FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

MODELS 90, 91, 92

DRUM LIFTERS

90 SERIES VERTI-KARRIERS
MOVE & PLACE DRUMS ALMOST ANYWHERE
AUTOMATIC GRAB & HOLD-OPEN CYCLE
MODEL 90 VERTI-KARRIER
This unit automatically grabs and releases a closed steel drum, and
picks or places drum on a pallet. This advanced lifter is based on the
original Morse patent. Attach the Verti-Karrier to your hoist, move the
karrier to the drum, and then lift. It grips automatically and releases its
hold only when the drum is put down. The operator only needs to
guide the grab into position. Handle closed standard steel 55-gallon
(210 liter) drum, tight-head or removable top with lid clamped on.
Capacity: 1,000 Lb. (454 kg).
MODEL 90-SS is made of type 304 stainless steel
MODEL 90-30 for 30-gallon drum
MODEL 90-85 for 85-gallon steel salvage drum
MODEL 90-SS
90 series verti-karriers
90 series verti-karriers
90 series verti-karriers
90 SERIES OPERATION
1. Attach Drum Lifter to your hoist and move to the drum. Automatic latch keeps the grippers open until it settles
    on top of the drum.
2. The open grippers and cross plates help it settle and stand in place on drum. Latch automatically shifts so
    Drum Lifter will grip drum during lift.
3. Raise hoist to close the grippers and lift the drum. Grippers press equally on both sides of the drum.
4. Drum Lifter tightly grips drum until weight is fully down. Then it releases the deposited drum and remains open
    to repeat the lifting cycle.

MODEL 91 LIFTER FOR DRUM OR OVERPACK
Morse invented this lifter for placing a steel 55-gallon (208 liter) drum
into an overpack or salvage drum. It can also be used to move a steel
overpack drum. What makes this lifter effective and simple to use is its
carefully designed ice-tong-like geometry and broad faced, thin profile
grippers. The broadness of the grippers spreads the holding force to
minimize pressure on the drum. The narrow profile enables it to lower
the drum completely into the overpack. The Model 91 can also be used
to lift and move a closed steel salvage drum. Model 91 is load tested and
factory certified at 125% of rated capacity as per American National
Standard ASME B30.20.
Handle: 55-gallon steel drum into overpack. 85-gallon (325 liter) steel
overpack. Capacity: 1,000 Lb. (454 kg)

92 SERIES DRUM LIFTERS
LIFTS A RANGE OF SIZES AND TYPES!
PUT DRUMS INTO OVERPACK
92 series drum lifters
MODEL 92 DRUM LIFTER
Self adjusting tong-like action automatically grips various common types of
closed drums. Slim-profile grippers allow you to lower a drum into
overpacks... place 30's into 55's, or 55's into 85's. Note: Rim must be within
1" of the top of drum to be lifted. Drum lid must be properly secured. Do
not exceed drum manufacturer's packing limit. Each unit is load tested at
the factory at 125% of rated capacity as per American National Standard
ASME B30.20, and a load test certificate is supplied. Handle steel, fiber or
plastic drum with 18" to 26" (45.7 to 66 cm) inside diameter, including 30,
55 and 85-gallon steel drum, leverlock fiber drum, & rimmed plastic drum.
Capacity: 1,000 Lb. (454 kg).
Model 92 Drum Lifter for 55-gallon
steel, fiber or plastic drum.
92 series drum lifters
MODEL 92 is made of carbon steel
92 series drum lifters
MODEL 92-SS is made of type 304
stainless steel.
MODEL 92-30 handles drum with 15"
to 23" (38.1 to 58.4 cm) diameter.
MODEL 92-5 is sized for a 5-gallon
pail with 11" to 15" diameter, and has
300 Lb. capacity.
NOTE: Bottom of the drum rim must
be within 1" of the top of the drum.
Weight of drum contents must not
exceed drum manufacturer's packing
limit. Drum lid must be properly
secured.
Guide the drum lifter into position
on the drum top. Then the self-adjusting tong-like action works to lift a rimmed steel, plastic or fiber drum.
Model 92 drum lifter shown lifting a
55-gallon plastic drum
92 series drum lifters 92 series drum lifters
Drum lifter model 92-SS is made of type
304 stainless steel.
Model 92-30 drum lifter is used for a 30-gallon
rimmed steel, fiber or plastic drum.
drum lifters dimensions

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

SERIES 90, 91 & 92 DRUM LIFTERS PRICES
Model No.
Description
Weight
Price
For 55-gallon steel drum
50 lbs
$322
90-M
Spark resistant, for 55-gallon steel drum
53 lbs
Contact Us
Stainless steel, for 55-gallon steel drum
50 lbs
$1,152
For 30-gallon steel drum
45 lbs
$374
For 85-gallon steel salvage drum
59 lbs
$538
For 55-gallon or 85-gallon drum
19 lbs
$178
For 18" to 26" diameter rimmed drum
25 lbs
$262
92-M
Spark resistant, for 18" to 26" dia. rimmed
27 lbs
Contact Us
Stainless steel for 18" to 26" dia. rimmed
25 lbs
$567
For 15"-23" diameter rimmed drum
24 lbs
$281
Type 304 stainless steel, for 15"- 23" diameter rimmed drum
28 lbs
$608
Move & Place Drums, Morse Verti-Karriers, Drum Grabs, Drum Handlers, Drum Handling, Drum Lifters, Barrel Handling,
Drum Carriers, Drum Dumpers, Drum Handling Equipment, Drum Lift, Drum Lifting Equipment, and Drum Stackers from
your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart