ENGINEERED STEEL PRODUCTS

Priced Full Line Products Catalog

20 Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679

MORStak™ Forklift Mounted Drum Rackers

MODEL 289F & MODEL 289C

Fork truck attachments to rack drums		• Eliminate "bare fork" drum handling • Move drum on and off rack, pallet, truck, etc. • Control drum tilt from your forklift with battery- powered tilt • Securely clamp drum into holder • Lift drum from upright or horizontal position • Place drum upright or horizontally



		With the safety conscious MORStak™ Forklift Mounted Drum Rackers, you can move drums on and off racks, pallets, trucks, etc. with your forklift. Lift an upright drum and place in horizontal position. Rack rimmed 55-gallon steel or plastic drums weighing up to 800 Lb. side by side with virtually zero clearance between them. Handle your drum with a drum faucet in place - see diagram (bottom of page). This allows your drum rack to serve as a dispensing station.
Model 289F MORStak™ Fork Mounted Drum Racker
Model 289F MORStak™ Fork Mounted Drum Racker	A 2-button pendant reaches back to the forklift operator to control drum tilting. Forklift mounted drum rackers feature battery powered tilt with self contained hydraulics. They have a positive drum gripping mechanism that must be manually engaged before lifting an upright drum or tilting a drum from horizontal position. MORStak™ drum rackers will not allow you to tilt your drum without the clamp engaged.

MORStak™ forklift mounted drum rackers include a 12V deep cycle battery and charger. They do not connect to the hydraulics or power of your forklift.


MORStak™ Fork Mounted Drum Racker - Model 289F


With Model 289F MORStak™ Fork Mounted Drum Racker in place on your forklift, you can rack a drum with your forklift. Rack drums side by side with virtually zero clearance between them.	Manually clamp an upright drum into the holder, then lift and tilt it to horizontal position.

		You can lift your upright drum from the floor or off a pallet.


		After removing your drum from a rack with the MORStak™ Fork Mounted Drum Racker, secure the clamp before tilting the drum back to upright position.

Tilt the drum to racking position - raise and tilt your rimmed 55-gallon plastic or steel drum to horizontal position. Then transport the drum to the rack with your forklift.	Before placing your drum into the rack, release the clamp.


MORStak™ Forklift Mounted Drum Racker - Model 289C


With Model 289C MORStak™ Forklift Carriage Mounted Drum Racker in place on your ITA Class 2 forklift carriage, you can rack a drum with your forklift. Rack drums side by side with virtually zero clearance between them.			Manually clamp an upright drum into the holder, then lift and tilt it to horizontal position. Release the clamp to rack the drum. You can lift an upright drum from the floor or a pallet. Tilt the drum to racking position. Then transport the drum and raise it to the rack with your forklift.

Option: Wireless Control

Safe, simple and reliable wireless machine control

• Approximately 300 foot (91 m) operating range featuring 900MHz frequency hopping technology for eliminating interference from other RF sources • Easily switch between direct wire pendant control and wireless remote control • Quick DC power disconnect for locking out the equipment • Option # 4804i-P - Wireless Control factory installed on new model 285C or 289F. Can also be installed on model 285A-BP Forklift-Karrier. • Kit # 4804-P - Kit to field install Wireless Control on your model 285C or 289F

MORStak™ Forklift Mounted Drum Rackers handle ONLY a 55-gallon steel or plastic drum with top rim, and maximum weight of 800 Lb. They will NOT handle a smaller drum or a drum without a top rim.

Watch Video Here


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

MODEL 289 PRICES

Model No.	Description	Weight	Price
289F	Fork Mounted Drum Racker	622 lbs	$10,202
289C	Carriage Mounted Drum Racker	600 lbs	$10,027
Wireless Control Option
4804i-P	Factory Installed	3 lbs	$1,106
4804-P	Field Installation Kit	3 lbs	$1,152


DRUM FAUCETS


Model 65-20 Molasses Gate Faucet for viscous liquids is made of grey iron with a brass sliding plate closure. Sized for 2" pipe thread.				Model 68-20 Polyethylene Faucet Ideal for use with nonflammable, corrosive liquids. Has a fast half-turn on/off handle that stays open until you close it. Use to control dispen- sing of viscous liquids through the 2" bung of your metal drum.
Model 65-75 is like model 65-20, but sized for 3/4" bung of metal drum.
				Model 68-75 is like model 68-20 above, but sized for 3/4" bung thread. Use for more fluid liquids.


			Order Online, by Phone, or by E-mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

DRUM WRENCHES/FAUCETS PRICES



	MORStak Drum Rackers will rack a drum with any of the following Drum Faucets in place on the drum: - Model 62-5 Self Closing Safely Drum Faucet - Model 60D Self Closing Faucet - Model 65-20 2" Molasses Gate - Model 65-75 3/4" Molasses Gate - Model 68-20 2" Poly Faucet - Model 68-75 3/4" Poly Faucet