|
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
|
|
|
Back
to Product Category
5154
SERIES
|
STATIONARY
DRUM ROLLERS
|
|
|
|
|
|
Fixed
Speed Drum Rollers |
SAVES TIME, LABOR AND MONEY
BLEND
INGREDIENTS RIGHT
INSIDE YOUR SEALED DRUM
ELIMINATES TRANSFER,
CLEAN
UP, SPECIAL VESSELS AND
APPARATUS
ENSURES HOMOGENEITY |
|
|
|
|
Designed
to rotate one drum at factory fixed drum speed
of 20 RPM (16 RPM for 50Hz models), based on 22.5"
diameter drum. Drum rolling speed of 20 RPM is good
for most liquids and often used for paint, etc. |
|
|
|
Variable
Speed Control Packages Available
for Model 1-5154-3 and Model 2-5154-3 |
|
|
|
|
|
CAPACITY
PER DRUM:
1,000 LB. LIQUID LOAD
DRY LOAD VARIES:
400 Lb. at 1 to 10 RPM
300 Lb. at 20 RPM
250 Lb. at 30 RPM |
|
Rotate
drums at any speed from 1 to 30 RPM. Find the
best speed for each material. Some use high speed for
initial mixing and low speed for prolonged agitation.
Variable speed drum rollers are ideal for experimental
use or where there is a variety of materials to be handled. |
|
|
|
Variable
speed packages are not available for explosion-
proof drum rollers. |
|
|
A
shifting dry load exerts greater stress on the drum
roller than the fluid motion of a liquid load. |
|
|
|
|
ROTATE
VARIOUS DRUM SIZES: Designed to roll a
steel drum 6" to 28" diameter and up to 40" long. The idler
wheel assembly can be moved closer to the drive shaft for
various drum diameters. Set screws at each wheel permit
easy repositioning to support various length drums. |
|
|
MOTOR
SELECTION: The powerful 1/2 HP motor
drives an efficient worm gear reducer connected to a
solid 1" (2.54 cm) diameter shaft to turn four 6" dia.
neoprene drive wheels. The four idler wheels turn
freely on roller bearings. |
|
|
|
|
GROUNDING
STRAP: Spring steel grounding straps
are standard to help drain possible static charge from drum. |
|
|
|
|
|
The
basic motor is a three phase, 230/460V, 50/60Hz,
inverter duty motor. Explosion-Proof and air motors
are also available. Motor controls are not included
with the basic machines. Standard Stationary Drum
Rollers are shipped without control, cord and plug and
must be installed by an electrician according to local
codes and customer's preference. |
|
|
|
Control
Packages and Guard Enclosure Kits are
sold separately. Click above for pricing details. |
|
|
|
OSHA
Requires Enclosure with Safety Interlock. |
|
|
|
|
|
|
Single
Stationary Drum Rollers |
|
|
Double
Stationary Drum Rollers |
1-5154
Series Fixed Speed Rollers |
|
|
2-5154Series
Fixed Speed Rollers |
|
|
|
|
|
|
|
|
|
|
Base
Dimensions: 24" x 58" (61 x 147 cm)
Shipping Dimensions: 63"L x 40"W x 20"H |
|
|
Base
Dimensions: 24" x 97" (61 x 246 cm)
Shipping Dimensions: 102"L x 40"W x 21"H |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Loading
Methods: |
|
|
Loading
Methods: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get
a drum horizontal with
model 160 Drum Truck.
Then lift it with model 41
Drum Lifting Hook. |
Or
use the Omni-Lift Drum
Racker to place a steel drum
onto your single drum roller. |
|
Use
your hoist or crane and
model 41 Drum Lifting Hook to
load drums onto the drum roller. |
Load
with a MORStak
Drum Racker |
|
|
|
|
|
|
|
|
|
|
|
|
Drum
Rollers Options |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ROLL
PLASTIC DRUMS: |
|
ROLL
A 5-GALLON PAIL: |
Roll
a 55-gallon (208 liter) plastic drum on a stationary
drum roller with option POLY-1-5154 or POLY-2-5154.
It provides extra wheels to support the flexible soft sides
of your 55-gallon plastic drum, and an end stop to prevent
it from traveling lengthwise while being rolled, because
plastic drums lack rigid ribs or roll rings. |
|
Option
# 1-5-2
Idler Attachment to facilitate rolling a pair of 1 to 5 gallon
size (3.8 to 18.9 liters) cylindrical cans or pails. It is easily
removed to return to rolling drums. |
|
Option
# 1-5-1
Idler Attachment to roll just one 5-gallon can or pail. |
|
Drum
Rotators Specifications |
|
Single
Stationary Drum Rollers |
Model
No. |
Drum
RPM
(22.5" dia.) |
Motor
Information |
Control
Packages
Model No. |
Guard
Enclosure
Kits
Model No. |
Motor
Style |
Hp |
Phase |
Motor
Voltage |
Amp
Draw |
1-5154-3 |
20
RPM or Add
Control Package
for 1 to 30 RPM
Variable Speed |
50
or 60Hz
Inverter duty |
1/2 |
3 |
230 |
1.6 |
CP-1-5154-1-115* |
GEK-1-5154-3 |
230 |
1.6 |
CP-1-5154-1-230* |
230 |
1.6 |
CP-1-5154-3-230* |
460 |
0.8 |
CP-1-5154-3-460* |
1-5154-E1 |
20 |
60Hz
Explosion proof ** |
1/2 |
1 |
115 |
7.4 |
CP-1-5154-E1-115* |
GEK-1-5154-E1 |
230 |
3.7 |
CP-1-5154-E1-230* |
1-5154-E1-50 |
16 |
50Hz
Explosion proof** |
1/2 |
1 |
220 |
3.6 |
CP-1-5154-E1-220-50* |
GEK-1-5154-E1 |
1-5154-E3 |
20 |
60Hz
Explosion proof ** |
1/2 |
3 |
208,
230 |
2.0,
2.1 |
CP-1-5154-E3-230* |
GEK-1-5154-E3 |
460 |
1.0 |
CP-1-5154-E3-460* |
1-5154-E3-50 |
16 |
50Hz
Explosion proof ** |
1/2 |
3 |
230 |
1.7 |
CP-1-5154-E3-230-50* |
GEK-1-5154-E3 |
400 |
1.0 |
CP-1-5154-E3-400-50* |
1-5154-E3-575 |
20 |
60Hz
Explosion proof** |
1/2 |
3 |
575 |
0.7 |
CP-1-5154-E3-575* |
GEK-1-5154-E3 |
1-5154-A |
20
(Vary with airflow & pressure) |
Air
Motor*** |
- |
- |
- |
- |
Air
Controls are included
with model 1-5154-A*** |
GEK-1-5154-A |
|
*Only
Non-Explosion Proof AC Control Packages include a pre-wired control box.
Models with explosion proof Control Packages
have no wiring from the NEMA 7/9 control box to the motor. Please consult
an electrician to complete the wiring in accordance to
your local code.
**Explosion Proof motors are rated for Class I Group D, and Class II Groups
F and G. Variable speed models are NOT available for
hazardous areas.
***Air powered model requires plant air at 20 to 40 psi and flowing at a
rate of 22 scfm. Filter, Regulator, Lubricator and valve
are included with drum roller model 1-5154-A. |
|
Double
Stationary Drum Rollers |
Model
No. |
Drum
RPM
(22.5" dia.) |
Motor
Information |
Control
Packages
Model No. |
Guard
Enclosure
Kits Model No. |
Motor
Style |
Hp |
Phase |
Motor
Voltage |
Amp
Draw |
2-5154-3 |
20
RPM or
Add Control
Package for
1 to 30 RPM
Variable Speed |
50
or 60Hz Inverter duty |
1 |
3 |
230 |
2.8 |
CP-2-5154-1-115
* |
GEK-2-5154-3 |
230 |
2.8 |
CP-2-5154-1-230
* |
230 |
2.8 |
CP-2-5154-3-230
* |
460 |
1.4 |
CP-2-5154-3-460
* |
2-5154-E1 |
20 |
60Hz
Explosion proof ** |
1 |
1 |
115 |
13 |
CP-2-5154-E1-115* |
GEK-2-5154-E1 |
230 |
6.5 |
CP-2-5154-E1-230
* |
2-5154-E1-50 |
16 |
50Hz
Explosion proof** |
1 |
1 |
220 |
6.2 |
CP-2-5154-E1-220-50* |
GEK-2-5154-E1 |
2-5154-E3 |
20 |
60Hz
Explosion proof** |
1 |
3 |
208/230 |
3.8/3.6 |
CP-2-5154-E3-230* |
GEK-2-5154-E3 |
460 |
1.8 |
CP-2-5154-E3-460* |
2-5154-E3-50
|
16 |
50Hz
Explosion proof** |
1 |
3 |
230 |
3.45 |
CP-2-5154-E3-230-50* |
GEK-2-5154-E3 |
400 |
2.0 |
CP-2-5154-E3-400-50* |
2-5154-E3-575 |
20 |
60Hz
Explosion proof** |
1 |
3 |
575 |
1.5 |
CP-2-5154-E3-575* |
GEK-2-5154-E3 |
2-5154-A |
20
(Vary with air
flow & pressure) |
Air
Motor*** |
- |
- |
- |
- |
Air
Controls are included
with model 2-5154-A*** |
GEK-2-5154-A |
|
*ONLY
NON-Explosion Proof AC Control Packages include a pre-wired control box.
Models with explosion proof
Control Packages have no wiring from the NEMA 7/9 control box to the motor.
Please consult an electrician to
complete the wiring in accordance to your local code.
**Explosion Proof motors are rated for Class I Group D, and Class II Groups
F and G. Variable speed models are
NOT available for hazardous areas.
***Air powered model requires plant air at 40 to 60 psi and flowing at a
rate of 40 scfm. Filter, Regulator, Lubricator
and valve are included with drum roller model 2-5154-A. |
|
|
|
|
|
Order
Online, by Phone, or by E-mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
Single
Stationary Drum Rollers Prices |
Model
No. |
Description |
Price |
Motor Controls Sold Separately, OSHA Requires Enclosure |
|
20
RPM, 1/2 HP, 3-Phase, 230/460V, 50/60HZ Inverter Duty Motor |
$3,533 |
|
20
RPM, 1/2 HP, Explosion Proof, 1-Phase, 115/208-230V, 60Hz Motor |
$4,306 |
|
20
RPM, 1/2 HP, Explosion Proof, 1-Phase, 115/208-230V, 60Hz Motor |
$4,978 |
|
16
RPM, 1/2 HP, Explosion Proof, 1-Phase, 110/220V, 50Hz Motor |
$4,224 |
|
20
RPM, 1/2 HP, Explosion Proof, 3-Phase, 208-230/460V, 60Hz Motor |
$4,908 |
|
16
RPM, 1/2 HP, Explosion Proof, 3-Phase, 230/400V, 50Hz Motor |
$4,113 |
|
20
RPM, Air Motor (Motor Controls Included) |
$3,943 |
|
|
Double
Stationary Drum Rollers Prices |
Model
No. |
Description |
Price |
Motor Controls Sold Separately, OSHA Requires Enclosure |
|
20RPM,
1HP, 3-Phase, 230/460V, 50/60HZ Inverter Duty Motor |
$5,025 |
|
20
RPM, Air Motor (Motor Controls Included) |
$5,675 |
|
20RPM,
1 HP, Explosion Proof, 1-Phase, 115/230V, 60Hz Motor |
$6,377 |
|
16RPM,
1 HP, Explosion Proof, 1-Phase, 110/220V, 50Hz Motor |
$6,868 |
|
20RPM,
1 HP, Explosion Proof, 3-Phase, 208-230/460V, 60Hz Motor |
$6,868 |
|
16RPM,
1 HP, Explosion Proof, 3-Phase, 230/400V, 50Hz Motor |
$6,786 |
|
20RPM,
1 HP, Explosion Proof, 3-Phase, 56C 575V, 60Hz Motor |
$7,125 |
|
|
Drum
Roller Options Pricing |
Model
No. |
Description |
Price |
For
Single Drum Rollers |
|
Plastic
Drum Rollers Factory Installed |
$702 |
|
Field
Installation Kit for Plastic Drum Rollers |
$720 |
|
1-5
Gallon Can Idler Attachment |
$250 |
For
Double Drum Rollers |
|
Plastic
Drum Rollers Factory Installed |
$1,141 |
|
Field
Installation Kit for Plastic Drum Rollers |
$1,158 |
|
Pair
of 1-5 Gallon Cans Idler Attachment |
$503 |
|
|
Control
Packages (sold separately) |
|
|
|
|
Control
Mast and the appropriate Control Box for each model. Use power controls
to start and stop drum rolling.
The control mast can be positioned outside the Safety Enclosure on either
side, or at the back of Drum Roller. |
|
|
|
|
|
|
AC
Control Package NEMA 4/12 for NON-Hazardous Areas |
|
Includes
Control Box with:
Timer adjusts from a few seconds to 16 hours
Start and Stop Buttons
Variable Speed: Control drum rotation from 1 to 30 RPM
Red Emergency Stop Button
Lockable Main Disconnect to shut off and lock out power to the
unit
24V DC Control Supply
Wire terminals for external connection of safety interlock switch |
|
|
|
|
|
|
|
|
|
|
|
Explosion
Proof AC Control Package NEMA 7/9 for Hazardous Areas |
|
|
|
|
|
Includes
Control Box with:
Start and Stop Buttons
Wire terminals for external connection of safety interlock switch |
|
|
|
|
|
|
|
Control
Packages for Single Drum Rollers Prices |
Model
No. |
For
Use With |
Min.
Power
Required |
Power
Supply |
Drum
RPM
(22.5" Dia.) |
Drum
Roller Cap.
|
CP-1-5154-1-115* |
1-5154-3 |
20
Amp |
1-Phase
115V 60Hz |
Variable
Speed
1 to 30 RPM |
Liquid
Load:
1,000 Lb.
Dry Load Varies:
-400 Lb. at 1 RPM
-400 Lb. at 10 RPM
-300 Lb. at 20 RPM
-250 Lb. at 30 RPM |
CP-1-5154-1-230* |
1-5154-3 |
15
Amp |
1-Phase
230V 60Hz |
CP-1-5154-3-230* |
1-5154-3 |
15
Amp |
3-Phase
230V 60Hz |
CP-1-5154-3-460* |
1-5154-3 |
10
Amp |
3-Phase
460V 60Hz |
CP-1-5154-E1-115* |
1-5154-E1,
Explosion-Proof |
20
Amp |
1-Phase
115V 60Hz |
20
RPM |
Liquid
Load:
1,000 Lb.
Dry Load:
300 Lb. |
CP-1-5154-E1-230* |
1-5154-E1,
Explosion-Proof |
15
Amp |
1-Phase
230V 60Hz |
CP-1-5154-E3-230* |
1-5154-E3,
Explosion-Proof |
15
Amp |
3-Phase
230V 60Hz |
CP-1-5154-E3-460* |
1-5154-E3,
Explosion-Proof |
10
Amp |
3-Phase
460V 60Hz |
CP-1-5154-E3-575* |
1-5154-E3-575,
Explosion-Proof |
10
Amp |
3-Phase
575V 60Hz |
CP-1-5154-E1-220-50* |
1-5154-E1-50,
Explosion-Proof |
15
Amp |
1-Phase
220V 50Hz |
16
RPM |
CP-1-5154-E3-230-50* |
1-5154-E3-50,
Explosion-Proof |
15
Amp |
3-Phase
230V 50Hz |
CP-1-5154-E3-400-50* |
1-5154-E3-50,
Explosion-Proof |
10
Amp |
3-Phase
400V 50Hz |
|
|
|
|
|
Order
Online, by Phone, or by E-mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
Control
Packages for Single Drum Rollers Prices |
Model
No. |
For
Use With |
Description |
Price |
|
1-5154-3 |
1-PH
115V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$3,890 |
|
1-5154-3 |
1-PH
230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$3,838 |
|
1-5154-3 |
3-PH
230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$3,814 |
|
1-5154-3 |
3-PH
460V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$3,867 |
|
1-5154-E1 |
Explosion-Proof
1-Phase 115V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$4,785 |
|
1-5154-E1-50 |
Explosion-Proof
1-Phase 220V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,230 |
|
1-5154-E1 |
Explosion-Proof
1-Phase 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,230 |
|
1-5154-E3 |
Explosion-Proof
3-Phase 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,815 |
|
1-5154-E3-50 |
Explosion-Proof
3-Phase 230V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,815 |
|
1-5154-E3-50 |
Explosion-Proof
3-Phase 400V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,815 |
|
1-5154-E3 |
Explosion-Proof
3-Phase 460V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,230 |
|
1-5154-E3-575 |
Explosion-Proof
3-Phase 575V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,815 |
|
|
Control
Packages for Double Drum Rollers |
Model
No. |
For
Use With |
Min.
Power
Required |
Power
Supply |
Drum
RPM
(22.5" Dia.) |
Drum
Roller Cap.
|
CP-2-5154-1-115* |
2-5154-3 |
20
Amp |
1-Phase
115V 60Hz |
Variable
Speed
1 to 30 RPM |
Liquid
Load:
1,000 Lb.
Dry Load Varies:
-400 Lb. at 1 RPM
-400 Lb. at 10 RPM
-300 Lb. at 20 RPM
-250 Lb. at 30 RPM |
CP-2-5154-1-230* |
2-5154-3 |
15
Amp |
1-Phase
230V 60Hz |
CP-2-5154-3-230* |
2-5154-3 |
15
Amp |
3-Phase
230V 60Hz |
CP-2-5154-3-460* |
2-5154-3 |
10
Amp |
3-Phase
460V 60Hz |
CP-2-5154-E1-115* |
2-5154-E1,
Explosion-Proof |
20
Amp |
1-Phase
115V 60Hz |
20
RPM |
Liquid
Load:
1,000 Lb.
Dry Load:
300 Lb. |
CP-2-5154-E1-230* |
2-5154-E1,
Explosion-Proof |
15
Amp |
1-Phase
230V 60Hz |
CP-2-5154-E3-230* |
2-5154-E3,
Explosion-Proof |
15
Amp |
3-Phase
230V 60Hz |
CP-2-5154-E3-460* |
2-5154-E3,
Explosion-Proof |
10
Amp |
3-Phase
460V 60Hz |
CP-2-5154-E3-575* |
2-5154-E3-575,
Explosion-Proof |
10
Amp |
3-Phase
575V 60Hz |
CP-2-5154-E1-220-50* |
2-5154-E1-50,
Explosion-Proof |
15
Amp |
1-Phase
220V 50Hz |
16
RPM |
CP-2-5154-E3-230-50* |
2-5154-E3-50,
Explosion-Proof |
15
Amp |
3-Phase
230V 50Hz |
CP-2-5154-E
3-400-50* |
2-5154-E3-50,
Explosion-Proof |
10
Amp |
3-Phase
400V 50Hz |
|
|
|
|
|
Order
Online, by Phone, or by E-mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
Control
Packages for Double Drum Rollers Prices |
Model
No. |
For
Use With |
Description |
Price |
|
2-5154-3 |
1-Phase
115V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$3,966 |
|
2-5154-3 |
1-Phase
230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$3,803 |
|
2-5154-3 |
3-Phase
230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$3,797 |
|
2-5154-3 |
3-Phase
460V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect |
$4,001 |
|
2-5154-E1 |
Explosion-Proof
1-Phase ASE 115V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$4,785 |
|
2-5154-E1-50 |
Explosion-Proof
1-Phase ASE 220V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,265 |
|
2-5154-E1 |
Explosion-Proof
1-Phase ASE 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,230 |
|
2-5154-E3 |
Explosion-Proof
3-Phase ASE 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,230 |
|
2-5154-E3-50 |
Explosion-Proof
3-Phase ASE 230V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,265 |
|
2-5154-E3 |
Explosion-Proof
3-Phase ASE 400V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,815 |
|
2-5154-E3 |
Explosion-Proof
3-Phase ASE 460V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,230 |
|
2-5154-E575 |
Explosion-Proof
3-Phase ASE 575V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch |
$5,815 |
|
|
Guard
Enclosure Kits with Safety Interlock (sold separately) |
Comply
with OSHA Requirements with a Guard Enclosure Kit |
|
|
|
Guard
Enclosures for Morse Stationary Drum Rollers
have a safety interlock to automatically shut off the
drum roller when the gate is opened. Open the enclo-
sure gate, place your drum onto the drum roller, then
close the gate to allow operation. Connections are
included for air powered model only. Control Package
options provide controls and connections for AC models. |
|
For OSHA
compliance in the USA, see OSHA sub-
part O.1910.212(a)(4) "Barrels, containers, and drums.
Revolving drums, barrels, and containers shall be
guarded by an enclosure which is interlocked with the
drive mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in place." |
|
|
|
All
Control Packages include a low voltage transformer
and wire terminals required to connect the external safety
interlock switch of these Guard Enclosure Kits. Control
Packages and Enclosures meet OSHA regulations ONLY
when installed properly with safety interlock. |
|
|
Install
all Rotators in accordance with local requirements
for enclosure and safety interlock, etc. One way to
accomplish this is with an enclosure with safety interlock,
so the rotator automatically turns off when enclosure door
is opened. Power connections and motor controls must
also comply with applicable local codes. |
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
Guard
Enclosure Kits with Safety Interlock For Single Drum Rollers Prices |
Model
No. |
Description |
Price |
|
1-Phase
AC Field Installation Kit |
$4,235 |
|
3-Phase
AC Field Installation Kit |
$4,235 |
|
Air
Powered Field Installation Kit |
$4,785 |
|
Explosion-Proof
1PH AC Field Installation Kit |
$4,715 |
|
Explosion-Proof
3PH AC Field Installation Kit |
$4,715 |
|
|
|
|
|
|
Order
Online, by Phone, or by E-mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
Guard
Enclosure Kits with Safety Interlock For Double Drum Rollers Prices |
Model
No. |
Description |
Price |
|
1-Phase
AC Field Installation Kit |
$5,499 |
|
3-Phase
AC Field Installation Kit |
$5,031 |
|
Air
Powered Field Installation Kit |
$5,581 |
|
Explosion-Proof
1PH AC Field Installation Kit |
$5,522 |
|
Explosion-Proof
3PH AC Field Installation Kit |
$5,522 |
|
|
Stationary Drum Rotators,
Morse 5154, Mix, Blend, Variable Speed, Drum Dumpers, Drum Rotators, Dumpers,
Barrel Dumpers,
Drum Handlers, Drum Handling, and Drum Lifting from your source for material
handling equipment. |
Back
to Product Category |
|
|