Belt Conveyors, Conveyor, Conveyor Belt, Horizontal Belt Conveyor, Conveyors

ENGINEERED STEEL PRODUCTS

Priced Full Line Products Catalog

20 Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679

Back to Product Category

MODEL TL
HEAVY DUTY HORIZONTAL BELT CONVEYOR


		The Model TL with its rugged, heavy-duty construction is ideally used for long assembly line operations, inspections, testing, sorting, and packing. Can be floor-supported or ceiling-hung.

		6 Belt Widths Reversible (with center drive) Rugged Construction Adjustable MS-Type Floor Supports Available



STANDARD SPECIFICATIONS
BELT – Ultimate 140 BBS - Nitrile.		SNUB IDLER – Adjustable 2-1/8 in. dia. for tail end 2-1/2 in. dia. for drive end. Pre-lubricated ball bearings. Guards included.

BED – 6-5/8 in. deep x 12 ga. formed steel slider bed powder painted. Reinforced with 3/4 in. pipe which forms sockets for guard rails. Standard 5 ft. & 10 ft. long sections bolt together with splice plates. 48 in. and 51 in. bed widths are available in 5 ft. lengths only.

		RETURN IDLER – Adjustable 1.9 in. dia. pre- lubricated ball bearings.

		TAKE-UP – Take-ups at tail pulley. Provides 4 in. of belt take-up.

END DRIVE – Located on discharge end of conveyor, chain guard on left hand side.
		BEARINGS – Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys.

DRIVE PULLEY – 8 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned and fully lagged.
		SPEED REDUCTION – Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.

TAIL PULLEY – 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.
		MOTOR – 1 HP – 208/230/460/575V – 3 Ph. – 60 Hz. Totally Enclosed Fan Cooled C-Face.

BELT SPEED – Constant 65 FPM.

		FLOOR SUPPORTS – Now supplied as optional equipment.

CAPACITY – Maximum load per linear foot of conveyor 100 lbs. NOT TO EXCEED capacity in charts.

8" DIA DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY @ 65 FPM
HP	BELT WIDTHS TO	LENGTHS UP TO
		52'	102'
		DISTRIBUTED LOAD (LBS.)
1	24" - 30"	530	350
	36" - 42"	450	250
	48" - 52"	360	100
2	24" - 30"	1250	1100
	36" - 42"	1200	950
	48" - 52"	1100	850


OPTIONAL EQUIPMENT

FLOOR SUPPORTS - MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.		LOWER POWERED FEEDER* – Chain type driven from tail pulley of inclined conveyor. Under- side take-up required when end drive is used. MS Type floor supports now supplied as optional equipment. 8 in. dia. drive recommended on conveyor when feeder exceeds 44-1/2 in. OAL–50-1/2 in. OAL with system end.

BELT* - White Polymate 100 RMP-COS (cover one side), Black Trackmate 120 Roughtop with PVC cover, Brown Polymate Roughtop w/Nitrile cover, Black Trackmate 533 COS-PVC, Tan Glidetop, Pure Gum Rubber Roughtop.

		BUTT COUPLINGS – Provides connection to SB, RB, LR, ACC, ACZ, ABEZ, 190- NSP, 190-NSPEZ, 20-CR, 1.9 in. & 2.0 in. gravity conveyors. Includes 1 in. dia. pop out roller. Center drive or underside take-up recommended.

BELT SPEED* - Other constant and variable speeds. V-belt drive supplied on speeds under 17 FPM.

		SYSTEM END ROLLER – 12 in. long tail sections provide connection to: SB, RB, LR, ACC, ACZ, ABEZ, 190 NSP, 190-NSPEZ, 1.9 in. & 2.0 in. gravity con- veyors. Includes 1.9 in. dia. pop-out transfer roller. Belt width is 6 in. less than bed width. Center drive or under- side take-up required.

OVERHEAD END DRIVE - Motor-reducer unit mounted 9-1/2 in. above belt. Other clearances available, specify. (Chain guard right hand side). Minimum elevation 10 in.

SIDE MOUNTED END DRIVE - Motor-reducer unit mounted left hand side of conveyor. Minimum elevation 10 in.

		GUARD RAILS – Adjustable Universal Channel Guard Rail, solid side guards, PC side guards with formed top.. Fixed Channel overlapping, one direction (use with systems ends only). Fixed Channel non- overlapping, reversing (use with system ends only).

CENTER DRIVE - Provides 16 in. of belt take-up. Minimum elevation 20 in. Specify location. Minimum OAL 66 in.

		CASTERS – See below for options. POLY-TIER SUPPORTS – 36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.

LOW ELEVATION SIDE MOUNTED CENTER DRIVE - Motor-reducer unit mounted to side of con- veyor. Minimum elevation 16-1/2 in.

		CEILING HANGERS – 5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and gal- vanized rods available.

STACKED END DRIVE - Contact factory for mini- mum elevations.

V-BELT DRIVE - V-Belt supplied between motor and reducer. Minimum overall drive width 14 in.

		MOTORS – Energy effi cient, single phase, brake- motor, other characteristics. 2 HP maximum.

O-RING DRIVE CHAIN - With sealed in lubricant (Recommended for applications that do not permit regular lubrication). Allow 65 in.

		ELECTRICAL CONTROLS – One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations. AC variable frequency drive. *NOTE: Capacity affected with these options.

UNDERSIDE TAKE-UP - Provides 16 in. of belt take-up. Extends down 15-3/4 in. from top of belt.

NOSEOVER* - Adjustable, single (0° to 15°), double (0° to 30°).


PRICES FOR COMPLETE CONVEYOR INCLUDE:
• End Drive, Located on Discharge End of Conveyor, Chain Guard on Left Hand Side When Standing at Infeed Looking Toward Discharge • Black Ultimate 140 BBS Belt • 6-5/8” Deep x 12 Ga. Slider Bed • “C” Face Speed Reducer–Sealed Worm Gear		• 1 HP–“C” Face Totally Enclosed Motor (Specify Exact Voltage) • Totally Enclosed Chain Guard • 65 FPM Belt Speed • Less Electrical Controls • Less Floor Supports


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

*Overall Length "A" 6" Dia. Tail Pulley	Bed Length "L"	Overall Length "A" Center Drive	Black Ulimate 140 BBS
			Belt Widths
			24"	30"	36"	42"	48"	52"
			12 Ga. Steel Bed Widths
			30"	36"	42"	*48"	*54"	*58"
7'-1"	5'	6'-4"	$4,904	N/A	N/A	N/A	N/A	N/A
12'-1"	10'	11'-4"	$5,609	$6,445	$6,819	$7,447	$7,888	$8,367
17'-1"	15'	16'-4"	$6,315	$7,269	$7,767	$8,694	$9,368	$9,938
22'-1"	20'	21'-4"	$7,021	$8,094	$8,714	$9,941	$10,848	$11,508
27'-1"	25'	26'-4"	$7,726	$8,919	$9,661	$11,188	$12,328	$13,079
32'-1"	30'	31'-4"	$8,432	$9,744	$10,609	$12,434	$13,807	$14,650
37'-1"	35'	36'-4"	$9,138	$10,567	$11,557	$13,682	$15,287	$16,220
42'-1"	40'	41'-4"	$9,842	$11,392	$12,505	$14,928	$16,768	$17,791
47'-1"	45'	46'-4"	$10,548	$12,217	$13,453	$16,176	$18,247	$19,362
52'-1"	50'	51'-4"	$11,254	$13,041	$14,401	$17,423	$19,727	$20,932
57'-1"	55'	56'-4"	$11,959	$13,866	$15,348	$18,669	$21,207	$22,503
62'-1"	60'	61'-4"	$12,665	$14,691	$16,296	$19,917	$22,686	$24,074
67'-1"	65'	66'-4"	$13,370	$15,514	$17,244	$21,163	$24,167	$25,644
72'-1"	70'	71'-4"	$14,076	$16,339	$18,192	$22,411	$25,647	$27,215
77'-1"	75'	76'-4"	$14,782	$17,164	$19,140	$23,657	$27,126	$28,786
82'-1"	80'	81'-4"	$15,487	$17,989	$20,088	$24,904	$28,606	$30,356
87'-1"	85'	86'-4"	$16,193	$18,813	$21,036	$26,152	$30,085	$31,926
92'-1"	90'	91'-4"	$16,899	$19,638	$21,982	$27,398	$31,566	$33,496
97'-1"	95'	96'-4"	$17,603	$20,463	$22,930	$28,646	$33,046	$35,067
102'-1"	100'	101'-4"	$18,309	$21,286	$23,878	$29,892	$34,525	$36,638
Price Per Foot			$141.10	$164.90	$189.60	$249.50	$296.00	$314.20

*NOTE: 5’ Bed Sections Only, V-Belt Drive Required with Center Drive

IMPORTANT NOTES

• OTHER LENGTHS
Other lengths not listed in price chart are available. For “IN-BETWEEN SIZES”, use next larger Overall Length “A”
price.
• OTHER WIDTHS
For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 58” OAW, contact us.
• STANDARD WIDTHS
All standard widths to be offered in 1 FOOT length increments beginning at 7’-1” OAL - 2 weeks from factory.
(Excludes 54” and 58” Overall Bed Widths.)
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included. Available in 30", 36" and 42" OAW in 5 ft.
and 10 ft. bed lengths only. - 3 days.
• FLOOR SUPPORTS
FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE. There are two (2) stationary floor supports
required for the first bed section and one (1) support required per bed section thereafter.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

PRICES FOR OPTIONAL EQUIPMENT

OPTIONAL BELTS

Extra Price Per Foot Conveyor Length "A" (in addition
to Black Ultimate 140 BBS Belt regularly furnished).
See chart below.

BELT DESCRIPTION
BELT WIDTH	PRICES PER FOOT OF CONVEYOR LENGTH "A"
BELT WIDTH	Tan Glidetop	Polymate 100 RMP-COS (White)	Trackmate 533 COS- PVC (Black)	Trackmate 120 Roughtop with PVC cover (Black)	Polymate Roughtop Nitrile-COS (Brown)	Pure Gum Rubber Roughtop	High Grip Longitudinally Grooved Belt
24"	$98.57	$21.76	$3.22	$16.54	$68.60	$134.31	$16.54
30"	$122.66	$26.64	$4.66	$20.87	$86.03	$167.94	$20.87
36"	$147.30	$32.08	$5.33	$25.20	$100.57	$201.69	$25.20
42"	$171.83	$37.19	$5.88	$29.53	$117.22	$235.10	$29.53
48"	$196.25	$42.29	$6.99	$34.08	$137.97	$269.06	$34.08
52"	$211.34	$45.73	$6.99	$36.85	$151.40	$291.15	$36.85

DRIVE COMPONENT DEDUCTS

CONSTANT AND VARIABLE SPEEDS

Less Motor Drive, Motor Mount and Guards,
but with Shaft Extension.........Deduct ............

Constant C-Face–Within 17-135 FPM
.......... End Drive Only .............. No Charge
NOTE: When a 2 HP motor is required,
26 FPM is minimum speed, and a V-Belt
Drive is required. Constant V-Belt–
Minimum of 4 FPM
.......................... Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above
........................................... Contact us
Variable Speed .................................
See AC Variable Speed Drives

$777.20

Less Motor Only (1 HP-208/230/460/575V-3
Ph.-60 Hz.) .....................Deduct ............

$282.90

*Less Reducer ................Deduct ............

$307.40

*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.

OPTIONAL DRIVES

Unified Drives: (Shaft Mounted)

Unified Drives:	OVERALL FRAME WIDTH
Unified Drives:	30" to 42"	48"	54" to 58"
End Drive 8” Drive Pulley	$271	$271	$271
Center Drive 8” Drive Pulley with 075 Reducer	$1,538	$1,747	$1,747
Center Drive 8” Drive Pulley with 090 Reducer	$1,727	$1,936	$1,936

8” Drive Pulley

Speed FPM	65	78	97	130	156	195	260	389
Max HP	1	1.2*	1	2	2	2	2	2**

* Reducer size increases with 2 HP.
**Contact us.

OPTIONAL DRIVES

GUARD RAILS

DRIVE TYPE	BED WIDTHS
DRIVE TYPE	30" to 42"	48"	54" to 58"
End Drive (V-Belt)	$246.50	$246.50	$246.50
Side Mounted End (C-Face)	$482.20	$596.00	$596.00
Side Mounted End (V-Belt)	$728.40	$842.20	$842.20
Stacked End Drive (C-Face)**	$257.10	$298.00	$298.00
Stacked End Drive (V-Belt)**	$503.50	$544.20	$544.20
Center (C-Face)	$1,267.50	$1,476.40	$1,476.40
Center (V-Belt)	$1,513.70	$1,722.30	$1,722.30
Side Mounted Center (C-Face)	$1,749.10	$2,071.80	$2,071.80
Side Mounted Center (V-Belt)	$1,995.80	$2,317.90	$2,317.90
Center w/ Ext. Take-Up C-Face	$1,656.10	$1,768.00	$1,768.00
Center w/ Ext. Take-Up V-Belt	$1,902.50	$2,014.40	$2,014.40
High Perf. Center C-Face	$2,345.00	$2,861.90	$2,861.90
Heavy Duty Center C-Face	$1,407.30	$1,661.60	$1,661.60

NOTE: Available in 5’ and 10’ lengths only.
Contact us for other lengths.

Adjustable Universal Channel Guard Rail ...........

Both Sides .........per foot ............................
One Side ...........per foot ............................

$15.10

$7.80

HEIGHT (Both Sides-Per Foot)	TYPE
HEIGHT (Both Sides-Per Foot)	Solid Side	PC Style
2"	$31.40	N/A
3-1/2"	N/A	$37.10
4"	$32.30	N/A
6"	$34.60	$34.60
9"	$40.30	$40.30
12"	$44.80	$44.80

NOTE: Solid Side Guards mount vertically on outside
of conveyor bed.

#50 O-Ring Drive Chain..........Add ...............$284.40

CASTERS

#60 O-Ring Drive Chain..........Add ...............$406.00

	4" Dia.		6" Dia.
CASTERS	Steel	Rubber	Steel	Rubber
Extra Per Support*	$207.20	$207.20	$316.60	$316.60

** Contact us for minimum elevations.

UNDERSIDE TAKE-UP

Provides 16" of Belt Take-Up on Long Units. Required
on Incline Units with Powered Feeders and End Drives.

* Price Includes Knee Braces
NOTE: Casters for HS Supports, contact factory.
• CASTERS
Are available in either Rigid or Swivel type—Specify.
Brakes for Casters (Add-On Per Support)*:
4” Dia. Caster ...............................................$39.20

BED WIDTHS	PRICE
30"	$891.10
36"	$891.10
42"	$891.10
48"	$1,858.90
54" to 58"	$2,191.70

6” Dia. Caster ...............................................$125.20

FILLER PLATES

For Solid Side Guards (NOT AVAILABLE
on 2" High Guards)...per joint.......................

$72.30

MOTORS

Extra Motor Price for OTHER THAN: 1 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects
horsepower requirements.

H.P. REQ.	ENERGY EFFICIENT	TOTALLY ENCLOSED	BRAKEMOTORS
H.P. REQ.	200/208/230/ 460/575V 3 Ph.-60 Hz.	115/230V 1 Ph.-60 Hz.	Holding Brake 208/230/ 460/575V 3 Ph.-60Hz.	Cycling Brake 208/230/ 460/*575V 3 Ph.-60Hz..	Cycling Brake 208/ 230/460/*575V 3 Ph.-60Hz.	Holding Brake 115/230V 1 Ph.-60Hz.
1	N/C	$83.60	$1,051.40	$1,891.10	$3,648.50	$879.50
2	$936.80	$1,142.20	$1,639.70	$2,421.60	$3,900.00	$3,154.60

*575V - Prices coded in light blue call for lead time.

  * Note: "High Cycle Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices
     Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs.
** Note: "High Cycle Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and
    Timing Belt Drive.
    Note: SSB and D Series are Holding Brakes and are NOT rated for cycling.

POWERED FEEDER

Prices for Powered Feeder Include: Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys
NOTE:Adjustable Floor Supports Not Included In Base Price
NOTE: (2) Adjustable Floor Supports Required. Gravity Conveyor Bracket with “Pop-Out” Roller on Tail End
(24” Wide Belt Only)
NOTE: NO DEDUCT for Feeders less than minimum lengths. Shorter lengths COULD CAUSE IMPROPER
BELT TRACKING.
NOTE: With System End Roller Assembly Add 4” to OAL.
Underside Take-Up required on Incline Units with Power Feeders and End Drives.

CHAIN DRIVEN TYPE
BELT WIDTHS	24"	30"	36"	42"	48"	52"
Min. Length Overall	63-1/2"	75-1/2"	87-1/2"	105-1/2"	120-1/2"	120-1/2"
Price	$2,829.70	$3,447.30	$4,021.00	$4,595.40	$5,172.40	$5,584.60
Price Per Foot	$167.90	$207.30	$224.60	$254.60	$287.40	$295.90

#50 O-Ring Chain on Slave Connection. ........... Add ....................$203.50

#60 O-Ring Chain on Slave Connection ............ Add ................... $271.00


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

FLOOR SUPPORTS

COUPLING HARDWARE

Not Included in Base Price. Use Chart Below for
Required Elevation.

*Gravity Conveyor Bracket with Pop-Out
Roller...per end.........................................

$87.10

*Butt Couplings with Pop-Out Roller..........
..........per end...........................................

"MS" INTERMEDIATE & TAIL SUPPORT
Model No.	Adjustment to Top of Belt	Price Each
*MSL-2	10" to 11-1/2"	$58.40
*MSL-3	11-1/2" to 14-1/8"	$58.40
*MS-1	13-3/4" to 15-1/2"	$58.40
*MS-1.2	14-3/4" to 16-1/2"	$58.40
*MS-1.4	15-3/4" to 17-1/2"	$58.40
*MS-2	16-3/4" to 19-3/4"	$60.40
*MS-3	19-3/8" to 22-3/8"	$66.40
MS-4	22-3/8" to 28-3/8"	$76.40
MS-5	26-3/8" to 32-3/8"	$79.80
MS-6	30-3/8" to 42-3/8"	$88.10
MS-7	40-3/8" to 52-3/8"	$130.20
MS-8	52-3/8" to 64-3/8"	$148.50
MS-9	64-3/8" to 76-3/8"	$162.80
MS-10	76-3/8" to 88-3/8"	$185.60
MS-11	86-3/8" to 98-3/8"	$205.20
MS-12	98-3/8" to 110-3/8"	$214.60

$81.00

**System End Roller Assembly**............
..........per end...........................................

$223.10

* 24" Wide Belt Only.
**Note: Center drive required if nose rollers used on each end

Tail Pulley - 2 1/4” Dia ..............................
.................. per end ...................................... $211.30

*Through 24” Wide Belt Only.
**NOTE: When System End is supplied on both ends, Center
Drive is required. See “Optional Drive Chart” for Center Drive
Price.

ELECTRICAL CONTROLS

(See bottom of page)

GALVANIZING

Contact us.

UNDERTRUSSING (MAX. 30" OAW)

Undertrussing Kit Assembly (A)....Each..........$281.60
Undertrussing Kit Assembly (B)....Each..........$281.60
Undertrussing Kit Assembly (C)....Each..........$281.60
NOTE: Specify quantity each.
NOTE: Undertrussing not recommended for
units over 40' bed lengths; floor supports requires.

"MSD" DRIVE SUPPORT
Model No.	Adjustment to Top of Belt	Price Each
*MSD-0-10	10" to 10"	$58.40
*MSD-0-11	11" to 11"	$58.40
*MSD-0-12	12" to 12"	$58.40
*MSD-0-13	13" to 13"	$58.40
*MSD-0-14	14" to 14"	$58.40
*MSD-0-15	15" to 15"	$58.40
*MSD-0-16	16" to 16"	$58.40
MSD-1	16-9/16" to 18-5/16"	$58.40
MSD-1.2	17-9/16" to 19-5/16"	$58.40
MDS-1.4	18-9/16" to 20-5/16"	$58.40
MSD-2	19-9/16" to 22-5/16"	$60.40
MSD-3	22-1/16" to 25-1/16"	$66.40
MSD-4	25-1/16" to 31-1/16"	$76.40
MSD-5	29-1/16" to 35-1/16"	$79.80
MSD-6	33-1/16" to 45-1/16"	$88.10
MSD-7	43-1/16" to 55-1/16"	$130.20
MSD-8	55-1/16" to 67-1/16"	$148.50
MSD-9	67-1/16" to 79-1/16"	$162.80
MSD-10	79-1/16" to 91-1/16"	$185.60
MSD-11	89-1/16" to 101-1/16"	$205.20
MSD-12	101-1/16" to 113/1/16"	$214.60

TROUGHING ATTACHMENT

Price Per Foot of Conveyor..... Both Sides.......$40.10

TROUGHING ATTACHMENTS WITH
HUGGING STRIPS
Requires 6” High Sides Minimum.

Not to be used with rough top, high grip longtitudinal
grooved or cover one side belts................
Both Sides per Foot.........................................$64.50

NOSEOVER

Adjustable type. Support not included in base
price. DOES NOT include bed length.
Single ...............(0° to 15°) .......................$341.40
Double ..............(0° to 30°) ......................$482.20
NOTE: Brakemotor required on Incline or Decline
Units greater than 10°.

Knee Braces...per pair.........................................

$30.00

NOTE: MS-7 to MS-12 and MSD-7 to MSD-12:
Knee Braces included in price.

  *Less than 19-1/2" top of belt elevation-
    Side Mount Drive Required.
    NOTE: Knee Braces are required on incline or
    decline units with MS-3 or higher supports.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

CEILING HANGERS
	Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated fully threaded rods ......................................................................
		$147.90
	Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized fully threaded rods .......................................................................
		$176.60
	Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long unplated fully threaded rods................................................................................
		$218.40
	Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long galvanized fully threaded rods.................................................................................
		$359.60
	Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long unplated fully threaded rods.................................................................................

		$362.60
	Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long galvanized fully threaded rods..................................................................................
		$419.40
	Ceiling Hanger Brackets, Less Rods Only ....................................	$93.10
	Extra Length Rods:
	(2) 8’-0” long x 5/8” dia. unplated fully threaded rods ..................	$54.20
	(2) 8’-0” long x 5/8” dia. galvanized fully threaded rods ...............	$83.40
	(2) 10’-0” long x 5/8” dia. unplated fully threaded rods ................	$125.20
	(2) 10’-0” long x 5/8” dia. galvanized fully threaded rods .............	$266.30
	(2) 12’-0” long x 5/8” dia. unplated fully threaded rods ................	$269.60
	(2) 12’-0” long x 5/8” dia. galvanized fully threaded rods .............	$326.50
	Hex Coupling Nuts for Rods .........................................................	$4.90
	Above noted delivery times determined by delivery time of model ordered.

POLY-TIER SUPPORTS

PRICES FOR COMPLETE
SUPPORT INCLUDE:

IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.

• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only

CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs

(2) TIER POLY-TIER SUPPORTS
36"	$311.36
42"	$320.01
48"	$328.56
54"	$337.00
60"	$345.65
66"	$354.42
72"	$362.86
78"	$371.52
84"	$380.00
90"	$388.50
96"	$397.27
102"	$405.93
108"	$414.60
114"	$423.69
120"	$431.46

(3) TIER POLY-TIER SUPPORTS
36"	$439.01
42"	$447.80
48"	$456.30
54"	$464.80
60"	$473.42
66"	$482.18
72"	$490.62
78"	$499.30
84"	$507.80
90"	$516.40
96"	$524.90
102"	$533.60
108"	$542.46
114"	$550.45
120"	$559.00


				Order Online, by Phone, or by E-Mail
				~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION

MANUAL START SWITCH or
SAFETY DISCONNECT

LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER

#032.1014.........................................

$213.01

#033.2032 & #033.2072..................$555.67
Nema 4

"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)

LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER

#033.2033& #033.2072...................$332.11
Nema 4

REVERSING DRUM SWITCH

#032.103..........................................

$854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase

PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range

FOOT SWITCH WITH GUARD

#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range

#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.

PHOTO EYE, ON-OFF TYPE

#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC

POWER CORD AND PLUG (20')

POWER CORD WITH PLUG ONLY 20' LONG
Model No.	Voltage	HP Rating	Prices
EA-039-1A	115/1	1/2-3/4	$106.67
EA-039-2A	115/1	1	$106.67
EA-039-3A	115/1	1 1/2	$155.18
EA-039-4A	230/1	1/2-1	$106.67
EA-039-5A	230/1	1 1/2-2	$109.67
EA-039-6A	208-230/3	1/2-2	$178.60
EA-039-7A	460/3	1/2-2	$178.60

POWER CORD WITH PLUG 20' LONG WITH MANUA
Model No.	Voltage	HP Rating	Prices
EA-039-1B	115/1	1/2-3/4	$173.16
EA-039-2B	115/1	1	$330.67
EA-039-3B	115/1	1 1/2	$377.96
EA-039-4B	230/1	1/2-1	$293.04
EA-039-5B	230/1	1 1/2-2	$330.67
EA-039-6B	208-230/3	1/2-2	$362.97
EA-039-7B	460/3	1/2-2	$362.97

MOUNTING BRACKETS FOR PHOTO
EYE #033.2122

B-05165...........................................$118.10

AIR PRESSURE SWITCH

#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH

#032.285 with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4

"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE

#032.281...one side.................$7.44 per / ft.
both sides..............$15.87per / ft.

EMERGENCY PUSH BUTTON

#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE

#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48

NOTE: PRICING LISTED NOT MOUNTED
OR WIRED

"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC

#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

CONTROLLER PRICES

AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size	115 Volt		208/230 Volt
1/2	VSC-12-10		VSC-12-12
Price	$1,491.84		$1,189.37
1	VSC-12-11		VSC-12-13
Price	$1,724.27		$1,391.05
2	N/A		VSC-12-14
Price	~		$1,794.20
THREE PHASE CONTROLLER INPUT
Motor Size	208/230 Volt	460 Volt	575 Volt
1/2	VSC-01-15	VSC-01-18	VSC-12-29
Price	$1,564.99	$1,656.34	$2,155.73
1	VSC-01-16	VSC-01-19	VSC-12-29
Price	$1,579.75	$1,794.20	$2,155.73
2	VSC-01-17	VSC01--20	VSC-12-30
Price	$1,978.69	$2,070.37	$2,663.45

REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS

HP	Part No.	Price
1/2	032.351 230/460	$618.71
1	032.353 230/460	$705.52
2	032.355 230/460	$797.31
1/2	032.3512 575	$1,449.11
1	032.3532 575	$1,611.17
2	032.3552 575	$1,897.10

IMPORTANT NOTES...

• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.

OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)

$675.20

• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.)

Brake Relay Kit (EA-068A)..............................

$542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE

Part No.	Description	Price
EA-VSC-01-CB	2 HP Electronic Clutch-Brake Kit	$5,058.00

OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)

$675.20

KIT INCLUDES

Part No.	Description
VSC-01-20	AC Variable Speed Controller, 460 Volt, 3 Phase
032.345	2 HP 460 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets

IMPORTANT NOTES

• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets

Part No.	Description
VSC-01-17	AC Variable Speed Controller, 230 Volt, 3 Phase
032.345	2 HP 230 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)

An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.

THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	MOTOR DUTY	NON-REVERSING					REVERSING
H.P.	MOTOR DUTY	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE
1/2	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B25	EN-46B16	EN-57B10	$1516.60	ER-20B40	ER-23B25	ER-46B16	ER-57B10	$2,023.30
			EN-23B25	EN-46B16				ER-23B25	ER-46B16
			EN-23B16	EN-46B10				ER-23B16	ER-46B10
1	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B40	EN-46B25	EN-57B16		ER-20B40	ER-23B40	ER-46B25	ER-57B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
1-1/2	GEARMOTORS	EN-20C10	EN-23B63	EN-46B40	EN-57B25		ER-20C10	ER-23B63	ER-46B40	ER-57B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
2	STANDARD EASY CLEAN ENERG. EFF.	EN-20C10	EN-23C10	EN-46B40	EN-57B40		ER-20C10	ER-23C10	ER-46B40	ER-57B40
			EN-23C10	EN-46B40				ER-23C10	ER-46B40
			EN-23B63	EN-46B40				ER-23B63	ER-46B40

SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	NON-REVERSING		REVERSING		NON-REVERSING		REVERSING
	115 VOLT	PRICE	115 VOLT	PRICE	230 VOLT	PRICE	230 VOLT	PRICE
1/2	EN-1SC10	$1,182.40	ER-1SC10	$2,023.30	EN-2SB63	$1,435.60	ER-2SB63	$2,023.30
1	EN-1SC16		ER-1SC16		EN-2SC10		ER-2SC10
1-1/2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10
2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10


• Manual Start-Stop Switch Kit			• Start-Stop Push Button Kit, Remote Mounted
	EA-000001 ......................................	$242.09		EA-000002.......................................	$242.09
	Includes: 032.1014 Manual Start Switch, Nema 1, B-21467 Mounting Bracket with Mounting Hardware			Includes: 033.1955 Push Button Station, One Direction, Nema1, B-21467 Mounting Bracket with Mounting Hardware

• Forward-Reverse-Stop Push Button Kit, Remote Mounted

			• Up-Down-Stop Push Button Kit, Remote Mounted
	EA-000003.......................................	$440.67	• Up-Down-Stop Push Button Kit, Remote Mounted
	Includes: 033.1965 Push Button Station, Reversing, Nema1, B-21467 Mounting Bracket with Mounting Hardware			EA-000004.......................................	$440.67
				Includes: 033.1975 Up Down Stop Push Button Station, Reversing, Nema 1, B-21467 Mounting Bracket with Mounting Hardware


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station				• “Start-Stop”Push-button Station
033.1955			$211.23		033.195.................................................	$142.50
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Fwd-Rev-Stop” Push-button Station				• “Fwd-Rev-Stop”Push Button Station
033.1965			$397.05		033.196..................................................	$490.95
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Up-Down-Stop” Push-button Station				OPTIONAL STARTER CONTROLS
033.1975			$397.05	OPTIONAL STARTER CONTROLS
033.1975			$397.05	• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1				• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1					EA-011 ............................................ Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), and a Control Circuit Transformer (As Required), & Pushbutton Station (033.195).	$3,210.68
						$3,210.68

IMPORTANT NOTES
• Control Circuit Transformer Included for 115 Volt Control Voltage. • Above starters are in Nema 3, 4 and 12 Enclosures. • The starters included Safety Disconnect, Overload Relay, and Aux. Contacts as required. • IF AN ORDER IS SUPPLIED LESS MOTOR, AND IS SUPPLYING ANY ELECTRICAL CONTROLS, THEN MOTOR HP, VOLTAGE, PHASE, AND FULL LOAD CURRENT MUST BE STATED ON THE ORDER. • PRICING LISTED IS NOT MOUNTED OR WIRED.

				• Auto Restart Control, 1 Phase, Non-Reversing
					EA-012 (115 Volt) ........................... EA-017 (230 Volt) ........................... Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), Pushbutton Station (033.195), and (230 V. Only) a Control Circuit Transformer (As Required). Note: Above Price does NOT include Photo Eye Mounting Bracket.	$3,253.63
						$3,391.27

• Add on	$192.70	for the above Push Buttons
to be Mounted.
• Add on	$995.10	for the above Starters and
Push Button Stations to be Mounted and Wired. Supply 20'0" of cable for push button only.

				• Mounting Brackets for photo eye
				• Mounting Brackets for photo eye
					#033.2122 B-05165 ..............................................
						$118.10

CONVEYOR WEIGHT TABLE

SIZE TO ORDER Overall Length "A" 6" Dia. Tail Pulley	Bed Length "L"	Overall Length with Center Drive	Belt Width	24"	30"	36"	42"	48"	52"
SIZE TO ORDER Overall Length "A" 6" Dia. Tail Pulley	Bed Length "L"	Overall Length with Center Drive	Bed Width	30"	36"	42"	48"*	54"*	58"*
7'-1"	5'	6'-4"	WEIGHTS (Lbs.)	375	N/A	N/A	N/A	N/A	N/A
12'-1"	10'	11'-4"		475	555	615	888	974	1060
17'-1"	15'	16'-4"		625	686	752	1084	1191	1298
22'-1"	20'	21'-4"		725	796	867	1280	1408	1536
27'-1"	25'	26'-4"		875	967	1065	1476	1625	1774
32'-1"	30'	31'-4"		975	1077	1180	1672	1842	2012
37'-1"	35'	36'-4"		1125	1248	1377	1868	2059	2250
42'-1"	40'	41'-4"		1225	1358	1492	2064	2276	2488
47'-1"	45'	46'-4"		1375	1529	1690	2260	2493	2726
52'-1"	50'	51'-4"		1475	1639	1805	2456	2710	2964
57'-1"	55'	56'-4"		1625	1810	2002	2652	2927	3202
62'-1"	60'	61'-4"		1725	1920	2117	2848	3144	3440
67'-1"	65'	66'-4"		1875	2091	2315	3044	3361	3678
72'-1"	70'	71'-4"		1975	2201	2430	3240	3578	3916
77'-1"	75'	76'-4"		2125	2372	2627	3436	3795	4154
82'-1"	80'	81'-4"		2225	2482	2742	3632	4012	4392
87'-1"	85'	86'-4"		2375	2653	2940	3828	4229	4630
92'-1"	90'	91'-4"		2479	2763	3055	4024	4446	4868
97'-1"	95'	96'-4"		2625	2934	3252	4220	4663	5106
102'-1"	100'	101'-4"		2725	3044	3367	4416	4880	5334

All weights are conveyor weights only. Accessories, crating, etc., are not included.
*5'-0" Bed, V-Belt Drive Only.

Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors, and Slider Bed from your source for material handling
equipment.

Back to Product Category

Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart

MODEL TL

HEAVY DUTY HORIZONTAL BELT CONVEYOR

Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors, and Slider Bed from your source for material handling equipment.

HEAVY DUTY HORIZONTAL
BELT CONVEYOR

Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors, and Slider Bed from your source for material handling
equipment.