|
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
20
Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 In RI:(401) 272-4570 Fax:(401)
421-5679 |
|
|
|
Back
to Product Category
309 SERIES
DRUM TUMBLERS |
|
|
|
|
|
|
|
Thorough "corner-over-corner" mixing
action
Saves time, labor and money
Use a separate drum for each batch |
No container to purge between batches
Common drums make economical vessels |
|
|
|
|
|
|
Model
# 309-3 Drum Tumblr
shown with Control Package Option # CP-309-3-230 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Tumble
a closed plastic, steel, or fiber drum |
|
|
|
|
|
|
|
Mix products inside a drum |
|
Load
an upright drum
with your hoist or crane |
Secure
your drum in holder with
web strap and two top clamps |
|
|
29"
to 37" (74 to 94 cm) tall
18" to 23.5" (46 to 60 cm) diameter |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capacity: |
|
|
|
|
800 Lb. (363 kg) Full
Drum
400 Lb. (181 kg) Half-Full Drum |
|
|
|
|
|
|
|
|
|
Half-full
Capacity is an indication of the
capacity for tilting an unbalanced, bottom-
heavy drum. A partially full drum with an
unbalanced and shifting load is harder to
tilt than a full drum. |
|
|
|
|
|
|
Mixing
in a Closed Drum Means
Less Hazards |
|
|
|
Open the
hinged ratchet plate
and two top clamps, then load
a drum into the tumbler with
model 92 Below-Hook Drum
Lifter and your hoist or crane.
Or with your forklift, model
284 Fork Hook, and model 92
Below-Hook Drum Lifter (inset). |
|
|
|
|
|
|
Enjoy
the benefits of mixing inside closed
shipping drums. Eliminate worker exposure
to dangerous ingredients, spills and risk of
contamination. Mix right inside a sealed
drum with a Morse Drum Tumblr. |
|
Secure
the drum in the tumbler
using the web strap and ratchet
around the drum, and tightening
the two top clamps. Then turn the
motor on to begin drum tumbling. |
|
|
|
|
|
|
|
|
|
|
|
|
|
DIMENSIONS
OF 309 SERIES DRUM TUMBLR |
|
|
|
|
|
OPTIONS |
|
|
|
|
|
CONTROL
PACKAGES (sold separately) |
|
|
|
|
|
|
|
|
AC
Control Packages
NEMA 4/12 for NON-Hazardous Areas
(sold separately) |
|
Include
a Control Mast and the appropriate Control
Box for each model. Use power controls to start and
stop drum tumbling. The control mast can be positioned
outside the safety enclosure on either the left or right
side, or at the back of Drum Tumbler. |
|
|
|
|
|
|
|
|
|
|
|
|
Includes
Control Mast and Control Box with:
Timer adjusts from a few seconds to 16 hours
Start and Stop Buttons
Variable Speed - Control drum rotation from
2 to 20 RPM
Red Emergency Stop Button
Lockable Fused Disconnect to shut off and lock
out power to the unit
24V DC Control Supply
Wire terminals for external connection of safety
interlock switch |
|
|
|
Explosion
Proof AC Control Packages
NEMA 7/9 for Hazardous Areas
(sold separately) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes
Control Mast and Control Box with:
Start and Stop Buttons
Run / Jog Selector Switch |
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
PRICING
FOR DRUM TUMBLR 309 SERIES & CONTROL PACKAGE OPTIONS |
Note: All Models have a Domestic Shipping Weight of 638 lbs and
Domestic Shipping Dimensions of 72"L x 42"W x 46"H. |
Model
No. |
Price |
Motor
Style |
Phase |
Motor
Voltage |
Hertz |
Amp
Draw |
Drum
RPM |
Control
Package Model No. |
Price |
|
$7,102 |
Inverter
Duty |
3 |
230,
460 |
50Hz,
60Hz |
2.8 |
14
RPM Standard;
2 to 20 Variable RPM w/Control Package |
|
$3,955 |
1.4 |
|
$3,920 |
|
$3,920 |
|
$3,990 |
|
$7,798 |
Explosion
Proof ** |
1 |
115,
230 |
60Hz |
13 |
14 |
|
$5,979 |
6.5 |
|
$5,277 |
|
$8,266 |
Explosion
Proof ** |
1 |
110,
220 |
50Hz |
6.2 |
12 |
|
$5,277 |
|
$8,325 |
Explosion
Proof ** |
3
| 208,
230, 460 |
60Hz |
3.8/3.6 |
14 |
|
$5,873 |
1.8 |
|
$5,873 |
|
$8,266 |
Explosion
Proof ** |
3 |
230,
400 |
50Hz |
3.45 |
12 |
|
|
2.2 |
1.8 |
|
$8,459 |
Explosion
Proof ** |
3 |
575 |
60Hz |
1.5 |
14 |
|
$5,873 |
|
$7,558 |
Air
Motor *** |
- |
- |
- |
- |
14
(Vary W/Air Flow & Pressure) |
*** |
- |
|
*
ONLY NON-Explosion Proof AC Control Packages include a pre-wired control
box. Models with explosion
proof Control Packages have no wiring from the NEMA 7/9 control box to the
motor. Please consult an electrician
to complete the wiring in accordance to your local code.
** Explosion Proof motors on models 309-E1 and 309-E1-50 are rated for Class
1 Group D. Other Explosion Proof
motors are rated for Class I Group D, and Class II Groups F and G.
*** Air powered models require plant air at 40 to 60 psi and flowing at
a rate of 40 scfm. Filter, Regulator, Lubricator
and valve are included with Control package Option # CP-309-A. |
|
|
|
Air
Controls Include: |
|
|
|
|
|
- Filter,
Regulator and Lubricator (FRL)
- On / Off Valve
Air Powered Drum Tumbler (model 309-A) rotates a drum
at 14 RPM and allows you to vary RPM with air flow and pressure. |
|
|
|
|
ENCLOSURES
WITH SAFETY INTERLOCK |
Comply
with OSHA Requirements (Enclosure Kits Sold
Separately) |
|
|
|
|
|
Enclosures for Morse
Drum Tumblers have a safety
interlock to automatically shut off the drum rotator
when the gate is opened. Open the enclosure gate,
place your drum onto the drum rotator, then close
the gate to allow operation. Connections are
included for air powered models only. Customer
to provide controls and connections for 1-phase
and 3-phase AC models. |
|
|
|
Install
all Drum Rotators in accordance with
OSHA requirements for enclosure and safety
interlock, etc. Drum rotator automatically turns
off when enclosure door is opened. For OSHA
compliance, see OSHA subpart O.1910.212(a)(4)
"Barrels, containers, and drums. Revolving drums,
barrels, and containers shall be guarded by an
enclosure which is interlocked with the drive
mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in
place." Power connections and motor controls must
comply with applicable codes. |
|
|
|
|
|
|
|
Sold as Three
Separate Parts:
1. Drum Tumbler
2. Control Package
3. Enclosure with Safety Interlock
Enclosure outside post-to-post dimensions:
L76" x W52" x H63.25" (193 x 132 x 161 cm) |
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
PRICING
FOR ENCLOSURES WITH SAFETY INTERLOCK MODELS |
Model
No. |
Description
(Drum Roller Sold Separately) |
Gate
Switch |
Domestic
Shipping Weight |
Domestic
Shipping Dimensions |
Price |
|
Fits
model 309-3 Drum Tumbler |
AC |
400
lbs |
101"L
x 31"W x 66"H |
$4,446 |
|
Fits
model 309-E1 or 309-E1-50 Drum Tumbler |
AC |
400
lbs |
101"L
x 31"W x 66"H |
$5,125 |
|
Fits
model 309-E3 or 309-E3-50 Drum Tumbler |
AC |
400
lbs |
101"L
x 31"W x 66"H |
$5,125 |
|
Fits
model 309-A Drum Tumbler |
Air |
400
lbs |
101"L
x 31"W x 66"H |
$5,031 |
|
|
Drum Tumblers, Drum Rotators,
Dumpers, End-Over-End Rotator, Mixing, Morse Model 309, Mix, Blend, Tumble,
Barrel Dumpers, Drum Handlers, Drum Handling, and Drum Lifting from your
source for material handling equipment. |
Back
to Product Category |
|
|