 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679 |
|
|
|
|
Back
to Product Category
|
ZIG-ZAG
|
|
NO.
2035 CONTINUOUS OVERHEAD POWER CHAIN CONVEYOR
|
|
|
|
|
| The
Original Enclosed Track Conveyor |
|
|
 |
Zig-Zag conveyor is constructed of standard, modular
components that guarantee easy installation, modification
and maintenance. Standard components also guarantee
quick accessibility . |
|
|
|
|
|
 |
|
|
|
|
|
|
NO.
2035 ZIG-ZAG CONVEYORS
|
|
|
 |
|
|
|
|
|
|
|
FEATURES:
|
| ELEVEN
STANDARD COMPONENTS |
|
VERTICAL
CHAIN WHEELS ON 6" CENTERS |
Straight Track, 3/16" thick, stocked in 10' lengths |
|
Spread the same amount of load over more wheels |
|
Welding Jig |
|
Reduce the point loading on track and reduce wear |
|
Horizontal Curves, 3/16" thick, 90°, flame hardened
|
|
CAPACITIES |
|
Top Vertical Curves, 3/16" thick, 90°, flame hardened
|
|
75 lbs. per load pin |
|
Bottom Vertical Curves, 3/16" thick, 90°, flame hardened |
|
Standard drive packages up to 750 lb. chain pull |
|
Conveyor Chain, 6" pitch |
|
|
|
|
Take-up Assembly |
|
|
|
|
Inspection Section |
|
|
|
|
Chain Oiler |
|
|
|
|
Standard Drive Packages |
|
|
|
|
Load Pendant Attachments |
|
|
|
|
|
BRACKETS
|
|
|
|
|
|
|
|
|
|
 |
 |
|
 |
|
|
SUPPORT
BRACKET
|
|
JOINT
BRACKET
|
|
TRACK
WELDING JIG
|
|
|
PRICING
FOR TRACKS AND BRACKETS
|
|
Part No. |
Description |
Weight/lbs. (ea.) |
Price per 10' length |
|
2035.00471 |
Track (10'-0" Lengths) |
50 |
$137 |
|
2035.00804 |
Track 11 Ga. (10'-0" Lengths) |
35 |
$112 |
|
2035.00446 |
Twisted Track (90º Clockwise) |
50 |
$240 |
|
2035.00447 |
Twisted Track (90º Counter Clockwise) |
50 |
$240 |
|
2035.01912 |
Support Bracket |
2 |
$21 |
|
2035.00021 |
Joint Bracket |
3 |
$83 |
|
2035.00155 |
Track Welding Jig |
1.5 |
$143 |
|
|
|
CONVEYOR
CHAIN
|
|
|
|
 |
|
2035.01974
CHAIN
|
|
Zig-Zag
chain is made with heavy steel stampings with a
hardened inner race. Precision alloy balls make Zig-Zag chain
rugged and durable for prolonged dependable life and
operation. |
|
FEATURES |
|
6"
Pitch Chain |
|
Zig-Zag
chain has a pitch of 6" and is the shortest in the
industry. This allows up to 33 percent more productivity. The
pitch of our chain allows you to space load pendants closer
with less wheel loading, allowing for more product throughput.
This shorter pitch also allows for tighter radius horizontal
curves. We can provide standard stock 18" radius horizontal
curves. |
|
|
 |
|
|
Load
Pin |
|
Zig-
Zag chain is manufactured with a pendant load pin.
Unlike the industry, our pendants are mounted to a load pin
and not the wheel axle. This eliminates unnecessary wear and
torsional loads to critical parts of the chain, thereby increasing
your productivity and decreasing your downtime. |
|
Installation
and Maintenance |
|
By
design, Zig-Zag chain is made for ease of installation and
maintenance. Our chain may be disassembled at any point by
simply removing a cotter pin. Zig-Zag chain is available from
stock in 10' boxes or in bulk 300' barrels. |
|
|
|
|
PRICING
FOR STANDARD CONVEYOR CHAIN
|
| Part
No. |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.01974E |
Conveyor
Chain, 10' Long, Caged Bearings |
33 |
$414 |
| 2035.01974.300E |
Conveyor
Chain, 300' Length (6 pieces @50' each), CB |
990 |
$12,420 |
|
|
|
STANDARD
CURVES
|
|
|
|
|
|
| VERTICAL
CURVES |
|
 |
|
The
illustration shows the action of the wheels and the manner in
which they
bear against the inside of the track when going around vertical
curves. The
wheels, you will note, contact the top of the track on bottom
curves and the
bottom of the track on top curves. The chain, in this way, is
guided around
short radius vertical curves. |
|
|
| HORIZONTAL
CURVES |
|
|
The
illustration shows how the chain passes around horizontal curves
without
the use of special guides, sprockets, or wheel turns. |
|
|
Please
note from the cutaway section how the lateral wheels bear on
the side
of the track when the chain is drawn around curves. A series
of wheels
constantly share the load imposed upon the track, thereby reducing
friction
and insuring smooth conveyor operation. |
|
|
|
2035.00980
Top Vertical Curve
|
|
Curves
with these radius are standard:
1'-6",2'-0", 2'-3", 3'-0", 3'-3", 4'-0"
and 4'-3". |
|
|
|
|
|
|
 |
|
NOTE:
All curves up to 3'-0" are available hardened for increased
life and
made of heavy-duty 3/16" material, heaviest in the industry. |
|
|
|
|
|
|
 |
|
|
|
Looking
through side of track. Track cut-away of
chain passing through reverse vertical curve. |
|
|
|
|
|
2035.00981
Bottom Vertical Curve
|
|
 |
|
|
|
|
|
|
|
|
|
 |
|
Looking
through top of track. Track cut-away to
give bird's eye view of chain in track, illustrating
operation in horizontal curve. |
|
|
|
|
|
2035.01352
Horizontal Curve
|
|
|
|
|
|
|
|
PRICING
FOR STANDARD HORIZONTAL CURVES
|
| Part
Number |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.02064 |
Curve 1'-6"
R x 90º (hardened) |
15 |
$323 |
| 2035.02748 |
Curve 2'-0"
R x 30º |
6 |
$160 |
| 2035.02749 |
Curve 2'-0"
R x 45º |
8 |
$195 |
| 2035.01352 |
Curve 2'-0"
R x 90º (hardened) |
15 |
$270 |
| 2035.02679 |
Curve 2'-0"
R x 180º (hardened) |
30 |
$558 |
| 2035.01354 |
Curve 2'-3"
R x 90º (hardened) |
18 |
$272 |
| 2035.01338 |
Curve 3'-0"
R x 90º |
24 |
$296 |
| 2035.01341 |
Curve 3'-3"
R x 90º |
26 |
$311 |
| 2035.01344 |
Curve 4'-0"
R x 90º |
32 |
$315 |
| 2035.01347 |
Curve 4'-3"
R x 90º |
34 |
$317 |
|
|
|
PRICING
FOR STANDARD VERTICAL CURVES
|
| Part
Number |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.01167 |
Bottom Vertical
Curve 9" R x 180º (non-hardened) |
9 |
$426 |
| 2035.02756 |
Top Vertical
Curve 2'-0" x 30º |
6 |
$154 |
| 2035.02758 |
Bottom Vertical
Curve 2'-0" x 30º |
6 |
$154 |
| 2035.02757 |
Top Vertical
Curve 2'-0" x 45º |
8 |
$189 |
| 2035.02759 |
Bottom Vertical
Curve 2'-0" x 45º |
8 |
$189 |
|
2035.00980 |
Top Vertical
Curve 2'-0" R x 90º |
25 |
$298 |
| 2035.00981 |
Bottom Vertical
Curve 2'-0" R x 90º |
25 |
$298 |
| 2035.02304 |
Top Vertical
Curve 4'-0" R x 90º |
53 |
$679 |
| 2035.02305 |
Bottom Vertical
Curve 4'-0" R x 90º |
53 |
$679 |
|
| NOTE:
All horizontal curves are cut off at the tangents and do not
include any straight track. |
|
|
FIELD
FABRICATED CURVES
|
|
|
|
|
| VERTICAL
CURVE DATA |
|
 |
|
|
|
|
Note:
The Vertical Curve dimensions in the chart
below are based on using 2'-0" radius curves. |
|
|
|
|
|
| 45°,
2'-0" radius vertical curve shown. |
|
|
|
|
|
|
A |
30° |
45° |
60° |
|
B |
C |
D |
B |
C |
D |
B |
C |
D |
|
6 7/16" |
0'-0" |
2'-0" |
2'-1 1/8" |
- |
- |
- |
- |
- |
- |
|
9" |
0'-5 1/8" |
2'-4 7/16" |
2'-6 1/4" |
- |
- |
- |
- |
- |
- |
|
12" |
0'-11 1/8" |
2'-9 5/8" |
3'-1/4" |
- |
- |
- |
- |
- |
- |
|
1'-2" |
1'-3 1/8" |
3'-1 1/8" |
3'-4 1/4" |
1/16" |
2'-9 15/16" |
3'-1 11/16" |
- |
- |
- |
|
1'-6" |
1'-11 1/8" |
3'-8 1/16" |
4'-1/4" |
5 9/16" |
3'-1 7/8" |
3'-7 1/4" |
- |
- |
- |
|
1'-9" |
2'-5 1/8" |
4'-1 1/4" |
4'-6 1/4" |
9 13/16" |
3'-4 7/8" |
3'-11 1/2" |
- |
- |
- |
|
2'-0" |
2'-11 1/8" |
4'-6 7/16" |
5'-1/4" |
1'-2 1/6" |
3'-7 7/8" |
4'-3 3/4" |
0'-1/16" |
3'-5 9/16" |
4'-2 1/4" |
|
2'-3" |
3'-5 1/8" |
4'-11 5/8" |
5'-6 1/4" |
1'-6 5/16" |
3'-10 7/8" |
4'-8" |
0'-3 7/16" |
3'-7 5/16" |
4'-5 3/4" |
|
2'-6" |
3'-11 1/8" |
5'-13/16" |
6'-1/4" |
1'-10 9/16" |
4'-1 7/8" |
5'-1/4" |
0'-6 15/16" |
3'-9 1/16" |
4'-9 3/16" |
|
2'-9" |
4'-5 1/8" |
5'-10" |
6'-6 1/4" |
2'-2 13/16" |
4'-4 7/8" |
5'-10 1/8" |
0'-10 3/8" |
3'-10 3/4" |
5'-11/16" |
|
3'-0" |
4'-11 1/8" |
6'-3 3/16" |
7'-1/4" |
2'-7 1/16" |
4'-7 7/8" |
5'-8 3/4" |
1'-1 7/8" |
4'-1/2" |
5'-4 1/8" |
|
3'-6" |
5'-11 1/8" |
7'-1 5/8" |
8'-1/4" |
3'-3 1/2" |
5'-1 7/8" |
6'-5 3/16" |
1'-8 13/16" |
4'-3 15/16" |
5'-11 11/16" |
|
4'-0" |
6'-11 1/8" |
8'-0" |
9'-1/4" |
4'-1/16" |
5'-7 7/8" |
7'-1 11/16" |
2'-3 11/16" |
4'-7 7/16" |
6'-6" |
|
4'-6" |
7'-11 1/8" |
8'-10 3/8" |
10'-1/4" |
4'-8 1/2" |
6'-1 7/8" |
7'-10 13/16" |
2'-5/8" |
4'-10 7/8" |
7'-15/16" |
|
5'-0" |
8'-11 1/8" |
9'-8 13/16" |
11'-1/4" |
5'-5 1/16" |
6'-7 7/8" |
8'-6 11/16" |
3'-5 9/16" |
5'-2 3/8" |
7'-7 13/16" |
|
5'-6" |
9'-11 1/8" |
10'-7 13/16" |
12'-1/4" |
6'-1 7/16" |
7'-1 7/8" |
9'-3 1/8" |
4'-1/2" |
5'-5 13/16" |
8'-2 3/4" |
|
6'-0" |
10'-11 1/8" |
11'-5 9/16" |
13'-1/4" |
6'-9 15/16" |
7'-7 7/8" |
9'-11 5/8" |
4'-7 7/16" |
5'-9 5/16" |
8'-9 11/16" |
|
6'-6" |
11'-11 1/8" |
12'-3 15/16" |
14'-1/4" |
7'-6 7/16" |
8'-1 7/8" |
10'-8 1/8" |
5'-2 3/8" |
6'-3/4" |
9'-4 5/8" |
|
7'-0" |
12'-11 1/8" |
13'-2 3/8" |
15'-1/4" |
8'-2 15/16" |
8'-7 7/8" |
11'-4 5/8" |
5'-9 5/16" |
6'-4 3/16" |
9'-11 9/16" |
|
7'-6" |
13'-11 1/8" |
14'-3/4" |
16'-1/4" |
8'-11 3/4" |
9'-1 7/8" |
12'-1 1/8" |
6'-4 3/16" |
6'-7 11/16" |
10'-6 1/2" |
|
8'-0" |
14'-11 1/8" |
14'-11 1/8" |
17'-1/4" |
9'-7 7/8" |
9'-7 7/8" |
12'-9 9/16" |
6'-11 1/8" |
6'-11 1/8" |
11'-1 3/8" |
|
8'-6" |
15'-11 1/8" |
15'-9 1/2" |
18'-1/4" |
10'-4 3/4" |
10'-1 7/8" |
13'-6 1/16" |
7'-6 1/16" |
7'-2 5/8" |
11'-8 5/16" |
|
9'-0" |
16'-11 1/8" |
16'-7 15/16" |
19'-1/4" |
11'-7/8" |
10'-7 7/8" |
14'-2 9/16" |
8'-1" |
7'-6 1/16" |
12'-3 1/4" |
|
9'-6" |
17'-11 1/8" |
17'-6 5/16" |
20'-1/4" |
11'-9 5/16" |
11'-1 7/8" |
14'-1 1/16" |
8'-7 15/16" |
7'-9 1/2" |
12'-10 3/16" |
|
10'-0" |
18'-11 1/8" |
18'-4 11/16" |
21'-1/4" |
12'-5 13/16" |
11'-7 7/8" |
15'-7 1/2" |
9'-2 7/8" |
8'-1" |
13'-5 1/8" |
|
10'-6" |
19'-11 1/8" |
19'-3 1/8" |
22'-1/4" |
13'-2 5/16" |
12'-1 7/8" |
16'-4" |
9'-9 3/4" |
8'-4 7/16" |
14'-1/16" |
|
11'-0" |
20'-11 1/8" |
20'-1 1/2" |
23'-1/4" |
13'-10 13/16" |
12'-7 7/8" |
17'-1/2" |
10'-4 11/16" |
8'-7 15/16" |
14'-7" |
|
11'-6" |
21'-11 1/8" |
20'-11 7/8" |
24'-1/4" |
14'-7 1/4" |
13'-1 7/8" |
17'-9" |
10'-11 5/8" |
8'-11 3/8" |
15'-1 7/8" |
|
12'-0" |
22'-11 1/8" |
21'-10 1/4" |
25'-1/4" |
15'-3 3/4" |
13'-7 7/8" |
18'-5 7/16" |
11'-6 9/16" |
9'-2 7/8" |
15'-8 13/16" |
|
12'-6" |
23'-11 1/8" |
22'-8 11/16" |
26'-1/4" |
16'-1/4" |
14'-1 7/8" |
19'-1 15/16" |
12'-1 3/8" |
9'-6 5/16" |
16'-3 3/4" |
|
|
|
TAKE-UP
ASSEMBLIES
|
|
|
|
|
|
| 2035.01687
FRAMED TAKE-UP |
|
|
|
Ready
to be hoisted and hung, this frame provides a rigid
base and helps make alignment positive. The frame is
permanently mounted; only the actuator and conveyor move.
Tensioning is accomplished with your choice of screw, spring,
or air cylinder packages listed below. Available for 2'-0"
R
curves (4' maximum track spread). |
|
Note:
Complete unit consists of one frame and one set of
hardware for screw, spring or air take-up. |
|
|
|
|
 |
|
Some
type of tensioning is necessary on all Zig-Zag
conveyor systems to take up slack chain created by wear or
temperature changes. We make screw take-up fittings for
field assembly. |
|
|
|
|
|
|
|
 |
|
|
|
|
TAKE-UP
FITTINGS AND EXPANSION SLEEVE
|
|
|
|
 |
|
2035.00583
SCREW
TAKE-UP FITTINGS
(1'-6" Travel) |
|
|
|
2035.02497
AIR
TAKE-UP FITTINGS
(1'-0" Travel) |
|
|
|
NOTE:
Curves are not included in
assembly. |
|
|
|
2035.00583
|
|
|
|
|
|
|
 |
|
2035.0114
EXPANSION SLEEVE |
|
Expansion
sleeves are used mainly in bake ovens and are located
in each track in the area of the oven expansion joint. This
allows
both oven and conveyor to expand and contract in unison. Many
ovens, depending on length and temperature, do not have
expansion joints. In such cases, it is often advisable to use
an
expansion sleeve at the exit and entrance tracks to prevent
snaking or waviness in the track both inside and outside the
oven. |
|
|
|
|
Relative
to installation, the movable track in the sleeve should be
moved out 2" from the compressed length which would then
be
an overall of 1'-6" instead of 1'-4" as shown. This
allows for both
contraction and expansion in the track. |
 |
|
|
|
|
|
PRICING
FOR STANDARD TAKE-UP FITTINGS
|
| Part
Number |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.01168 |
Short Screw
Take-Up Sleeve Assembly (need 2 per take-up) |
10 |
$445 |
|
2035.00583 |
Screw Take-Up
Fittings |
80 |
$1,533 |
| 2035.02497 |
Air Take-up
Fittings |
85 |
$3,240 |
| 2035.01687 |
Framed Take-Up
Basic Assembly |
185 |
$2,632 |
| 2035.02685 |
Screw Take-Up
Package |
10 |
$216 |
| 2035.02686 |
Spring Take-up
Package |
19 |
$333 |
|
2035.01700 |
Air Take-up
Package |
55 |
$1,302 |
| 2035.02574 |
Limit Switch
Package (1 Limit Switch w/Bracket) |
10 |
$724 |
| 2035.01114 |
Expansion
Sleeve |
8 |
$265 |
|
|
SKELETON
DRIVE
|
|
|
|
|
|
The
2035.01373 skeleton drive unit incorporates the use of a
caterpillar drive chain connection to the head shaft and idler
shaft assembly. The skeleton drive is not equipped with a
motor, reducer, friction clutch, driven sprocket, or roller
chain. |
|
 |
|
The
skeleton drive unit is used in Zig-Zag, Twin-Trak and
OveR-Way applications. Most commonly, the unit is used
where the customer needs to replace their existing drive, but
wants to use the existing motor, reducer, and sprockets.
The skeleton is also used where the customer wants to
supply his own motor, reducer, and sprockets. The unit can
be used with an extended head shaft and jackshaft to join
two or more conveyors together for timing purposes. |
|
|
|
2035.01373
(shown with Chain Guards)
|
|
|
|
|
|
 |
|
|
2035.01373
(shown without Chain Guards)
|
|
|
|
|
| The
capacity of the unit is 750 lbs. Chain Pull. |
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
PRICING
FOR DRIVE UNITS
|
|
Part Number |
Description |
Weight/lbs.
(ea.) |
Price |
|
2035.01371 |
Drive Unit (Variable Speed 3 to 16 F.P.M. when used with
A.C. Inverter Control listed below)
230/460/3/60 T.E.F.C. 3/4 H.P. Motor NOTE: at 60 cycle
line current constant speed 16 F.P.M. |
305 |
$8,047 |
|
2035.01372 |
Drive Unit (Variable Speed 9 to 45 F.P.M. when used with
A.C. Inverter Control listed below)
230/460/3/60 T.E.F.C. 1-1/2 H.P. Motor NOTE: at 60 cycle
line current constant speed 45 F.P.M. |
315 |
$8,470 |
|
2035.01373 |
Skeleton Drive Unit |
215 |
$5,150 |
|
2035.02769 |
Encoder Adapter |
- |
$653 |
|
2035.02718 |
Skeleton Drive Unit with Ext. Shaft |
- |
$5,271 |
|
2035.02714 |
Lift up Drive Unit (16 F.P.M.) 230/460/3/60 T.E.F.C. 3/4
H.P. Motor |
325 |
$10,698 |
|
2035.02715 |
Lift up Drive Unit (45 F.P.M.) 230/460/3/60 T.E.F.C. 1
1/2 H.P. Motor |
335 |
$11,187 |
|
2035.02722 |
Drive Unit with Ext. Shaft (16 F.P.M.) |
- |
$8,984 |
|
2035.02723 |
Drive Unit with ext. Shaft (45 F.P.M.) |
- |
$9,464 |
|
Special |
Drive Unit (Non-Standard Speed Max. 90 F.P.M.) Variable
5:1 speed range when used
with the proper AC Inverter Control listed below |
- |
Consult Us |
|
NOTE:
All motors are 230/460 volts, 3 phase, 60 hertz, but inverters
require 230 volts, 3 phase input power. Check with us for other
current
characteristics. |
|
|
LUBRICATION
AND INSPECTION SECTION
|
|
|
|
|
The
proper lubrication of the conveyor chain is of paramount importance
not only to the successful operation of a conveyor system, but
to the life
of the product as well. Proper lubricant should be recommended
by a
qualified lubricating engineer who has made a study of the processing
machinery and atmospheric conditions to which the system will
be
subjected. Special safeguards must be taken to protect the chain
when
it moves through high temperatures, extremely low temperatures,
acid
conditions such as bonderizing, alkaline washers, or other chemicals
which could reduce the life of the bearings and other parts.
We caution
against the use of graphite based lubricants which tend to build
up
excessive deposits of foreign matter unless the chain is thoroughly
cleaned at regular intervals. We urge the use of our sanitary
hook in acid
or paint spray conditions. |
|
 |
|
|
2035.02724
Automatic Timer
Controlled Lubricator
|
|
| No.
2035.02724 Automatic Timer Controlled Lubricator |
|
|
This
automatic timer controlled lubricator is designed to precisely
lubricate the critical bearing points of the conveyor chain.
It has five
nozzles, located to dispense lubricant on the vertical and lateral
wheel
bearings, vertical link pin and roller. Each nozzle has its
own adjustable
valve to control the amount of lubricant that is dispensed.
It is equipped
with a 168 hour adjustable timer which can be set for as little
as 20
minutes out of 168 hours of conveyor operation. |
|
|
|
|
|
|
 |
|
| No.
2035.00669 Electro-Brush Oiler |
|
|
The
illustration shows the brush type oiling device. The brush makes
contact with the chain, distributing the lubricant to the various
parts.
A 115 volt solenoid shut-off valve is provided at the bottom
of the
tank reservoir. |
|
|
| No.
2035.00664 Brush Oiler (Not Shown) |
|
|
The
brush oiler applies lubrication to the chain by gravity feed.
The
brush makes contact with the chain, distributing the lubricant
to the
various parts. A toggle shut off at the top of the reservoir
is provided.
NOTE: We do not recommend this oiler in finishing systems. |
|
|
|
2035.00669
Electro-Brush Oiler
|
|
|
|
|
|
|
|
|
| No.
2035.00820 Inspection Track Section |
|
|
|
The
inspection track section, formed out of this 3/16" track,
facilitates
inspection and maintenance at points other than the drive unit.
It may be
placed in any run of straight track. This section is made with
the top and
sides open down to the center of the chain. This allows for
full inspection
of the chain for proper lubrication, chain tension, and general
condition of
the conveyor chain. The opening is covered by a removable housing
and
is equipped with a handle. The inspection section also permits
easy
installation and removal of chain. The most desirable location
is at the
lowest point between the output of the drive unit and the take-up
unit.
The inspection section is furnished in a standard finish to
match the rest
of the system. |
|
 |
|
|
2035.00820
Inspection Section
|
|
|
|
|
The
inspection section is used in all Zig-Zag, Twin-Trak, and OveR-Way
systems. In certain applications, such as a large system, it
may be
desirable to use several inspection sections. |
|
|
|
|
|
PRICING
FOR LUBRICATION AND INSPECTION SECTION
|
|
Part No. |
Description |
Weight/lbs. (ea.) |
Price |
|
2035.00664 |
Brush Type Oiler |
13 |
$601 |
|
2035.00669 |
Electro Brush Oiler, 120 Volt |
14 |
$924 |
|
2035.00276 |
Brush Only (for repair, all brush oilers) |
0.2 |
$59 |
|
2035.02724 |
Automatic Chain Pin and Wheel Lubricator w/115 Volt Timer
for Auto On-Off Control |
55 |
$5,602 |
|
2035.00820 |
Inspection Section |
16.5 |
$241 |
|
|
|
2035
STANDARD LOAD PENDANTS
|
|
|
|
|
 |
|
We
have developed a series of standard
load carrying devices designed to cover
the essential requirements for connecting
the load to the conveyor chain. |
 |
|
Since
the ultimate device required to
carry the load on the conveyor must be
specially designed to fit the article which
is being handled, it is almost impossible to
illustrate a load pendant for every
problem. It is also desirable in many
cases to experiment with various types of
load carriers before finding the one most
satisfactory for the job. |
|
2035.00319
Standard Clevis Load
Pendants, Capacity 75 lbs.
|
|
|
|
|
|
Almost
any type of load suspension fitting can be attached to the 2035.00319
clevis pendant. |
|
|
|
|
|
 |
|
 |
|
 |
|
Part
2035.00318
|
|
Part
2035.00316
|
|
Part
2035.00317
|
|
Straight
Side Pendant
|
|
Rigid
Clevis Pedant
|
|
Rigid
Straight Side Pendant
|
The
Straight Side Pendant is similar to the
Standard Clevis Pendant except the pendant
sides are straight. It uses a scissor like
action to attach directly to the load pin on the
vertical link of the conveyor chain. The
pendant may be spaced on multiples of 6".
The pendant is furnished in a zinc plated
finish. This type of pendant is used where it
is permitted to have swinging loads. The
pendant is allowed to pivot, as the conveyor
makes elevation changes. |
|
The
Rigid Clevis Pendant is designed to be
used where a swinging load may be
objectionable. This pendant is similar to the
Rigid Straight Side Pendant except there is
an offset in the pendant sides to allow for a
1/4" gap. The pendant may be spaced on
multiples of 6". The pendant is furnished in
a zinc plated finish. This pendant always
remains perpendicular to the track. The
pendant can be attached to a load bar or
directly to a product rack. |
|
The
Rigid Straight Side Pendant is similar to
the Rigid Clevis Pendant except the sides are
straight. It may be spaced on multiples of 6".
It attaches directly to the load pin on the
vertical link of the conveyor chain and is
furnished in a zinc-plated finish. This pendant
may be used where a swinging load may be
objectionable or not permitted. The pendant
always remains perpendicular to the track. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
 |
|
|
|
 |
|
|
No.
2035.00264 Rigid
"V" Pendant
|
|
No.
2035.02706
Suspension
Indexing Load Hook
|
|
|
No.
2035.02693 Single
Suspension Indexing
Load Hook
|
|
|
No.
2035.02775
Swivel Fixture
|
|
|
Capacity
75 lbs. Max.
|
|
|
|
|
|
Capacity
75 lbs. Max.*
|
|
|
Standard
offset of 8" as shown
may be increased on special order
to 11" maximum for vertical travel
or any desired offset for
horizontal travel, and
decreased to a minimum
of 3 1/4". |
|
Capacity
75 lbs.
|
|
|
Capacity
75 lbs.
|
|
|
|
This
fixture permits continuous
rotation of a product through a
finishing operation by
permitting the ball-bearing
roller to turn against a
continuous flat bearing strip,
through the turning area. |
|
|
|
The
load hook illustrated
above is used to carry loads
that must be indexed from time
to time by the operator at 90°.
Bottom of track to throat of
hook 3/8". |
|
|
The
pendant is a two piece
design with the rigid pendant
and cast hook assembly. The
pendant may be spaced on
multiples of 6". This pendant
is used in "Zig-Zag"
applications where the load
must be manually or
automatically indexed in 90°
increments. |
|
|
|
|
|
|
|
|
|
|
|
*Where
unit loads are less than
8 lbs. minimum preloading is
recommended to insure smooth
rotation. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
 |
|
|
No.
2035.00257 DOUBLE
SUSPENSION LOAD HOOK
|
|
No.
2035.02772 DOUBLE
SUSPENSION LOAD
BAR ASSEMBLY
|
|
No.
2035.02702 DOUBLE
SUSPENSION LOAD
HOOK ASSEMBLY
|
|
Capacity
150 lbs.
|
|
|
The
load is suspended from two vertical load
units increasing the capacity of the load
carrier. Standard clevis pendants are attached
to the conveyor chain on 6" centers. The
load hook revolves freely. |
|
|
|
Capacity
150 lbs. per assembly
|
|
Capacity
150 lbs. per assembly
|
|
By
suspending the load from two points on the
chain, the load carrying capacity is increased.
This pendant can be attached to the conveyor
chain on a minimum of 12" centers. The basic
load bar assembly provides a means of attaching
a product hook or clevis directly to the center
hole. |
|
By
suspending the load from two points
on the chain, the load carrying capacity is
increased. This pendant can be attached to
the conveyor chain on a minimum of 12"
centers. The Load Hook assembly is used
for finishing applications where the load
must be manually indexed in 90°
increments. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
No.
2035.02699 DOUBLE SUSPENSION ROTATING STAR INDEXING PENDANT
|
|
No.
2035.00430 MULTIPLE
SUSPENSION LOAD HOOK
|
|
|
Capacity
150 lbs. for manual indexing
|
|
Capacity
300 lbs.
|
|
Distance
from bottom of track to throat of hook is 8 7/8".
This pendant can be used to manually index or automatically
index the part. This pendant can be used with a Rotating Cam
or Continuous Rotating Cam, permitting automatic rotation
and indexing in increments of 90°. The pendants and load
bar
have a zinc plated finish while the hook assembly is finished
in Gloss-Tek powder coat. This pendant is most commonly
used for finishing applications where it is necessary to rotate
the part. This pendant assembly can be spaced on 6"
increments with a minimum of 12" centers. |
|
By
suspending the load from four points on the chain,
the load carrying capacity is increased again. Standard
clevis pendants are attached at four points to each
vertical link pendant, and the load bar is free to swivel
so that there will be no binding action when going
around curves. Bottom of track to throat of hook is
9 1/16" |
|
|
|
|
|
|
PRICING
FOR 2035 STD LOAD PENDANTS
|
| Part
No. |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.00201 |
Holdback
Dog |
0.5 |
$35.00 |
| 2035.00257 |
Double Suspension
Load Hook |
2 |
$60.00 |
| 2035.00264 |
"V"
Pendant-8" Drop (standard) |
1.8 |
$53.00 |
| 2035.00316 |
Rigid Clevis
Pendant |
0.5 |
$10.00 |
| 2035.00317 |
Rigid Straight
Side Pendant |
0.5 |
$10.00 |
| 2035.00318 |
Straight
Side Pendant |
0.5 |
$8.00 |
| 2035.00319 |
Standard
Clevis Pendant |
0.5 |
$8.00 |
| 2035.00430 |
Multiple
Suspension Load Hook |
9.5 |
$242.00 |
| 2035.01115 |
Holdback
Dog Spring |
0.1 |
$9.00 |
| 2035.01155 |
Malleable
Iron Pusher Dog |
3 |
$132.00 |
| 2035.01157 |
Rivet for
Holdback Dog |
0.5 |
$0.80 |
| 2035.01188 |
Delatching
Pusher Dog |
4 |
$158.00 |
| 2035.02693 |
Single Suspension
Indexing Load Hook Assembly |
0.5 |
$77.00 |
| 2035.02694 |
Pendant
Assembly for Cast Hook |
0.5 |
$25.00 |
| 2035.02775 |
Spin Hook
Pendant |
0.5 |
$10.00 |
| 2035.02772 |
Double Suspension
Load Bar Assembly |
2 |
$43.00 |
| 2035.02699 |
Double Suspension
Indexing Hook Assembly |
3 |
$168.00 |
| 2035.02702 |
Double Suspension
Rotating Hook Assembly |
1.5 |
$138.00 |
| 2035.02706 |
Single Suspension
Load Hook Assembly |
0.5 |
$65.00 |
| 97100.73 |
Touch-Up
Paint |
1 |
$10.50 |
|
|
|
PRICING
FOR HORIZONTAL TRACTION WHEEL TURNS
|
| Part
No. |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.02012 |
Traction
Wheel Turn 24" Dia. X 180º |
100 |
$2,850 |
| 2035.02011 |
Traction
Wheel Turn 30" Dia. X 180º |
130 |
$2,939 |
|
2035.02010 |
Traction
Wheel Turn 36" Dia. X 180º |
160 |
$3,694 |
|
|
|
PRICING
FOR GRAVITY LOOP CHAINS
|
| Part
No. |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.01096 |
Gravity
Loop Chain with Pendants, 10'-0" Coils |
38 |
$572 |
|
|
|
PRICING
FOR A.C. INVERTER CONTROLS
|
|
Part No. |
Description |
Weight/lbs.
(ea.) |
Price |
|
2035.02798 |
A.C. Inverter Control, 3/4 H.P. Input Voltage: 208/230V;
3 Phase (1) 2035.01371 Drive Unit |
6 |
$1,871 |
|
2035.02799 |
A.C. Inverter Control, 1.5 H.P. Input Voltage: 208/230V;
3 Phase (1) 2035.01372 Drive
Unit or (2) 2035.01371 Drive Units |
8 |
$2,075 |
|
2035.02800 |
A.C. Inverter Control, 3/4 H.P. Inverter 460V; 3 Phase
(1) 2035.01371 Drive Unit |
6 |
$1,821 |
|
2035.02801 |
A.C. Inverter Control, 3 H.P. Inverter 460V; 3 Phase (3)
2035.01371 Drive Unit or
(2) 2035.01372 Drive Units |
10 |
$2,800 |
|
2035.02802 |
A.C. Inverter Control, 1.5 H.P. Inverter 460V; 3 Phase
(1) 2035.01372 Drive Unit or
(2) 2035.01371 Drive Units |
8 |
$2,202 |
|
2035.02803 |
A.C. Inverter Control, 5 H.P. Input Voltage: 460V; 3 Phase
(3) 2035.01372 Drive Units |
10 |
$3,350 |
|
2035.02804 |
A.C. Inverter Control, 3 H.P. Input Voltage: 230V; 3 Phase
(2) 2035.01372 Drive Units or
(3) 2035.01371 Drive Units |
8 |
$2,672 |
|
|
|
|
|
|
|
|
PRICING
FOR DRIVE ADDITIONS
|
|
|
|
2035.01371
|
2035.01372
|
|
|
Explosion
Proof Motor |
Add |
$1,110
|
$1,110
|
|
|
Motor
Brake |
Add |
$850
|
$980
|
|
|
Clutch
Brake |
Add |
$3,080
|
$3,080
|
|
|
Conveyor,
Enclosed Track Conveyors, Overhead Conveyors, Overhead Power
Chain Conveyor, Safe-Rail,
Conveyors, and Zig-Zag from your source for material handling
equipment. |
Back
to Product Category |
 |
|
