FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

LOCKER ACCESSORIES

LOCK OPTIONS

NOTE: $100.00 minimum order
on all Locker Accessories.
Can be used with all locker handles, and retrofitted to existing installations.
COMBINATION LOCKS
FLAT-KEY LOCKS
Same lock fits all Lyon Lockers
except Personal Effects & Exchange
Master ®. Easy to install and furnished
with two keys.
For use with Tamper Guard
Handles, Single Point Latching
Systems, Recessed Handles
and Pull Handles.
Five combinations per lock
with master key for emergency
access.
Pricing upon request
Pricing upon request

CLOSED BASES FOR LOCKERS WITH 6”H LEGS
Easily add closed bases to our standard steel lockers with 6”h legs.
Closed bases prevent items from rolling beneath the lockers.
FRONT BASES quickly snap into place without tools! Stocks
standard sizes in 1 or 3 packs in Dove Gray and Putty. Front bases
should be ordered to match the width of the locker frame.
END BASES install without tools by sliding into place between the
front and rear legs of the locker. Stocks standard sizes in packs of
2 in Dove Gray and Putty. End bases should be ordered to match the
depth of the locker.

FLOOR ANCHORING SYSTEMS

NOTE: In the interest of safety, we strongly recommend that lockers be floor and/or wall anchored. See below
for important locker anchoring information. For conditions other than outlined below, please contact us.
Anchoring Angle For Lockers Without Legs

Locker Anchoring Angles (running from front to rear
on the inside bottom of the locker) provide a bearing
surface for the fasteners which are connected to the
floor or locker base. For the typical continuous-row
locker installation, order one locker anchoring angle
for each end of a row, plus sufficient quantity to provide
angles on 36" centers. On single-row installations where
backs are against a wall, lockers should be suitably wall
anchored as detailed in assembly instructions packed
with lockers.

When backs are exposed (free-standing) a locker foot is recommended for all locker legs. When backs are against a wall and suitably wall anchored, locker feet are recommended on front legs only. For more details, see assembly instructions packed with lockers.

NOTE: $100.00 minimum order on all
Locker Accessories.
All items on this page must be ordered in package quantities.

NUMBER PLATES
Etched black figures on aluminum plate – 2 3/4"w x 1"h. Same
plates are used on single, double and multiple tier lockers and
on baskets for basket racks. Numbers stocked from 1 to 1000.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


LOCKER ACCESSORIES PRICES
Accessory
Description
Model No.
Pack Size
Price
Galvanized
Anchoring Angle
For 12"D Lockers
1
$102.92
For 15"D Lockers
1
$102.92
For 18"D Lockers
1
$105.50
For 21"D Lockers
1
$121.63
Touch-Up Paint
12oz Spray Can
1
$43.44
Number Plates
Locker Number Plate
1
$1.55
Locker Foot
Galvanized; For Locker Legs
10
$38.25
Flat Key Lock
Flat Key Lock for lockers
1
$15.27
LOCKER BASES PRICES
Base Type
Description
No. of Frames
Model No.
Pack Size
Price
Closed Front Bases
12"W x 6"H
1 Wide
1
$29.23
15"W x 6"H
1 Wide
1
$33.92
18"W x 6"H
1 Wide
1
$36.67
12"W x 6"H
3 Wide
3
$49.66
15"W x 6"H
3 Wide
3
$54.31
18"W x 6"H
3 Wide
3
$61.77
Closed End Bases
12"D x 6"H
-
2
$45.81
15"D x 6"H
-
2
$47.89
18"D x 6"H
-
2
$49.75
SLOPE-TOP KITS
Easily add a sloping top to your existing flat top lockers. Sloping tops
help prevent items from being stacked on top of the lockers and keeps
the area looking tidy.
INDIVIDUAL SLOPE TOP KITS are available to fit over each locker
frame. 1-wide kits include one top and two sloped end panels. 3-wide
kits include three tops, two interim supports, and two end panels.
Not designed for use on expanded metal or welded lockers. NOTE: $100.00 minimum order on all
Locker Accessories.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


SLOPE TOP KIT PRICES
Description
No. of Frames
Model No.
Price
12"W x 12"D
1 Wide
$92.37
3 Wide
$125.55
12"W x 15"D
1 Wide
$94.16
3 Wide
$129.12
12"W x 18"D
1 Wide
$83.13
3 Wide
$128.54
15"W x 15"D
1 Wide
$88.25
3 Wide
$143.86
15"W x 18"D
1 Wide
$132.40
3 Wide
$189.88
18"W x 18"D
1 Wide
$120.54
3 Wide
$195.87

Lyon Locker Accessories, Lock Options, Front Bases, End Bases, Number Plates, Flat-Key Locks, Combination Locks, Flat Top Fillers,
Sloping Top Fillers, Front Expansion Fillers, Slope-Top Kits, Locker Legs, Tamper-Guard Handles, Galvanized Coat Rods, and Coat
Hooks from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart