FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

SERIES KALC AIR HOISTS

series kalc air hoists
PENDANT THROTTLE CONTROL
Rated Loads: 1, 2, and 3 Tons
Yale KALC Air Hoists are made in single line 1 ton, double line 2 ton and triple line
3 ton models. All units are equipped as standard with pendant throttle control, clutch
overload protection, link chain, and hook or lug suspension. Spark and corrosion
resistant models are also available.
KALC Air Hoists utilize the popular Yale Electric Hoist frame. Practically all
mechanical parts used in these air hoists are interchangeable with comparable
Yale Electric Hoists. This assures users of a proven performance record of
mechanical parts and ease of maintenance. Mechanical load brake offers load
control for the most precise spotting capabilities not found in air hoists without a
mechanical load brake.

Features
* Aluminum Frame and Cover - lightweight, rugged holding shafts and bearings in
   close alignment.
* Gearing - combination of precision cut, heat treated helical and spur gears for
   quiet, efficient operation.
* Mechanical Load Brake - positive action, spring biased Weston type load brake
   holds the load and provides exacting load spotting and control.
* Overload Protection - the overload device protects against excessive overloads...
   clutch also acts at upper and lower limits.
* Multi-vane Rotary Air Motor - eight vanes provide high torque, smooth
   operation, positive starting and excellent control.
* Internal Muffler - reduces sound level.
* Pendant Control - pendant throttle handle is of the full flow design for the finest
   throttling capacities.
* Throttle Valve - precision throttle valves meter the air for smooth operation.

1 Ton Pendant throttle
control air hoist
BASIC HOIST DATA

Rated Loads: 1, 2, and 3 ton (Spark resistant models
are rated a 1/4, 1 and 2 ton.
Air Pressure Recommended: 90 PSI
Air Consumption: 70 SCFM (full load-full speed) slow
speed models; 80 SCFM (full load-full speed) fast speed
model.
Pendant Control Hose: 6 foot pendant hose assemblies
up to 36 foot available.

Lift: 10 foot lifts are standard. Longer lifts are an
optional extra.
Net weight (Basic Hoist): 100 lbs.
Suspension: Hook or lug
Air Inlet Size: 3/4 NPTF
Air Supply Hose Size: 3/4 I.D. min.
HOOK SUSPENSION/CATALOG NUMBERS
AND SPECIFICATIONS
LUG SUSPENSION/CATALOG NUMBERS
AND SPECIFICATIONS
Cap.
(tons)
Catalog No. Wt.
(lbs.)

Parts
of
Load
Chain

Full Load
Hoist
Speed
in
FPM
Full
Load
Lowering
Speed
in
FPM
Standard Models
1 KALC1-10TH13S1 93 1 13 18
KALC1-10TH30S1 95 30 42
2 KALC2-10TH6S2 110 2 6 9
KALC2-10TH15S2 112 15 21
3 KALC3-10TH4S3 144 3 4 6
KALC3-10TH10S3 146 10 14
Spark Resistant Models
1/2 KALC1/2-10TH16S1SR 95 1 16 22
1 KALC1-10TH8S2SR 112 2 8 11
2 KALC2-10TH5S3SR 146 3 5 7
Cap.
(tons)
Catalog No. Wt.
(lbs.)
Parts
of
Load
Chain
Full
Load
Hoist
Speed
in
FPM
Full
Load
Lowering
Speed
in
FPM
Standard Models
1 KALC1-10LG13S1 106 1 13 18
KALC1-10LG30S1 108 30 42
2 KALC2-10LG6S2 116 2 6 9
KALC2-10LG15S2 118 15 21
3 KALC3-10LG4S3 164 3 4 6
KALC3-10LG10S3 166 10 14
Spark Resistant Models
1/2 KALC1/2-10LG16S1SR 110 1 16 22
1 KALC1-10LG8S2SR 120 2 8 11
2 KALC2-10LG5S3SR 170 3 5 7
HOOK SUSPENSION OUTLINE
DIMENSIONS (IN)
LUG SUSPENSION OUTLINE
DIMENSIONS (IN)
Catalog No. A B C D E
KALC1 16 9/16 11 1/16 6 3/4 2 11/16 6 3/16
KALC1/2SR 16 3/4
KALC2 22 1/4 12 13/16 8 1/16 4 7/16 4 7/8
KALC1SR 22 7/8
KALC3 24 14 3/8 5 13/16 5 5/8 7 1/8
KALC2SR 25 7/8
Catalog No. B C D E J K L M N G
KALC1 16 9/16 6 3/4 2 6 3/16 7/8 1 9/16 1 5/16 9 15/16 1 13/16 5/8
KALC1/2SR 16 3/4
KALC2 22 1/4 8 1/16 2 13/16 4 7/8 1 1/2 2 1/2 1 15/16 10 11/16 2 3/16 1
KALC1SR 22 7/8
KALC3 24 5 4/5 4 5/8 7 1/8 2 15/16 3 3 3/8 12 7/8 3 1 1/4
KALC2SR 25 7/8

SPARK RESISTANT MODELS
Spark resistant hoists offer greater protection in hazardous environments. Components for spark resistance includes bronze
alloy hooks with stainless steel hook latches, lower blocks of stainless steel on single part chain and aluminum on 2 and 3
part chain, chrome nickel non-magnetic stainless steel alloy load chain, bronze limit stop with aluminum limit actuators and
modified sprocket and guide. A spark resistant chain container is recommended on 10 foot lift spark resistant hoists and
must be furnished on hoists over 10 foot lift. Spark resistant chain containers are stainless steel.
The spark resistant KALC air hoists have lower speeds and are derated due to the use of stainless steel load chain.
The lower wear life of stainless steel chain limits applications to medium duty service.
When specifying lug suspended spark resistant hoist, care must be taken in the trolley selection to assure that the trolley
fits the derated hoist lug. If this is your first purchase, consult the us for assistance.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


PRICING - KALC AIR HOISTS
MODEL
LIFT
SPD
With Top Hook (TH) With Push Trolley (PT) With Geared Trolley(GT) With Motorized Trolley (MT)
A DIM WT. PRICE A DIM WT. PRICE A DIM WT. PRICE A DIM WT. PRICE
1 TON CAPACITY
KALC1-10*13S1 10 13 16 9/16 93 $5,105 16 1/16 116 $5,376 16 1/16 133 $5,969 16 1/16 188 $8,989
KALC1-10*30S1 10 30 16 9/16 95 $5,231 16 1/16 118 $5,502 16 1/16 135 $6,095 16 1/16 190 $9,115
2 TON CAPACITY
KALC2-10*6S2 10 6 22 1/4 110 $6,282 19 3/4 153 $6,743 19 3/4 167 $7,298 19 3/4 215 $10,243
KALC2-10*15S2 10 15 22 1/4 112 $6,408 19 3/4 155 $6,870 19 3/4 169 $7,424 19 3/4 217 $10,369
3 TON CAPACITY
KALC3-10*4S3 10 4 2 144 $7,294 23 3/4 219 $7,929 23 3/4 236 $8,589 23 3/4 294 $11,963
KALC3-10*10S3 10 10 4 146 $7,422 23 3/4 121 $8,056 23 3/4 238 $8,716 23 3/4 296 $12,091
1/2 TON CAPACITY - SPARK RESISTANT
KALC1/2-10*16S1SR 10 16 16 3/4 95 $6,474 16 1/4 118 $8,704 16 1/4 135 $9,993 16 1/4 190 $11,374
1 TON CAPACITY - SPARK RESISTANT
KALC1-10*8S2SR 10 8 22 7/8 112 $7,447 21 3/8 155 $10,042 21 3/8 169 $11,297 21 3/8 217 $12,427
2 TON CAPACITY - SPARK RESISTANT
KALC2-10*5S3SR 10 5 25 7/8 146 $9,106 25 231 $11,519 25 246 $12,374 25 296 $14,792
Insert TH, LG, PT, GT or MT in place of "*" when ordering. Lug (LG) same price as TH.
Trolleys priced with hoists are for standard flange widths only. Wider widths are available at an additional price, (pick
appropriate hoist - "hook/lug" and select trolley from below.
Contact us to order items below
Add-on Prices for Other Than Standard 10' Lifts Note: 10' lifts are standard, longer lifts available. Equipped
with 6' pendant control hose. Speeds based on 90 psi line
pressure with full rated hoist load. Rated air supply is 80 cfm
(full load - full speed). Always install a filter and lubricator
in air line for each hoist.
Capacity
(tons)
Load Chain
Per Ft. Lift
Plated
Load Chain
Pendant Hose*
Per Foot Lift
Each Added
Ft. of Lift
Hoist
Only
Hoist &
AMDT
Standard Models
1 $19.29 $19.29 $11.17 $18.53
2 $38.58 $38.58 $11.17 $18.53
3 $57.87 $57.87 $11.17 $18.53
Spark and Corrosion Resistant Models
1/2 $89.30 - $11.17 $18.53
1 $178.55 - $11.17 $18.53
2 $267.84 - $11.17 $18.53
Add-on Prices for Other Than Standard 10' Lifts
To compute total price of hoist with other than standard
10' lift, add to the price of desired 10' lift hoist the additional
charges as instructed below:
1. If control hose is to be lengthened, add the charge for
    each additional foot of hose over 6 feet.
2. If load chain is to be lengthened add the charge for each
    additional foot of lift over 10 feet.
KALC Air Chain hoists are Metric Rated
Note: Polyethylene chain containers are standard on
all standard chain hoists 1 ton for 28' lift or less, 2 ton
for 20' lift or less and 3 ton for 16' of lift or less except
for spark resistant models which are not included or
roller chain (YAL only). To price hoists with chain
containers for lifts greater than standard lifts mentioned,
deduct $125 for 2 ton or $205 for 3-ton from standard
20' hoist list price, then add appropriate chain container.
When ordering always specify the following: Lift & Pendant drop
Standard Pendant Control Drop is 6'.
*Maximum pendant control drop is 36'.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

PRICING - PUSH TYPE TROLLEYS FOR LUG SUSPENSION
Trolleys for Standard Flange I-Beams
Prod. Code
Cap. (tons)
Wt.
Adjusted to fit these beam sizes**
Price
Min beam depth (in)
Flange width (in)
905401
1/4 & 1/2
15
4
2 5/8-4 5/8
*504555-5
1/4 & 1/2
16
4
2 5/8-4 5/8
905402
1
23
5
3 - 5
*504554-13
1
23
5
3 - 5
*905403
2
43
6
3 3/8-6
*905404
3
75
6
3 3/8-6
Spark Resistant Models (for Air Hoists)
905461
1/2
15
4
2 5/8-4 5/8
905462
1
23
5
3 - 5
*905463
1
45
6
3 3/8-6
Trolleys for Wider Flange I-Beams
*905405
1
24
5
5 1/4-7 3/8
*505322-6
1
25
5
5 1/4-7 3/8
905405W1
1
26
5
7 1/2-9
*905406
2
44
6
6 1/4-8 7/8
*905407
3
52
6
6 1/8-8 7/8
*905408
3
78
6
9 - 11
PRICING - HAND GEARED TROLLEYS FOR LUG SUSPENSION
Trolleys for Standard Flange I-Beams
Prod. Code
Cap. (tons)
Wt.
Adjusted to fit these beam sizes**
Price
Min beam depth (in)
Flange width (in)
*905411
1
40
6
3 - 5
*905412
2
57
7
3 3/8-6
*905417
3
92
7
3 3/8-6
Spark Resistant Models (for Air Hoists)
*905471
1/2 & 3/4
40
6
3 - 5
*905472
1
57
7
3 3/8-6
Trolleys for W ider Flange I-Beams
*905413
1
41
5
5 1/4-7 3/8
*905414
2
58
6
6 1/4-8 7/8
*905418
3
100
6
6 1/8-8 7/8
*905419
3
102
6
9 - 11

* Equipped with bumpers. Hand Chain Drop is 9'-6".
** For flange widths not shown, apply to factory. Smallest radius curves that these trolleys will negotiate are same as
     push-type trolleys. Spark and corrosion models - Equipped with bronze wheels and vinyl covered bumpers.

For longer than standard 9'-6" hand chain drop, add $10.15 per foot, spark and corrosion resistant models, add $23.94
per foot for aluminum hand chain.

Note: Drop stops are not available on these models.


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

AIR HOIST ACCESSORIES
PRICING - AIR MOTOR-DRIVEN TROLLEYS FOR LUG SUSPENSION
Standard
Trolley Cat. No. Cap. (tons) Standard flange width adj. Wt. (lbs) Traverse speed (fpm) Price
FADT01
1/4, 1/2 & 1 3 - 5" 95 50 $3,884
FADT02
2 3 5/8" - 6" 105 60 $3,960
FADT03
3 4 - 6 1/4" 150 60 $4,669
Spark and Corrosion Resistant
YAMDT01SR 3/8, 1/2, & 3/4 3 - 5" 95 50 $4,899
YAMDT02SR 1 3 5/8" - 6-1/4" 105 60 $4,980
YAMDT03SR 2 4"- 6" 150 60 $5,686
Equipped with 7-foot pendant control hose. For longer than 7-foot control add $12.01/ft. (trolley only).
Always specify the Hoist Product Code Number and that will operate with the trolley.
Models for Patented Track with narrow flat tread steel wheels are available.
Models with extended Beam Flange Adjustment are available.
Maximum pendant control drop is 36 ft.

PRICING - CHAIN CONTAINERS FOR HOISTS
Spark and Corrosion Resistant Container for KALC Air Hoists
Catalog
No.
maximum lift in ft. Wt.
(lbs)
Price
1/2 ton 1 ton 2 ton
905444 15 do not use do not use 4 $454.30
905445 30 15 10 8 $473.76
905446 45 22 15 10 $576.13
905447 60 30 20 14 $683.57
905448 75 37 25 15 $746.17
905449 90 45 30 16 $785.93
Spark and Corrosion Resistant Longer Lift Chain Containers for KALC
Chain Container
Catalog No.
maximum lift in ft. Price
1/2 ton 1 ton 2 ton
439425-*1SR 60 30 20 $890.84
439425-*2SR 90 45 30 $923.83
439425-*3SR 120 60 40 $954.29
439425-*4SR 150 75 50 $974.59
439425-*5SR 180 90 60 $1,005.89
439425-*6SR 210 105 70 $1,043.96
*1/2 ton insert no. 1 - 1 ton insert no. 2 - 2 ton insert no. 3
Link chain hoists using long lift containers must be lug suspended, cross mounted.
Chain containers are supported from the trolley suspension pins.
Chain containers are low headroom design, 10 1/2 inches wide.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

Supplemental, External Muffler, In addition to our standard internal mufflers
Price
KALC Air Chain Hoist or Air Motor Driven Trolley
Deduct Two Lever Pendant Throttle Control, pendant by others
KALC Air Chain Hoist or Air Motor Driven Trolley
-$274.00
Add Six Lever Pendant to Trolley & Hoist
Add Four Lever Pendant to Trolley without hoist
Zinc Plated Hooks
KALC - Add per hook
Drop Stops (safety lugs) and bumpers for AMDT & Heavy Duty Rigid Mount Trolleys
Drop Stops (steel only)
Drop Stops with Rubber Bumpers
Patented Track Wheels Air Motor Driven Trolleys, 3 1/4 inch minimum flange width
Standard Trolley
Spark Resistant Trolley
Food Grade Lubrication Hoists
KALC Air Chain Hoist
Epoxy Enamel Paint, three coat system per date sheet
Each Hoist, Trolley & Chain Container combination
Rigid Top Hook - not available on spark resistant units
KALC 1 & 2 Ton
KALC 3 Ton
Derate and Reset Clutch - KALC
Trolley Travel Limit Switch (trip dog by others)

KALC Air Hoists, Pendant Throttle Control, Air Operated Hoists, Air Hoist, Air Powered Hoist, Chain Hoists, Air Chain Hoists, Hoists,
Shop Air Chain Hoists, and Yale from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart