FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

MODEL 190-NSPC, NSPS AND NSPSS

LIVE ROLLER CONVEYOR
live roller conveyor The 190 Spool Curves and Spurs are designed
to be slave driven from the 190-NSP
Conveyor. Curves are used where turns in the
conveyor line are necessary. Spurs are used in
diverging and converging applications.
12 Bed Widths
Slave Driven from Model 190-NSP
Adjustable MS-Type Floor Supports Available

DRAWING FOR 190-NSPC (Live Roller Curve)
live roller curve conveyor
DRAWING FOR 190-NSPS (Live Roller Spur)
live roller spur conveyor
DRAWING FOR 190-NSPSS (Live Roller Straight Spur)
live roller straight spur conveyor
LOAD CAPACITY CHART
Overall
Frame
Width		 190-NSPC 190-NSPS 190-NSPSS
Capacity Per Curve (Lbs.)
Capacity Per Spur (Lbs.) Capacity Per St. Spur (Lbs.)
45º 30º 45º 30º
16" 240 300 285 375 480
18" to 30" 300 405 435 375 480
34" to 42" 450 540 720 375 480
STANDARD SPECIFICATIONS
BED–Roller bed with 2-1/2 in. dia. tapered to
    1-11/16 in.dia. x 16 ga. galvanized 1.9 in. dia. roller x
    16 ga. galvanized tube. Mounted in 9-1/2 in. x 12 ga.
    powder painted formed steel channel frame bolted
    together with splice plates. 		DRIVE SPOOLS–2 in. dia. Delrin spool held in place
    on drive shaft with spool spacers.
DRIVE GUARD–Underside of drive shaft with spools
    and drive o-rings guarded full length of conveyor.
DRIVE O-RING–3/16 in. dia. polyurethane o-ring
    from drive spool to tread rollers.
FLOOR SUPPORTS–Now supplied as optional
    equipment.
BEARINGS–Sealed, pre-lubricated, self-aligning, ball
    bearings with eccentric lock collar on drive shaft.
    Pre-lubricated ball bearings in tread rollers.
SLAVE DRIVEN–Curves and spurs are slave driven
    from drive shaft of Model 190-NSP conveyor. Shafts
    are coupled by chain coupling at bed joints.
SPLICES PLATES-Standard for connecting to
    190-NSP.
DRIVE SHAFT–1 in. dia. steel shaft extends full length
    of conveyor, coupled with universal joints (U joints) at
    necessary intervals
CAPACITY–See Load Capacity Chart.
OPTIONAL EQUIPMENT
CONVEYING SPEED–Other constant and variable
    speeds from 30 to 120 FPM. Over 120 FPM timing belt
    drive recommended. Capacity affected with speed
    change.		 FLOOR SUPPORTS–MS Type floor supports are
    available with a wide range of adjustment. Specify top
    of belt or roller elevation. One support required at
    every bed joint and ends of conveyor. Holes in feet
    for lagging to floor. Knee braces recommended
    above MS-6 support.
DRIVE–24 in. long drive section replaces standard
    6-1/4 in. or 18 in. tangent on end of 190-NSPC or
    190-NSPS. No change on 190-NSPSS. Specify
    RH or LH.
POLY-TIER SUPPORTS–36 in. to 120 in. support
    heights in 6 in. increments. Knee braces supplied.
GUARD RAILS–Adjustable Universal Channel Guard
    Rail, fixed channel or type A & B angle. NOTE:
    If product comes in contact with guard rails,
    product flow will be affected.		 CEILING HANGERS–5/8 in. dia. x 8 ft. long unplated
    rods fully threaded. Other lengths and galvanized rods
    available.
OPTIONAL TANGENTS–Available in 3 in.
    increments up thru 48 in. long.
PRICES FOR COMPLETE CONVEYOR INCLUDE:
2-1/2" Dia. Tapered to 1-11/16" Dia. x 16 Ga.
    Galvanized, mounted in a 9-1/2" x 12 Ga. Channel
    Frame (Curve Section Only)		 live roller conveyor
1.9” Dia. x 16 Ga. Galvanized Roller (rollers on 3”
    Centers) in a 9-1/2” x 12 Ga. Channel Frame (Straight
    Section Only)
Less Electrical Controls
Less Floor Supports
Slave Driven from 190-NSP
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
190-NSPC Live Roller Curve (Less Drive)
Between
Rail Width		 15" 21" 27" 33" 39"
Overall
Frame Width		 18" 24" 30" 36" 42"
90º
60º
45º
30º
NOTE: Base price does not include cross-over when required.
Drive Add On............................................................................................................................................. $1,625.00
Includes 1/2 HP 208/230/460/575 V - 3 Ph. - 60 Hz. - Totally Enclosed Motor with C Face Reducer
to provide 65 FPM Constant Speed.
24" Tangent Add On................................................................................................................................ $877.60
190-NSPS Live Roller Spur (Less Drive)
Between
Rail Width		 15" 21" 27" 33" 39"
Overall
Frame Width		 18" 24" 30" 36" 42"
45º
30º
NOTE: Base price does not include crossover when required.
Drive Add On............................................................................................................................................. $1,625.00
Includes 1/2 HP 208/230/460/575 V - 3 Ph. - 60 Hz. - Totally Enclosed Motor with C Face Reducer to
provide 65 FPM Constant Speed.
24" Tangent Add On................................................................................................................................ $877.60
190-NSPSS Live Roller Straight Spur (Less Drive)
Between
Rail Width		 15" 21" 27" 33" 39"
Overall
Frame Width		 18" 24" 30" 36" 42"
45º
30º
NOTE: Base price does not include crossover when required.
Drive Add On............................................................................................................................................. $1,625.00
Includes 1/2 HP 208/230/460/575 V - 3 Ph. - 60 Hz. - Totally Enclosed Motor with C Face Reducer to
provide 65 FPM Constant Speed.
IMPORTANT NOTES...
NON-STANDARDS WIDTHS WITH
   STANDARD INSIDE RADIUS		 WHEN ORDERING
Live Roller Spurs, please specify Right or Left Hand
Unit and Converging or Diverging Flow.
See illustration.
Contact us for lead time.
FLOOR SUPPORTS
Floor Supports are not included in base price.
Curve Only: There are two (2) stationary floor supports
and one (1) single center leg required.
Curve Spur: There is one (1) stationary floor support and
one (1) single center leg required.
Straight Spur: There is one (1) stationary floor support
required.		 live roller curve conveyor
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
PRICES FOR OPTIONAL EQUIPMENT
CONSTANT AND VARIABLE SPEEDS FLOOR SUPPORTS
Constant-Within 30 to 120 FPM .............. No Charge Not Included in Base Price. Use Chart Below for
Required Elevation.
Variable Speed ............. See Electrical Controls and
Drive Section See Below
"MS" SUPPORT
Model No. Adjustment to Top of Roller Price each
*MSL-1 11-3/4" to 12-3/4"
*MSL-2 12-3/4" to 14-1/2"
*MSL-3 14-1/2" to 17-1/8"
*MS-1 16-3/4" to 18-1/2"
*MS-1.2 17-3/4" to 19-1/2"
*MS-1.4 18-3/4" to 20-1/2"
*MS-2 19-3/4" to 22-3/4"
*MS-3 22-3/8" to 25-3/8"
MS-4 25-3/8" to 31-3/8"
MS-5 29-3/8" to 45-3/8"
MS-6 33-3/8" to 45-3/8"
MS-7 43-3/8" to 55-3/8"
MS-8 55-3/8" to 67-3/8"
MS-9 67-3/8" to 79-3/8"
MS-10 79-3/8" to 91-3/8"
MS-11 89-3/8" to 101-3/8"
MS-12 101-3/8" to 113-3/8"
CROSSOVER
Chain
Speeds up to 120 FPM ..........Add-on ............. $833.70
#50 O-Ring Chain
Speeds up to 120 FPM ..........Add-on .............

$1,161.90
ELECTRICAL CONTROLS
(See below)
TRAFFIC COP
(See below)
TURNING WHEEL
(See below)
TANGENTS
*OAL Tangent 190-NSPC & 190-NSPS
9", 12", 15", 18" & 21" $438.60
24", 27", 30", 33" & 36" $877.60
39", 42", 45" & 48" $1,169.70
* "OAL Tangent" includes a 6-1/4" long tangent on 90° & 60° and
an 18" long tangent on a 30° & 45°. Tangent lengths increase in 3"
increments only. For Tangents over 18" long on either or both
ends, add one additional floor support per end.
* Less than 24" top of roller elevation - Low Elevation
Drive Required.
NOTE: MS-7 to MS-12: Knee Braces included in price.
Extra Knee Braces .........Add per pair ....... $30.00
Single Center Leg ..(MS-6 and below) ea... $60.40
Single Center Leg ..(MS-7 and above) ea... $75.10
GUARDS RAILS
PACKAGE STOPS
Adjustable Universal Channel Guard Rail ....
Angle End Stop
90°, 60°, 45°, & 30°
1-1/2" x 1-1/2" x 12 Ga. Steel
Both Sides ............................................... $224.40
13" to 25" Between Rail Width ................. $31.75
One Side .................................................. $151.30
27" to 39" Between Rail Width ................. $50.80
Inside Only ............................................... $99.70
Raised End Roller Stop
Angle Type "A"
2-1/8" Dia. Roller
1-1/2" x 1-1/2" x 12 Ga.
13" to 25" Between Rail Width ................ $78.70
90°, 60°, 45°, & 30°
Both Sides ............................................... $91.80 27" to 39" Between Rail Width ................ $97.10
One Side ................................................. $56.90
Hand Operated Stop
Inside Only ............................................... $33.70
(Blade or Roller Types, specify)
Angle Type "B"
13" to 23" Between Rail Width ................. $538.60
1-1/2" x 1-1/2" x 12 Ga.
25” to 39” Between Rail Width ................ $592.20
90°, 60°, 45°, & 30°
Both Sides ............................................... $137.20
Air Operated Linear Thruster Stop
One Side ................................................. $87.10
(Pin, Roller or Blade Types, specify)
Inside Only ............................................... $50.60
13" to 39" Between Rail Width .................... $1,701.30
Fixed Channel Type - 90°, 60°, 45°, & 30°
3-1/2" x 1-1/2" x 12 Ga. 6-1/2" x 1-1/2" x 12 Ga.
Both Sides .......$219.00 Both Sides ....... $406.10 NOTE: Filter Regulator Unit not supplied as standard.
Stops are supplied in NORMALLY DOWN position.
Can be supplied in Normally Up position–Specify.
Outside Only ... $138.30 Outside Only .... $256.40
Inside Only ...... $81.90 Inside Only ....... $145.00
10-1/2" x 1-1/2" x 12 Ga. 13-1/2" x 1-1/2" x 12 Ga.
Both Sides ...... $625.20 Both Sides ....... $812.70
Outside Only ... $394.60 Outside Only ... $512.80 GALVANIZING
Inside Only ...... $222.80 Inside Only ...... $304.00 Contact us.
NOTE: If product comes in contact with guard rails, product
flow will be affected.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
PRECISION ROLLER BEARINGS (Recommended for speeds above 120 FPM.)
ABEC-1 Bearings for tapered rollers.
190-NSPC
Between Rail
Width		 13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame
Width		 16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
90º
60º
45º
30º
190-NSPS
Between Rail
Width		 13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame
Width		 16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
45º
30º
TRAFFIC COP
traffic cop
The Traffic Cop controls product flow from one conveyor onto
another. It allows products from one line of traffic to flow freely,
without interference from another converging line of traffic. This
eliminates collision of products which may cause damage and
disrupt product flow. Specify model, width and degree.
7 arm widths, aluminum
Available in 30°, 45°, 60°, 90° & 180° applications.
Includes mounting hardware
* 180° application - 10" minimum required between lines
5 lbs. Minimum Package Weight at 65 FPM Required to
   Actuate Arm.		 190-SPS, SPSS, NSP, NSPC, NSPS & NSPSS
190-ACC, LRS, & LRS
Overall Frame Width 16" to 28" 30" to 42"
Price Each
250 lbs. Maximum Accumulated Capacity
CEILING HANGERS
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated
fully threaded rods ......................................................................
ceiling hangers for conveyors $147.90
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized
fully threaded rods .......................................................................
$176.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long unplated fully
threaded rods................................................................................
$218.40
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long galvanized fully threaded rods.................................................................................
$359.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long unplated fully threaded rods.................................................................................
$362.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long galvanized fully threaded rods..................................................................................
$419.40
Ceiling Hanger Brackets, Less Rods Only .................................... $93.10
Extra Length Rods:
(2) 8’-0” long x 5/8” dia. unplated fully threaded rods .................. $54.20
(2) 8’-0” long x 5/8” dia. galvanized fully threaded rods ............... $83.40
(2) 10’-0” long x 5/8” dia. unplated fully threaded rods ................ $125.20
(2) 10’-0” long x 5/8” dia. galvanized fully threaded rods ............. $266.30
(2) 12’-0” long x 5/8” dia. unplated fully threaded rods ................ $269.60
(2) 12’-0” long x 5/8” dia. galvanized fully threaded rods ............. $326.50
Hex Coupling Nuts for Rods ......................................................... $4.90
Above noted delivery times determined by delivery time of model ordered.
POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
 IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
   conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
TURNING WHEEL
Turning Wheels are used in converging 30° and 45° spur applications. Also used at 90° (right angle)
transfers where Traffic Cops, Package Stops and other product flow controlling devices are used.
Wheel is mounted on adjustable bracket to insure proper package orientation through transfer. Can be
mounted to slider bed channels of powered and gravity conveyors - specify model where applicable.
turning wheels
6" Dia. Turning Wheel with mounting hardware ............... $123.00
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
 limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $213.01 #033.2032 & #033.2072..................$555.67
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole
#033.2033& #033.2072...................$332.11
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $854.26
"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range
foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.
PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$118.10
AIR PRESSURE SWITCH
#094.191........................................$691.31
Nema 4
EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.44 per / ft.
                  both sides..............$15.87per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$279.61
Nema 4
PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED 		"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,491.84 $1,189.37
1 VSC-12-11 VSC-12-13
Price $1,724.27
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
• Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)		 $675.20
Brake Relay Kit (EA-068A).............................. $542.68 • When AC Variable Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $542.68 for this option.)
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,058.00
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)		 $675.20
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1516.60
$2,023.30
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$1,182.40
$2,023.30
$1,435.60
$2,023.30
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $242.09 EA-000002....................................... $242.09
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware		 Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
• Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $440.67
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware		 EA-000004....................................... $440.67
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
 $211.23 033.195................................................. $142.50
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $397.05 033.196.................................................. $490.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $397.05
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
 $3,210.68
IMPORTANT NOTES
• Control Circuit Transformer Included for 115 Volt
  Control Voltage.
• Above starters are in Nema 3, 4 and 12 Enclosures.
• The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
• IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
• PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket.		 $3,253.63
$3,391.27
• Add on $192.70 for the above Push Buttons
  to be Mounted.
• Add on $995.10 for the above Starters and
  Push Button Stations to be Mounted and Wired.
  Supply 20'0" of cable for push button only.
• Mounting Brackets for photo eye
#033.2122
B-05165 ..............................................
$118.10
190-NSPC CONVEYOR WEIGHT CHART
Between
Rail
Width		 Overall
Frame
Width		 "R" Total Number of Rollers* WEIGHTS (Lbs.)
90º 60º 45º 30º 90º 60º 45º 30º
13" 16" 24" 16T/4S 10T/4S 8T/12S 5T/12S 179 144 157 132
15" 18" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 222 184 183 151
17" 20" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 235 197 192 158
19" 22" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 248 209 202 165
21" 24" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 259 224 211 173
23" 26" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 281 233 222 181
25" 28" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 285 246 231 189
27" 30" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 299 258 241 199
31" 34" 48" 28T/4S 20T/4S 14T/12S 10T/12S 437 338 313 247
33" 36" 48" 28T/4S 20T/4S 14T/12S 10T/12S 452 353 326 259
37" 40" 48" 28T/4S 20T/4S 14T/12S 10T/12S 484 380 349 272
39" 42" 48" 28T/4S 20T/4S 14T/12S 10T/12S 503 395 361 285
All weights are conveyor weights only.
Accessories, crating, etc, are not included.
* T = TAPERED
S = STRAIGHT
MODEL 190-NSPS CONVEYOR WEIGHT CHART
Between
Rail
Width		 Overall
Frame
Width		 "R" "A" "B" "C" "D" "E" Number
of Rollers*		 WEIGHTS
(Lbs.)
45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º
13" 16" 24" 29" 38" 27" 36" 21" 30" 21 7/8" 38" 50" 42 1/4" 8T/12S 10T/11S 173 176
15" 18" 32 1/2" 32" 41" 30" 39" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 230 263
17" 20" 32 1/2" 35" 47" 33" 45" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 240 274
19" 22" 32 1/2" 38" 50" 36" 48" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 250 283
21" 24" 32 1/2" 41" 53" 39" 51" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 259 293
23" 26" 32 1/2" 44" 56" 42" 54" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 268 303
25" 28" 32 1/2" 47" 62" 45" 60" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 280 316
27" 30" 32 1/2" 50" 65" 48" 63" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 288 325
31" 34" 48" 56" 74" 54" 72" 48" 75" 48" 89" 86" 85 1/2" 14T/21S 20T/26S 410 499
33" 36" 48" 59" 77" 57" 75" 48" 75" 48" 89" 86" 85 1/2" 14T/21S 20T/26S 422 513
37" 40" 48" 65" 86" 63" 84" 48" 75" 48" 89" 86" 85 1/2" 14T/21S 20T/26S 446 540
39" 42" 48" 68" 89" 66" 87" 48" 75" 48" 89" 86" 85 1/2" 14T/21S 20T/26S 457 553
All weights are conveyor weights only. Accessories, crating, etc, are not included.
* T = TAPERED
S = STRAIGHT
MODEL 190-NSPSS CONVEYOR WEIGHT CHART
Between
Rail
Width		 Overall
Frame
Width		 "A" "B" WEIGHTS
(Lbs.)
45º 30º 45º 30º 45º 30º
13" 16" 29" 38" 27" 36" 177 224
15" 18" 32" 41" 30" 39" 184 233
17" 20" 35" 47" 33" 45" 191 241
19" 22" 38" 50" 36" 48" 198 249
21" 24" 41" 53" 39" 51" 204 256
23" 26" 44" 56" 42" 54" 210 262
25" 28" 47" 62" 45" 60" 219 272
27" 30" 50" 65" 48" 63" 225 278
31" 34" 56" 74" 54" 72" 237 290
33" 36" 59" 77" 57" 75" 242 296
37" 40" 65" 86" 63" 84" 253 306
39" 42" 68" 89" 66" 87" 256 310
All weights are conveyor weights only. Accessories, crating, etc, are not included.
* T = TAPERED
S = STRAIGHT
Accumulating Conveyor, Live Roller Conveyor, Spool Conveyor, Conveyor, Live Roller Conveyors, Powered Live
Roller, Conveyors, and Roller Conveyors from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart