x 12-gauge band formed and punched
at each end to bolt to upright post. One pair of lateral cross
braces - used with every three shelving sections with shelf
spacing less than 30". Shelving sections with 30" or greater shelf
spacings -two pairs of lateral cross braces with every three
shelving sections.
Label Holders -24-gauge steel, friction type with 7/8" inside
dimension, and attached to shelves with three spring fasteners.
Crosswise Dividers - Front and rear edges - 3/8" O.D. curls. Top
and bottom - flanges not less than 3/4" punched for attaching to
shelves. All crosswise dividers up to 18" high and 18" deep are
heavy gauge steel. Crosswise dividers over 18" high and 21"
deep are heavy gauge steel.
Lateral Cross Braces - 1" x 12-gauge band formed and punched
at each end to bolt to upright post. One pair of lateral cross braces
-used with every three shelving sections with shelf spacing less
than 30". Shelving sections with 30" or greater shelf spacings -
two pairs of lateral cross braces with every three shelving
sections.
Lengthwise Dividers - Range from 22-gauge to 18-gauge steel depending upon shelf spacings.
Bin Fronts - Top and bottom edges - 7/16" OD curls. Each end - 1/4" offset to engage upright "T's." Bin fronts - punched to screw to the front flange of shelves. Label holder hangs on 2" centers - provided on 3" bin fronts. 1" bin fronts - heavy gauge steel 3" bin fronts wider than 42" shall be heavy gauge.
Backs - two half panels of heavy gauge steel providing a total
of three vertical rows of holes on 1-1/2" centers for attachments
to shelves with back to shelf clips optional and with three screws
at the top and bottom shelves, tow at midpoint. One-piece backs
are optional - heavy gauge steel, now wider than 48".
Bases - channel shaped with ends constructed to engage
upright "T's" and lock in place with a spring fastener. 3" high
base - heavy gauge steel and 6" high bases shall be heavy gauge.
Shelf Boxes - heavy gauge steel body with divider slots on
1" centers of box sides. Heavy gauge box fronts have integral
handle and card holder. Heavy gauge box backs have integral
"E" stop. Shelf boxes provided with heavy gauge galvanized
steel dividers with integral card holders.
Sliding Doors - heavy gauge steel with three heavy gauge
horizontal pan reinforcements on full-height sliding doors and
one heavy gauge horizontal pan reinforcement on above and
below ledge sliding doors with built-in pulls and one built-in
lock per pair of doors. Sliding doors - suspend and operate from
integral ball bearing rollers that run on 16-gauge upper tracks
and are contained by 16-gauge lower tracks. Each pair of sliding
doors covers two full sections of 36" wide shelving. NOTE:
Sliding doors are to be used with T-Post uprights only.
Counter Tops - 14-gauge steel with cornice formation at front
and rear. 16-gauge end finishing strips attached with bolts.
Ledges and Ledge Tops - 14-gauge steel with cornice formation
at front. Optional 16-gauge end finishing strips attached with
bolts. Ledge shelves - 18-gauge with optional Class 2 front flange
reinforcements. Ledge shelves - bolted front flanges of existing
shelves and attached to two front upright "T's" with 12-gauge
shelf clips. NOTE: for T-post upright only.
Swinging Doors - heavy gauge steel with one full-height heavy
gauge pan reinforcement per door. Each pair of double swinging
doors has three point latching with one built-in lock. One pair of
double swinging doors covers one full section of 36" wide
shelving.

Parts, Components, Bin Shelving, Boltless Shelving, Bin Units, Heavy Duty Shelving, Industrial Shelves, Industrial Shelving, Lyon
Shelving, Open Shelving, Revolving Shelf Units, and Steel Shelving from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart