FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

512A MULTI-PURPOSE LIFTS

512a multi-purpose lifts multi-purpose lift maintenance lift
ERECTING THE
512A MODEL
TILT BACK POSITION

Four non-marketing composition casters swivel
to permit movement in any direction. Each caster
is equipped with simple locking devices. The two
10" x 2.75 semi-pneumatic tires touch the floor
only when tipped back. In this position, the lift
is quickly moved over soft and uneven ground.

The Model 512A set up
by one man to operate
as a 12 ft. lift.

In addition to heavy concentrated
loads, the Model 512A Lift can
also lift into place long fabricated
duct work, electrical bus duct,
I-beams, overhead doors, heavy
pipe, etc. On extra long pipe and
duct sections, two or more units
are employed.

The MODEL 512A will elevate 500 lbs. up to 12 ft. high. It can also be
converted to a 5, 8, or 9 ft. lift by simply removing or replacing the 3 and 4 ft.
slip-joint post section. As a 5 ft. lift, this model will pass through a doorway
exceeding (29" wide x 7' high). 2 ft. post sections shown on specifications page
are used for intermediate heights.
The platform of the MODEL 512A is 20" wide by 24" long. Load center
spaced on 12" from post. Capacity is decreased on loads extending over
12" center distance. Loads over 500 lbs. can be lifted with two or more units.
When the MODEL 512A is assembled as a 5 ft. lift, it can be tipped back on
the corrugated handle and rolled into a truck or Van.

WARNING: DO NOT USE EXTRA POSTS TO INCREASE THE
DESIGN MAXIMUM HEIGHT OF 12 FEET ON THE 512A LIFT.

material lifts work platform lifts
Specifications
CAPACITY - 500 lbs.
Base Overall Length - 60 1/2"
Base Overall Width - 29"
Base Overall Width
   w/Outriggers Extended
- 81"
Overall Height - 13' 10"
Overall Lifting Height - 12'
Platform - 24"x 20"

Two 512A lifts install crane on
bridge beam. Shop truck lifted
with crane and lowered afterward.
The 512A Lift becomes and excel-
lent elevator when attached to safe
way scaffolding. Corner brackets
shown below provide solid support.
512A COMES COMPLETE WITH:
super lift
L1
Tongue (with bolt & nut)
L2-3
3' Post
L2-4
4' Post
AL2-8
28" Winch Post
AL4-4
Winch Brace
L2-7
32" Post
3L10
3" Swivel Caster
L11-7-12
Winch Cable
L11-22
Gear and Bearing Grease
L60
Wheel and Axle assembly
AL110-12
Winch (with cable)
AL512B
Base (less casters and wheels)
AL512P
Platform
AL53
Outrigger
AL54
Top Pulley
O.A. Length 60 1/2 - O.A. Width 29"
O.A. Height - Add 22" to Lifting Height
Lifting Height up to 12 feet

ATTACHMENTS AND PRICES
lift attachments

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Description
Price
Lift Cap. 500# w/3" Caster
$3,667.90
Lift Cap. 500# w/5" Caster
$3,780.00
OPTIONAL ACCESSORIES AND REPLACEMENT PARTS
2' Post
$129.70
Platform Height Extension 24" High (Use one pair on each lift)
$389.20
Wheel and Axel Assembly
$312.80
5" Swivel Casters
$82.80
Platform Cover Plate - fits all models - use in lifting small items
$231.10
Tongue (w/Bolt and Nut)
$67.20
3' Post
$169.10
4' Post
$196.90
28" Winch Post w/Mounting Bracket & Tongue
$303.50
Winch Brace
$50.40
32" Top Pulley Post
$162.20
3" Swivel Caster
$66.00
Winch Cable
$119.30
Gear and Bearing Grease
$20.90
Winch (with Cable)
$1,010.10
Base (Less Casters and Wheels)
$908.20
Platform (Complete w/Rollers)
$973.00
Outrigger (Complete)
$189.40
Top Pulley (Complete)
$440.20
512A Multi-Purpose Lifts, Elevating Work Platform, Superlift, Installation Lifts, Maintenance Lifts, Material Lifts, Portable Lifts,
Super Hoist, and Vermette Lifts from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart