FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

MODEL 36-CRRH

Heavy Duty Chain Driven Live Roller with Hex Shaft
(Roll-to-Roll Type)

heavy duty chain driven live roller with hex shaft The Model 36-CRRH is a heavy-duty, chain
driven roller conveyor. Its tough, rugged design
allows it to provide service under demanding
manufacturing operations. Use the 36-CRRH for
conveying heavy pallets and drums.
• 12 Bed Widths
• Center Drive
• Energy Efficient Motor - AC Variable
   Speed Controller
• Reversible
• Chain Driven Rollers
• Fixed HSF - Type Floor Supports
    Available
 SIZE
TO
ORDER
Overall
Length
"A"
Conveying
Surface
19-3/4" 21-3/4" 23-3/4" 27-3/4" 29-3/4" 33-3/4" 35-3/4" 41-3/4" 47-3/4" 53-3/4" 55-3/4" 63-3/4"
Between Rail
Width
23" 25" 27" 31" 33" 37" 39" 45" 51" 57" 59" 67"
Overall Frame
Width
26-
27/32"
28-
27/32"
30-
27/32"
34-
27/32"
36-
27/32"
40-
27/32"
42-
27/32"
48-
27/32"
54-
27/32"
60-
27/32"
62-
27/32"
70-
27/32"
10' 6" R/C 1284 1336 1387 1490 1541 1644 1695 1849 2003 2157 2208 2412
Per Foot 99 103 107 115 119 127 131 143 155 167 186 206
10' 12" R/C 1044 1076 1108 1172 1204 1268 1300 1396 1492 1588 1620 1748
Per Foot 75 78 81 87 90 96 99 108 117 126 129 141
All weights are conveyor weights only. Accessories, crating, etc., are not included.

chain driven roller conveyor
roller conveyor
Rollers Centers
"B"
6"
22-3/4"
12"
25-3/4"

STANDARD SPECIFICATIONS
BED – Roller bed with 3-1/2 in. x .300 in. wall unplated
tread rollers with 1-1/16 in. hex shaft spaced every 6 in.
or 12 in. Mounted in 5 ft. long powder painted structural
steel channel frame bolted together with butt couplings.
SPEED REDUCTION–Heavy-duty sealed worm
gear C-Face speed reducer. No. 80 roller chain to
drive shaft.
MOTOR–2 HP–230/460V–3 Ph. 60 Hz. Energy
Efficient C-Face motor and MD65 AC Variable
Speed controller with softstart capability.
CENTER DRIVE – Top side mounted drive, mounted
to 5 ft. long section near center of conveyor. Chain guard
located on left hand side.
CONVEYING SPEED–Constant 3-30 FPM.
CAPACITY–Maximum load per linear foot of conveyor
2000 lbs. with supports on 5 ft. centers. NOT TO
EXCEED CAPACITY IN CHART.
DRIVE CHAIN–No. 60 roller chain.
CHAIN GUARD–Formed steel, upper and lower chain
guard mounted to top and bottom of channel frame to
totally enclose drive chains.
FLOOR SUPPORTS–Now supplied as optional
equipment.
BEARINGS–Sealed, pre-lubricated ball bearings.
LOAD CAPACITY CHART @ 30 FPM
HP
OVERALL FRAME WIDTH
OVERALL FRAME WIDTH
OVERALL FRAME WIDTH
26-27/32" to 30-27/32"
34-27/32" to 42-27/32"
48-27/32" to 62-27/32"
TOTAL LOAD (lbs.)
TOTAL LOAD (lbs.)
TOTAL LOAD (lbs.)
UP TO 30' UP TO 60' UP TO 90' UP TO 30' UP TO 60' UP TO 90' UP TO 30' UP TO 60' UP TO 90'
2 21000 19200 17400 20400 18000 15600 19400 16000 12500
3 27000 25200 23400 26400 24000 21600 25400 22000 18500
NOTE: Capacities based on Hytrol supplied chain.
OPTIONAL EQUIPMENT
FLOOR SUPPORTS–HSF Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every
bed joint and ends of conveyor. Holes in feet for lagging
to floor. Knee braces recommended above
HSF-6 support.
CONVEYING SPEED–Other constant and variable
speeds. NOTE: Capacity affected with speed change.
Contact us.
MOTORS–3 HP maximum.
ELECTRICAL CONTROLS–Push-Button stations.
PRICES FOR COMPLETE CONVEYOR INCLUDE:
• 3-1/2” Dia. x .300” Wall Rollers With 1-1/16” Hex Shaft Mounted in Structural Channel Frame
• No. 60 Roller to Roller Chain
• Side Mounted Center Drive
• “C” Face Speed Reducer–Sealed Worm Gear
• 2 HP–230/460V–3 Ph.–60 Hz. “C” Face Energy Efficient Motor (Specify Exact Voltage) and VSC
   AC Variable Speed Controller with Soft Start Capability (not mounted or wired).
• Totally Enclosed Chain Guard
• 3-30 FPM Variable Conveying Speed (Speeds Other Than 30 FPM, Contact us)
• Less Supports

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


Conveying
Surface
19-3/4" 21-3/4" 23-3/4" 27-3/4" 29-3/4" 33-3/4" 35-3/4" 41-3/4" 47-3/4" 53-3/4" 55-3/4" 63-3/4"

Between Rail
Width

23" 25" 27" 31" 33" 37" 39" 45" 51" 57" 59" 67"
Overall Frame
Width
26-
27/32"
28-
27/32"
30-
27/32"
34-
27/32"
36-
27/32"
40-
27/32"
42-
27/32"
48-
27/32"
54-
27/32"
60-
27/32"
62-
27/32"
70-
27/32"
6" Centers 5'
Drive Length-O.A.
6" Centers
Intermediate -
Per Foot
12" Centers 5' Drive Length-O.A.
12" Centers
Intermediate -
Per Foot
IMPORTANT NOTES

• OTHER LENGTHS
   For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 70- 27/32” OAW, contact us for
   lead time.
• INTERMEDIATE BEDS
  Use per foot price of width x required length, supports not included.
• FLOOR SUPPORTS
  Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first
  bed section and one (1) support required per bed section thereafter.
• NON-STANDARD WIDTHS
  Contact us for lead time.


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICES FOR OPTIONAL EQUIPMENT
FLOOR SUPPORTS MOTORS
Not Included in Base Price. Use Chart Below for
Required Elevation.
3 HP-208/230/460/575 V-3 Ph.-60 Hz. motor,
controller, and reducer in place of standard
Add-on ....................................................... $1,512.30
STRUCTURAL NON-ADJUSTABLE SUPPORTS
Model No. Adjustment to
Top of Roller
Weight
(Lbs.)
Price Each
HSF-09 9-3/8" 28
$131.60
HSF-10 10" 29 1/2
$134.40
*HSF-11 11" 31
$136.90
*HSF-12 12" 32 1/2
$139.60
*HSF-13 13" 34
$142.30
*HSF-14 14" 35 1/2
$145.00
*HSF-15 15" 37
$147.60
*HSF-16 16" 38 1/2
$149.50
*HSF-17 17" 40
$152.50
*HSF-18 18" 41 1/2
$155.00
*HSF-19 19" 43
$157.50
*HSF-20 20" 44 1/2
$160.40
*HSF-21 21" 46
$162.80
*HSF-22 22" 47 1/2
$165.20
*HSF-23 23" 49
$168.30
*HSF-24 24" 50 1/2
$192.30
*HSF-25 25" 52
$194.80
*HSF-26 26" 53 1/2
$196.90
*HSF-27 27" 55
$199.20
*HSF-28 28" 56 1/2
$201.70
*HSF-29 29" 58
$201.90
*HSF-30 30" 59 1/2
$205.90
DRIVE COMPONENT DEDUCTS
Less Complete Drive, but with Drive Shaft
Extension and Sprocket ........................................
....................... Deduct.............................. $2,407.80
Less Motor and Controller Only ..............................
........................Deduct ............................ $2,109.60
Less Controller Only ................................................
........................Deduct ............................ $1,379.70
Mount and Wire Controller ................................
........................Add-on .........................

$675.20

NOTE: IF SUPPLIED LESS CONTROLLER,
CUSTOMER TO SUPPLY SOFT START
MECHANISM AND ASSUME RESPONSIBILITY
FOR APPLICATION.
GALVANIZING
Contact us.
Knee Braces (Included in support price)
   Extra Braces ......Add per pair ................... $72.80

Chain Driven Live Roller Conveyor, Roll-to-Roll, Chain Driven Live Roller Conveyors, Conveyor, Live Roller
Conveyors, Powered Live Roller, Conveyors, and Roller Conveyors from your source for material handling
equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart