
 |
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
 |
|
 |
Back to Product Category
CLASSIC
HEAVY DUTY POLYSTEEL
TABLE AND CHAIR
|
PATIO
FURNITURE |
|
Perfect
for the patio or sitting poolside, Polysteel patio sets are a compliment
to any setting. Comfortably contoured
and surprisingly strong, the chairs feature adjustable feet and the table
boasts a 30 inch diameter table top with a 1.7
inch hole to fit a 1.5 inch diameter pole. |
|
Wind,
sand, rain salt and snow are no match for polysteel. The natural weight
of our porducts allows them to with
stand any environmental factor. Patio sets are available in expanded metal,
laser-cut steel adn welded rod. The patio
table footprint is 30 inches and weights approximately 115 pounds. Each
patio chair is 23" x 25" and weights
approximately 55 pounds. |
|
|
|
|
 |
|
|
|
Champion
picnic tables are available in twelve standard colors (custom colors
are available) and feature an umbrella hole in most models. Choose from
a
variety of styles and mounts to fit your location. |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
See
below page for Patio Table and Chairs Specification |
|
|
|
|
|
|
|
|
|
POLYSTEEL
DECK TABLE & CHAIR |
|
|
|
|
 |
|
|
|
|
|
|
|
|
Completely
Plastisol Coated |
|
Rounded
corners for style and ease of entry |
|
Umbrella
hole standard in most models |
|
Tamper-resistant,
stainless steel hardware |
|
|
|
|
|
|
Bar
Height Table and Chairs |
|
|
|
|
 |
|
|
LASER
CUT TABLE & CHAIRS |
|
|
|
|
 |
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
PRICING |
Model |
Description |
Weight |
Price |
Expanded |
|
Deck
Chair, Expanded, Free Standing |
25 |
$369 |
|
Patio
Table, Expanded, Free Standing |
55 |
$462 |
|
Bar-Height
Patio Chair, Free Standing |
40 |
$462 |
|
Bar-Height
Patio Table, Free Standing |
70 |
$552 |
Welded
Rod |
|
Deck
Chair, Welded Rod, Free Standing |
25 |
$390 |
|
Bar-Height
Patio Chair, Free Standing |
40 |
$488 |
Laser |
|
Deck
Chair, Laser, Free Standing |
25 |
$488 |
|
Patio
Table, Laser Cut, Free Standing |
55 |
$585 |
|
Bar-Height
Patio Chair, Free Standing |
40 |
$585 |
|
Bar-Height
Patio Table, Free Standing |
70 |
$683 |
|
|
Polysteel
Specifications for Patio Tables and Chairs (standard height and bar height).
Plastisol specifications included. |
|
Specifications for
Patio Table
Expanded Metal Top: HR steel ¾ #9 standard expanded metal.
Laser Cut Steel Top: 14 gauge HR steel
Attached perimeter frame and supporting structure is made from HR steel.
A 2 schedule 40 pipe is welded in
the center of top. When coated will accept a 1.625 diameter umbrella
pole.
Legs: 1-1/4 pipe size tube
Specifications for Patio Chair
Expanded Seat: HR steel 3/4 #9 standard expanded metal.
Welded Rod Seat: .192 welded rod.
Laser Seat: 12 gauge HR steel.
Side frame: 1/4 HR plate, width frame of 3/16 x 1 HR
steel.
Legs: 3/4 pipe size tube
Pipe has no holes to allow access by bees or other insects.
Specifications for Plastisol (PVC) Poly-Vinyl Chloride Coating
Material: Plastisol (PVC) shall have:
Antimicrobial (non-leaching) to help prevent microbiological attack on the plastisol
(PVC) surface that
can
cause the loss of aesthetic appearance, mildew odors, embrittlement and
premature product failure.
Testing
Data available Per ASTM G21-90.
Tensile
strength of no less than 1800 psi per ASTM D412.
Elongation
of no less than 200% per ASTM D412
Tear
strength of no less than 300lb/in per ASTM D624.
Hardness
of 90 ± 5 (Durometer, Shore A (Instant)) per ASTM D2240.
Flammability Pass per FMVSS 302
UV
stabilized guaranteed to not show significant fading for 5
years per written warranty
Process: Prior to plastisol coating,
each part shall be chemically washed, dried, heated and coated in a heat
activated
primer and dried. After drying, each part shall be pre-heated in a convection
oven to a temperature
of
no less than 400° F, dipped into liquid Plastisol (PVC) and cured
in a convection oven at a
temperature
no less than 350° F. All parts shall have a coating thickness of
.125-.25.
Polysteel products are completely plastisol coated (frames and legs included)
with a thick, UV stabilized,
mold and mildew resistant plastisol coating which is compliant with worldwide
standards. Polysteel is
committed to being an environmentally conscious company and recognizes
the importance of being committed
to continually finding ways to support our environment. |
|
Champion Polysteel Tables,
Plastisol Coated, 1.9" OD Tubing, Coating of UV and Fungicide Protected
Plastisol,
Walk-Through Design for Comfortable Seating, Wide Base, Classic, Champion,
and Northwoods from your source
for material handling equipment. |
Back
to Product Category |
 |
|