Accumulating Conveyor, Conveyor, Live Roller Curve Conveyor, Roller Conveyors, Conveyors

ENGINEERED STEEL PRODUCTS

Priced Full Line Products Catalog

20 Technology Way • West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679

Back to Product Category

MODEL 190-LRC, 190-LRS, 190-LRSS
LIVE ROLLER CURVE, SPUR, OR STRAIGHT SPUR CONVEYOR
MODEL 190-LRC - LIVE ROLLER CURVE CONVEYOR

	The Model 190-LRC is a medium-duty live roller curve that provides a positive drive for negotiating 90°, 60°, 45°, or 30° turns. It may be self-powered or can be slave driven from 190-ACC, LRS or LRSS conveyors.

		* 12 Bed Widths * Reversible * Tapered Tread Rollers * Adjustable MS-Type Floor Supports Available

DRAWING FOR 190-LRC

MODEL 190-LRS - LIVE ROLLER SPUR CONVEYOR


		The Model 190-LRS Live Roller Spur is used in diverging or converging applications. It may be self-powered or can be slave driven form 190-ACC, LRC, or LRSS conveyors.

		* 12 Bed Widths * Reversible * Right or Left Hand Units Available * Adjustable MS-Type floor supports available

STANDARD SPECIFICATIONS FOR 190-LRC & 190-LRS

BED - (For 190-LRC & LRS) Roller bed with 2-1/2 in. dia. tapered to 1-11/16 in. dia. x 16 Ga. galvanized and 1.9 in. dia. rollers x 16 Ga. galvanized tube. Mounted in 6-1/2 in. x 12 Ga. powder painted formed steel channel frame.		TAKE-UP - Take-ups provided to maintain proper V-belt tension. Includes 4-3/8 in. dia. x 5/8 in. bore V type take-up sheave.

		BEARINGS - Tread rollers have pre-lubricated ball bearings. Flange and pillow block bearings are sealed, pre-lubricated with eccentric lock collar.

FLOOR SUPPORTS - Now supplied as optional equipment.

		MOUNTED BRACKET - Bracket is supplied to attach spur to side channels of 190-ACC,190-ACZ, or 190-LR conveyor. (for 190-LRS.)

END DRIVE - Mounted underneath bed section.

DRIVE BELT - Endless B-section V-Belt, industrial grade.

		BUTT COUPLINGS - Standard for connecting 190-ACC, 190-LRS, 190-LRC and 190-LRSS, 190-ACZ, or 190-LR conveyors.

PRESSURE SHEAVES - 2-1/2 in. dia. with 3/8 in. bore.

		SPEED REDUCTION - Sealed worm gear reducer driven by V-belt No. 50 roller chain to drive sheave. (For 190-LRSS has C-Face speed reducer)

IDLER SHEAVE - 4 in. dia. x 5/8 in. bore V type and/or 5-1/2 in. dia. x 5/8 in. bore flat type. (For 190- LRC and 190-LRS only.)

		MOTOR - 1/2 HP-208/230/460/575V-3 Ph. 60 Hz. Totally Enclosed .

SNUB RETURN SHEAVE – 3-1/4 in. dia. x 1/2 in. bore flat idler has seven position adjustment. (For 190-LRSS only)

		CONVEYING SPEED - Constant 65 FPM.

CAPACITY - 500 lbs. total distributed live load.

Spur Applications - Live Roller Spurs are used to transfer cartons, etc., onto and off of main conveyor lines. The illustrations below show the correct usage of Plows and Turning Wheels with Spurs in Diverging and Converging applications.

OPTIONAL EQUIPMENT 190-LRC & 190-LRS

END DRIVE – Mounted on inside radius. Minimum elevation 18-7/8”.		FLOOR SUPPORTS–MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.

CONVEYING SPEED - Other constant and variable speeds from 25 to 120 FPM. NOTE: Capacity affected with speed change.

SIDE MOUNTED DRIVE - Motor reducer unit mounted to side of conveyor. Specify inside or outside. Minimum elevation 11-1/16 in. (For 190-LRS) Minimum elevation - 11-1/8 in.(For 190-LRC)

		SLAVE DRIVEN - Standard drive may be omitted and curve or spur slave driven from 190-ACC, 190-ACZ, or 190-LR conveyors. (Specify by sketch, location of slave connection). Minimum elevation 11 in.

O-RING DRIVE CHAIN–With sealed in lubricant (Recommended for applications that do not permit regular lubrication).

		MOTORS - Energy efficient, single phase, other characteristics. 1 HP maximum.

		ELECTRICAL CONTROLS - Non-reversing magnetic starters and push-button stations. AC variable frequency drive.

GUARD RAILS - Adjustable Universal Channel Guard Rail, fixed channel, type A or B angle. See Accessory section. NOTE: If product comes in contact with guard rails, product flow will be affected.

		CEILING HANGERS - 5/8 in. dia. x 8 ft. long un- plated rods fully threaded. Other lengths and galvanized rods available.

POLY-TIER SUPPORTS - 36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. (Only for 190-LRC and LRS.)

MODEL 190-LRSS - LIVE ROLLER STRAIGHT SPUR CONVEYOR


		The Model 190-LRSS Live Roller Straight Spur is used in diverging or converging applications. It may be self-powered or can be slave driven from 190-ACC, LRC, or LRS conveyors.

		* 12 Bed Widths * Reversible * Right or Left Hand Units Available * Adjustable MS-Type floor supports available

STANDARD SPECIFICATIONS FOR 190-LRSS ONLY

BED - Roller bed with 1.9 in. dia. Roller x 16 Ga. galvanized tube spaced every 3 in. Mounted in 6-1/2 in. x 12 Ga. powder painted steel channel frame.		BEARINGS - Tread rollers have pre-lubricated ball bearings. Flange and pillow block bearings are sealed, pre-lubricated with eccentric lock collar.

FLOOR SUPPORTS - Now supplied as optional equipment.		MOUNTED BRACKET - Bracket is supplied to attach spur to side channels of 190-ACC,190-ACZ, or 190-LR conveyor.

END DRIVE - Mounted underneath bed section.
END DRIVE - Mounted underneath bed section.
		BUTT COUPLINGS - Standard for connecting 190-ACC, 190, 190-LRC, 190-ACZ, or 190-LR conveyors.
DRIVE BELT - Endless B-section aramid core V-Belt drives each section of conveyor.

PRESSURE SHEAVES - 2-1/2 in. dia. with 3/8 in. bore.

		SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive sheave

SNUB RETURN SHEAVE – 3-1/4 in. dia. x 1/2 in. bore flat idler has seven position adjustment.

		MOTOR - 1/2 HP-208/230/460/575V-3 Ph. 60 Hz. Totally Enclosed .

TAKE-UP - Take-ups provided to maintain proper V-belt tension. Includes 4 in. dia. x 5/8 in. bore V type take-up sheave.

		CONVEYING SPEED - Constant 65 FPM.

		CAPACITY - 500 lbs. total distributed live load.

Spur Applications - Live Roller Spurs are used to transfer cartons, etc., onto and off of main conveyor lines. The illustrations below show the correct usage of Plows and Turning Wheels with Spurs in Diverging and Converging applications.

DRAWING FOR 190-LRS & 190-LRSS

	Live Roller Spurs or straight spurs are used to transfer cartons, etc., onto and off of main conveyor lines. The illustrations below show the correct usage of Plows and Turning Wheels with Spurs in Diverging and Converging applications.
SPUR APPLICATIONS

OPTIONAL EQUIPMENT

FLOOR SUPPORTS–MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.		O-RING DRIVE CHAIN–With sealed in lubricant (Recommended for applications that do not permit regular lubrication).

		GUARD RAILS - Adjustable Universal Channel Guard Rail, fixed channel, type A or B angle. See Accessory section. NOTE: If product comes in contact with guard rails, product flow will be affected.

BED LENGTHS - 57 in., 63 in., 69 in.,75 in., 81 in., and 87 in. Drive not available on all lengths and widths. Contact us.

		CEILING HANGERS - 5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.

CONVEYING SPEED - Other constant and variable speeds from 25 to 120 FPM. NOTE: Capacity affected with speed change.

		SLAVE DRIVEN - Standard drive may be omitted and curve or spur slave driven from 190-ACC, 190-ACZ, or 190-LR conveyors. (Specify by sketch, location of slave connection). Minimum elevation 11 in.

SHAFT MOUNTED DRIVE – Motor reducer unit mounted on extended drive shaft. Can be mounted with standard sheave retainer for 10 ½ in. elevation (motor horizontal), or can be mounted with low elevation sheave retainer for 8 3/4 in. elevation (motor vertical). Mounting bracket and torque arm allows for multiple mounting positions.

		MOTORS - Energy efficient, single phase, other characteristics. 1 HP maximum.

		ELECTRICAL CONTROLS - Non-reversing magnetic starters and push-button stations. AC variable frequency drive.

SIDE MOUNTED DRIVE - Motor reducer unit mounted to side of conveyor. Specify inside or outside. Minimum elevation 11-1/2 in.

SHAFT MOUNTED DRIVE (For 190-LRSS)

SPEED CHART FOR SHAFT MOUNTED DRIVE ON 190ACC
SPEED FPM	MAX HP	MOTOR FRAME
26	3/4	56C
32	1	56C
43	1	46C
52	1-1/2	140TC
64	2	140TC
86	2	140TC
103	2	140TC
129	3	140TC
*172	3	140TC
*257	3	140TC
*343	3	140TC

Conveyor shown with
featured option -
shaft mounted drive.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

PRICES FOR COMPLETE CONVEYOR INCLUDE:

* 2-1/2" dia. galvanized tapered to 1-11/16" dia.
   Roller in a 6-1/2" x 12 Ga. channel frame. (The
   190-LRSS has 1.9" dia. x 16 Ga. galvanized roller.)
* Driving V-Belt
* 1/2 HP - Totally Enclosed Motor (Specify Exact
   Voltage)
* Less Floor Supports

* V-Belt Drive (190-LRC & LRS) / C-Face Drive
(190-LRSS)
* Totally Enclosed Chain & Motor V-Belt Guard
* 65 FPM Constant Conveying Speed
* End Guards
* Less Electrical Controls

IMPORTANT NOTES...

• OTHER WIDTHS
Contact us for "IN-BETWEEN WIDTHS".

• NON-STANDARD WIDTHS WITH STANDARD
INSIDE RADIUS
Contact us for lead time.

For Weights see below.

PRICES FOR 190-LRC Live ROLLER CURVE CONVEYOR

Between Rail Width	15"	21"	27"	33"	39"
Overall frame Width	18"	24"	30"	36"	42"
30°	$3,530	$3,697	$3,866	$4,397	$4,616
45°	$3,806	$4,024	$4,241	$4,953	$5,229
60°	$4,205	$4,489	$4,772	$6,052	$6,444
90°	$4,416	$4,759	$5,103	$6,722	$7,215
180°	$7,898	$8,585	$9,274	$12,517	$13,506

PRICES FOR 190-LRS Live ROLLER SPUR CONVEYOR

Between Rail Width	15"	21"	27"	33"	39"
Overall frame Width	18"	24"	30"	36"	42"
30°	$4,842	$5,319	$5,796	$6,275	$6,752
45°	$4,561	$4,871	$5,180	$5,490	$5,800

PRICES FOR 190-LRSS Live ROLLER STRAIGHT SPUR CONVEYOR

Between Rail Width	15"	21"	27"	33"	39"
Overall frame Width	18"	24"	30"	36"	42"
30°	$4,088	$4,298	$4,507	$4,716	$4,926
45°	$3,676	$3,852	$4,027	$4,204	$4,379


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

PRICES FOR OPTIONAL EQUIPMENT

OPTIONAL DRIVE

CONSTANT AND VARIABLE SPEEDS

Unified Drives: (Shaft Mounted)

Constant - Within 25 - 120 FPM.............

No Charge

Unified Drives:	16" to 28"	30" to 42"
Shaft Mounted Drive	$408.10	$408.10

Variable Speed....See Electrical Controls and Drive
Section Below.

DRIVE COMPONENT DEDUCTS

Speed FPM	43	52	64	86	103	129	172	257	343
Max HP	1	1 *	2	2	2	2*	2*	2*	2*

Less Motor Drive, Motor Mount and Guards, but with

Drive Shaft..............Deduct.....................

$694.20

* Reducer size increases with 2 HP.
**Contact us.

Less Motor Only (1/2 HP-208/230/460/575
V-3 Ph.-60 Hz)

...............................Deduct......................
*Less Reducer........Deduct......................

$258.30

Drive Type	OVERALL FRAME WIDTH
Drive Type	16" TO 24"	26" TO 42"
Side Mounted	$371.10	$482.20

$307.40

*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.

MOTORS

Extra Motor Price for OTHER THAN: 1/2 HP-208/230/
460/575V-3 Ph.-60 Hz. - Totally Enclosed.
Speed affects horsepower requirements.

SLAVE DRIVEN

The

"190-LRC",

"190-LRS", & "190-LRSS" may be

slave driven from straight "ACC", "ACZ", or "LR"

H.P. REQ.	TOTALLY ENCLOSED		ENERGY EFFICIENT
H.P. REQ.	200/208V 3 Ph.-60 Hz.	230/460/575V 3Ph.-60 Hz.	115/230 V 1 Ph.-60 Hz.	230/460/575 V 3Ph.-60 Hz.
1/2	N/C	N/C	$39.30	$400.90
1	N/A	N/A	$143.20	$498.10

conveyors............Deduct.......................

$490.30

LRC Slave Connection on Inside Radius.

Please provide sketch.

SLAVE DRIVEN FROM SLIDER BED

..............................Deduct...........................

$412.00

NOTE: Drive deduct includes slave connection and
system end for slider bed. (Belt 6" less than Bed Width).

FLOOR SUPPORTS

Not Included in Base Price. Use Chart Below for
Required Elevation.

GUARD RAILS

"MS" SUPPORT
Model No.	Adjustment to Top of Roller	Price Each
*MS-1	13-3/4" to 15-1/2"	$58.40
*MS-1.2	14-3/4" to 16-1/2"	$58.40
*MS-1.4	15-3/4" to 17-1/2"	$58.40
*MS-2	16-3/4" to 19-3/4"	$60.40
MS-3	19-3/8" to 22-3/8"	$66.40
MS-4	22-3/8" to 28-3/8"	$76.40
MS-5	26-3/8" to 32-3/8"	$79.80
MS-6	30-3/8" to 42-3/8"	$88.10
MS-7	40-3/8" to 52-3/8"	$130.20
MS-8	52-3/8" to 64-3/8"	$148.50
MS-9	64-3/8" to 76-3/8"	$162.80
MS-10	76-3/8" to 88-3/8"	$185.60
MS-11	86-3/8" to 98-3/8"	$205.20
MS-12	98-3/8" to 110-3/8"	$214.60

Adjustable UniversalChannel Guard Rail
90°, 60°, 45°, & 30°

Both Sides..........................................

$224.40

Outside Only.........................................

$151.30

Inside Only............................................

$99.70

Angle Type "A"
1-1/2" x 1-1/2" x 12 Ga.
90°, 60°, 45°, & 30°

Both Sides.............................................

$91.80

Outside Only.........................................

$56.90

Inside Only............................................

$33.70

Angle Type "B"
1-1/2" x 1-1/2" x 12 Ga.
90°, 60°, 45°, & 30°

Both Sides.............................................

$137.20

Outside Only.........................................

$87.10

Inside Only............................................

$50.60

Fixed Channel Type 90°, 60°, 45°, & 30°

3-1/2" x 1-1/2" x 12 Ga.

6-1/2" x 1-1/2" x 12 Ga.

*Less than 18-1/2" top of roller elevation-
-Shaft Mounted Drive or Side Mounted Drive required.

Both Sides......

$219.00

Both Sides......

$406.10

Outside Only...

$138.30

Outside Only...

$256.40

NOTE: MS-7 to MS-12: Knee Braces included in price.

Inside Only....

$81.90

Inside Only....

$145.00

Extra Knee Braces...........Add per pair........

$30.00

10-1/2" x 1-1/2" x 12 Ga.

13-1/2" x 1-1/2" x 12 Ga.

Single Center Leg (MSC-6 and below) ea ......

$60.40

Both Sides......

$625.20

Both Sides......

$812.70

Single Center Leg (MSC-7 and above) ea ......

$75.10

Outside Only...

$394.60

Outside Only...

$512.80

Inside Only....

$222.80

Inside Only....

$304.00

NOTE: For 180° curve, use the above prices x2.
NOTE: If product comes in contact with guard rails,
product flow will be affected.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

LOW ELEVATION

TANGENTS (Add-on to Curve)

Low Elevation Sheave Retainer and Low Elevation
Take-Up to provide 11 1/8” elevation for 190-LRC
and 190-LRS. (Side Mounted Drive required – See
Optional Drives.)

Special Length Tangents for 190-LRC & 190-LRS curves
up to 4’ long. with 3” roller centers

*OAL Tangent	190-LRC & 190-LRS
9", 12", 15", 18", & 21"	$438.60
24", 27", 30", 33", & 36"	$877.60
39", 42", 45", 48"	$1,169.70

Low Elevation Sheave Retainer to provide 8 3/4”
elevation for 190-LRSS. (Shaft Mounted Drive
required – See Optional Drives.)

Low Elevation Sheave Retainer to provide 11 1/8”
elevation for 190-LRSS. (Side Mounted Drive
required – See Optional Drives.)

* "OAL Tangent" includes a 6-1/4" long tangent on 90°
and an 18" long tangent on a 30°, 45°, & 60°. Tangent
lengths increase in 3" increments only.

Add-on for LRC & LRS...per bracket......

$433.30

Add-on for LRSS.............per bracket......

$333.20

NOTE: 30°,45°, & 60° minimum 18 in. Long tangent on
both ends. All curves, no more than 48 in. Long tangent
on one end. For Tangents over 18” long on either or both
ends, add one additional floor support per end. Combined
Tangent lengths cannot exceed 54 1/4”. 180° Curve has
maximum 6 1/4” long tangent each end with no middle
tangent. Contact factory for additional tangent
combinations.

TRAFFIC COP

See below.

TURNING WHEEL

See below.

ELECTRICAL CONTROLS

See below.

GALVANIZING

• CEILING HANGERS
	Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated fully threaded rods ......................................................................
		$147.90
	Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized fully threaded rods .......................................................................
		$176.60
	Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long unplated fully threaded rods................................................................................
		$218.40
	Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long galvanized fully threaded rods.................................................................................
		$359.60
	Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long unplated fully threaded rods.................................................................................

		$362.60
	Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long galvanized fully threaded rods..................................................................................
		$419.40
	Ceiling Hanger Brackets, Less Rods Only ....................................	$93.10
	Extra Length Rods:
	(2) 8’-0” long x 5/8” dia. unplated fully threaded rods ..................	$54.20
	(2) 8’-0” long x 5/8” dia. galvanized fully threaded rods ...............	$83.40
	(2) 10’-0” long x 5/8” dia. unplated fully threaded rods ................	$125.20
	(2) 10’-0” long x 5/8” dia. galvanized fully threaded rods .............	$266.30
	(2) 12’-0” long x 5/8” dia. unplated fully threaded rods ................	$269.60
	(2) 12’-0” long x 5/8” dia. galvanized fully threaded rods .............	$326.50
	Hex Coupling Nuts for Rods .........................................................	$4.90
	Above noted delivery times determined by delivery time of model ordered.

• POLY-TIER SUPPORTS

PRICES FOR COMPLETE
SUPPORT INCLUDE:

IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.

• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only

CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs

(2) TIER POLY-TIER SUPPORTS
36"	$311.36
42"	$320.01
48"	$328.56
54"	$337.00
60"	$345.65
66"	$354.42
72"	$362.86
78"	$371.52
84"	$380.00
90"	$388.50
96"	$397.27
102"	$405.93
108"	$414.60
114"	$423.69
120"	$431.46

(3) TIER POLY-TIER SUPPORTS
36"	$439.01
42"	$447.80
48"	$456.30
54"	$464.80
60"	$473.42
66"	$482.18
72"	$490.62
78"	$499.30
84"	$507.80
90"	$516.40
96"	$524.90
102"	$533.60
108"	$542.46
114"	$550.45
120"	$559.00


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

TC-250 TRAFFIC COP

The Traffic Cop controls product flow from one
conveyor onto another. It allows products from one
line of traffic to flow freely, without interference from
another converging line of traffic. This eliminates collision
of products which may cause damage and disrupt
product flow. Specify model, width and degree.
• 7 arm widths, aluminum
• Available in 30°, 45°, 60°, 90° & 180° applications.
Includes mounting hardware.
* 180° application - 10" minimum required between lines.

Overall Frame Width	16" to 28"	30" to 42"
Price Each	$2,105.90	$2,248.20

TURNING WHEEL

Turning Wheels are used in converging 30° and 45° spur applications. Also used at 90° (right angle) transfers where
Traffic Cops, Package Stops and other product flow controlling devices are used. Wheel is mounted on adjustable
bracket to insure proper package orientation through transfer. Can be mounted to slider bed or side channels of
powered and gravity conveyors - specify model where applicable.

B-05568 - 6" dia. Turning Wheel with mounting hardware .............................................$123.00

Note: To be used on roller beds & gravity models with 90° transfer.
Please specify what model the assembly will be used on.

B-10739 - 6" Dia. Turning Wheel with mounting hardware..............................................$123.00

Note: To be used on slider beds & spur models. Please specify what model the assembly will be used on.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION

MANUAL START SWITCH or
SAFETY DISCONNECT

LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER

#032.1014.........................................

$213.01

#033.2032 & #033.2072..................$555.67
Nema 4

"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)

LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER

#033.2033& #033.2072...................$332.11
Nema 4

REVERSING DRUM SWITCH

#032.103..........................................

$854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase

PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range

FOOT SWITCH WITH GUARD

#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range

#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.

PHOTO EYE, ON-OFF TYPE

#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC

POWER CORD AND PLUG (20')

POWER CORD WITH PLUG ONLY 20' LONG
Model No.	Voltage	HP Rating	Prices
EA-039-1A	115/1	1/2-3/4	$106.67
EA-039-2A	115/1	1	$106.67
EA-039-3A	115/1	1 1/2	$155.18
EA-039-4A	230/1	1/2-1	$106.67
EA-039-5A	230/1	1 1/2-2	$109.67
EA-039-6A	208-230/3	1/2-2	$178.60
EA-039-7A	460/3	1/2-2	$178.60

POWER CORD WITH PLUG 20' LONG WITH MANUA
Model No.	Voltage	HP Rating	Prices
EA-039-1B	115/1	1/2-3/4	$173.16
EA-039-2B	115/1	1	$330.67
EA-039-3B	115/1	1 1/2	$377.96
EA-039-4B	230/1	1/2-1	$293.04
EA-039-5B	230/1	1 1/2-2	$330.67
EA-039-6B	208-230/3	1/2-2	$362.97
EA-039-7B	460/3	1/2-2	$362.97

MOUNTING BRACKETS FOR PHOTO
EYE #033.2122

B-05165...........................................$118.10

AIR PRESSURE SWITCH

#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH

#032.285 with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4

"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE

#032.281...one side.................$7.44 per / ft.
both sides..............$15.87per / ft.

EMERGENCY PUSH BUTTON

#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE

#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48

NOTE: PRICING LISTED NOT MOUNTED
OR WIRED

"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC

#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

CONTROLLER PRICES

AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size	115 Volt		208/230 Volt
1/2	VSC-12-10		VSC-12-12
Price	$1,491.84		$1,189.37
1	VSC-12-11		VSC-12-13
Price	$1,724.27		$1,391.05
2	N/A		VSC-12-14
Price	~		$1,794.20
THREE PHASE CONTROLLER INPUT
Motor Size	208/230 Volt	460 Volt	575 Volt
1/2	VSC-01-15	VSC-01-18	VSC-12-29
Price	$1,564.99	$1,656.34	$2,155.73
1	VSC-01-16	VSC-01-19	VSC-12-29
Price	$1,579.75	$1,794.20	$2,155.73
2	VSC-01-17	VSC01--20	VSC-12-30
Price	$1,978.69	$2,070.37	$2,663.45

REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS

HP	Part No.	Price
1/2	032.351 230/460	$618.71
1	032.353 230/460	$705.52
2	032.355 230/460	$797.31
1/2	032.3512 575	$1,449.11
1	032.3532 575	$1,611.17
2	032.3552 575	$1,897.10

IMPORTANT NOTES...

• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.

OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)

$675.20

Brake Relay Kit (EA-068A)..............................

$542.68

• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.)

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE

Part No.	Description	Price
EA-VSC-01-CB	2 HP Electronic Clutch-Brake Kit	$5,058.00

OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)

$675.20

KIT INCLUDES

Part No.	Description
VSC-01-20	AC Variable Speed Controller, 460 Volt, 3 Phase
032.345	2 HP 460 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets

IMPORTANT NOTES

• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets

Part No.	Description
VSC-01-17	AC Variable Speed Controller, 230 Volt, 3 Phase
032.345	2 HP 230 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)

An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.

THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	MOTOR DUTY	NON-REVERSING					REVERSING
H.P.	MOTOR DUTY	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE
1/2	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B25	EN-46B16	EN-57B10	$1516.60	ER-20B40	ER-23B25	ER-46B16	ER-57B10	$2,023.30
			EN-23B25	EN-46B16				ER-23B25	ER-46B16
			EN-23B16	EN-46B10				ER-23B16	ER-46B10
1	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B40	EN-46B25	EN-57B16		ER-20B40	ER-23B40	ER-46B25	ER-57B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
1-1/2	GEARMOTORS	EN-20C10	EN-23B63	EN-46B40	EN-57B25		ER-20C10	ER-23B63	ER-46B40	ER-57B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
2	STANDARD EASY CLEAN ENERG. EFF.	EN-20C10	EN-23C10	EN-46B40	EN-57B40		ER-20C10	ER-23C10	ER-46B40	ER-57B40
			EN-23C10	EN-46B40				ER-23C10	ER-46B40
			EN-23B63	EN-46B40				ER-23B63	ER-46B40

SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	NON-REVERSING		REVERSING		NON-REVERSING		REVERSING
	115 VOLT	PRICE	115 VOLT	PRICE	230 VOLT	PRICE	230 VOLT	PRICE
1/2	EN-1SC10	$1,182.40	ER-1SC10	$2,023.30	EN-2SB63	$1,435.60	ER-2SB63	$2,023.30
1	EN-1SC16		ER-1SC16		EN-2SC10		ER-2SC10
1-1/2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10
2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10


• Manual Start-Stop Switch Kit			• Start-Stop Push Button Kit, Remote Mounted
	EA-000001 ......................................	$242.09		EA-000002.......................................	$242.09
	Includes: 032.1014 Manual Start Switch, Nema 1, B-21467 Mounting Bracket with Mounting Hardware			Includes: 033.1955 Push Button Station, One Direction, Nema1, B-21467 Mounting Bracket with Mounting Hardware

• Forward-Reverse-Stop Push Button Kit, Remote Mounted

			• Up-Down-Stop Push Button Kit, Remote Mounted
	EA-000003.......................................	$440.67	• Up-Down-Stop Push Button Kit, Remote Mounted
	Includes: 033.1965 Push Button Station, Reversing, Nema1, B-21467 Mounting Bracket with Mounting Hardware			EA-000004.......................................	$440.67
				Includes: 033.1975 Up Down Stop Push Button Station, Reversing, Nema 1, B-21467 Mounting Bracket with Mounting Hardware


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station				• “Start-Stop”Push-button Station
033.1955			$211.23		033.195.................................................	$142.50
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Fwd-Rev-Stop” Push-button Station				• “Fwd-Rev-Stop”Push Button Station
033.1965			$397.05		033.196..................................................	$490.95
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Up-Down-Stop” Push-button Station				OPTIONAL STARTER CONTROLS
033.1975			$397.05	OPTIONAL STARTER CONTROLS
033.1975			$397.05	• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1				• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1					EA-011 ............................................ Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), and a Control Circuit Transformer (As Required), & Pushbutton Station (033.195).	$3,210.68
						$3,210.68

IMPORTANT NOTES
• Control Circuit Transformer Included for 115 Volt Control Voltage. • Above starters are in Nema 3, 4 and 12 Enclosures. • The starters included Safety Disconnect, Overload Relay, and Aux. Contacts as required. • IF AN ORDER IS SUPPLIED LESS MOTOR, AND IS SUPPLYING ANY ELECTRICAL CONTROLS, THEN MOTOR HP, VOLTAGE, PHASE, AND FULL LOAD CURRENT MUST BE STATED ON THE ORDER. • PRICING LISTED IS NOT MOUNTED OR WIRED.

				• Auto Restart Control, 1 Phase, Non-Reversing
					EA-012 (115 Volt) ........................... EA-017 (230 Volt) ........................... Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), Pushbutton Station (033.195), and (230 V. Only) a Control Circuit Transformer (As Required). Note: Above Price does NOT include Photo Eye Mounting Bracket.	$3,253.63
						$3,391.27

• Add on	$192.70	for the above Push Buttons
to be Mounted.
• Add on	$995.10	for the above Starters and
Push Button Stations to be Mounted and Wired. Supply 20'0" of cable for push button only.

				• Mounting Brackets for photo eye
				• Mounting Brackets for photo eye
					#033.2122 B-05165 ..............................................
						$118.10

190-LRC CONVEYOR WEIGHT TABLE

Between Rail Width	Overall Frame Width	"R"	Number of Rollers**				Weight (Lbs.)
Between Rail Width	Overall Frame Width	"R"	90°	60°	45°	30°	90°	60°	45°	30°
13"	16"	24"	16T/4S	10T/12S	8T/12S	5T/12S	336	330	323	317
15"	18"	32 1/2"	20T/4S	14T/12S	10T/12S	7T/12S	349	343	336	300
17"	20"						364	357	350	343
19"	22"						378	371	364	357
21"	24"						393	386	378	371
23"	26"						408	401	393	386
25"	28"						425	417	409	401
27"	30"						442	434	425	417
31"	34"	48"	30T/4S	22T/12S	14T/12S	10T/12S	562	551	540	529
33"	36"						585	573	562	550
37"	40"						625	613	601	589
39"	42"						651	638	625	612

All weights are conveyor weights only. Accessories, crating, etc., are not included.

* T = TAPERED S = STRAIGHT

190-LRS CONVEYOR WEIGHT TABLE

Between Rail Width

Overall Frame Width

"R"

"A"

"B"

"C"

"D"

"E"

Number of
Rollers**

Weight
(Lbs.)

45°

30°

45°

30°

45°

30°

45°

30°

45°

30°

45°

30°

45°

30°

13"

16"

24"

29"

38"

27"

36"

21"

30"

21 7/8"

38"

50"

42 7/32"

13S/8T

12S/10T

195

206

15"

18"

32 1/2"

32"

41"

30"

39"

36"

54"

34
31/32"

63"

66
5/8"

61 19/32"

18S/10T

20S/14T

224

245

17"

20"

35"

47"

33"

45"

233

255

19"

22"

38"

50"

36"

48"

241

264

21"

24"

41"

53"

39"

51"

250

270

23"

26"

44"

56"

42"

54"

262

287

25"

28"

47"

62"

45"

60"

276

299

27"

30"

50"

65"

48"

63"

282

311

31"

34"

48"

56"

74"

54"

72"

48"

75"

48"

88
31/32"

86
1/16"

85
1/2"

22S/14T

27S/22T

322

380

33"

36"

59"

77"

57"

75"

329

390

37"

40"

65"

86"

63"

84"

340

406

39"

42"

68"

89"

66"

87"

351

416

All weights are conveyor weights only. Accessories, crating, etc., are not included.

* T = TAPERED S = STRAIGHT

190-LRSS CONVEYOR WEIGHT TABLE

Between Rail Width	Overall Frame Width	"A"		"B"		Weight (Lbs.)
Between Rail Width	Overall Frame Width	45°	30°	45°	30°	45°	30°
13"	16"	29"	38"	27"	36"	176	202
15"	18"	32"	41"	30"	39"	179	210
17"	20"	35"	47"	33"	45"	182	214
19"	22"	38"	50"	36"	48"	185	216
21"	24"	41"	53"	39"	51"	188	219
23"	26"	44"	56"	42"	54"	191	222
25"	28"	47"	62"	45"	60"	194	224
27"	30"	50"	65"	48"	63"	198	227
31"	34"	56"	74"	54"	72"	201	230
33"	36"	59"	77"	57"	75"	208	235
37"	40"	65"	86"	63"	84"	212	239
39"	42"	68"	89"	66"	87"	216	243

All weights are conveyor weights only. Accessories, crating, etc., are not included.

Accumulating Conveyor, Conveyor, Live Roller Curve Conveyor, Spur, Live Roller Conveyors, Powered Live Roller,
Conveyors, and Roller Conveyors from your source for material handling equipment.

Back to Product Category

Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart

MODEL 190-LRC, 190-LRS, 190-LRSS

LIVE ROLLER CURVE, SPUR, OR STRAIGHT SPUR CONVEYOR

MODEL 190-LRS - LIVE ROLLER SPUR CONVEYOR

MODEL 190-LRSS - LIVE ROLLER STRAIGHT SPUR CONVEYOR

TC-250 TRAFFIC COP

TURNING WHEEL

Accumulating Conveyor, Conveyor, Live Roller Curve Conveyor, Spur, Live Roller Conveyors, Powered Live Roller, Conveyors, and Roller Conveyors from your source for material handling equipment.

Accumulating Conveyor, Conveyor, Live Roller Curve Conveyor, Spur, Live Roller Conveyors, Powered Live Roller,
Conveyors, and Roller Conveyors from your source for material handling equipment.