 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
MODEL
ABLR
|
HORIZONTAL
POWER CONVEYOR
(LIVE ROLLER)
|
 |
|
|
|
|
|
The
Model ABLR is a horizontal belt driven live
roller conveyor, designed to transport medium to
heavy cartons. Applications vary from manu-
facturing to distribution operations |
|
|
|
|
|
|
•
11 Bed Widths
• Center Drive
• Reversible
• Adjustable MS-Type Floor
Supports Available |
|
|
|
|
|
|
 |
|
STANDARD
SPECIFICATIONS |
|
|
|
| BELT - 6 in. Black Ultimate 140 SD. |
|
SNUB
IDLER – Adjustable 2 1/8 in. dia. pre-lubricated
ball bearings. |
|
|
BED – Roller bed with 1.9 in. dia. roller x 16 ga. gal-
vanized tube spaced every 3 in. Mounted in 6 1/2
in. x 12 ga. powder painted formed steel channel frame
bolted together with butt coupling. |
|
|
|
|
RETURN IDLER –
Adjustable 1.9 in. dia. pre-
lubricated ball bearings |
|
|
|
TAKE-UP – Take-ups in center drive. Provides 16 in.
of belt take-up. |
|
|
CROSS
BRACING – Rods with turnbuckle are fastened
to underside of bed to provide proper alignment of bed
rollers and insure correct product tracking. Supplied on
every other section 30 ft. bed lengths and over |
|
|
|
|
BEARINGS – Sealed, pre-lubricated, self-aligning,
ball bearings on drive and tail pulleys. Prelubricated
ball bearings in tread and pressure rollers. |
|
|
|
|
|
CENTER
DRIVE – Can be placed in any section of
conveyor 7’-6” or longer. Center drive is 18 in. OAW
on all widths. |
|
SPEED REDUCTION – Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive shaft. |
|
|
|
MOTOR – 1/2 HP–208/230/460/575V–3 Ph. 60 Hz.
Totally Enclosed C-Face. |
|
|
DRIVE
PULLEY – 8 in. dia. with 1 7/16 in. dia. shaft
at bearings. |
|
|
|
|
CONVEYING SPEED – Constant 65 FPM. |
|
|
|
|
|
|
|
CAPACITY – Maximum load per linear foot of
conveyor 150 lbs. Total load NOT TO EXCEED
capacity in charts. |
TAIL
PULLEY – 4 in. dia. with 1 7/16 in. dia. shaft at
bearings, machine crowned. |
|
|
|
TAKE-UP
PULLEY – 6 in. dia. with 1 3/16 in. dia.
shaft at bearings, machine crowned. |
|
|
|
|
FLOOR
SUPPORTS – Now supplied as optional
equipment. |
|
|
|
|
|
LOAD CAPACITY
CHART @65 FPM |
|
OVERALL FRAME WIDTH |
OVERALL FRAME WIDTH |
OVERALL FRAME WIDTH |
18" TO 22" |
24" TO 30" |
34" TO 42" |
HP |
TOTAL LOAD (LBS.) |
TOTAL LOAD (LBS.) |
TOTAL LOAD (LBS.) |
| UP TO 50' |
UP TO 100' |
UP TO 50' |
UP TO 100' |
UP TO 50' |
UP TO 100' |
1/2 |
550 |
100 |
300 |
- |
- |
- |
1 |
1650 |
1200 |
1400 |
800 |
1100 |
- |
2 |
3500 |
3000 |
3200 |
2600 |
2900 |
1650 |
|
|
|
|
OPTIONAL
EQUIPMENT |
|
|
|
FLOOR
SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify
top of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet for
lagging to floor. Knee braces recommended above
MS-6 support. |
|
O-RING DRIVE
CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
GUARD
RAILS–Adjustable Universal Channel Guard
Rail. See Accessory section. NOTE: If product comes
into contact with Guard Rails, product flow will be
affected. Fixed channel overlapping-one direction. |
|
|
CONVEYING
SPEED–Other constant and variable
speeds. FPM. V-belt drive supplied under 17 FPM.
Note: Capacity affected with speed change. |
|
|
|
|
PACKAGE STOPS–Angle
and raised roller end stops |
|
|
|
POLY-TIER
SUPPORTS–36 in. to 120 in. support
heights in 6 in. increments. Knee braces required. |
|
|
HIGH
PERFORMANCE UNDERSIDE CENTER DRIVE–Required on units over 100 ft
long, maximim
length 200’-0” (used with 2 HP, 3 HP or 5 HP motor
and reducers). |
|
|
|
|
CEILING
HANGERS–5/8 in. dia. x 8 ft. long unplated
steel rods fully threaded. Other lengths and galvanized
rods available |
|
|
SIDE
MOUNTED LOW ELEVATION CENTER DRIVE–Motor reducer unit mounted to
side of conveyor.
Minimum low elevation16 in. |
|
|
|
|
MOTORS–Energy
efficient, single phase, other characteristics. 2 HP maximum. |
|
|
|
ELECTRICAL
MOTOR CONTROLS–Non-
reversing magnetic starters and push-button stations.
AC variable frequency drive |
|
|
V-BELT
DRIVE–V-Belt supplied between motor and
reducer. Allow 65 in. |
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
• 1.9” Dia. x 16
Ga. Galvanized Roller (Rollers on 3”
Centers) in a 6 1/2” x 12 Ga. Channel Frame |
|
• Totally Enclosed Chain
Guard |
|
• 65 FPM |
| • Black Ultimate 140
SD Belt |
|
• End Guards |
| • “C” Face
Speed Reducer–Sealed Worm Gear |
|
• Less Motor Controls |
• 1/2 HP–“C”
Face Totally Enclosed Motor (Specify
ExactVoltage) |
|
• Less
Floor Supports |
|
|
|
| Between Rail Width |
15" |
21" |
27" |
33" |
39" |
| Overall Frame Width |
18" |
24" |
30" |
36" |
42" |
| 3"
Centers 10' Length-O.A. |
|
|
|
|
|
| Price Per Foot |
|
|
|
|
|
| 2"
Centers 10' Length-O.A. |
|
|
|
|
|
| Price Per Foot |
|
|
|
|
|
|
|
|
|
|
|
|
| IMPORTANT
NOTES |
|
| |
•
FLOOR SUPPORTS |
|
| |
Floor
Supports are not included in base price. There are two (2) stationary floor
supports
required for the first bed section and one (1) support per bed section thereafter. |
|
| •
OTHER LENGTHS |
|
| |
For
lengths longer than 10’-0” add per foot price of
width x additional length to base price. |
|
| |
NOTE:
Lengths over 100’ OAL, high performance |
•
OTHER WIDTHS |
|
| |
center drive required. |
|
For
“IN-BETWEEN WIDTHS”, use next width plus
10%. For widths above 42” OAW and up to 63”
OAW, interpolate plus 10%. For widths above 62”
OAW, contact factory for lead time. All non-standard
widths, contact factory for lead time. |
|
| |
|
|
|
OPTIONAL
DRIVES |
| Unified
Drives: (Shaft Mounted) |
| Unified Drives: |
16" to 28" |
30" to 42" |
| Center Drive 8” Drive Pulley with 075 Reducer |
|
|
| Center Drive 8” Drive Pulley with 090 Reducer |
|
|
|
|
| Speed FPM |
65 |
78 |
97 |
130 |
156 |
195 |
260 |
389 |
| Max HP |
1 |
1,2* |
1 |
2 |
2 |
2 |
2 |
2** |
|
|
* Reducer
size increases with 2 HP.
**Contact us. |
|
|
| 8”
Drive Pulley |
|
|
|
|
|
|
| Drive Type |
OVERALL FRAME WIDTH |
| 16" to 28" |
30" to 42" |
| Center Drive (V-Belt) |
|
|
| Low Elevation Side Mounted Center Drive C-Face |
|
|
| Low Elevation Side Mounted Center Drive V-Belt |
|
|
| Center Drive with Extended Take-Up C-Face |
|
|
| Center Drive with Extended Take-Up V-Belt |
|
|
| High Performance Center Drive (C-Face) |
|
|
| High Performance HD Center Drive (C-Face) |
|
|
|
| #50
O-Ring Drive Chain ..........Add ....... |
$284.40 |
|
|
| #60
O-Ring Drive Chain ..........Add ....... |
$406.00 |
|
|
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
| MOTORS |
|
Extra
Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60
Hz.–Totally Enclosed. Speed affects
horsepower requirements. |
H.P.
REQ. |
TOTALLY
ENCLOSED |
ENERGY
EFFICEINT |
200/208/
230/460/575V
3 Ph.-60 Hz. |
115/230V
1 Ph.-60 Hz. |
230/460V/575V
3 Ph.-60 Hz. |
| 1/2 |
|
|
|
| 1 |
N/A |
|
|
| 2 |
N/A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FLOOR
SUPPORTS |
|
|
|
|
|
|
|
|
|
CEILING HANGERS |
|
|
Not
Included in Base Price. Use Chart Below for
Required Elevation. |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"MS"
SUPPORT |
|
|
|
|
|
|
|
|
| Model No. |
Adjustment to Top of Roller |
Price Each |
| *MSL-1 |
8-3/4" to 9-3/4" |
|
| *MSL-2 |
9-3/4"
to 11-1/2" |
|
| *MSL-3 |
11-1/2"
to 14-1/8" |
|
| *MS-1 |
13-3/4"
to 15-1/2" |
|
| *MS-1.2 |
14-3/4"
to 16-1/2" |
|
| *MS-1.4 |
15-3/4"
to 17-1/2" |
|
| *MS-2 |
16-3/4"
to 19-3/4" |
|
| MS-3 |
19-3/8"
to 22-3/8" |
|
| MS-4 |
22-3/8"
to 28-3/8" |
|
| MS-5 |
26-3/8"
to 32-3/8" |
|
| MS-6 |
30-3/8"
to 42-3/8" |
|
| MS-7 |
40-3/8"
to 52-3/8" |
|
| MS-8 |
52-3/8"
to 64-3/8" |
|
| MS-9 |
64-3/8"
to 76-3/8" |
|
| MS-10 |
76-3/8"
to 88-3/8" |
|
| MS-11 |
86-3/8"
to 98-3/8" |
|
| MS-12 |
98-3/8"
to 110-3/8" |
|
|
|
|
|
|
|
|
|
|
|
|
Ceiling Hanger Brackets with
(2) 5/8” dia. x
8’-0” long unplated fully threaded rods...... |
|
|
|
|
$147.90 |
|
|
|
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
8’-0” long galvanized fully threaded rods.... |
|
|
|
|
$176.60 |
|
|
|
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
10’-0” long unplated fully threaded rods..... |
|
|
|
|
$218.40 |
|
|
|
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
10’-0” long galvanized fully threaded rods.... |
|
|
|
|
$359.60 |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
12’-0” long unplated fully threaded rods..... |
|
|
|
|
$362.60 |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
12’-0” long galvanized fully threaded rods.... |
|
|
|
|
$419.40 |
|
|
|
Ceiling
Hanger Brackets, Less Rods Only.... |
$93.10 |
|
|
|
Extra
Length Rods: |
|
|
|
|
(2)
8’-0” long x 5/8” dia. unplated fully
threaded rods ............................................ |
|
|
|
|
$54.20 |
|
|
|
(2)
8’-0” long x 5/8” dia. galvanized fully
threaded rods ............................................. |
|
|
*Less
than 19 1/2" top of roller elevation-Low Elevation
Side Mounted Center Drive Required (16" minimum
elevation). |
|
|
|
|
|
|
$83.40 |
|
|
|
(2)
10’-0” long x 5/8” dia. unplated fully
threaded rods .............................................. |
|
|
|
NOTE: MS-7 to MS-12: Knee Braces included
in price. |
|
|
|
|
|
|
|
|
$125.20 |
|
|
|
(2)
10’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................. |
|
|
Extra
Knee Braces ............. add per pair ...... |
$30.00 |
|
|
|
|
|
|
$266.30 |
|
|
|
|
|
|
|
|
|
|
|
|
(2)
12’-0” long x 5/8” dia. unplated fully
threaded rods .............................................. |
|
|
|
|
|
|
|
$269.60 |
|
|
|
|
|
|
(2)
12’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................. |
|
|
|
|
|
|
|
$326.50 |
|
|
|
|
|
|
Hex
Coupling Nuts for Rods ................... |
$4.90 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| POLY-TIER SUPPORTS |
 |
|
PRICES
FOR COMPLETE
SUPPORT INCLUDE: |
|
|
|
IMPORTANT
NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
•
Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
|
|
CAPACITY
DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
|
|
|
|
|
| GALVANIZING |
|
|
|
CONSTANT
AND VARIABLE SPEEDS |
|
Contact
us. |
|
|
|
Constant
C-Face--Within 17-120 FPM... |
No
Charge |
|
|
|
|
|
|
|
|
|
Constant
V-Belt--Minimum of 4 FPM.............. |
| ELECTRICAL
CONTROLS |
|
|
|
|
|
|
...........................................Use
V-Belt Drive Add-On |
|
(See
bottom of page) |
|
|
|
|
|
|
|
Constant
Speeds Below Those Listed Above...........
............................................................Contact us. |
|
|
|
|
|
|
|
|
|
| SLAVE
CONNECTION KIT |
|
|
|
|
|
|
Variable
Speed......See AC Variable Speed Drives
Section below |
| For
Slave Driving existing curves ............. |
$226.20 |
|
|
|
| (Please
Provide Sketch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DRIVE
COMPONENT DEDUCTS |
| PACKAGE
STOPS |
|
|
|
|
Less
Motor Drive, Motor Mount and Guards, |
| Angle
End Stop |
|
|
|
|
but
with Shaft Extension...Deduct................ |
$694.20 |
|
|
1-1/2”
x 1-1/2” x 12 Ga. Steel |
|
|
|
|
|
|
Less
Motor Only (1/2 HP-208/230/460/575V- |
|
|
13”
to 25” Between Rail Width .................. |
$31.75 |
|
|
|
|
|
|
3Ph.-60
Hz.).............Deduct.................... |
$258.30 |
|
|
27”
to 39” Between Rail Width .................. |
$50.80 |
|
|
|
|
|
|
*Less
Reducer..........Deduct..................... |
$307.40 |
Raised
Roller End Stop
2-1/8” Dia. Roller |
|
|
|
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
13”
to 25” Between Rail Width .................. |
$78.70 |
|
|
|
27”
to 39” Between Rail Width .................. |
$97.10 |
|
|
|
|
|
|
|
|
Hand
Operated Stop
(Blade or Roller Types, Specify). |
|
|
GUARD
RAILS |
|
|
Adjusted
Universal Channel Guard Rail |
|
|
13”
to 23” Between Rail Width ................ |
$538.60 |
|
|
Both
Sides............................per foot............. |
$15.10 |
|
|
25”
to 39” Between Rail Width ................ |
$592.20 |
|
|
One
Sides.............................per foot............. |
$7.80 |
| Air
Operated Linear Thruster Stop |
|
NOTE: For Diffuse or Retro-Reflective. |
|
(Pin,
Roller or Blade Type. Specify) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fixed
Channel Type - Overlapping (One Direction) |
|
13”
to 39” Between Rail Width.................. |
$1,701.30 |
|
|
|
|
|
3-1/2"
x 1-1/2" x 12 Ga........per foot......... |
$25.60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6-1/2"
x 1-1/2" x 12 Ga........per foot......... |
$32.60 |
NOTE: Filter Regulator Unit not supplied as standard.
Stops are supplied in NORMALLY DOWN position
with SINGLE SOLENOID VALVE. Can be supplied in
NORMALLY UP position. Can also be supplied with
DOUBLE SOLENOID VALVE. Contact us. |
|
|
|
|
10-1/2"
x 1-1/2" x 12 Ga......per foot......... |
$43.20 |
|
|
13-1/2"
x 1-1/2" x 12 Ga......per foot......... |
$51.50 |
|
|
|
|
|
|
|
Angle
Type "A" |
|
|
1-1/2"
x 1-1/2" x 12 Ga................................ |
|
|
|
|
|
|
|
|
|
|
both
sides per foot ........................................ |
$7.80 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE:
Fixed Channel Guard Rails are raised with
2” high spacer. 1” high spacers are available. Specify. |
|
|
|
|
|
|
|
|
|
Note: If product comes in contact with guard rails, product
flow will be affected. |
|
|
|
|
|
|
|
|
|
|
|
|
|
TURNING
WHEEL |
Turning
Wheels are used in converging 30° and 45° spur applications. Also
used at 90° (right angle) transfers where
Traffic Cops, Package Stops and other product flow controlling devices are
used. Wheel is mounted on adjustable
bracket to insure proper package orientation through transfer. Can be mounted
to slider bed or side channels of
powered and gravity conveyors - specify model where applicable. |
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
6" Dia. Turning
Wheel with mounting hardware............................$123.00 |
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START
SWITCH or
SAFETY DISCONNECT |
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$213.01 |
|
|
|
|
#033.2032
& #033.2072..................$555.67
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$332.11
Nema 4 |
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$854.26 |
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT
SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO
EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER
CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER
CORD WITH PLUG ONLY 20' LONG |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1A |
115/1 |
1/2-3/4 |
|
EA-039-2A |
115/1 |
1 |
|
EA-039-3A |
115/1 |
1
1/2 |
|
EA-039-4A |
230/1 |
1/2-1 |
|
EA-039-5A |
230/1 |
1
1/2-2 |
|
EA-039-6A |
208-230/3 |
1/2-2 |
|
EA-039-7A |
460/3 |
1/2-2 |
|
|
POWER
CORD WITH PLUG 20' LONG WITH MANUAL
START SWITCH AND MOUNTING BRACKET |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1B |
115/1 |
1/2-3/4 |
|
EA-039-2B |
115/1 |
1 |
|
EA-039-3B |
115/1 |
1
1/2 |
|
EA-039-4B |
230/1 |
1/2-1 |
|
EA-039-5B |
230/1 |
1
1/2-2 |
|
EA-039-6B |
208-230/3 |
1/2-2 |
|
EA-039-7B |
460/3 |
1/2-2 |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$118.10 |
|
|
|
|
|
|
|
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
#094.191........................................$691.31
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG.
STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4 |
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one
side.................$7.44 per / ft.
both
sides..............$15.87per
/ ft. |
|
|
|
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$279.61
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113
(100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128
with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37 |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
CONTROLLER
PRICES |
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY |
SINGLE PHASE CONTROLLER INPUT |
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,491.84 |
$1,189.37 |
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,724.27 |
|
| 2 |
N/A |
VSC-12-14 |
| Price |
~ |
|
THREE PHASE CONTROLLER INPUT |
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15 |
VSC-01-18 |
VSC-12-29 |
| Price |
|
|
|
| 1 |
VSC-01-16 |
VSC-01-19 |
VSC-12-29 |
| Price |
|
|
|
| 2 |
VSC-01-17 |
VSC01--20 |
VSC-12-30 |
| Price |
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS |
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT
NOTES... |
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$675.20 |
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.) |
|
|
| Brake
Relay Kit (EA-068A).............................. |
$542.68 |
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE |
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,058.00 |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$675.20 |
|
|
|
|
|
|
KIT INCLUDES |
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT
NOTES |
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined) |
|
|
|
An International
Electrotechnical Commission (IEC) term that means: “under short
circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use.” The only allowable damage to the starter
is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs. |
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
MOTOR
DUTY |
NON-REVERSING |
REVERSING |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
1/2 |
STANDARD EASY
CLEAN ENERG. EFF. |
|
|
|
|
$1516.60 |
|
|
|
|
$2,023.30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 |
GEARMOTORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
NON-REVERSING |
REVERSING |
NON-REVERSING |
REVERSING |
|
115 VOLT |
PRICE |
115 VOLT |
PRICE |
230 VOLT |
PRICE |
230 VOLT |
PRICE |
1/2 |
|
$1,182.40 |
|
$2,023.30 |
|
$1,435.60 |
|
$2,023.30 |
1 |
|
|
|
|
1-1/2 |
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
| •
Manual Start-Stop Switch Kit |
|
•
Start-Stop Push Button Kit, Remote Mounted |
|
EA-000001 ...................................... |
$242.09 |
|
|
EA-000002....................................... |
$242.09 |
|
Includes:
032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware |
|
|
Includes:
033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware |
|
|
|
|
|
• Forward-Reverse-Stop Push Button Kit,
Remote Mounted |
|
|
|
|
|
|
|
•
Up-Down-Stop Push Button Kit, Remote
Mounted |
|
EA-000003....................................... |
$440.67 |
|
|
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware |
|
|
EA-000004....................................... |
$440.67 |
|
|
|
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
•
“Start-Stop”Push-button Station |
033.1955
|
$211.23 |
|
|
033.195................................................. |
$142.50 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
•
“Fwd-Rev-Stop”Push Button Station |
| 033.1965 |
$397.05 |
|
|
033.196.................................................. |
$490.95 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
OPTIONAL
STARTER CONTROLS |
| 033.1975 |
$397.05 |
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
EA-011
............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$3,210.68 |
|
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES |
|
|
|
• Control Circuit Transformer Included for 115 Volt
Control Voltage.
• Above starters are in Nema 3, 4 and 12 Enclosures.
• The starters included Safety Disconnect, Overload
Relay, and Aux. Contacts as required.
• IF AN ORDER IS SUPPLIED LESS MOTOR,
AND IS SUPPLYING ANY ELECTRICAL
CONTROLS, THEN MOTOR HP, VOLTAGE,
PHASE, AND FULL LOAD CURRENT MUST BE
STATED ON THE ORDER.
• PRICING LISTED IS NOT MOUNTED OR WIRED. |
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
|
|
EA-012
(115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket. |
$3,253.63 |
|
|
$3,391.27 |
|
|
|
| • Add on |
$192.70 |
for
the above Push Buttons |
|
|
|
| to
be Mounted. |
|
|
|
| • Add on |
$995.10 |
for
the above Starters and |
|
|
|
Push
Button Stations to be Mounted and Wired.
Supply 20'0" of cable for push button only. |
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
|
|
|
|
|
|
|
|
#033.2122
B-05165 .............................................. |
|
|
|
|
|
|
|
$118.10 |
|
|
| CONVEYOR
WEIGHT TABLE |
| Between Rail Wdith |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
| Overall Frame Wdith |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
| 10'-0"
Base Weight |
670 |
693 |
716 |
739 |
762 |
785 |
808 |
854 |
877 |
923 |
946 |
| Weight Per Foot |
31 |
33 |
35 |
37 |
39 |
41 |
43 |
47 |
49 |
53 |
55 |
|
|
All
weights in catalog are conveyor weights only. Accessories, crating, etc.,
are not included.
Total Weight = 10' Base Weight + per foot weight x extra length |
|
Power Conveyor, Belt Driven,
Conveyor, Live Roller Conveyors, Powered Live Roller, Conveyors, and Roller
Conveyors from your source for material handling equipment. |
Back
to Product Category |
 |
|
2 in. x 2 in. x 14 Ga. plow arm