FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679
Home Index Order Search Quote Info About Us Services
Back to Product Category
VERTICAL-LIFT DRUM POURERS
Lift, move and pour a heavy drum up to 106" high
You control the lift height and pouring angle
Powered lift and tilt options
Available built-in weighing capability
Weigh as you pour!
Now you can lift, tilt and drain drum contents with ease. A hydraulic lift
and tilt system makes it simple to raise and tilt heavy drums. Vertical lifting
track keeps drum reach constant through the full lift range. Dispense into
a vat, hopper, mixer or other container up to 106" high. Manual lift and tilt
also available. With Scale-Equipped Series, you know the weight of what
you have poured! The digital indicator keeps you informed of the drum
weight. You will be able to weigh even while pouring.
Power Lift and Power Tilt Options make drum handling easier and faster.
There are separate hand controls for the power-lift and for power-tilt
functions. Power-Lift Options ease drum lifting, but retain manual tilt
control with pull chain and chain wheel tilt control.
Power options are indicated by the 3-digit suffix on model numbers.
All power options must be ordered on new units from the factory.
Available Built-In Weighing Capability
N-Type Scale
Economical general
purpose instrument for
use in a variety of
weighing applications.
NOT for use in hazardous
areas. Powered by six
ordinary alkaline D-cell
batteries.
T-Type Scale
Two Types of Scales
are simple to use and to
read. They enable accurate
batching by weight. Both
have touch pads that
include numbers for tare
entry. Four load cells
accurately sense the weight
regardless of the tilt angle
of the drum. Battery saving
"sleep" mode turns indicator
off when scale is not in use.
Features an intrinsically
safe, ultra low power
indicator which is Factory
Mutual approved for use
in many hazardous areas,
and approved for all
classes, groups and
divisions of N.E.C.
hazardous environment
classifications. The hand
pumped or air powered
drum handler with this
intrinsically safe weighing
system may be used in
many hazard areas where
ordinary electric powered
equipment would be
prohibited. Note: Models
with AC or DC powered lift
and tilt options are NOT for
hazard areas.
• Display weight to 0.1 Lb.
Accuracy of +/-0.2 %
Handle drum to 800 Lb.
Scale components will be
installed and calibrated
before leaving the Morse
factory. However, the
rigors of transportation may
change scale calibration. To
assure proper accuracy, the
user should employ local
scale service personnel to
check the function and
calibration of the scale.
Cost of on-site calibration
is not included in the
selling price.
1. Digital scale indicator
2. Lift and tilt controls
Vertical-Lift Drum Pourers
are available with optional
spark resistant monel parts,
such as drum holder bands.
3. Hydraulic pump
4. Two 6" polyolefin swivel casters
5. Two 8" Polyolefin Wheels
6. Load Cells At Four Places (on scale equipped models only)

PRICING FOR VERTICAL-LIFT DRUM POURERS
WHEN ORDERING: Add option # to Model #, then add the two prices together. Example: Model #510 + Option #110 = Model # 510-110
VERTICAL-LIFT WITH AC POWER-LIFT & TILT
MODEL NO. DESCRIPTION PRICE
510 VERT LIFT, 60", MANUAL-LIFT & TILT $5,306
510M VERT LIFT, 60", MANUAL-LIFT & TILT, SPARK RESISTANT Upon Request
515-N VERT, SCALE, 60" MANUAL-LIFT & TILT $14,625
515-T VERT, SCALE, 60" MANUAL-LIFT & TILT $16,965
515M-T VERT, SCALE, 60" MANUAL-LIFT & TILT, SPARK RESISTANT Upon Request
520 VERT LIFT, 106" MANUAL-LIFT & TILT $6,494
520M VERT LIFT, 106" MANUAL-LIFT & TILT, SPARK RESISTANT Upon Request
525-N VERT, SCALE, 106", MANUAL-LIFT & TILT $16,263
525-T VERT, SCALE, 106", MANUAL-LIFT & TILT $18,018
525M-T VERT, SCALE, 106", MANUAL-LIFT & TILT, SPARK RESISTANT Upon Request
"T" in Model # = Intrinsically safe scale indicator.
"N" in Model # = NOT for hazardous areas.
POWER LIFT AND TILT OPTIONS PRICING
Power Option
Number
Description Motor Type Motor Control Ship Wt.
Adder
Price
110 AC Power Lift and Tilt 1HP/115V/60Hz AC Switch, Cord, Plug 100 Lb. $2,574
114 Air Power Lift and Tilt Air, Vane Type Optional FRL* 95 Lb. $2,633
115 Battery Power Lift and Tilt 12V, DC** Built-in 160 Lb. $2,603
120 AC Power Lift, Manual Tilt 1HP/115V/60Hz AC Switch, Cord, Plug 50 Lb. $1,082
124 Air Power Lift, Manual Tilt Air, Vane Type Optional FRL* 45 Lb. $1,141
125 Battery Power Lift, Manual Tilt 12V, DC** Built-in 110 Lb. $1,112
*FRL = Filter, Regulator, Lubricator with Valve (order #3869-P).
**Includes charger for wall or shelf mount.
Model Numbers AC Motor *
Powered
Hydraulic
Lift & Tilt
Air Motor
Powered
Hydraulic
Lift & Tilt
12V DC**
Powered
Hydraulic
Lift & Tilt
AC Motor *
Power
Hydraulic
Lift, Manual
Tilt***
Air Motor
Power
Hydraulic
Lift, Manual
Tilt ***
12V DC **
Power
Hydraulic
Lift, Manual
Tilt ***
Manual
Hydraulic
Lift, Manual
Tilt ***
Scale
Equipped
Single-Stage
60" Lift
515-N-110 515-T-114
515-N-114
515M-T-114
515-N-115 515-N120 515-T-124
515-N-124
515M-T-124
515-N-125 515-T
515M-T
515-N
Two-Stage
106" Lift
525-N-110 525-T-114
525-N-114
525M-T-114
525-N-115 525-N-120 525-T-124
525-N-124
525M-T-124
525-N-125 525-T
525M-T
525-N
Non Scale Equipped Single-Stage
60" Lift
510-110 510-114
510M-114
510-115 510-120 510-124
510M-124
510-125 510
510M
Two-Stage
106" Lift
520-110 520-114
520M-114
520-115 520-120 520-124
520M-124
520-125 520
520M
“T” in Model # = Intrinsically safe scale indicator for hazardous environment.
“N” in Model # = NOT for hazardous areas.
“M” in Model # = Model with park resistant parts such as drum holder bands made of monel.
* Standard motors are TEFC, 1HP for 115V AC, 60 Hz.
** 12V DC power option includes battery and 110V AC charger.
*** Manual tilt control for 510 and 515 Series is hand crank. Manual tilt control for 520 and 525 Series is chainwheel and pull-chain.


The Bracket Assembly provides a brace
at top and bottom of your drum to prevent it
from slipping lengthways through the drum
holder. The Bracket Assembly is required
to handle a rimless plastic drum, and
recommended to more securely handle
a fiber drum. It adjusts for 31” to 39” tall
drum.
ACCESSORIES
Drum Cones to control pouring
and reduce dust while
dispensing dry material from
your drum. Start and stop
dispensing with a slide gate
or iris valve. Cones, and Clamp
Collars to secure them to the
drum top, are available for
a steel or fiber drum 15.5" to
23" diameter. They are
available with 45° or 60° angle
and made of regular or
stainless steel. New plastic
drum cones, made of non-
corroding polyethylene, have
an asymmetric design to
optimize product flow.
Part # 4556-P Bracket Assembly.
Part # 4556M-P Spark Resistant Bracket
Assembly.
The Top Rim Clamp grips the upper rim
of your drum to prevent it from slipping
through the drum holder. Use to handle
a 55-gallon rimmed plastic or fiber drum.
To handle a 55-gallon plastic drum with
top rim, you must install either the Bracket
Assembly or the Top Rim Clamp.
Part # 4560-P
Rim Clamp Assembly.
Part # 4560M-P Spark Resistant
Rim Clamp Assembly.
Stainless Steel Drum Cones
For your smaller drum, install the correct size
Diameter Adaptor
inside the MORcinch
drum holder. They install easily without tools
and are quickly removed.
All Vertical-Lift Drum Pourers accept Diameter
Adaptors for drums from 14” to 20.5” diameters.
Those for 17.5” diameter or smaller have brackets
at top and bottom of the drum, which adjust for a
drum up to 38” tall. Spark resistant and stainless
steel Diameter Adaptors are also available.
Model 5SS-SG-45-23 Stainless Steel Drum Cone
with Slide Gate and Model 7SS-23 Clamp Collar
to secure cone on drum.
We recommend the MORStop Tilt-Brake to
automatically stop and hold the drum tilt angle on
models with manual tilt control! It functions
smoothly and quietly in both directions. Without
the MORStop Tilt-Brake, a heavy unbalanced
drum may tilt out of control.
Part # 3900i-P Factory installed on new unit with manual tilt.
Kit # 3900-P For field installation on manual tilt models.
PRICING FOR DRUM CONES AND CLAMP COLLARS
Model No. Description Price
5-60-23 CONE, 60 DEGREE, SIZE #23 $445
5-IV-60-23 CONE, IRIS VALVE, 60 DEGREE, SIZE #23 $1,519
5-SG-60-23 CONE, SLIDE GATE, 60 DEGREE, SIZE #23 $562
5-VF-60-23 CONE, VALVE FLANGE, 60 DEGREE, SIZE #23 $474
5SS-60-23 CONE, STAINLESS STEEL, 60 DEGREE, SIZE #23 $1,112
5SS-IV-60-23 CONE, STAINLESS STEEL, IRIS VALVE, 60 DEGREE, SIZE #23 $2,040
5SS-SG-60-23 CONE, STAINLESS STEEL, SLIDE GATE, 60 DEGREE, SIZE #23 $1,310
5SS-VF-60-23 CONE, STAINLESS STEEL, VALVE FLANGE, 60 DEGREE, SIZE #23 $1,100
7-23 CLAMP COLLAR, SIZE #23 $222
7SS-23 CLAMP COLLAR, STAINLESS STEEL, SIZE #23 $480
Drum cones with 45 degree angle are also available at the same cost as above. Drum cones available for variety of drum diameters.
PRICING FOR OPTIONS & ACCESSORIES
Diameter
Adaptors
PRICE Spark Resistant
Dia. Adaptors
PRICE Stainless Steel
Dia. Adaptors
PRICE Fits
Diameter
SHIP
WEIGHT
55/30-20.5 $163.80 55/30M-20.5 Call us 55/30SS-20.5 Call us 21.5” to 22” 11 Lb.
55/30-19 $163.80 55/30M-19 Call us 55/30SS-19 $327.60 20” to 20.5” 20 Lb.
55/30-17.5 $210.60 55/30M-17.5 Call us 55/30SS-17.5 Call us 18.5” to 19” 24 Lb.
55/30-16 $210.60 55/30M-16 Call us 55/30SS-16 Call us 17” to 17.5” 35 Lb.
55/30-14.5 $210.60 55/30M-14.5 Call us 55/30SS-14.5 Call us 15.5” to 16” 35 Lb.
Part # Descriptions Price
4556-P Bracket Assembly, Adjust for 31" to 39" tall drum $157.95
4556M-P Spark Resistant Bracket Assembly, Adjust for 31" to 39" tall drum $458.27
4560-P Top Rim Clamp Assembly $228.15
4560M-P Spark Resistant Rim Clamp Assembly $612.37
3900-P Kit, MORstop Tilt-Brake for field installation $228.15
3900i-P Option, MORstop Tilt-Brake, factory installed $228.15
Drum Pourers, Morse, Drum Grabs, Drum Handlers, Drum Handling, Drum Lifters, Barrel Handling, Drum Carriers,
Drum Dumpers, Drum Handling Equipment, Drum Lift, Drum Lifting Equipment, and Drum Stackers from your source
for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Index - Order - Search - Quote - Info - About Us - Services