FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

ROUGHDECK ROUGH-N-READY SYSTEM

FLOOR SCALE/INDICATOR PACKAGE

floor scale / indicator The Rough-n-Ready System Floor Scale/Indicator
Package
features quick connects and factory calibration
which allow the package to operate immediately with minimal
setup. This time saving solution combines a 5000 division
RoughDeck floor scale with the choice of an IQ plus 355,
IQ plus 390-DC, IQ plus 590-DC or 420 plus digital
indicator. Ideal for shipping/receiving and manufacturing
applications, this impressive system comes complete with
an indicator tilt stand, 20' of SURVIVOR EL147HE
6-conductor hostile environment load cell cable and a
quick connection.
APPLICATIONS
Legal-For-Trade applications
Shipping and receiving
(Shown with optional floor stand for indicator. Setup
and calibration is done at Rice Lake Weighing Systems.
Package includes 4 x 4 - 5,000 LB or 10,000 LB mild steel
RoughDeck only.)
Manufacturing
General-purpose weighing
STANDARD FEATURES
PACKAGE INCLUDES:
RoughDeck HP FloorScale:
IQ plus® 355, 420 Plus, IQ plus® 390-DC,
or IQ plus® 590-DC indicator, RoughDeck
4' x 4' floor scale, 20 ft of hostile environment
load cell cable and quick disconnect.
NTEP certified, Legal-For-Trade; Canadian Weights &
    Measures certified
Four welded steel shear beam load cells
Load cells protected on all four sides
Heavy-duty industrial design
APPROVALS Rugged diamond safety treadplate deck
Rigid structural steel channel frame
Four adjustable steel SUREFOOT™ support feet
Unique side-entry "integral" junction box
Signal trim summing board
Threaded eyebolt holes for easy lifting
Four corner overload stops (Canadian versions only)
Level bubble (Canadian versions only)
20 ft of SURVIVOR EL147HE hostile environment load
    cell cable
FM-approved load cells

CHOICE OF 4 QUALITY INDICATORS
IQ PLUS® 355 Digital Weight Indicator
scale indicator APPLICATIONS
Straight weighing Floor and bench scales
Agricultural Tank weighing
Truck scales
STANDARD FEATURES
Large .8" (20.3mm) Light Emitting
   Diode LED) Display
2 independent communication ports:
  (1) full duplex, (1) unidirectional or
   active 20mA current loop
Configurable analog to digital
   measurement rate
Standardized EDP command sets
Power for 8 350-ohm load cells or
  16 700-ohm load cells
Programmable ticket formats up to
  two 300-character printouts
MODELS
IQ plus 355, 115 VAC
IQ plus 355, uncased, 115 VAC
IQ plus 355, 230 VAC
IQ plus 355, 230 VAC, CE
  marked/OIML approved
Primary/secondary units con-
   figuration:  LB, kg, ounces, short
   tons, metric tons,   grams, or none
Full front-panel digital calibration and
 configuration
Universal mounting stand
NEMA 4X/IP66 stainless steel
  washdown enclosure
Three-stage digital filtering
Consecutive transaction numbering
5-button operation Two digital inputs
OPTIONS/ACCESSORIES
Analog output: selectable 0-10V,
  4-20 mA
Revolution Scale software
Additional operating manual
Panel mount kit
IQ PLUS® 390-DC Battery Powered Digital Weight Indicator
scale indicator APPLICATIONS
Washdown environments Floor and bench scales
Portable scales Agricultural
Warehousing Portable counting
STANDARD FEATURES
NEMA 4X/IP66-rated stainless steel
  enclosure
AC adapter for 115 or 230 VAC
  power
Large 1-inch six-digit LCD display Configurable standby mode that
   saves battery life
Six-button operation
MODELS
Power for four 350-ohm load cells
   or eight 700-ohm load cells
RATTLETRAP three-stage digital
  filtering
IQ plus 390-DC Battery Powered
  Indicator with 115 VAC wall adaptor
IQ plus 390-DC Battery Powered
  Indicator with 230 VAC wall adaptor
IQ plus 390-DC Battery Powered,
  CE marked (voltage adapter sold
  separately)
Configurable units multiplier Piece count mode
Supports 4- and 6-wire load cell
  connections
EDP port for full duplex, RS-232
 communications
Powered by 6 "C" batteries for
  complete portability

OPTIONS/ACCESSORIES scale indicator The optional livestock weighing program allows
accurate results regardless of animal
movement. The program operates easily by
accumulating weight readings for a defined
sample period. The weight is then divided by
the number of readings to obtain an average
weight. This value is displayed on the
390-DC for a defined period. The indicator
then returns to normal weighing mode.
Livestock weighing program
Revolution™ scale software
Additional operating manual

IQ PLUS® 590-DC Battery Powered Digital Weight Indicator
scale indicator APPLICATIONS
Washdown environments Floor and bench scales
Portable scales Agricultural
Warehousing Portable counting
STANDARD FEATURES
Full numeric keypad Large 1" (24.5mm), six-digit LCD
  display
Keyboard entry of piece weight, tare
  weight, calibration, and sample size
AC adapter for 115 or 230 VAC
 power
Display tare button
MODELS
Powered by six C-cell alkaline
  batteries for complete portability
(batteries not included)
Configurable standby mode to prolong
 battery life
IQ plus 590-DC Battery Powered
 Indicator with 115 VAC wall adapter
IQ plus 590-DC Battery Powered
 Indicator with 230 VAC wall adapter
IQ plus 590-DC, Battery powered,
 CE marked (voltage adapter sold
 separately)
RATTLETRAP three-stage digital
  filtering
Revolution™ Scale software support
Three 300-character print ticket
  formats
Configurable units multiplier
Configurable analog to digital
  measurement rate
Power for four 350-ohm load cells or
  eight 700-ohm load cells
Self-resetting thermal fuse
Supports 4- and 6-wire load cell
  connections
OPTIONS/ACCESSORIES
Revolution™ Scale software
EDP port for full duplex, RS232
 communications
Additional operating manual
NEMA 4x/IP66-rated stainless steel
  enclosure

420 Plus HMI Digital Weight Indicator
scale indicator STANDARD FEATURES
Large .8” (20.3 mm) Light Emitting
   Diode (LED) Display
Programmable ticket formats up
   to three 300-character printouts
Full numeric keypad

Full front-panel digital calibration
   and configuration

NEMA 4X/IP66 stainless steel
   washdown enclosure
Universal mounting stand
Power for eight 350 ohm load cells
   or sixteen 700 ohm load cells
Three-stage digital filtering
Consecutive transaction numbering
Configurable analog to digital
   measurement rate
Two digital inputs, two digital
   outputs
Primary/secondary units con-
   figuration: lb, kg, ounces, short
   tons, metric tons, grams, or none
Time and date (volatile)
Count mode
MODELS
Two independent communication
   ports: (2) full duplex, (1) uni-
   directional active 20 ma current loop
OPTIONS/ACCESSORIES
420, 115 VAC
420, 230 VAC
420, 230 VAC
420, 9-36 VDC
Analog output: selectable 0-10V,
  4-20 ma
Standardized EDP command sets Panel mount kit
Revolution™ Scale software
Additional operating manual

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Part No. of the item you wish to purchase.

PRICING FOR ROUGHDECK™ ROUGH-N-READY
Part #
Floor Scale Capacity
Indicator
Est.
Ship
Wgt.
Price
 115 VAC - 4 ft x 4 ft RoughDeck Indicator Package with tilt Stand  
 5,000lb 
 IQplus®590 
 405lb 
$3,708
 5,000lb 
 IQplus390 
 405lb 
$3,708
 5,000lb 
 420Plus 
 405lb 
$3,708
 5,000lb 
 IQplus355 
 405lb 
$3,433
 10,000lb 
 IQplus590 
 405lb 
$3,708
 10,000lb 
 IQplus390 
 405lb 
$3,708
 10,000lb 
 420Plus 
 405lb 
$3,708
 10,000lb 
 IQplus355 
 405lb 
$3,433
 230 VAC - 4 ft x 4 ft RoughDeck Indicator Package with tilt Stand  
 5,000lb 
 IQplus590 
 405lb 
$3,708
 5,000lb 
 IQplus390 
 405lb 
$3,708
 5,000lb 
 420Plus 
 405lb 
$3,708
 5,000lb 
 IQplus355 
 405lb 
$3,433
 10,000lb 
 IQplus590 
 405lb 
$3,708
 10,000lb 
 IQplus390 
 405lb 
$3,708
 10,000lb 
 420Plus 
 405lb 
$3,708
 10,000lb 
 IQplus355 
 405lb 
$3,433
 115 VAC 4 ft x 4 ft RoughDeck Canadian Weights & Measures Approved Indicator with tilt Stand  
 2,500kg 
 IQplus590 
 405lb 
$3,708
 2,500kg 
 IQplus390 
 405lb 
$3,708
 2,500kg 
 420Plus 
 405lb 
$3,708
 2,500kg 
 IQplus355 
 405lb 
$3,433
 5,000kg 
 IQplus590 
 405lb 
$3,708
 5,000kg 
 IQplus390 
 405lb 
$3,708
 5,000kg 
 420Plus 
 405lb 
$3,708
 5,000kg 
 IQplus355 
 405lb 
$3,433
OPTIONS/ACCESSORIES
Floor anchor plates, mild steel (set of two) IQ plus 355, IQ plus 390-DC and IQ plus 590-DC Indicator:
Floor anchor plates, stainless steel (set of two) Analog output: selectable 0-10V, 4-20mA, IQ plus 355 only
Floor stand for indicator, 33.6" high, mild steel Panel mount kit, IQ plus 355 only
Additional operating manual Revolution Scaleware software
Access ramps. Additional operating manual, IQ plus 355
Additional operating manual, IQ plus 390-DC
acces ramp
Additional operating manual, IQ plus 590-DC
Additional operating manual, 420 Plus
Access Ramp

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Part No. of the item you wish to purchase.

PRICING FOR OPTIONS/ACCESSORIES
PART #
DESCRIPTION
PRICE
Floor anchor plates, mild steel (set of two)
$50.00
RoughDeck floor stand for indicator, 36.3" high, mild steel
$341.67
Additional operating manual
$16.67
Revolution Scaleware™ software
$58.33
Additional operating manual, IQ plus 355
$41.67
Additional operating manual, 420 Plus
$41.67
Additional operating manual, IQ plus 390-DC
$41.67
Additional operating manual, IQ plus 590-DC
$41.67
Roughdeck Rough-N-Ready System, Floor Scale/Indicator Package, Factory Calibration, Digital Indicator, Shipping
and Receiving, Manufacturing, General-Purpose Weighing, RoughDeck HP FloorScale, Rugged Diamond Safety
Treadplate Deck, and FM-Approved Load Cells from your complete source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart