
 |
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
 |
|
 |
Back to Product Category
MODEL
TS1500-140
|
TRANSNORM BELT CURVE
CONVEYOR
|
 |
|
|
|
|
The
Model TS1500-140 provides a positive flow of
products by means of a belt, driven by tapered pulleys.
Conveyor is versatile in that it can transport a wide
variety of products. Available in 45°,60°, 90°, and 180°
turns. Other degrees available. Contact Us. |
|
|
|
|
|
20 Belt Widths
Adjustable FSK-Type Floor Supports Available
Clipper Lacing
F.O.B. Arlington, Texas |
|
|
|
|
|
|
|
 |
|
STANDARD
SPECIFICATIONS |
|
|
|
BELT - Black Rough Top (Inverted Pyramid) Self
Extinguishing Belt with Guide Strip |
|
MOTOR - 3/4 HP Shaft Mounted Right Angle
Gearmotor 208/230/460/575V-3Ph. 60 Hz
(Specify Exact Voltage). |
|
|
FRAME - 9.45 in. deep x 40 mm x 40 mm aluminum
extrusion. |
|
|
|
|
BELT
SPEED - Constant 65 FPM at center line of
conveying surface. |
|
|
PULLEYS
- Tapered with 1-7/16 in. dia. shaft through
bearings. Adjustable to control belt tension. |
|
|
|
|
CAPACITY - Maximum load per linear foot (measured
at center line of conveying surface) 40 lbs. |
|
|
BEARINGS - Sealed, pre-lubricated, self-aligning, ball
bearings on drive and tail pulley. Re-lube type. |
|
|
|
|
FLOOR
SUPPORTS - Now supplied as optional
equipment. See chart below for available elevations. |
|
|
|
|
|
OPTIONAL
EQUIPMENT |
|
|
|
FLOOR
SUPPORTS - FSK Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. Supports required at each
end and in the center of the conveyor. Holes in feet
for lagging to floor. Knee braces recommended above
FSK-6 support. (See prices below) |
|
BELTS -
Types and styles other than standard are
available (contact us) |
|
|
|
CEILING HANGERS - Includes mouting brackets
and cross pipes only. |
|
|
|
GUARD
RAILS - 3 in. to 24 in. tall available for all
sizes. |
|
|
BELT
SPEED - Up to 250 FPM (shaft mounted), 251 -
600 FPM (timing belt),
NOTE: Capacity affected with speed change, see
chart above. Higher speeds available, contact factory. |
|
|
|
|
ELECTRICAL
CONTROLS - Non-reversing
magnetic starters and push-button stations. AC variable
frequency drive. (See price below) |
|
|
|
DRIVE
LOCATION - Specify |
|
|
|
CUSTOM
COLORS - Available (contact us). Paint
chip must be provided. |
|
|
MOTORS - Other HP available, 5 HP maximum
(contact us) |
|
|
|
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
|
Black Rough Top (Inverted
Pyramid) Self Extinguishing
Belt with Guide Strip
9.45 Deep x 40 mm Aluminum Extrusion
3/4 HPShaft Mounted Right Angle Gearmotor 230/460/575-3Ph.60
Hz (Specify Exact Voltage) |
|
Totally Enclosed Guard
65 FPM Belt Speed
Hytrol Green Paint
Less Electrical Controls
Less Floor Supports |
|
|
|
|
|
IMPORTANT
NOTES... |
To Order Replacement Parts or Spare Parts, Contact Transnorm Directly. Below
Prices Do Not Apply for any
parts ordered independent of a curve.
Two week lead time is for 65 FPM constant speed only
Motor Drive Chain Guard Location Standard on Outside Radius, May
Be on Inside Radius (Specify).
Drive must be located on the discharge end.
Please Provide Sketch With Order.
Items in Black will ship in Two Weeks.
Base Price Does Not Include Supports.
F.O.B. Arlington, Texas. |
|
|
|
|
PRICES |
Conveying Surface Width |
11" |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
29" |
Overall Frame Width |
16-1/2" |
18-1/2" |
20-1/2" |
22-1/2" |
24-1/2" |
26-1/2" |
28-1/2" |
30-1/2" |
32-1/2" |
34-1/2" |
45° |
|
|
|
|
|
|
|
|
|
|
60° |
|
|
|
|
|
|
|
|
|
|
90° |
|
|
|
|
|
|
|
|
|
|
180° |
|
|
|
|
|
|
|
|
|
|
Conveying Surface Width |
31" |
33" |
35" |
37" |
39" |
41" |
43" |
45" |
47" |
49" |
Overall Frame Width |
36-1/2" |
38-1/2" |
40-1/2" |
42-1/2" |
44-1/2" |
46-1/2" |
48-1/2" |
50-1/2" |
52-1/2" |
54-1/2" |
45° |
|
|
|
|
|
|
|
|
|
|
60° |
|
|
|
|
|
|
|
|
|
|
90° |
|
|
|
|
|
|
|
|
|
|
180° |
|
|
|
|
|
|
|
|
|
|
|
*
Refer to the bottom of the page for conveyor weights. |
|
|
|
|
PRICES
FOR OPTIONAL EQUIPMENT |
|
|
|
MOTORS |
|
GUARD
RAILS |
|
|
SOLID SIDE GUARD
RAILS INSIDE ONLY |
45° |
60° |
90° |
180° |
HT. |
OAW |
3" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
4" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
6" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
12" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
21" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
24" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
3" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
4" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
6" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
12" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2 |
|
|
|
|
21" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
24" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
|
Add-On Motor Price for OTHER THAN: 3/4HP-
208/230/460/575 V-3Ph.-60 Hz.-Shalft Mounted Right
Angle Gearmotor. |
|
H.P.
REQ. |
SHAFT MOUNTED AC
GEARMOTOR |
INLINE FOOT MOUNTED
AC GEARMOTOR
W/TIMING BELT |
208/230/460/575 V
3Ph.-60Hz. |
208/230/460/575 V
3Ph.-60Hz. |
3/4 |
|
|
1 |
|
|
1-1/2 |
|
|
2 |
|
|
3 |
|
|
5 |
|
|
|
|
Up to 350 FPM (shaft-mounted), 351 FPM to
600 FPM (timing belt).
A Soft Start Device Is Recommended With 3 & 5 HP
Drive. |
|
|
|
FLOOR
SUPPORTS |
|
Prices
in "FSK chart" below includes all necessary
supports and bracing for conveyor. |
|
"FSK"
SUPPORT |
|
Model
No. |
OAW |
Adjustment
to Top
of Belt |
Price Per Set |
45° |
60° |
90° |
180° |
FSK-1 |
16-1/2"
to
24-1/2" |
8-1/2" - 24" |
|
|
|
|
FSK-2 |
24" - 30" |
|
|
|
|
FSK-3 |
30" - 36" |
|
|
|
|
FSK-4 |
36" - 42" |
|
|
|
|
FSK-5 |
42" - 48" |
|
|
|
|
FSK-6 |
48" - 54" |
|
|
|
|
FSK-1 |
26-1/2"
to
30-1/2" |
9-1/2" - 24" |
|
|
|
|
FSK-2 |
24" - 30" |
|
|
|
|
FSK-3 |
30" - 36" |
|
|
|
|
FSK-4 |
36" - 42" |
|
|
|
|
FSK-5 |
42" - 48" |
|
|
|
|
FSK-6 |
48" - 54" |
|
|
|
|
FSK-1 |
32-1/2"
to
42-1/2" |
9-1/2" - 24" |
|
|
|
|
FSK-2 |
24" - 30" |
|
|
|
|
FSK-3 |
30" - 36" |
|
|
|
|
FSK-4 |
36" - 42" |
|
|
|
|
FSK-5 |
42" -48" |
|
|
|
|
FSK-6 |
48" - 54" |
|
|
|
|
FSK-1 |
44-1/2"
to
54-1/2" |
9-1/2" - 24" |
|
|
|
|
FSK-2 |
24" - 30" |
|
|
|
|
FSK-3 |
30" - 36" |
|
|
|
|
FSK-4 |
36" - 42" |
|
|
|
|
FSK-5 |
42" -48" |
|
|
|
|
FSK-6 |
48" - 54" |
|
|
|
|
|
|
|
|
|
SOLID SIDE GUARD
RAILS OUTSIDE ONLY |
45° |
60° |
90° |
180° |
HT. |
OAW |
3" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
4" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
6" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
12" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
21" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
24" |
16-1/2"-22-1/2" |
|
|
|
|
24-1/2" |
|
|
|
|
3" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
4" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
6" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
12" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2 |
|
|
|
|
21" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
24" |
26-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
|
For
elevations above 54, contact us. |
|
|
|
CEILING
HANGERS |
|
Includes
Mounting Brackets and Cross Pipes Only. |
|
OAW |
PRICE PER SET |
45° |
60° |
90° |
180° |
16-1/2"-42-1/2" |
|
|
|
|
44-1/2"-54-1/2" |
|
|
|
|
|
|
|
|
CUSTOM
COLORS |
|
Available
(contact us). Paint chip must be provided. |
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
BELTS |
BELT |
16-1/2"
- 22-1/2" |
24-1/2" |
45° |
60° |
90° |
180° |
45° |
60° |
90° |
180° |
White Urethane (High Friction) (FDA) |
|
|
|
|
|
|
|
|
White Urethane (Low Friction) (FDA) |
|
|
|
|
|
|
|
|
BELT |
26-1/2"
- 42-1/2" |
44-1/2"-54-1/2" |
45° |
60° |
90° |
180° |
45° |
60° |
90° |
180° |
White Urethane (High Friction) (FDA) |
|
|
|
|
|
|
|
|
White Urethane (Low Friction) (FDA) |
|
|
|
|
|
|
|
|
|
|
|
|
|
INVERTERS |
|
CASTERS |
SEW Eurodrive MC07 AC Inverters |
VOLTAGE |
HP |
Price |
|
VOLTAGE |
HP |
Price |
200-240 |
3/4 |
|
|
380-500 |
3/4 |
|
1 |
|
|
1 |
|
1-1/2 |
|
|
1-1/2 |
|
3 Ph |
2 |
|
|
3 Ph |
2 |
|
3 |
|
|
3 |
|
|
Baldor VSC AC Inverters |
VOLTAGE |
HP |
Price |
|
VOLTAGE |
HP |
Price |
200/208/
230 |
3/4 |
|
|
460 |
3/4 |
|
1 |
|
|
1 |
|
1-1/2 |
|
|
1-1/2 |
|
3 Ph |
2 |
|
|
3 Ph |
2 |
|
3 |
|
|
3 |
|
5 |
|
|
5 |
|
|
|
4"
DIA. RUBBER SWIVEL CASTERS WITH BRAKES |
Conveying Surface |
11"- 19" |
21"- 37" |
39"- 49" |
Belt Width |
10"- 18" |
20"- 36" |
38"- 48" |
Overall Frame Width |
16-1/2" -24-1/2" |
26-1/2"
-42-1/2" |
44-1/2" -54-1/2" |
45° |
|
|
|
60° |
|
|
|
90° |
|
|
|
180° |
|
|
|
|
|
|
Note:
Input voltage must be specified at time of order. Inverter
will be wired to conveyor motor with 10' lead. Contact us for
Inverters for 5 HP motors. |
|
|
|
CONVEYOR
WEIGHT TABLE |
Belt Conveyors, Conveyor,
Conveyor Belt, Low Profile Conveyor, Conveyors, Slider Bed, and Transnorm
Belt Curve Conveyor from your source for material handling equipment. |
OAW Frame |
Conveying Surface Width |
Belt Width |
"IR" |
"CL" Radius (CS) |
"OR" |
45° Weight (Lbs.) |
60° Weight (Lbs.) |
90° Weight (Lbs.) |
180° Weight (Lbs.) |
16-1/2" |
11" |
10" |
34" |
39-1/2" |
45" |
361 |
386 |
411 |
552 |
18-1/2" |
13" |
12" |
32" |
38-1/2" |
365 |
390 |
414 |
567 |
20-1/2" |
15" |
14" |
30" |
37-1/2" |
365 |
390 |
415 |
572 |
22-1/2" |
17" |
16" |
28" |
36-1/2" |
367 |
392 |
417 |
577 |
24-1/2" |
19" |
18" |
26" |
35-1/2" |
369 |
394 |
419 |
581 |
26-1/2" |
21" |
20" |
36" |
46-1/2" |
57" |
380 |
423 |
466 |
626 |
28-1/2" |
23" |
22" |
34" |
45-1/2" |
388 |
438 |
487 |
659 |
30-1/2" |
25" |
24" |
32" |
44-1/2" |
390 |
440 |
490 |
665 |
32-1/2" |
27" |
26" |
54" |
67-1/2" |
81" |
426 |
520 |
591 |
868 |
34-1/2" |
29" |
28" |
52" |
66-1/2" |
428 |
524 |
596 |
877 |
36-1/2" |
31" |
30" |
50" |
65-1/2" |
431 |
530 |
601 |
887 |
38-1/2" |
33" |
32" |
48" |
64-1/2" |
434 |
533 |
606 |
896 |
40-1/2" |
35" |
34" |
46" |
63-1/2" |
437 |
538 |
611 |
905 |
42-1/2" |
37" |
36" |
44" |
62-1/2" |
439 |
542 |
616 |
913 |
44-1/2" |
39" |
38" |
66" |
85-1/2" |
105" |
481 |
621 |
706 |
1103 |
46-1/2" |
41" |
40" |
64" |
84-1/2" |
485 |
627 |
713 |
1116 |
48-1/2" |
43" |
42" |
62" |
83-1/2" |
488 |
633 |
720 |
1129 |
50-1/2" |
45" |
44" |
60" |
82-1/2" |
491 |
639 |
726 |
1141 |
52-1/2" |
47" |
46" |
58" |
81-1/2" |
494 |
644 |
732 |
1152 |
54-1/2" |
49" |
48" |
56" |
80-1/2" |
497 |
649 |
738 |
1164 |
|
|
Belt Conveyors, Conveyor,
Conveyor Belt, Low Profile Conveyor, Conveyors, Slider Bed, and Transnorm
Belt Curve Conveyor
from your source for material handling equipment. |
Back
to Product Category |
 |
|