
 |
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
 |
|
 |
Back to Product Category
MODEL
SBI
|
|
FLOOR-TO-FLOOR INCLINE
CONVEYOR (SLIDER BED)
|
|
|
The
Model SBI is a floor-to-floor incline
conveyor. It is equipped with an
adjustable double nose-over at the
discharge end to insure a smooth transfer
from the incline to horizontal plane.
Inclines are easily adjusted up to 30°.
This conveyor can also be used as a
booster conveyor in gravity flow systems |
|
 |
|
|
|
|
|
12 Belt Widths
Center Drive
Reversible
Brake
Motor
System
Ends
Double
Nose-over
Pop-out
Roller
Powered
Feeder
Ceiling
Hangers Available
Adjustable
MS-Type Floor Supports
Available
Undertrussing (18", 24", & 30" OAW
from Stockyard Only |
|
|
|
|
SEE
BOTTOM OF PAGE FOR INCLINE LIFT GUIDE POWERED
BELT CONVEYORS |
|
|
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
 |
|
|
|
|
|
STANDARD
SPECIFICATIONS |
|
|
|
|
|
BELT - Black Trackmate 120 Roughtop with PVC
cover. Clipper unibar lacing. |
|
TAIL
PULLEY - 4 in. dia. with 1 in. dia. shaft at
bearings or 6 in. dia. with 1-3/16 in. dia. shaft at
bearings, machine crowned. |
|
|
|
BED - 12 ga. galvanized slider pan mounted in 6-1/2
in. x 12 ga. powder painted, formed steel channel frame.
Standard 4 ft., 6 ft., 8 ft. and 10 ft. long sections bolt
together with splice plates. |
|
|
|
|
|
|
TAKE-UP - Take-ups in center drive provides 16 in.
of belt take-up. |
|
|
|
|
|
SNUB
IDLER/NOSE-OVER ROLLERS -
Adjustable 2-1/8 in. dia. or 2-1/2 in. dia. pre-
lubricated ball bearings. Snub guards included. |
|
|
|
|
DOUBLE
NOSE-OVER - A 26 in. long horizontal
and a 12 in. long nose-over section provides a two-step
transition of product from incline to horizontal. Provides
up to 30° incline adjustment. |
|
|
|
|
|
|
|
RETURN
IDLER - Adjustable 1.9 in. dia., pre-
lubricated ball bearings. |
|
|
|
|
FLOOR
SUPPORTS - Now supplied as optional
equipment. |
|
|
|
|
|
BEARINGS - Sealed, pre-lubricated, self-aligning,
ball bearings on drive, tail and take-up pulley. |
|
|
|
|
LOWER
POWERED FEEDER - Chain type driven
from tail pulley of inclined conveyor. Supports not
included in base price. |
|
|
|
|
|
SPEED REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley. |
|
|
|
|
|
MOTOR - 1 HP-208/230/460/575V-3 Ph. 60 Hz.
Totally Enclosed C-Face "SSB" brake motor (6 ft./lb.). |
|
|
|
|
CENTER
DRIVE - Located on the incline section.
Chain guard located on left hand side. |
|
|
|
|
|
|
|
BELT
SPEED - Constant 65 FPM. |
|
|
|
|
DRIVE
PULLEY - 8 in. dia. with 1-7/16 in. dia.
shaft at bearings, machine crowned and fully lagged. |
|
|
|
|
CAPACITY - Maximum load per linear foot of
conveyor 100 lbs. NOT TO EXCEED capacity in chart. |
|
|
|
|
TAKE-UP
PULLEY - 6 in. dia. with 1 3/16 in. dia.
shaft at bearings, machine crowned. |
|
|
|
|
|
|
|
|
|
|
|
|
BR |
BELT
WIDTH |
OAW |
FEEDER
LENGTH |
13" |
10" |
16" |
35 1/2" |
15" |
12" |
18" |
17" |
14" |
20" |
50 1/2" |
19" |
16" |
22" |
21" |
18" |
24" |
23" |
20" |
26" |
25" |
22" |
28" |
27" |
24" |
30" |
67 1/2" |
31" |
28" |
34" |
79 1/2" |
33" |
30" |
36" |
37" |
34" |
40" |
91 1/2" |
39" |
36" |
42" |
|
|
LOAD CAPACITY CHART 25° INCLINE @ 65 FPM
W/ROUGHTOP BELT |
HP |
BELT WIDTHS TO |
LENGTHS UP TO |
14' |
44' |
DISTRIBUTED LOAD (LBS.) |
1 |
22" |
390 |
375 |
30" |
380 |
355 |
36" |
375 |
340 |
2 |
22" |
810 |
790 |
30" |
800 |
770 |
36" |
790 |
755 |
|
|
|
|
|
|
|
|
|
OPTIONAL
EQUIPMENT |
|
|
|
|
|
|
FLOOR
SUPPORTSMS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended
above MS-3 support. |
|
|
GUARD
RAILS - Adjustable Universal Channel,
Guard Rail, overlapping fixed channel (one direction),
non-overlapping fixed channel (bi-directional). |
|
|
|
|
|
|
|
PULLEYS - 6 in. dia. tail pulley with 1-3/16 in. dia.
shaft at bearings in place of 4 in. when not furnished as
standard. |
|
|
|
|
|
BELT - Brown Polymate Roughtop w/Nitrile cover,
Pure Gum Rubber Roughtop. |
|
|
|
|
|
CEILING
HANGERS5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and
galvanized rods available. |
|
|
|
BELT
SPEED - Other constant and variable speeds
V-belt drive supplied on speeds under 20 FPM
(1HP), 46 FPM (2 HP). NOTE: Capacity
affected with speed change. |
|
|
|
|
|
|
UNDERTRUSSING - Available in place of ceiling
hangers. Maximum bed length 40 ft. Maximum overall
width 30 in. |
|
|
|
|
|
V-BELT
DRIVE - V-belt supplied between motor
and reducer. Allow 65 in. |
|
|
|
|
|
|
MOTORS - Energy efficient, single phase, other
characteristics. 2 HP maximum. |
|
|
|
|
O-RING
DRIVE CHAINWith sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
|
|
|
|
|
ELECTRICAL
CONTROLS - Non-reversing and
reversible magnetic starters and push button stations.
AC variable frequency drive. |
|
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
|
|
|
PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
|
*
Black Trackmate 120 Roughtop with PVC Cover |
|
* Totally Enclosed
Chain Guard |
|
|
|
|
*
12 Ga. Galvanized Slider Pan Mounted in a 6-1/2" x
12 Ga. Channel frame |
|
* 65 FPM Constant
Belt Speed |
|
|
|
*
System Ends |
|
|
|
*
Double Noseover (25° Maximum Incline located
2 ft. 2 in. from Discharge End) |
|
|
|
|
* Standard Powered
Feeder |
|
|
|
*
Less Electrical Controls |
|
|
|
*
"C" Face Speed Reducer - Sealed Worm Gear |
|
|
|
|
*
Less Supports |
|
|
|
|
*
1 HPC Face Totally Enclosed SSB Brake
Motor 208/230/460/575 Volt 3 Ph.-60 Hz.
(Specify Exact Voltage) |
|
|
|
|
|
|
|
|
SIZE TO ORDER Overall Length |
Bed
Length
"L" |
Belt Widths |
Overall
Length
"A" 6"
Dia. |
Belt Widths |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
28" |
30" |
34" |
36" |
Overall Frame Widths |
Overall Frame Widths |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
13'-10" |
10' |
$6,452 |
$6,605 |
$6,758 |
$6,912 |
$7,065 |
$7,217 |
$7,370 |
14'-0" |
$7,791 |
$8,098 |
$8,251 |
$8,557 |
$8,710 |
15'-10" |
12' |
$6,592 |
$6,757 |
$6,922 |
$7,087 |
$7,252 |
$7,418 |
$7,583 |
16'-0" |
$8,017 |
$8,347 |
$8,512 |
$8,842 |
$9,007 |
17'-10" |
14' |
$6,732 |
$6,909 |
$7,086 |
$7,263 |
$7,441 |
$7,618 |
$7,795 |
18'-0" |
$8,241 |
$8,594 |
$8,771 |
$9,126 |
$9,303 |
19'-10" |
16' |
$6,873 |
$7,061 |
$7,250 |
$7,440 |
$7,629 |
$7,819 |
$8,007 |
20'-0" |
$8,465 |
$8,843 |
$9,032 |
$9,411 |
$9,600 |
21'-10" |
18' |
$7,012 |
$7,214 |
$7,415 |
$7,616 |
$7,817 |
$8,019 |
$8,219 |
22'-0" |
$8,689 |
$9,092 |
$9,293 |
$9,696 |
$9,896 |
23'-10" |
20' |
$7,152 |
$7,366 |
$7,579 |
$7,793 |
$8,006 |
$8,218 |
$8,432 |
24'-0" |
$8,913 |
$9,340 |
$9,553 |
$9,980 |
$10,194 |
25'-10" |
22' |
$7,293 |
$7,518 |
$7,743 |
$7,968 |
$8,194 |
$8,419 |
$8,644 |
26'-0" |
$9,138 |
$9,589 |
$9,814 |
$10,264 |
$10,490 |
27'-10" |
24' |
$7,433 |
$7,670 |
$7,907 |
$8,144 |
$8,382 |
$8,619 |
$8,856 |
28'-0" |
$9,362 |
$9,837 |
$10,074 |
$10,549 |
$10,787 |
29'-10" |
26' |
$7,572 |
$7,822 |
$8,071 |
$8,321 |
$8,570 |
$8,820 |
$9,069 |
30'-0" |
$9,586 |
$10,085 |
$10,335 |
$10,834 |
$11,083 |
31'-10" |
28' |
$7,712 |
$7,974 |
$8,236 |
$8,497 |
$8,758 |
$9,020 |
$9,281 |
32'-0" |
$9,810 |
$10,334 |
$10,596 |
$11,118 |
$11,380 |
33'-10" |
30' |
$7,853 |
$8,126 |
$8,400 |
$8,673 |
$8,947 |
$9,219 |
$9,493 |
34'-0" |
$10,036 |
$10,583 |
$10,855 |
$11,402 |
$11,676 |
35'-10" |
32' |
$7,993 |
$8,278 |
$8,564 |
$8,849 |
$9,135 |
$9,420 |
$9,705 |
36'-0" |
$10,260 |
$10,830 |
$11,116 |
$11,688 |
$11,973 |
37'-10" |
34' |
$8,132 |
$8,431 |
$8,728 |
$9,025 |
$9,323 |
$9,620 |
$9,918 |
38'-0" |
$10,484 |
$11,079 |
$11,376 |
$11,972 |
$12,269 |
39'-10" |
36' |
$8,273 |
$8,583 |
$8,892 |
$9,202 |
$9,511 |
$9,821 |
$10,130 |
40'-0" |
$10,708 |
$11,328 |
$11,637 |
$12,256 |
$12,566 |
41'-10" |
38' |
$8,413 |
$8,735 |
$9,056 |
$9,378 |
$9,699 |
$10,021 |
$10,343 |
42'-0" |
$10,933 |
$11,576 |
$11,898 |
$12,540 |
$12,862 |
43'-10" |
40' |
$8,553 |
$8,887 |
$9,221 |
$9,554 |
$9,888 |
$10,222 |
$10,556 |
44'-0" |
$11,157 |
$11,824 |
$12,158 |
$12,826 |
$13,159 |
Per Foot Price |
$70.05 |
$76.06 |
$82.08 |
$88.09 |
$94.11 |
$100.12 |
$106.13 |
|
$112.15 |
$124.18 |
$130.19 |
$142.34 |
$148.35 |
|
|
IMPORTANT
NOTES |
|
OTHER LENGTHS
Other lengths not listed in price chart are available. For "IN-BETWEEN
SIZES", use next larger Overall Length "A" price. For lengths
longer or shorter than those shown in chart, please contact us.
OTHER WIDTHS
For "IN-BETWEEN WIDTHS", use next width plus 10%. For
widths over 42" OAW, contact us.
INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included.
FLOOR SUPPORTS
Floor Supports are not included in base price.
There are two (2) stationary floor supports required for the first bed
section and one (1) support required per bed section thereafter.
NON-STANDARD WIDTHS
Contact us for lead time. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR OPTIONAL EQUIPMENT |
|
|
|
|
|
|
|
|
|
|
|
|
OPTIONAL
DRIVES |
|
|
|
|
OPTIONAL
BELTS |
Unified
Drives: (Shaft Mounted) |
|
|
|
|
Extra
Price Per foot Conveyor Length "A" (in addition
to Black Trackmate 120 Roughtop with PVC Cover
regularly finished). See chart Below. |
Unified Drives: |
OVERALL
FRAME WIDTH |
16" to 28" |
30" to 42" |
Center Drive 8 Drive Pulley with
075 Reducer |
|
|
Center Drive 8 Drive Pulley with
090 Reducer |
|
|
|
|
|
|
|
|
|
|
|
|
8
Drive Pulley |
|
|
|
|
Speed FPM |
65 |
78 |
97 |
130 |
156 |
195 |
260 |
389 |
Max HP |
1 |
1.2* |
1 |
2 |
2 |
2 |
2 |
2** |
|
|
|
|
|
*
Reducer size increases with 2 HP.
**Contact us. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CONSTANT
AND VARIABLE SPEEDS |
|
|
|
Constant
C-Face--Within 17-135 FPM... |
No
Charge |
|
|
|
|
Constant
V-Belt--Minimum of 7 FPM with a 1 HP |
|
|
|
motor
requires 5A Reducer and V-Belt Drive ....... |
|
|
|
|
..............................................Add
On ... |
|
|
|
|
Constant
Speeds Below Those Listed Above ......... |
|
|
|
.............................................................
Contact us |
|
|
|
|
|
|
|
|
|
|
|
|
|
DRIVE
COMPONENT DEDUCTS |
|
|
|
Less
Motor Drive, Motor Mount and Guards, |
|
|
|
but
with Shaft Extension...Deduct............. |
$702.70 |
|
|
|
|
Less
Brake Motor (1 HP-208/230/
460/575V-3Ph.-60 Hz.)............Deduct...... |
|
|
|
|
|
|
$379.10 |
|
|
|
*Less
Reducer......Deduct......................... |
$215.30 |
|
|
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
#50
O-Ring Drive Chain ............Add ........ |
|
|
|
|
#60
O-Ring Drive Chain ............Add ........ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#50
O-Ring Chain on Feeder Slave Connection |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LARGER
TAIL PULLEY |
.................................................Add
......... |
|
|
|
|
|
|
|
|
|
6"
dia. Tail Pulley in place of 4" dia. when not furnished |
#60
O-Ring Chain on Feeder Slave Connection |
|
|
|
|
|
|
|
|
as
standard............................................. |
|
.................................................Add
......... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GALVANIZING |
|
|
|
|
|
|
|
GUARD
RAILS |
|
|
|
|
|
|
|
Contact
us. |
|
Adjustable
Universal Channel Type Guard Rail |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Both
Side..................per foot...................
One Side...................per foot.................. |
|
|
|
ELECTRICAL
CONTROLS |
|
|
|
(See
bottom of page) |
Overlapping
Fixed Channel Type (One Direction) |
|
|
|
|
|
|
|
|
|
|
Prices
are for Both Sides
3-1/2" x 1-1/2" x 12 Ga....per foot............
6-1/2" x 1-1/2" x 12 Ga....per foot............
10" x 1-1/2" x 12 Ga.........per foot...........
13" x 1-1/2" x 12 Ga.........per foot........... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$24.17 |
|
|
|
|
|
|
|
|
|
$32.19 |
|
UNDERTRUSSING
(MAX. 30" OAW) |
|
|
|
|
|
See
drawing below to select the undertrussing
you want. |
|
Non-Overlapping
Fixed Channel Type
(Bi-Directional) |
|
|
|
|
|
|
Undertrussing
Kit Assembly (A) .....Ea..... |
|
|
Prices
are for Both Sides
3-1/2" x 1-1/2" x 12 Ga....per foot............
6-1/2" x 1-1/2" x 12 Ga....per foot............
10" x 1-1/2" x 12 Ga.........per foot...........
13" x 1-1/2" x 12 Ga.........per foot........... |
|
|
|
|
Undertrussing
Kit Assembly (B) .....Ea..... |
|
|
|
|
|
Undertrussing
Kit Assembly (C) .....Ea..... |
|
|
$20.17 |
|
|
NOTE: Specify quantity each. |
|
$28.42 |
|
|
|
NOTE: Undertrussing not recommended for units
over 40 bed length, floor supports required. |
|
$34.32 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
MOTORS |
|
Extra
Motor Price for OTHER THAN: 1 HP208/230/460/575 V3 Ph.60
Hz.Totally Enclosed. Speed affects horsepower requirements. |
|
|
|
FLOOR
SUPPORTS |
|
VARIABLE
SPEED BRAKE MOTOR DRIVES |
Not
Included in Base Price. Use Chart Below for
Required Elevation. |
|
(SPROCKET
DRIVEN) |
|
|
|
AC
VARIABLE SPEED DRIVES (ALL
MOTORS ARE ENERGY EFFICIENT 3 PHASE) |
|
|
"MS"
SUPPORT |
|
Model No. |
Adjustment
to Top of Belt |
Price Each |
MSL-1 |
9-1/16"
to 10-1/16" |
$43.51 |
MSL-2 |
10-1/16"
to 11-13/16" |
$43.51 |
MSL-3 |
11-13/16"
to 14-7/16" |
$43.51 |
MS-1 |
14-1/16"
to 15-13/16 |
$43.51 |
MS-1.2 |
15-1/16"
to 16-13/16" |
$43.51 |
MS-1.4 |
16-1/16"
to 17-13/16" |
$43.51 |
MS-2 |
17-1/16"
to 20-1/16" |
$44.93 |
MS-3 |
19-11/16"
to 22-11/16" |
$71.23 |
MS-4 |
22-11/16"
to 28-11/16" |
$78.77 |
MS-5 |
26-11/16"
to 32-11/16" |
$81.13 |
MS-6 |
30-11/16"
to 42-11/16" |
$87.27 |
MS-7 |
40-11/16"
to 52-11/16" |
$96.82 |
MS-8 |
52-11/16"
to 64-11/16" |
$110.61 |
MS-9 |
64-11/16"
to 76-11/16" |
$121.11 |
MS-10 |
76-11/16"
to 88-11/16" |
$138.09 |
MS-11 |
86-11/16"
to 98-11/16" |
$152.71 |
MS-12 |
98-11/16"
to 110-11/16" |
$159.79 |
|
|
|
SINGLE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208 VOLT |
ADD ON PRICE
230 VOLT |
1 |
VSC-11
|
VSC-13
|
VSC-13 |
$2,271 |
$2,034 |
$2,034 |
2 |
N/A |
VSC-14 |
VSC-14 |
$2,512 |
$2,583 |
THREE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
208 VOLT |
ADD ON PRICE
230 VOLT |
ADD ON PRICE
460 VOLT |
1 |
VSC-16 |
VSC-16 |
VSC-19 |
$2,171 |
$2,096 |
$2,387 |
2 |
VSC-17 |
VSC-17 |
VSC-20 |
$2,646 |
$2,718 |
$2,782 |
|
|
|
|
VARIABLE
SPEED BRAKE MOTOR DRIVES |
|
(TIMING
BELT DRIVEN) |
|
AC
VARIABLE SPEED DRIVES (ALL
MOTORS ARE ENERGY EFFICIENT 3 PHASE) |
|
|
Knee
Braces ...........Add On Per Pair ............................. |
|
|
|
SINGLE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208 VOLT |
ADD ON PRICE
230 VOLT |
1 |
VSC-11
|
VSC-13
|
VSC-13 |
$3,641 |
$3,452 |
$3,452 |
2 |
N/A |
VSC-14 |
VSC-14 |
$3,901 |
$4,047 |
THREE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
208 VOLT |
ADD ON PRICE
230 VOLT |
ADD ON PRICE
460 VOLT |
1 |
VSC-16 |
VSC-16 |
VSC-19 |
$3,532 |
$3,532 |
$3,532 |
2 |
VSC-17 |
VSC-17 |
VSC-20 |
$4,047 |
$4,194 |
$4,194 |
|
Note: MS-3 to MS-12: Knee Braces included in price. |
|
|
|
|
|
|
|
|
|
CEILING
HANGERS |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8 dia. x |
|
8-0
long unplated fully threaded rods..... |
|
|
Ceiling
Hanger Brackets with (2) 5/8 dia. x
8-0 long galvanized fully threaded rods.... |
|
|
|
|
|
Mount
and Wire Controller.............................. |
Ceiling
Hanger Brackets with (2) 5/8 dia.
x 10-0 long unplated fully threaded rods..... |
|
|
|
...............................Add-on.......................... |
|
$157.90 |
|
NOTE
#1: Add on price includes standard brake
motor deduct.
NOTE #2: Add On Price includes 5AC reducer
upgrade.
NOTE #3: All above V/S Drive Kits include NEMA
1/ IP30 Junction Box, Controller, EA-068A Brake
Control Kit and Brake Motor, and either #60
Chain with Taper Lock Sprockets OR Timing Belt,
Sprockets and Belt.
NOTE #4: Good for cycle rates of up to 15 cycles
per minute, at 1/2 second ramp time, with a
maximum speed of 250 FPM. |
Ceiling
Hanger Brackets with (2) 5/8 dia.
x 10-0 long galvanized fully threaded rods.... |
|
|
|
$259.79 |
|
Ceiling
Hanger Brackets with (2) 5/8 dia.
x 12-0 long unplated fully threaded rods..... |
|
|
|
$262.15 |
|
Ceiling
Hanger Brackets with (2) 5/8 dia.
x 12-0 long galvanized fully threaded rods.... |
|
|
|
$303.19 |
|
Ceiling
Hanger Brackets, Less Rods Only... |
|
|
Extra
Length Rods: |
|
(2)
8-0 long x 5/8 dia. unplated fully
threaded rods ......................................... |
|
|
|
|
|
(2)
8-0 long x 5/8 dia. galvanized fully
threaded rods ....................................... |
|
|
|
|
|
|
|
(2)
10-0 long x 5/8 dia. unplated fully
threaded rods ...................................... |
|
|
|
|
|
|
|
|
|
(2)
10-0 long x 5/8 dia. galvanized fully
threaded rods ..................................... |
|
|
|
|
|
|
|
|
|
(2)
12-0 long x 5/8 dia. unplated fully
threaded rods..................................... |
|
|
|
|
|
|
|
|
|
(2)
12-0 long x 5/8 dia. galvanized fully
threaded rods ................................... |
|
|
|
|
|
|
|
|
|
Hex
Coupling Nuts for Rods .................. |
|
|
|
|
POWER
FEEDER (DEDUCTS) |
Ultimate
140 BBS |
NOTE:
Overall length of 35-1/2 requires one support. Overall length of 50-1/2
or more requires two supports.
Supports not included in base price. |
|
|
Belt Widths |
Chain
Driven Feeder |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
28" |
30" |
34" |
36" |
Min. Length Overall |
35-1/2" |
35-1/2" |
50-1/2" |
50-1/2" |
50-1/2" |
50-1/2" |
50-1/2" |
67-1/2" |
79-1/2" |
79-1/12" |
91-1/2" |
91-1/2" |
Price Per Foot |
|
|
|
|
|
|
|
|
|
|
|
|
*Less Feeder Deduct |
-$1,011 |
-$1,064 |
-$1,233 |
-$1,289 |
-$1,346 |
-$1,402 |
-$1,605 |
-$1,787 |
-$1,974 |
-$2,177 |
-$2,341 |
-$2,627 |
|
*Will
be supplied with rounded end in lieu of feeder. |
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START
SWITCH or
SAFETY DISCONNECT |
|
 |
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
#032.1014......................................... |
$153.89 |
|
|
|
#033.2032
& #033.2072..................$401.54
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
#033.2033&
#033.2072...................$239.98
Nema 4 |
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
#032.103.......................................... |
$617.58 |
|
|
 |
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$148.47
115 Volt AC, two wire with ground, 30mm dia.,
10mm range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT
SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
#032.211.........................................$175.59
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $195.40
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO
EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#033.2122......................................$783.97
115 Volt, relay output, light or dark energized,
and includes Reflector. |
|
POWER
CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DUAL
TIME DELAY MODULE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2172.......................................$252.72
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off) |
POWER
CORD WITH PLUG ONLY 20' LONG |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1A |
115/1 |
1/2-3/4 |
|
EA-039-2A |
115/1 |
1 |
|
EA-039-3A |
115/1 |
1
1/2 |
|
EA-039-4A |
230/1 |
1/2-1 |
|
EA-039-5A |
230/1 |
1
1/2-2 |
|
EA-039-6A |
208-230/3 |
1/2-2 |
|
EA-039-7A |
460/3 |
1/2-2 |
|
|
POWER
CORD WITH PLUG 20' LONG WITH MANUAL
START SWITCH AND MOUNTING BRACKET |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1B |
115/1 |
1/2-3/4 |
|
EA-039-2B |
115/1 |
1 |
|
EA-039-3B |
115/1 |
1
1/2 |
|
EA-039-4B |
230/1 |
1/2-1 |
|
EA-039-5B |
230/1 |
1
1/2-2 |
|
EA-039-6B |
208-230/3 |
1/2-2 |
|
EA-039-7B |
460/3 |
1/2-2 |
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$85.26 |
|
|
|
 |
AIR
PRESSURE SWITCH |
|
#094.191........................................$499.77
Nema 4 |
|
|
|
|
|
|
|
|
|
EMERG.
STOP PULL CORD SWITCH |
|
|
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$539.63
Nema 4 |
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
#032.281...one
side.................$5.42 per / ft.
both
sides..............$10.73 per / ft. |
|
|
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
#032.284..........................................$202.13
Nema 4 |
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
#032.2113
(100mm range, 3.94")....$470.76
#032.2116 (200mm range, 7.87")....$140.21
#033.218 (400mm range, 15.74")....$212.15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
|
|
#033.2128
with 032.21122 Cable.....$375.36
#032.21122 (Cable Only)...................$52.24 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
AC VARIABLE
SPEED DRIVE ADD-ON PRICES |
|
REPLACEMENT
CONTROLLER |
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE) |
SINGLE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208/230 VOLT |
1/2 |
EA-VSC-12-10 |
EA-VSC-12-12 |
Price |
$1,323.61 |
$1,118.41 |
1 |
EA-VSC-12-11 |
EA-VSC-12-13 |
Price |
$1,547.31 |
$1,370.30 |
2 |
N/A |
EA-VSC-12-14 |
Price |
~ |
$2,058.29 |
THREE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
208/230 VOLT |
ADD ON PRICE
460 VOLT |
ADD
ON PRICE
575 VOLT |
1/2 |
EA-VSC-01-15 |
EA-VSC-01-18 |
EA-VSC-12-29 |
Price |
$1,271.36 |
$1,457.92 |
$1,987.77 |
1 |
EA-VSC-01-16 |
EA-VSC-01-19 |
EA-VSC-12-29 |
Price |
$1,448.49 |
$1,629.39 |
$2,032.58 |
2 |
EA-VSC-01-17 |
EA-VSC-01-20 |
EA-VSC-12-30 |
Price |
$2,074.92 |
$2,222.09 |
$2,667.26 |
|
|
|
|
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY |
SINGLE PHASE CONTROLLER INPUT |
Motor Size |
115 Volt |
208/230 Volt |
1/2 |
VSC-12-10 |
VSC-12-12 |
Price |
$1,078.32 |
$859.80 |
1 |
VSC-12-11 |
VSC-12-13 |
Price |
$1,246.48 |
$1,005.56 |
2 |
N/A |
VSC-12-14 |
Price |
~ |
$1,297.07 |
THREE PHASE CONTROLLER INPUT |
Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
1/2 |
VSC-01-15 |
VSC-01-18 |
VSC-12-29 |
Price |
$1,131.27 |
$1,197.31 |
$1,582.34 |
1 |
VSC-01-16 |
VSC-01-19 |
VSC-12-29 |
Price |
$1,142.12 |
$1,297.07 |
$1,582.34 |
2 |
VSC-01-17 |
VSC01--20 |
VSC-12-30 |
Price |
$1,430.33 |
$1,496.72 |
$1,925.50 |
|
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS |
|
|
|
|
|
$502.72 |
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
|
|
|
|
|
|
|
|
|
Brake
Relay Kit (EA-068A).............................. |
$391.40 |
|
|
|
|
|
|
IMPORTANT
NOTES... |
|
|
Add on price includes standard motor deduct.
2 HP Add On Price includes 5AC reducer upgrade.
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
Drawing No. DG-001146. |
|
|
|
|
|
When AC Variabl Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $391.40 for this option.) |
|
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE |
Part No. |
Description |
Price |
EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$3,766.10 |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on . .
(mounted close to the motor) |
$502.72 |
|
|
|
|
|
|
KIT INCLUDES |
|
|
|
Part No. |
Description |
VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT
NOTES |
|
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
Sprockets |
Part No. |
Description |
VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined) |
|
|
|
An International
Electrotechnical Commission (IEC) term that means: under short
circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use. The only allowable damage to the starter
is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs. |
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
MOTOR
DUTY |
NON-REVERSING |
REVERSING |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
1/2 |
STANDARD EASY
CLEAN ENERG. EFF. |
|
|
|
|
$1,096.36 |
|
|
|
|
$1,462.64 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 |
GEARMOTORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
NON-REVERSING |
REVERSING |
NON-REVERSING |
REVERSING |
|
115 VOLT |
PRICE |
115 VOLT |
PRICE |
230 VOLT |
PRICE |
230 VOLT |
PRICE |
1/2 |
|
$854.61 |
|
1,462.64 |
|
$1,037.75 |
|
$1,462.64 |
1 |
|
|
|
|
1-1/2 |
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
Manual Start-Stop Switch Kit |
|
Start-Stop Push Button Kit, Remote Mounted |
|
EA-000001 ...................................... |
$175.00 |
|
|
EA-000002....................................... |
$175.00 |
|
Includes:
032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware |
|
|
Includes:
033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware |
|
|
|
|
|
Forward-Reverse-Stop Push Button Kit,
Remote Mounted |
|
|
|
|
|
|
|
Up-Down-Stop Push Button Kit, Remote
Mounted |
|
EA-000003....................................... |
$318.64 |
|
|
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware |
|
|
EA-000004....................................... |
$318.64 |
|
|
|
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Start-Stop Push-button Station |
|
Start-StopPush-button Station |
033.1955
|
$152.60 |
|
|
033.195................................................. |
$102.95 |
Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
Fwd-Rev-Stop Push-button Station |
|
Fwd-Rev-StopPush Button Station |
033.1965 |
$286.91 |
|
|
033.196.................................................. |
$354.72 |
Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
Up-Down-Stop Push-button Station |
|
OPTIONAL
STARTER CONTROLS |
033.1975 |
$286.91 |
|
|
Auto Restart Control, 3 Phase, Non-Reversing |
Remote
mounted, Nema 1 |
|
|
|
EA-011
............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$2,320.91 |
|
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES |
|
|
|
Control Circuit Transformer Included for 115 Volt
Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
AND IS SUPPLYING ANY ELECTRICAL
CONTROLS, THEN MOTOR HP, VOLTAGE,
PHASE, AND FULL LOAD CURRENT MUST BE
STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED. |
|
|
|
|
|
|
|
|
Auto Restart Control, 1 Phase, Non-Reversing |
|
|
EA-012
(115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket. |
$2,352.04 |
|
|
$2,451.57 |
|
|
|
Add on |
$139.98 |
for
the above Push Buttons |
|
|
|
to
be Mounted. |
|
|
|
Add on |
$316.40 |
for
the above Starters to be |
|
|
|
Mounted
and Wired. |
|
|
|
|
|
for
the above Starters and |
|
|
|
Add on |
$419.23 |
|
|
|
|
|
Mounting Brackets for photo eye |
|
|
|
Push
Button Stations to be Mounted and Wired. |
|
|
|
#033.2122
B-05165 .............................................. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$85.26 |
|
|
|
|
|
|
|
|
CONVEYOR
WEIGHT TABLE |
SIZE TO ORDER Overall
Length
"A" 4"
Dia
Pulley |
Bed
Length
"L" |
"B"
@
25° |
"H" @
25°
Infeed
@ 30-1/2" Discharge
@ 30-1/2" |
Between
Rail
Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
SIZE TO
ORDER
Overall
Length
"A" 6"
Dia.
Pulley |
27" |
31" |
33" |
37" |
39" |
Belt
Width |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
28" |
30" |
34" |
36" |
Overall
Frame
Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
13'-10" |
10' |
12'-8" |
4'-11" |
Weights
(Lbs.) |
886 |
941 |
996 |
1051 |
1106 |
1161 |
1216 |
14' |
1305 |
1457 |
1533 |
1685 |
1761 |
15'-10" |
12' |
14'-7" |
5'-8" |
914 |
971 |
1028 |
1085 |
1142 |
1199 |
1256 |
16' |
1347 |
1503 |
1581 |
1737 |
1815 |
17'-10" |
14' |
16'-5" |
6'-4" |
942 |
1001 |
1060 |
1119 |
1178 |
1237 |
1296 |
18' |
1389 |
1549 |
1629 |
1789 |
1869 |
19'-10" |
16' |
18'-3" |
7'-2" |
970 |
1031 |
1092 |
1153 |
1214 |
1275 |
1336 |
20' |
1431 |
1595 |
1677 |
1841 |
1923 |
21'-10" |
18' |
20'-1" |
8'-0" |
998 |
1061 |
1124 |
1187 |
1250 |
1313 |
1376 |
22' |
1473 |
1641 |
1725 |
1893 |
1977 |
23'-10" |
20' |
21'-11" |
8'-10" |
1026 |
1091 |
1156 |
1221 |
1286 |
1351 |
1416 |
24' |
1515 |
1687 |
1773 |
1945 |
2031 |
25'-10" |
22' |
24'-8" |
10'-0" |
1054 |
1121 |
1188 |
1255 |
1322 |
1389 |
1456 |
26' |
1557 |
1733 |
1821 |
1997 |
2085 |
27'-10" |
24' |
25'-6" |
10'-6" |
1082 |
1151 |
1220 |
1289 |
1358 |
1427 |
1496 |
28' |
1599 |
1779 |
1869 |
2049 |
2139 |
29'-10" |
26' |
27'-4" |
11'-5" |
1110 |
1181 |
1252 |
1323 |
1394 |
1465 |
1536 |
30' |
1641 |
1825 |
1917 |
2101 |
2193 |
31'-10" |
28' |
29'-2" |
12'-5" |
1138 |
1211 |
1284 |
1357 |
1430 |
1503 |
1576 |
32' |
1683 |
1871 |
1965 |
2153 |
2247 |
33'-10" |
30' |
31'-0" |
13'-1" |
1166 |
1241 |
1316 |
1391 |
1466 |
1541 |
1616 |
34' |
1725 |
1917 |
2013 |
2205 |
2301 |
35'-10" |
32' |
33'-10" |
14'-0" |
1194 |
1271 |
1348 |
1425 |
1502 |
1579 |
1656 |
36' |
1767 |
1963 |
2061 |
2257 |
2355 |
37'-10" |
34' |
34'-8" |
14'-7" |
1222 |
1301 |
1380 |
1459 |
1538 |
1617 |
1696 |
38' |
1809 |
2009 |
2109 |
2309 |
2409 |
39'-10" |
36' |
36'-5" |
15'-7" |
1250 |
1331 |
1412 |
1493 |
1574 |
1655 |
1736 |
40' |
1851 |
2055 |
2157 |
2361 |
2463 |
41'-10" |
38' |
38'-2" |
16'-6" |
1278 |
1361 |
1444 |
1527 |
1610 |
1693 |
1776 |
42' |
1893 |
2101 |
2205 |
2413 |
2517 |
43'-10" |
40' |
40'-0" |
17'-4" |
1306 |
1391 |
1476 |
1561 |
1646 |
1731 |
1816 |
44' |
1935 |
2147 |
2253 |
2465 |
2571 |
|
All
weights are conveyor weights only. Accessories, crating, etc., are
not included. |
|
|
INCLINE
LIFT GUIDE POWERED BELT CONVEYORS |
 |
|
Belt Conveyors, Conveyor,
Conveyor Belt, Incline Conveyor, Floor-to-Floor Incline Conveyor, Conveyors,
and Slider Bed from your
source for material handling equipment. |
Back
to Product Category |
 |
|