
 |
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way
West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
 |
|
 |
Return
to All Kee Klamp Products
KEE
LITE ALUMINUM FITTINGS
|
|
|
|
|
HANDRAILS
LIGHTING GRIDS STORE FIXTURES PLAYGROUNDS
GUARD RAILS SET DESIGN & PROPS
|
|
|
|
|
 |
|
|
 |
|
Aesthetic look and design |
|
|
|
Light weight |
|
|
|
Corrosion resistant |
|
|
|
Large set screws resist thread stripping |
|
|
|
Low
long term maintenance |
|
|
|
Available
for Schedule 40 Pipe Sizes 1"-2" |
|
|
|
Recessed Set Screws for a Smooth
Look |
|
|
|
Cost
Effective Alternative to Welding |
|
|
|
WATER
TREATMENT FACILITIES CORROSIVE ENVIRONMENTS
INDUSTRIAL/COMMERCIAL
RETAIL & RESTAURANT DESIGN MUNICIPAL INSTITUTIONAL
|
|
|
KEE
LITE fittings are made from high-grade
Aluminum Silicon Magnesium alloy to provide you with a lightweight,
corrosion resistant and strong alternative for fabrication of
pipe structures. Kee Lite fittings offer you flexibility, to
be
used for a variety of applications from contemporary to industrial;
your imagination is the only limitation you have. |
|
Because
Kee Lite fittings can be easily installed with a hex key and
pipe cutters, there is no need to weld, thread or
drill, saving you both time and money. Kee Lite is securely
locked into place using recessed setscrews that provide
a smooth look to your rail system. |
|
PIPE
SIZE NOTE: Pipe sizes
are specified by the inside diameter. Refer to diagrames below
the price
chart to verify your outside diameter. |
|
Click
on button or text to jump to the product you desire.
|
|
|
 |
|
Order
Online, by Phone or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
|
|
Type
L10 - Single Socket Tee
|
Back
to Top |
 |
 |
|
|
|
|
|
Designed
to give a 90° butt joint between two
pipes. Frequently used for the joint between
end uprights and the middle rail where the site
is straight and level. Also used for base ties on
racking. This fitting cannot be used where the
pipe through the sleeve 'A' is required to be
joined within the fitting. |
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches
|
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L10-6 |
6 |
2.05 |
1.67 |
2.20 |
0.29 |
$11.81
|
L10-7 |
7 |
2.56 |
2.09 |
2.52 |
0.44 |
$14.86
|
L10-8 |
8 |
2.91 |
2.36 |
2.76 |
0.66 |
$19.12
|
L10-9 |
9 |
3.54 |
2.91 |
3.23 |
1.06 |
$38.02
|
|
Type
L14 - Straight Coupling
|
Back
to Top |
 |
 |
|
|
|
|
Designed
to give an in-line joint between tubes
of the same size. Frequently used to allow full
pipes to be used in railing applications.
Note:
It is not advisable to join the upper and
lower rails of a railing within the same bay.
|
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L14-6 |
6 |
1.97 |
3.94 |
1.67 |
0.40 |
$13.33
|
L14-7 |
7 |
2.32 |
5.12 |
2.09 |
0.73 |
$16.04
|
L14-8 |
8 |
2.56 |
5.83 |
2.36 |
0.82 |
$20.40
|
|
Type
L15 - 90 degree Elbow
|
Back
to Top |
 |
|
 |
|
|
|
|
|
A
90-degree elbow joint, most frequently used as
an end joint for the top rail of safety railings on a
level site.
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L15-6 |
6 |
2.05 |
1.67 |
2.20 |
0.31 |
$15.31
|
L15-7 |
7 |
2.56 |
2.09 |
2.32 |
0.62 |
$18.69
|
L15-8 |
8 |
2.91 |
2.36 |
2.56 |
0.88 |
$25.21
|
L15-9 |
9 |
3.54 |
2.91 |
3.07 |
1.46 |
$32.19
|
|
Type
L19 - Adjustable Side Outlet Tee
|
Back
to Top |
 |
 |
|
|
Used
to form variable angle joints between 60
and 200 degrees.
Note: Type L19 fittings are normally
used in pairs, and are sold, priced, and weighed
as such. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (pair) |
A |
B |
C |
L19-6 |
6 |
1.67 |
2.95 |
0.79 |
$32.42
|
L19-7 |
7 |
2.09 |
3.54 |
1.28 |
$44.20
|
L19-8 |
8 |
2.36 |
3.54 |
1.46 |
$45.89
|
|
Type
L20 - Side Outlet Elbow
|
Back
to Top |
 |
 |
|
|
A
90-degree corner joint most frequently used
for the top rail of safety railing. It can also be
considered for the corner joint of benches,
work tables, and other rectangular structures. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L20-6 |
6 |
2.05 |
1.67 |
1.97 |
0.42 |
$19.25
|
L20-7 |
7 |
2.56 |
2.09 |
2.32 |
0.77 |
$28.18
|
L20-8 |
8 |
2.91 |
2.36 |
2.56 |
1.1 |
$30.06
|
|
Type
L21 - Side Outlet Tee
|
Back
to Top |
 |
 |
|
|
|
|
Most
frequently paired with Type L20 to give
a 90-degree corner joint for the middle rail of
safety-railing and other rectangular structures.
The upright passes through the fitting. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L21-6 |
6 |
2.05 |
1.67 |
2.20 |
0.35 |
$17.74
|
L21-7 |
7 |
2.56 |
2.09 |
2.52 |
0.66 |
$24.07
|
L21-8 |
8 |
2.91 |
2.36 |
2.76 |
0.95 |
$30.35
|
|
Type
L25 - Three Socket Tee
|
Back
to Top |
 |
|
 |
|
|
|
|
|
Most
commonly used as the 90 degree joint
between the top rail and an intermediate upright
on safety railing. As there are two socket set
screws in the sleeve, this Kee Lite fitting can be
used where a join is required in the horizontal
pipe. The Type L10 fitting can be used as an
alternative when a join in the pipe is not required. |
|
|
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
L25-6 |
6 |
2.05 |
1.67 |
1.97 |
4.09 |
0.46 |
$17.91
|
L25-7 |
7 |
2.56 |
2.09 |
2.32 |
5.12 |
0.77 |
$22.37
|
L25-8 |
8 |
2.91 |
2.36 |
2.56 |
5.83 |
1.12 |
$28.10
|
L25-9 |
9 |
3.54 |
2.91 |
3.07 |
7.09 |
1.81 |
$40.55
|
|
Type
L26 - Two Socket Cross
|
Back
to Top |
 |
 |
|
|
|
|
Usually
paired with Type L25 to give a 90°
joint between the middle rail and an inter-
mediate upright on safety railing. The upright
passes through the fitting. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L26-6 |
6 |
1.67 |
2.20 |
4.09 |
0.37 |
$21.04
|
L26-7 |
7 |
2.09 |
2.52 |
5.12 |
0.62 |
$25.12
|
L26-8 |
8 |
2.36 |
2.76 |
5.83 |
0.99 |
$30.25
|
L26-9 |
9 |
2.91 |
3.23 |
7.09 |
1.46 |
$39.21
|
|
Type
L29 - 30° to 60° Single Socket Tee
|
Back
to Top |
 |
 |
|
|
|
|
This
adjustable fitting is most frequently used
for struts and braces. It can be used at any
selected angle between 30° and 60°. Suitable
for connecting an angled staircase rail to a
vertical upright. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
L29-7 |
7 |
3.23 |
3.74 |
1.06 |
2.07 |
0.70 |
$25.11
|
L29-8 |
8 |
3.66 |
4.25 |
1.18 |
2.32 |
0.90 |
$31.72
|
|
Type
L30 - 30° to 45° Adjustable Cross
|
Back
to Top |
 |
 |
|
|
|
|
This
adjustable fitting can be used for railing on
staircases between the mid-rail and intermediate
upright which is required to remain vertical. It
can be used at any selected angle between 30°
and 45°. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L30-7 |
7 |
8.46 |
2.07 |
2.13 |
1.15 |
$35.18
|
L30-8 |
8 |
9.65 |
2.34 |
2.36 |
1.52 |
$39.89
|
|
Type
L35 - Three Socket Cross
|
Back
to Top |
 |
 |
|
|
|
|
Most
frequently used to tie uprights with hori-
zontal pipes in three directions, all at 90 degrees
to the upright. The upright passes through the
fitting. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
L35-6 |
6 |
1.97 |
2.20 |
4.09 |
2.05 |
0.68 |
$27.54 |
|
|
Back
to Top |
 |
 |
|
|
|
|
Designed
to give a 90 degree offset crossover
joint. Frequently used on safety railing, where,
to reduce cost by minimizing the pipe cuts, a
continuous horizontal rail is used. Pipe cannot
be joined within this Kee Lite fitting. It may be
also used to give intermediate levels on racks. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
L45-6 |
6 |
1.73 |
1.57 |
0.26 |
$21.38
|
L45-7 |
7 |
2.13 |
1.97 |
0.68 |
$26.10
|
L45-8 |
8 |
2.40 |
2.20 |
0.77 |
$30.25
|
|
Type
L46 - Combination Socket Tee and Crossover
|
Back
to Top |
 |
 |
|
|
|
|
Used
on racking to join horizontal carrying rails
to the upright, leaving the socket to take a hori-
zontal tie across the section. For shelved racking,
it is usual to have the horizontal pipe outside the
upright. On pallet racking, it is preferable to have
the carrying rails inside the upright. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
L46-6 |
6 |
1.67 |
1.57 |
2.05 |
1.73 |
1.97 |
0.42 |
$25.45
|
|
Type
LC50 - Single Swivel Socket
|
Back
to Top |
 |
 |
|
|
|
|
|
Complete
Swivel Socket combination fitting consisting of LM50 and LF50. |
|
|
|
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Weight (lbs) |
Price (ea.) |
A |
B |
LC50-66 |
6 |
6 |
0.68 |
$23.18
|
LC50-77 |
7 |
7 |
0.90 |
$27.71
|
LC50-88 |
8 |
8 |
1.10 |
$30.89
|
|
Type
LF50 - Female Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
The
female part of a swivel fitting combination.
Used with the male LM50, LM51 and LM52 to
create complete swivel sockets. |
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
Ø |
LF50-6 |
6 |
1.97 |
1.67 |
2.95 |
2.09 |
0.38 |
0.37 |
$10.99
|
LF50-7 |
7 |
2.32 |
2.09 |
3.54 |
2.32 |
0.38 |
0.55 |
$13.66
|
LF50-8 |
8 |
2.56 |
2.36 |
3.54 |
2.64 |
0.38 |
0.64 |
$16.35
|
|
Type
LM50 - Male Single Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
The
male part of a swivel fitting combination.
This fitting can also be used to attach flat
panels to tubular structures. |
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
Ø |
LM50-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
0.38 |
0.26 |
$12.09
|
LM50-7 |
7 |
2.32 |
2.00 |
1.97 |
0.43 |
0.38 |
0.33 |
$13.00
|
LM50-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
0.38 |
0.44 |
$14.54
|
|
Type
LC51 - Double Swivel Socket
|
Back
to Top |
 |
 |
|
|
|
|
Complete
combination fitting consisting of two
LF50 and one LM51. For dimensions, see
LF50 and LM51. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
LC51-666 |
6 |
6 |
6 |
1.26 |
$40.88
|
LC51-777 |
7 |
7 |
7 |
1.61 |
$49.96
|
LC51-888 |
8 |
8 |
8 |
1.88 |
$53.91
|
|
Type
LM51 - Male Double Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
One
part of the LC51 combination fitting. This
can also be used for attaching flat panels to
tubular structures. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Rivet
Hole (in) |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
Ø |
LM51-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
1.67 |
0.38 |
0.35 |
$13.67
|
LM51-7 |
7 |
2.32 |
2.00 |
1.97 |
0.43 |
2.09 |
0.38 |
0.51 |
$19.68
|
LM51-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
2.36 |
0.38 |
0.60 |
$21.27
|
|
Type
LC52 - Corner Swivel Socket
|
Back
to Top |
 |
 |
|
|
|
|
Complete
combination fitting consisting of two
LF50 and one LM52. For dimensions, see
LF50 and LM52. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
LC52-666 |
6 |
6 |
6 |
1.30 |
$40.68
|
LC52-777 |
7 |
7 |
7 |
1.61 |
$49.68
|
LC52-888 |
8 |
8 |
8 |
1.88 |
$53.76
|
|
Type
LM52 - Male Corner Swivel Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
One
part of combination fitting LC52. This
fitting can also be used for attaching flat panels
to tubular structures. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Rivet
Hole (in) |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
Ø |
LM52-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
1.67 |
0.38 |
0.35 |
$13.66
|
LM52-7 |
7 |
2.32 |
2.00 |
1.97 |
0.43 |
2.09 |
0.38 |
0.51 |
$19.61
|
LM52-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
2.36 |
0.38 |
0.60 |
$21.20
|
|
Type
LB54 - Adjustable Elbow
|
Back
to Top |
 |
 |
|
|
|
|
A
swivel fitting designed as an in-line variable
angle connection, adjustable from 45° to 200°.
Nut and bolt are included. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
LB54-66 |
6 |
1.97 |
1.65 |
3.97 |
0.77 |
$26.59
|
LB54-77 |
7 |
2.28 |
2.17 |
4.69 |
1.43 |
$33.03
|
LB54-88 |
8 |
2.56 |
2.36 |
5.16 |
1.61 |
$41.62
|
|
Type
LC58 - Swivel Flange
|
Back
to Top |
 |
 |
|
|
|
|
A
swivel fitting for attachment of angled pipe
to a flat setting.
Warning:
This fitting is not recommended for
use as a base flange to support guardrailing or
balustrading.
|
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Fixing Hole (in) |
Weight (lbs) |
Price (ea.) |
A |
Ø |
LC58-6 |
6 |
0.45 |
0.74 |
$22.93
|
LC58-7 |
7 |
0.45 |
0.93 |
$29.27
|
LC58-8 |
8 |
0.45 |
1.23 |
$32.04
|
|
Type
LM58 - Male Wall Plate
|
Back
to Top |
 |
 |
|
|
|
|
This fitting may be
considered for various wall
and brace fixing applications. It is often combined
with Type LF50 to give an adjustable angle fitting
Type LC58. |
|
|
|
|
|
|
|
|
Model No. |
Inches |
Rivet
Hole (in) |
Fixing
Hole (in) |
Weight (lbs) |
Price (ea.) |
B |
C |
D |
E |
F |
Ø |
Ø |
LM58 |
3.38 |
1.32 |
0.31 |
2.07 |
1.78 |
0.38 |
0.45 |
0.37 |
$12.00
|
|
|
Back
to Top |
 |
 |
|
|
|
|
This
flange, with holes provided for countersunk
head fixing screws only, is used on structures
where the fixing is positional only. Frequently
used as a wall-fixing bracket. See Type L152
for a square based alternate to this fitting.
Warning:
It is not recommended for use as a
base flange to support guardrailing or balustrading.
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
Ø |
L61-6 |
6 |
1.67 |
1.97 |
0.31 |
3.94 |
1.93 |
0.25 |
0.46 |
$16.48
|
L61-7 |
7 |
2.09 |
2.17 |
0.31 |
4.33 |
2.40 |
0.25 |
0.64 |
$20.16
|
L61-8 |
8 |
2.36 |
2.36 |
0.31 |
4.72 |
2.64 |
0.25 |
0.71 |
$23.66
|
|
Type
L62 - Standard Railing Flange
|
Back
to Top |
 |
 |
|
|
|
|
Ideal
when a structural fixing is required. Type
L62 should always be used to fix down guard-
railing and balustrading. The holes are of suf-
ficient diameter to give a good fixing with either
a mechanical or chemical anchor. The two
socket set screws in the vertical socket give
greater stability to the upright. The fixing holes
in the flanges should be inline with the applied
load. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
G |
Ø |
L62-6 |
6 |
1.97 |
3.54 |
0.35 |
3.50 |
5.04 |
2.95 |
0.55 |
0.77 |
$21.91
|
L62-7 |
7 |
2.18 |
3.54 |
0.35 |
4.02 |
5.51 |
3.23 |
0.55 |
0.94 |
$24.09
|
L62-8 |
8 |
2.43 |
3.54 |
0.35 |
4.53 |
6.30 |
3.31 |
0.55 |
1.17 |
$28.09
|
|
|
Back
to Top |
 |
 |
|
|
|
|
Side
palm fixing for guardrailing and balust-
rading to walls, parapets, steps and ramps.
The upright cannot drop through the socket.
Warning:
If the upright is required to pass
through the fitting by machining out the base
stop, the bottom-fixing hole will be unusable.
|
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
G |
H |
Ø |
L68-6 |
6 |
1.67 |
2.80 |
2.52 |
0.95 |
2.95 |
3.98 |
0.31 |
0.45 |
0.53 |
$26.13
|
L68-7 |
7 |
2.09 |
3.39 |
3.15 |
1.10 |
3.50 |
4.45 |
0.31 |
0.45 |
0.77 |
$26.12
|
L68-8 |
8 |
2.36 |
3.78 |
3.62 |
1.22 |
3.94 |
5.04 |
0.31 |
0.45 |
0.95 |
$30.20
|
|
Type
L69 - Railing Flange With Toeboard Adapter
|
Back
to Top |
 |
 |
|
|
|
|
The
Type L69 fitting has been designed for
guardrailing and balustrading applications
and provides the added benefit of attaching
a kick plate to the base. The base plate holes
are of sufficient diameter to allow for attach-
ment with either a mechanical or chemical
anchor, the side plates have slotted holes to
allow for a degree of sideways movement for
ease of installation. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
D |
E |
F |
G |
H |
F |
K |
L |
M |
N |
P |
Q |
R |
Ø |
L69-8 |
8 |
0.39 |
0.59 |
6.30 |
3.54 |
3.15 |
4.41 |
2.28 |
0.79 |
0.45 |
5.12 |
1.97 |
0.31 |
2.24 |
0.45 |
1.65 |
$45.82 |
|
|
Back
to Top |
 |
 |
|
|
|
|
A
metal drive-in plug, which is difficult to
remove when installed. For proper insertion,
a rubber mallet should be used. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
L84-6 |
6 |
1.34 |
1.20 |
0.22 |
0.04 |
$4.23
|
L84-7 |
7 |
1.69 |
1.22 |
0.24 |
0.11 |
$6.53
|
L84-8 |
8 |
1.93 |
1.22 |
0.24 |
0.11 |
$7.58
|
|
|
Back
to Top |
 |
 |
|
|
|
|
An
internal swivel fitting, designed to
accomodate varying angles on handrailing to
staircases, ramps, or bracing. Used in
conjunction with types L10, L15, L25, or L45
it eliminates the need for specially drilled angle
fittings. Patent Pending. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
L114-6 |
6 |
1.69 |
2.20 |
1.77 |
1.26 |
0.40 |
$21.28
|
L114-7 |
7 |
2.09 |
2.52 |
1.69 |
1.57 |
0.64 |
$28.41
|
L114-8 |
8 |
2.36 |
2.76 |
1.81 |
1.57 |
0.78 |
$32.14
|
|
Type
L148 - Heavy Duty Rectangular Flange
|
Back
to Top |
 |
 |
|
|
|
|
Type
L148 is a structural base fixing used
to fix down guardrailing and balustrading.
This fitting is available with 2 or 4 fixing
holes which are of sufficient diameter to
give a good fixing with either a mechanical
or chemical anchor. The two socket set
screws in the vertical socket give greater
stability to the upright. It is recommended
that the fixing holes in the flanges should be
inline with the applied load. |
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
G
|
H |
J |
Ø |
L148-92 |
9 |
3.07 |
3.43 |
0.47 |
3.03 |
7.80 |
5.12 |
6.00 |
1.75 |
13/16 |
2.49 |
$73.51
|
L148-94 |
9 |
3.07 |
3.43 |
0.47 |
3.03 |
7.80 |
5.12 |
6.00 |
1.75 |
9/16 |
2.49 |
$82.77
|
|
Type
L150 - Heavy Duty 4 Hole Square Flange
|
Back
to Top |
 |
 |
|
|
|
|
A
heavy duty, four point fixing base flange.
Ideal when a structural fixing is required. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
Ø |
L150-8 |
8 |
2.56 |
3.00 |
0.51 |
5.00 |
3.50 |
0.45 |
1.61 |
$40.28
|
|
Type
L152 - 4 Hole Square Flange
|
Back
to Top |
 |
 |
|
|
|
|
A
four point fixing base or wall flange. See
L150 if a heavy duty version is required. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
Ø |
L152-6 |
6 |
1.97 |
1.81 |
0.25 |
2.99 |
2.06 |
0.31 |
0.35 |
$15.45
|
L152-7 |
7 |
2.32 |
2.17 |
0.31 |
3.35 |
2.38 |
0.45 |
0.59 |
$18.97
|
L152-8 |
8 |
2.56 |
2.56 |
0.31 |
3.62 |
2.63 |
0.45 |
0.68 |
$23.07
|
|
Type
L160 - Smooth Handrail Fitting
|
Back
to Top |
 |
 |
|
|
|
|
Designed
to provide attachment for a smooth
handrail. The fitting swivels allowing the handrail
to be placed at any angle. Installation instruc-
tions are available, contact us for the information. |
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
L160-7 |
7 |
2.32 |
1.57 |
0.39 |
1.57 |
2.52 |
0.24 |
$32.14
|
L160-8 |
8 |
2.32 |
1.57 |
0.31 |
1.57 |
2.64 |
0.22 |
$32.19
|
|
Type
L164 - Offset Wall Flange
|
Back
to Top |
 |
 |
|
|
|
|
This
fitting is designed for side palm fixing of
uprights to steel channels, walls, parapets, steps and
ramps.
The upright
cannont drop through the socket.
|
|
|
|
|
|
|
|
|
Model No. |
Pipe
ref. |
Inches |
Weight (lbs) |
Price (ea.) |
A |
B |
C |
D |
E |
F |
Ø |
L164-8 |
1.50" |
2.56 |
4.00 |
0.50 |
4.00 |
3.00 |
0.45 |
1.87 |
$60.14
|
|
|
|
|
|
|
|
|
|
Back
to Top
|
|
|
|
|
|
|
|
|
|
|
Pipe
Reference Chart |
Kee Lite Fittings are made from high grade
Aluminum Silicon Magnesium Alloy
Recommended set screw torque is 29 lbs./ft.
Minimum slip load capacity on Aluminum Schedule
40 pipe: 1,700 lbs. (safety factor = 2)
Minimum slip load capacity on steel Schedule
40 pipe: 2,000 lbs. (safety factor = 2)
Larger set screws are designed to resist thread
stripping
Minimum Material UTS: 33,000 PSI
All Kee Lite Fittings undergo independent
testing by TÜV |
|
|
|
Kee Lite
Pipe Size |
Nom.
Bore* in |
Pipe Dia.
O.D. in |
Fitting
I.D. in |
Tube Dia.
OD in |
6 |
1 |
1.32 |
1.38 |
1 5/16 |
7 |
1.25 |
1.66 |
1.72 |
1 5/8 |
8 |
1.50 |
1.90 |
1.94 |
1 7/8 |
9 |
2 |
2.38 |
2.41 |
2 3/8 |
|
|
|
|
*
Norminal Bore is an arbitrary dimension because the bore varies
with the wall thickness of the pipe. Pipe sizes are shown in
the table
and in the drawings below. |
|
|
|
|
|
|
Pipe
For Your Structure |
|
Structures
built using Kee Lite Fittings will require either
steel or aluminum pipe. We suggest using Schedule 40
Anodized Aluminum Pipe, Alloy 6105 - T5/6 which we
have in stock. Pipe is available for fittings sizes 6, 7, 8,
and 9 in either 24 foot or 12 foot long sections. We can
even cut pipe to your exact requirements. |
|
|
|
Kee
Lite Aluminum fittings are designed
to suit Schedule 40 (aluminum and steel),
pipe sizes 1" - 2". |
|
|
|
|
|
|
|
|
|
 |
|
Aluminum Fittings,
Aluminum Pipe Fitting, Aluminum Pipe Fittings, Aluminum Pipe
Railing, Kee Klamp, Kee Klamps, Pipe
Hand Rail, Pipe Handrail, Pipe Rail, Pipe Rail Fittings, Pipe
Railing, Slip on Pipe Fittings, and Kee Lite from your complete
source for material handling equipment.
|
Return
to All Kee Klamp Products |
 |
|