FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

GripSafe Reflective Tape No. 050

Wearwell gripsafe reflective tape Performance: BEST
GripSafe Reflective Tape prevents mat movement even in the
most heavily trafficked work areas. Designed for use on concrete
(sealed or unsealed), terrazzo, tile or even vinyl, this sturdy tape
will hold rubber and vinyl anti-fatigue mats in place. GripSafe can
also be used to designate specific areas or pathways both inside
and out. It can be adhered to asphalt and will withstand the
abuse of car, truck and tow-motor traffic
. For best results,
clean the floor surface and it allow to dry before installation, then
apply GripSafe to the lengths of the mat. If the mat is a large
custom size or over 6’ wide, it is best to use the tape on all sides.
Available in rolls only.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


Wearwell gripsafe reflective tape PRICING
Part # Size Price
050.4x45YL 4" x 45' $355.52 per roll
Ways to Prevent Movement
Mats move, but this can be prevented. The amount of movement depends on the type of mat, the amount of foot traffic
and the condition of the floor surface in the work environment. The fact that mats move is a basic rule and can be
explained by the principles of physics. The force of a human being moving forward in a walking gait tends to push
any uninstalled floor surface forward. However, there are ways to stop or inhibit this movement.
1. Install your mats. There are some matting products that are designed to be installed. ErgoDeck® is an
    excellent example. Its wide edging has bolt holes to allow the mat to be permanently anchored to the
    floor.
2. Buy sponge-backed mats with a higher underside coefficient of friction. This is especially important if your facility
    has smooth epoxy-covered floors. A natural rubber sponge is the best option in this case. Slip-Resistant
    Diamond-Plate No. 418
was designed just for this specific situation. The rubber sponge will move much less than
    any other because its cell structure is exposed and the compound has a much higher COF.
3. Tape the mats to the floor with an industrial strength tape. This is a good solution if you cannot tolerate any mat
    movement. In a high traffic area however, the tape may begin to fray after several months of usage and will need to
    be replaced.
4. Adhere the mats to the floor using either a high quality rubber or vinyl glue. This is also an option if you are
    worried about any mat movement. Contact your local hardware store for the best rubber, vinyl or silicone glue.

GripSafe Reflective Tape, Prevents Mat Movement, Use on Concrete (Sealed or Unsealed), Terrazzo, Tile or even
Vinyl, Hold Rubber and Vinyl Anti-Fatigue Mats in Place, and can be Adhered to Asphalt from your source for
material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart