 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
20
Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401)
421-5679 |
|
|
|
|
Back to Product Category
|
|
|
|
 |
|
 |
|
|
|
| STANDARD
SPECIFICATIONS |
|
|
|
|
| BELT–
Ultimate 140 BBS - Nitrile. |
|
SNUB
IDLER–Adjustable 2-1/8 in dia. pre-lubricated
ball bearings. |
|
|
BED–Roller
bed with 1.9 in. dia. roller x 16 ga.
galvanized tube spaced every 3 in. and 1.9 in. dia.
pressure roller x 16 Ga. galvanized tube spaced every
6 in. Mounted in 6-1/2 in. x 12 Ga. powder painted
formed steel channel frame bolted together with butt
couplings. |
|
|
|
|
|
RETURN
IDLER–Adjustable 1.9 in dia. Pre-lubricated
ball bearings. |
|
|
|
|
TAKE-UP–Take-ups
in center drive. Provides 16 in.
of belt take-up. |
|
|
|
|
BEARINGS–Sealed,
pre-lubricated, self-aligning, ball
bearings on drive, tail, and take-up pulleys. Pre-lubricated
ball bearings in tread and pressure rollers. |
|
|
CROSS
BRACING–Rods with turnbuckles are
fastened to underside of bed to provide proper align-
ment of bed rollers and insure correct product tracking.
Supplied on every other section 30 ft. bed lengths and
over. |
|
|
|
|
|
SPEED
REDUCTION–Sealed worm C-Face gear
reducer. No. 50 roller chain to drive sheave. |
|
|
|
|
MOTOR–1/2
HP–208/230/460/575V–3 PH. 60 Hz.
Totally Enclosed C-Face. |
|
|
CENTER
DRIVE–Can be placed in any section of
conveyor length. |
|
|
|
|
|
CONVEYING
SPEED–Constant 65 FPM. |
|
|
DRIVE
PULLEY–8 in. dia. with 1-7/16 in. dia. shaft
at bearings, fully lagged. |
|
|
|
|
|
CAPACITY–Maximum
load per linear foot of conveyor
200 lbs. NOT TO EXCEED capacity in chart. |
|
|
TAIL
PULLEY–4 in. dia. with 1 in. dia. shaft at
bearings,machine crowned. |
|
|
|
|
|
FLOOR
SUPPORTS–Now supplied as optional
equipment. |
|
|
|
|
|
LOAD CAPACITY
CHART @65 FPM |
| HP |
OVERALL
FRAME WIDTH |
OVERALL
FRAME WIDTH |
OVERALL
FRAME WIDTH |
| 16"
TO 22" |
24"
TO 30" |
34"
TO 42" |
| TOTAL
LOAD (LBS.) |
TOTAL
LOAD (LBS.) |
TOTAL
LOAD (LBS.) |
| UP TO 50' |
UP TO 100' |
UP TO 50' |
UP TO 100' |
UP TO 50' |
UP TO 100' |
| 1/2 |
1100 |
200 |
600 |
- |
- |
- |
| 1 |
3300 |
2400 |
2800 |
1600 |
2200 |
- |
| 2 |
7000 |
6000 |
6400 |
5200 |
5800 |
3300 |
|
|
OPTIONAL
EQUIPMENT |
|
|
|
|
FLOOR
SUPPORTS–MS Type . oor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to . oor. Knee braces recommended above
MS-6 support. |
|
GUARD
RAILS–Adjustable Universal channel guard
rail, fixed channel, type A angle elevated to allow for
pop-out tread rollers. Type B angle not available. (See
Accessory section.) NOTE: If product comes in
contact with guard rails, product flow will be
affected. Fixed channel overlapping, one direction.
Fixed channel non-overlapping, reversing. |
|
|
|
CONVEYING
SPEED–Other constant and variable
speeds from 20 to 90 FPM. V-belt drive supplied under
46 FPM (2 HP) and with variable speeds. |
|
|
|
|
ROLLER
CENTERS–Tread rollers spaced every 4 in.,
6 in., or 8 in. (4 in. or 8 in. centers NOT AVAILABLE in
7 ft. 6 in. bed). |
NOTE:
Capacity and accumulation feature
affected with speed change. |
|
|
|
|
POLY-TIER
SUPPORTS–36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
|
SIDE
MOUNTED LOW ELEVATION CENTER
DRIVE–Motor reducer unit mounted to side of
conveyor. Minimum low elevation 16 in. |
|
|
|
|
|
|
|
CEILING
HANGERS–5/8 in. dia. x 8 ft. long unplated
rods fully threaded. Other lengths and galvanized rods
available. |
|
|
|
SIDE
MOUNTED END DRIVE–Minimum elevation
12-1/4 in. (underside take-up required). |
|
|
|
|
|
|
|
MOTORS–Energy
efficient, single phase, other
characteristics. 2 HP maximum. |
|
|
|
V-BELT
DRIVE–V-belt supplied between motor and
reducer. Allow 65 in. |
|
|
|
|
|
|
|
ELECTRICAL
CONTROLS–Non-reversing or
reversible magnetic starters and push–button stations.
AC variable frequency drive. |
O-RING
DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
|
|
|
|
|
|
PACKAGE
STOPS–Roller or pin type stops available,
contact us. |
|
|
|
|
|
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
 1.9" Dia. x 16 Ga. Galvanized Roller (Rollers on 3"
Centers) in a 6-1/2" x 12 Ga. Channel Frame |
|
1/2 HP-"C" Face Totally Enclosed Motor
(Specify Exact Voltage) |
| Black Ultimate 140 BBS Belt |
|
Totally Enclosed Chain Guard |
| LessFloor Supports |
|
65 FPM Constant Conveying Speed |
| "C" Face Speed Reducer-Sealed
Worm Gear |
|
End Guards |
|
|
Less Electrical Controls |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
SIZE TO
ORDER
Overall
Length
"A" |
Between
Rail Widths |
| 15" |
21" |
27" |
33" |
39" |
Overall
Frame Widths |
| 18" |
24" |
30" |
36" |
42" |
Ultimate
140 BBS Belt Widths |
| 6" |
8" |
| 10' |
|
|
|
|
|
| 15' |
|
|
|
|
|
| 20' |
|
|
|
|
|
| 25' |
|
|
|
|
|
| 30' |
|
|
|
|
|
| 35' |
|
|
|
|
|
| 40' |
|
|
|
|
|
| 45' |
|
|
|
|
|
| 50' |
|
|
|
|
|
| 55' |
|
|
|
|
|
| 60' |
|
|
|
|
|
| 65' |
|
|
|
|
|
| 70' |
|
|
|
|
|
| 75' |
|
|
|
|
|
| 80' |
|
|
|
|
|
| 85' |
|
|
|
|
|
| 90' |
|
|
|
|
|
| 95' |
|
|
|
|
|
| 100' |
|
|
|
|
|
| Per Foot Price |
|
|
|
|
|
|
|
|
|
|
|
| IMPORTANT
NOTES... |
BED LENGTHS |
|
| OTHER LENGTHS |
|
Intermediate
bed sections are available in multiples
of 4', 5', 6', 7-1/2', 8' and 10' lengths only.
Minimum
standard units consult us. |
|
| |
Other
lengths not listed in price chart are available. For
"IN-BETWEEN SIZES", use next larger Overall
Length "A" price. SEE BED LENGTHS BELOW |
|
| INTERMEDIATE BEDS |
|
| OTHER WIDTHS |
|
| |
Use
per foot price of width x required length, supports
not included. From Stockyard, available in 10 ft.
lengths only. |
|
| |
For
"IN-BETWEEN WIDTHS", use next width plus
10%. For widths over 63" OAW, contact us. |
|
| NON-STANDARD WIDTHS |
|
| FLOOR SUPPORTS |
|
| |
Contact
us for lead time. |
|
Floor
Supports are not included in base price.There
are two (2) stationary floor supports required for
the first bed section and one (1) support per bed
section thereafter. |
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
| MOTORS |
Extra Motor Price for OTHER THAN: 1/2 HP-208/230/460/575V-3 Ph.-60 Hz.-Totally
Enclosed.
Speed affects horsepower requirements. |
|
H.P.
REQ. |
TOTALLY ENCLOSED |
ENERGY EFFICIENT |
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
1 Ph.-60 Hz. |
230/460V
3 Ph.-60 Hz. |
575V
3 Ph.-60 Hz. |
| 1/2 |
N/C |
|
|
|
| 1 |
N/A |
|
|
|
| 2 |
N/A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OPTIONAL DRIVES |
|
|
DRIVE COMPONENT DEDUCTS |
| Unified
Drives: (Shaft Mounted) |
|
|
|
Less
Motor Drive, Motor Mount and Guards, |
|
|
| Unified Drives: |
OVERALL
FRAME WIDTH |
| 16" to 28" |
30" to 42" |
Center Drive 8” Drive Pulley with
075 Reducer |
|
|
Center Drive 8” Drive Pulley with
090 Reducer |
|
|
|
|
|
|
but
with Shaft Extension Deduct .................. |
$694.20 |
|
|
|
Less
Motor Only (1/2 HP-208/230/460/ |
|
|
|
|
|
|
575V-3
Ph.-60 Hz.) ....Deduct ................... |
$258.30 |
|
|
|
Less
Reducer* ..... Deduct ......................... |
$307.40 |
|
|
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
| 8”
Drive Pulley |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speed FPM |
65 |
78 |
97 |
130 |
156 |
195 |
260 |
389 |
Max HP |
1 |
1.2* |
1 |
2 |
2 |
2 |
2 |
2** |
|
|
|
|
|
|
|
|
|
|
|
|
SLAVE CONNECTION KIT |
|
|
|
For
Slave Driving existing curves ................. |
$226.20 |
|
|
|
(Please
Provide Sketch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GALVANIZING |
*
Reducer size increases with 2 HP.
**Contact us. |
|
|
|
|
|
Contact
us. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CONSTANT AND VARIABLE SPEEDS |
Drive Type |
OVERALL
FRAME WIDTH |
16" to
28" |
30" to
42" |
Center
Drive (V-Belt) |
|
|
Low
Elevation Side Mounted
Center Drive (C-Face) |
|
|
Low
Elevation Side Mounted
Center Drive (V-Belt) |
|
|
Center
Drive with Extended Take-Up
C-Face |
|
|
Center
Drive with Extended Take-Up
V-Belt |
|
|
High
Performance Center Drive (C-Face) |
|
|
Heavy
Duty Center Drive (C-Face) |
|
|
Side
Mounted End C-Face with
Underside Take-Up |
|
|
Side
Mounted End V-Belt with
Underside Take-Up |
|
|
|
|
|
|
Constant C-Face-Within
17-134 FPM |
|
|
|
|
|
|
|
......................................................... |
No
Charge |
|
|
|
|
|
|
|
|
|
|
Variable
Speed
See AC Variable Speed Drives |
|
|
|
|
|
|
|
|
|
| #50
O-Ring Drive Chain ...................Add ......$284.40 |
|
|
|
|
|
|
|
|
| #60
O-Ring Drive Chain ...................Add ......$406.00 |
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
| FLOOR SUPPORTS |
|
|
|
|
|
|
|
|
|
|
|
CEILING HANGERS |
|
|
Not
Included in Base Price. Use Chart Below for
Required Elevation. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"MS"
SUPPORT |
|
|
|
|
|
|
|
|
|
| Model No. |
Adjustment to Top
of Belt |
Price Each |
| *MS-1 |
13-3/4"
to 15-1/2" |
|
| *MS-1.2 |
14-3/4"
to 16-1/2" |
|
| *MS-1.4 |
15-3/4"
to 17-1/2" |
|
| *MS-2 |
16-3/4"
to 19-3/4" |
|
| MS-3 |
19-3/8"
to 22-3/8" |
|
| MS-4 |
22-3/8"
to 28-3/8" |
|
| MS-5 |
26-3/8"
to 32-3/8" |
|
| MS-6 |
30-3/8"
to 42-3/8" |
|
| MS-7 |
40-3/8"
to 52-3/8" |
|
| MS-8 |
52-3/8"
to 64-3/8" |
|
| MS-9 |
64-3/8"
to 76-3/8" |
|
| MS-10 |
76-3/8"
to 88-3/8" |
|
| MS-11 |
86-3/8"
to 98-3/8" |
|
| MS-12 |
98-3/8"
to 110-3/8" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ceiling Hanger Brackets with
(2) 5/8” dia. x
8’-0” long unplated fully threaded rods...... |
|
|
|
|
$147.90 |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
8’-0” long galvanized fully threaded rods.... |
|
|
|
|
$176.60 |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
10’-0” long unplated fully threaded rods..... |
|
|
|
|
$218.40 |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
10’-0” long galvanized fully threaded rods.... |
|
|
|
|
$359.60 |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
12’-0” long unplated fully threaded rods..... |
|
|
|
|
$362.60 |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x
12’-0” long galvanized fully threaded rods.... |
|
|
|
|
$419.40 |
|
|
|
Ceiling
Hanger Brackets, Less Rods Only.... |
$93.10 |
|
|
|
Extra
Length Rods: |
|
|
|
|
(2)
8’-0” long x 5/8” dia. unplated fully
threaded rods ............................................ |
|
|
|
|
$54.20 |
| *Knee
Braces ...................... Per pair ................ $30.00 |
|
|
(2)
8’-0” long x 5/8” dia. galvanized fully
threaded rods ............................................. |
|
|
|
|
|
|
|
|
|
| *Less
than 19 1/2" top of roller elevation-Low |
|
|
|
$83.40 |
|
|
|
Elevation
Side Mounted Center Drive Required (16"
Minimum Elevation). |
|
|
|
|
|
2)
10’-0” long x 5/8” dia. unplated fully
threaded rods .............................................. |
|
|
|
|
|
$125.20 |
|
NOTE: MS-7 to MS-12: Knee Braces included in price. |
|
|
|
(2)
10’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$266.30 |
|
|
|
|
|
|
|
(2)
12’-0” long x 5/8” dia. unplated fully
threaded rods .............................................. |
|
|
|
|
|
|
|
|
$269.60 |
|
|
|
|
|
|
|
(2)
12’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................. |
|
|
|
|
|
|
|
|
$326.50 |
|
|
|
|
|
|
|
Hex
Coupling Nuts for Rods ........................ |
$4.90 |
|
|
|
POLY-TIERS SUPPORTS (POWERED & GRAVITY
CONVEYORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR COMPLETE SUPPORT INCLUDE: |
 |
|
|
IMPORTANT
NOTES |
|
|
|
|
|
|
|
|
Painted Steel Support Legs |
|
|
Check for Clearance |
|
|
Adjustable Crosspipe Assembly |
|
|
Specify type of conveyor to be used. |
|
|
Knee Braces (1 set per level of conveyor) |
|
|
Use in place of LS or MS Supports only. |
|
|
"U" Brackets |
|
|
|
|
|
|
|
|
|
CAPACITY
DATA: |
|
|
Single Width Conveyor Only |
|
|
|
|
1500
lbs........................................per cross pipe |
|
|
|
|
|
|
|
|
|
|
4500
lbs........................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| GUARD RAILS |
|
PACKAGE STOPS |
|
NOTE: Available in 5’ and 10’ lengths only from
Stockyard. Contact us for other lengths. |
|
|
Angle
End Stop |
|
|
|
1-1/2"
x 1-1/2" x 12 Ga. Steel |
|
Adjustable
Universal Channel Guard Rail |
|
|
13"
to 25" Between Rail Width................... |
|
|
|
|
|
|
27"
to 39" Between Rail Width................... |
|
|
Both
Sides ................per foot ........................ |
|
|
|
|
|
|
|
|
|
|
|
One Sides.................
per foot ........................ |
|
|
|
|
|
|
|
|
Angle
Type "A" |
|
|
Raised
Roller End Stop |
|
1-1/2" x
1-1/2" 12 Ga..both sides per foot .... |
|
|
|
2-1/8"
Dia. Roller |
|
|
Angle
Type "B" Integral |
|
|
13"
to 25" Between Rail Width.................. |
|
|
1-1/2"
x 1-1/2" 12 Ga. with Pop-Out Roller
Feature........both sides per foot.............. |
|
|
|
27"
to 39" Between Rail Width.................. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: Available with 3” and 4” roller centers only. |
|
|
Hand
Operated Stop |
|
Fixed
Channel Type - Non-Overlapping (Reversing) (Prices are for both sides) |
|
|
(Blade
or Roller Types, specify) |
|
|
|
|
13"
to 23" Between Rail Width ................. |
|
|
|
|
|
|
25”
to 39” Between Rail Width ................ |
$592.20 |
|
3-1/2"
x 1-1/2" x 12 Ga..........per foot.......... |
|
|
|
|
|
|
|
|
|
|
|
6-1/2" x
1-1/2" x 12 Ga..........per foot.......... |
|
|
|
|
|
|
|
|
10" x 1-1/2"
x 12 Ga..........per foot.............. |
|
|
|
Air
Operated Linear Thruster Stop |
|
|
13" x 1-1/2"
x 12 Ga..........per foot.............. |
|
|
|
(Pin,
Roller or Blade Type. Specify) |
|
|
Fixed
Channel Type - Overlapping (One Direction)
(Prices are both sides) |
|
|
13”
to 39” Between Rail Width................ |
|
|
|
|
|
|
|
|
|
3-1/2" x
1-1/2" x 12 Ga..........per foot.......... |
$25.60 |
|
|
NOTE: Filter Regulator Unit not supplied as standard.
Air Package Stops are supplied in NORMALLY
DOWN position. Can be supplied in Normally
Up position -Specify. |
|
6-1/2" x
1-1/2" x 12 Ga..........per foot.......... |
|
|
|
|
10" x 1-1/2"
x 12 Ga..........per foot.............. |
|
|
|
|
13" x 1-1/2"
x 12 Ga..........per foot.............. |
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: Angle Type and Fixed Channel Guard
Rails are raised with spacer. |
|
|
|
|
|
|
|
|
|
ELECTRICAL CONTROLS |
|
NOTE: If product comes in contact with guard rails,
product flow will be affected. |
|
|
|
(See
below) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TC-250 TRAFFIC COP |
|
|
|
|
|
|
190-NSPS
& NSPSS |
|
 |
|
|
|
|
|
|
|
|
|
190-ACC,
LRS, & LRSS, 190-ACZ |
|
|
|
|
|
|
|
|
|
|
Overall
Frame Width |
16" to 28" |
30" to 42" |
| Price
Each |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The
traffic Cop controls product flow from one conveyor
onto another. It allows products from one line of traffic to
flow freely, without interference from another converging
line of traffic. This eliminates collision of products which
may cause damage and disrupt product flow. Specify
model, width and degree. |
|
|
7 arm widths, aluminum |
|
|
Available in 30°, 45°,
60°, 90° & 180° applications. |
|
|
|
|
Includes mounting
hardware. |
|
|
180° application-10" minimum required between lines |
|
|
5 lbs. Minimum Package Weight
at 65 FPM |
|
|
250 lbs. Maximum Accumulated
Capacity |
|
|
|
|
|
|
|
|
| OPTIONAL
ROLLER CENTERS |
|
Other
than Standard 3". See Chart Below. |
|
| Between Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
| Overall Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
Add Per Foot of Conveyor
2" Centers* |
|
|
|
|
|
|
|
|
|
|
|
|
| Deduct Per Foot of Conveyor 4" Centers* |
-$13.60 |
-$14.50 |
-$15.50 |
-$16.70 |
-$17.80 |
-$19.20 |
-$20.10 |
-$21.20 |
-$23.10 |
-$24.60 |
-$26.60 |
-$27.60 |
| Deduct Per Foot of Conveyor 6" Centers |
-$16.50 |
-$17.90 |
-$19.50 |
-$20.80 |
-$22.10 |
-$23.80 |
-$25.20 |
-$26.60 |
-$29.40 |
-$31.00 |
-$33.80 |
-$35.20 |
|
| NOTE: 4" Centers Not Available on 7'-6" Long Bed Section. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START
SWITCH or
SAFETY DISCONNECT |
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$213.01 |
|
|
|
|
#033.2032
& #033.2072..................$555.67
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$332.11
Nema 4 |
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$854.26 |
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT
SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO
EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER
CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER
CORD WITH PLUG ONLY 20' LONG |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1A |
115/1 |
1/2-3/4 |
|
EA-039-2A |
115/1 |
1 |
|
EA-039-3A |
115/1 |
1
1/2 |
|
EA-039-4A |
230/1 |
1/2-1 |
|
EA-039-5A |
230/1 |
1
1/2-2 |
|
EA-039-6A |
208-230/3 |
1/2-2 |
|
EA-039-7A |
460/3 |
1/2-2 |
|
|
POWER
CORD WITH PLUG 20' LONG WITH MANUAL
START SWITCH AND MOUNTING BRACKET |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1B |
115/1 |
1/2-3/4 |
|
EA-039-2B |
115/1 |
1 |
|
EA-039-3B |
115/1 |
1
1/2 |
|
EA-039-4B |
230/1 |
1/2-1 |
|
EA-039-5B |
230/1 |
1
1/2-2 |
|
EA-039-6B |
208-230/3 |
1/2-2 |
|
EA-039-7B |
460/3 |
1/2-2 |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$118.10 |
|
|
|
|
|
|
|
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
#094.191........................................$691.31
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG.
STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4 |
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one
side.................$7.44 per / ft.
both
sides..............$15.87per
/ ft. |
|
|
|
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$279.61
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113
(100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128
with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37 |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
CONTROLLER
PRICES |
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY |
SINGLE PHASE CONTROLLER INPUT |
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,491.84 |
$1,189.37 |
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,724.27 |
|
| 2 |
N/A |
VSC-12-14 |
| Price |
~ |
|
THREE PHASE CONTROLLER INPUT |
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15 |
VSC-01-18 |
VSC-12-29 |
| Price |
|
|
|
| 1 |
VSC-01-16 |
VSC-01-19 |
VSC-12-29 |
| Price |
|
|
|
| 2 |
VSC-01-17 |
VSC01--20 |
VSC-12-30 |
| Price |
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS |
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT
NOTES... |
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$675.20 |
|
|
|
|
|
|
|
| Brake
Relay Kit (EA-068A).............................. |
$542.68 |
|
|
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.) |
|
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE |
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,058.00 |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$675.20 |
|
|
|
|
|
|
KIT INCLUDES |
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT
NOTES |
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined) |
|
|
|
An International
Electrotechnical Commission (IEC) term that means: “under short
circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use.” The only allowable damage to the starter
is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs. |
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
MOTOR
DUTY |
NON-REVERSING |
REVERSING |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
1/2 |
STANDARD EASY
CLEAN ENERG. EFF. |
|
|
|
|
$1516.60 |
|
|
|
|
$2,023.30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 |
GEARMOTORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
NON-REVERSING |
REVERSING |
NON-REVERSING |
REVERSING |
|
115 VOLT |
PRICE |
115 VOLT |
PRICE |
230 VOLT |
PRICE |
230 VOLT |
PRICE |
1/2 |
|
$1,182.40 |
|
$2,023.30 |
|
$1,435.60 |
|
$2,023.30 |
1 |
|
|
|
|
1-1/2 |
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
| •
Manual Start-Stop Switch Kit |
|
•
Start-Stop Push Button Kit, Remote Mounted |
|
EA-000001 ...................................... |
$242.09 |
|
|
EA-000002....................................... |
$242.09 |
|
Includes:
032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware |
|
|
Includes:
033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware |
|
|
|
|
|
• Forward-Reverse-Stop Push Button Kit,
Remote Mounted |
|
|
|
|
|
|
|
•
Up-Down-Stop Push Button Kit, Remote
Mounted |
|
EA-000003....................................... |
$440.67 |
|
|
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware |
|
|
EA-000004....................................... |
$440.67 |
|
|
|
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
•
“Start-Stop”Push-button Station |
033.1955
|
$211.23 |
|
|
033.195................................................. |
$142.50 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
•
“Fwd-Rev-Stop”Push Button Station |
| 033.1965 |
$397.05 |
|
|
033.196.................................................. |
$490.95 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
OPTIONAL
STARTER CONTROLS |
| 033.1975 |
$397.05 |
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
EA-011
............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$3,210.68 |
|
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES |
|
|
|
• Control Circuit Transformer Included for 115 Volt
Control Voltage.
• Above starters are in Nema 3, 4 and 12 Enclosures.
• The starters included Safety Disconnect, Overload
Relay, and Aux. Contacts as required.
• IF AN ORDER IS SUPPLIED LESS MOTOR,
AND IS SUPPLYING ANY ELECTRICAL
CONTROLS, THEN MOTOR HP, VOLTAGE,
PHASE, AND FULL LOAD CURRENT MUST BE
STATED ON THE ORDER.
• PRICING LISTED IS NOT MOUNTED OR WIRED. |
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
|
|
EA-012
(115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket. |
$3,253.63 |
|
|
$3,391.27 |
|
|
|
| • Add on |
$192.70 |
for
the above Push Buttons |
|
|
|
| to
be Mounted. |
|
|
|
| • Add on |
$995.10 |
for
the above Starters and |
|
|
|
Push
Button Stations to be Mounted and Wired.
Supply 20'0" of cable for push button only. |
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
|
|
|
|
|
|
|
|
#033.2122
B-05165 .............................................. |
|
|
|
|
|
|
|
$118.10 |
|
| CONVEYOR
WEIGHT TABLE |
SIZE TO ORDER
Overall Length
"A" |
Between
Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
| Drive Belt Width |
6" |
6" |
6" |
6" |
6" |
6" |
6" |
6" |
8" |
8" |
8" |
8" |
Overall
Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
| 10' |
WEIGHTS
(Lbs.)
Weights
Based on
3" Roller
Centers |
385 |
416 |
448 |
479 |
509 |
551 |
581 |
612 |
679 |
720 |
771 |
803 |
| 15' |
521 |
552 |
596 |
637 |
679 |
733 |
774 |
816 |
908 |
950 |
1033 |
1077 |
| 20' |
657 |
688 |
744 |
797 |
849 |
915 |
967 |
1020 |
1137 |
1190 |
1295 |
1351 |
| 25' |
793 |
824 |
898 |
956 |
1019 |
1097 |
1160 |
1224 |
1366 |
1430 |
1557 |
1625 |
| 30' |
929 |
960 |
1040 |
1115 |
1189 |
1279 |
1353 |
1428 |
1595 |
1670 |
1819 |
1899 |
| 35' |
1065 |
1096 |
1188 |
1274 |
1359 |
1461 |
1546 |
1632 |
1824 |
1910 |
2081 |
2173 |
| 40' |
1201 |
1232 |
1336 |
1433 |
1529 |
1643 |
1739 |
1836 |
2053 |
2150 |
2343 |
2447 |
| 45' |
1337 |
1368 |
1484 |
1592 |
1699 |
1825 |
1932 |
2040 |
2282 |
2390 |
2605 |
2721 |
| 50' |
1473 |
1504 |
1632 |
1751 |
1869 |
2007 |
2125 |
2244 |
2511 |
2630 |
2867 |
2995 |
| 55' |
1609 |
1640 |
1780 |
1910 |
2039 |
2189 |
2318 |
2448 |
2740 |
2870 |
3129 |
3269 |
| 60' |
1745 |
1776 |
1928 |
2069 |
2209 |
2371 |
2511 |
2652 |
2969 |
3010 |
3391 |
3543 |
| 65' |
1886 |
1912 |
2076 |
2228 |
2379 |
2553 |
2704 |
2856 |
3198 |
3350 |
3653 |
3817 |
| 70' |
2017 |
2048 |
2224 |
2387 |
2549 |
2735 |
2897 |
3060 |
3427 |
3590 |
3915 |
4091 |
| 75' |
2153 |
2184 |
2372 |
2546 |
2719 |
2917 |
3090 |
3264 |
3656 |
3830 |
4177 |
4365 |
| 80' |
2289 |
2320 |
2520 |
2705 |
2889 |
3099 |
3283 |
3468 |
3885 |
4070 |
4439 |
4639 |
| 85' |
2425 |
2456 |
2668 |
2864 |
3059 |
3281 |
3476 |
3672 |
4114 |
4310 |
4701 |
4913 |
| 90' |
2561 |
2592 |
2816 |
3023 |
3229 |
3463 |
3669 |
3876 |
4343 |
4550 |
4963 |
5187 |
| 95' |
2697 |
2728 |
2964 |
3182 |
3399 |
3645 |
3862 |
4080 |
4572 |
4790 |
5225 |
5461 |
| 100' |
2833 |
2864 |
3112 |
3341 |
3569 |
3827 |
4055 |
4284 |
4801 |
5030 |
5487 |
5735 |
|
| All
weights are conveyor weights only. Accessories, crating, etc. are
not included. |
| NOTE:
Bed sections available in multiples of 4 ft., 5 ft., 6 ft., 7-1/2 ft., 8
ft., 9 ft. and 10 ft. lengths only. |
|
Accumulating Conveyor, Conveyor,
Live Roller Conveyors, Powered Live Roller, Power Conveyor, Conveyors,
and Roller Conveyors from your source for material handling equipment. |
Back
to Product Category |
 |
|
