 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401)
421-5679 |
|
|
|
|
Back
to Product Category
STAGEMAKER®
- CONFIGURATION B:
LOW VOLTAGE CONTROL |
|
|
|
|
|
Configuration
B utilizes low voltage control. The hoist (SM1, SM5, SM10) is
equipped so it can be mounted in
inverted or normal position. Controller furnished separately.
A "pickle", which is used during stage setup, can
be
connected directly to the low voltage hoist control. The SM16,
SM20 and SM25 hoists must always be mounted
in the normal position and are furnished with pushbutton pendant
controller with E-stop.
|
|
|
|
|
|
 |
|
HOIST
FEATURES |
|
•
Compact - for better space utilization on stage, in trusses
and
on the truck.
• Quiet Operation - can even use during performances.
• 5 - pocket load wheel provides exceptionally smooth
operation and reduced chain wear.
• Anti-jam chain guide for precise chain alignment.
• Increased Safety - with combined load limiter / brake.
• 80 micron thick black epoxy paint finish.
• Class F insulated Hoisting Motor |
|
|
|
•
Electromechanical disk brake.
• Solid-state brake control
• 360° upper / lower hook rotation.
• Vinyl chain container.
• Black load chain (SM1, SM5, SM10).
• Electro-zinc load chain (SM16, SM20,
SM25).
• Ergonomic handles (SM1, SM5, SM10).
• 230V - 3Ph - 60Hz power supply.
• Pressure cast aluminum body. |
 |
|
|
|
|
|
|
|
|
| CONTROLLERS |
|
|
ACCESSORIES |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
•
4, 8 or 12 channel controller with remote configured for
combined power / control or separate power and
control. |
|
|
|
|
|
|
•
Motor Cables
• Single and twin flight cases (SM5,
SM10 only) |
|
•
Pistol-grip pushbutton controller or "Pickle" (SM1,
SM5,
SM10) with pigtail (standard pigtail length is
18", longer
lengths available). Plug is optional. |
|
|
|
|
|
|
•
Pushbutton controller with E-Stop
button (SM16, SM20, SM25).
|
|
|
|
|
|
| NOTE:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
A mainline contactor is not furnished on SM1 hoists.
• Mainline contactor is specially wired so it is always
energized
when power to the hoist (SM5 and SM10 only) is
applied.
• The mainline contactor in the hoist control panel for
the SM16,
SM20, SM25 hoists is controlled by the E-Stop on
the
pushbutton controller. |
|
|
See
bottom of page for
Controllers, Accessories
and Options pricing.
|
|
|
|
| ERGONOMIC
HANDLES |
|
SAFE,
SMOOTH OPERATION |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Folding
transport handles facilitate handling.
(Inverted position only.) The hoist body is
pressure-molded aluminum which reduces
weight. Heat sink ribs on the motor body
ensure efficient heat dissipation. The hoist is
protected by 80-micron dark epoxy paint. |
|
 |
|
The
heat treated load wheel with
5 full pockets is machined in a
single production step. The black
load chain is grade 80. The 5
pocket load wheel minimizes
chain stress while ensuring
smooth operation. A one piece
internal chain guide and external
chain guide prevent the chain
from jamming, no matter what
the position of the hoist. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| QUIET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
The
revolutionary gearbox contributes
to the compact hoist design and provides
an exceptionally low noise level, average
dB rating less than 75 dB (IP55/ NEMA
3R). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMPACT,
EASY MAINTENANCE |
|
|
|
|
|
|
|
|
|
|
 |
|
Large
integral steel panel encloses all
electrical components and offers
space for additional options. The
panel also provides easy access for
maintenance operations. (IP55/NEMA
3R). |
|
|
|
|
|
|
|
|
|
|
| CHAIN
BAG |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
High-capacity,
high strength, removable
chain bag made of high grade black
fabric, 900 deniers, reinforced with
1" wide rugged nylon strips. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHAINFLUX |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This
high strength industrial polymide chain guide provides a
remarkably low friction coefficient, facilitating passage of
the chain
on ejection. Its special shape provides a much more fluid horizontal
flow of the chain as it comes off the load wheel. A number of
technical advantages are provided by this innovated ejection
system.
It prevents chain jamming at the upper part of the hoist as
the chain
is ejected as well as guiding the chain into the chain bag and
reduces
contact area between hoist body and chain.
(SM5 & SM10 Inverted position only.) |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
HOIST
DIMENSION DRAWING
|
|
 |
|
|
|
CONFIGURATION
B TECHNICAL DATA:
|
Capacity
Tons |
Model |
Speed
(fpm) |
Falls |
Dimensions
(in) |
Power
(HP) |
Nominal
Current
230 V |
Weight
of Unit
(1) (lbs) |
Chain
weight
(lb/ft) |
|
A |
B |
C |
|
1/16 |
SM1 068 M2-B |
32 |
1 |
12 1/4 |
8 1/2 |
12 1/4 |
0.33 |
2 |
29 |
0.148 |
|
1/16 |
SM1 0616 M1-B |
64 |
1 |
12 1/4 |
8 1/2 |
12 1/4 |
0.33 |
2 |
29 |
0.148 |
|
1/8 |
SM1 128 M1-B |
32 |
1 |
12 1/4 |
8 1/2 |
12 1/4 |
0.33 |
2 |
29 |
0.148 |
|
1/4 |
SM5 254 M1-B |
16 |
1 |
16 1/4 |
9 1/4 |
16 |
0.65 |
2 |
58 |
0.363 |
|
1/4 |
SM5 258 M1-B |
32 |
1 |
16 1/4 |
9 1/4 |
16 |
1.3 |
4 |
58 |
0.363 |
|
1/4 |
SM5 2516 M1-B |
64 |
1 |
16 1/4 |
9 1/4 |
16 |
1.3 |
4 |
58 |
0.363 |
|
1/2 |
SM5 504 M1-B |
16 |
1 |
16 1/4 |
9 1/4 |
16 |
0.65 |
2 |
58 |
0.363 |
|
1/2 |
SM5 508 M1-B |
32 |
1 |
16 1/4 |
9 1/4 |
16 |
1.3 |
4 |
58 |
0.363 |
|
1/2 |
SM10 5016 M1-B |
64 |
1 |
19 |
11 3/4 |
19 1/4 |
2.8 |
7.2 |
113 |
0.726 |
|
1 |
SM10 1004 M1-B |
16 |
1 |
19 |
11 3/4 |
19 1/4 |
1.4 |
3.6 |
113 |
0.726 |
|
1 |
SM10 1008 M1-B |
32 |
1 |
19 |
11 3/4 |
19 1/4 |
2.8 |
7.2 |
113 |
0.726 |
|
1 1/2 |
SM16 1608 M1-B |
32 |
2 |
20 1/4 |
14 |
22 |
5.6 |
15.4 |
243 |
1.209 |
|
2 |
SM10 2002 M1-B |
8 |
2 |
19 |
11 3/4 |
21 3/4 |
1.4 |
3.6 |
125 |
0.726 |
|
2 |
SM10 2004 M1-B |
16 |
1 |
19 |
11 3/4 |
21 3/4 |
2.8 |
7.2 |
125 |
0.726 |
|
2 |
SM20 2008 M1-B |
32 |
1 |
20 1/4 |
14 |
23 1/4 |
5.6 |
15.4 |
243 |
1.209 |
|
2 1/2 |
SM25 2506 M1-B |
25 |
1 |
20 1/4 |
14 |
23 1/4 |
5.6 |
15.4 |
243 |
1.209 |
|
5 |
SM25 5003 M1-B |
12.5 |
2 |
20 1/4 |
14 |
23 1/4 |
5.6 |
15.4 |
243 |
1.209 |
|
(1) approximate weight without chain |
|
|
| CONFIGURATION
B OPTIONS: |
|
•
Fixed body hook (SM5 and SM10)
• Upper and lower (weight-operated) limit switches - normal
position only
• Self locking hook (SM5 and SM10)
• Geared limit switch
• Second brake (SM5 and SM10)
• Steel control enclosure for SM1
• Vinyl rain cover
• Drain hole in the load sprocket compartment (SM5 and
SM10 only)
• Power pigtail - no plug (standard pigtail length is 18",
longer lengths available) |
•
Control pigtail - no plug (standard pigtail length is 18",
longer lengths available)
• Power & control pigtail length is 18", longer
lengths available
• Twist-Lock male plug for power pigtail
• 7 pin Socapex male plug for power & control pigtail
• Twist-Lock female receptacle for control pigtail
• Mating plug/receptacle for the supplied plug
• Custom plug for pigtail
• 460V - 3Ph - 60Hz or 208V - 3Ph-60Hz power supply |
|
|
PRICING
FOR STAGEMAKER CONCERT HOISTS
|
|
CONFIGURATION
B
CONCERT HOIST WITH LOW VOLTAGE CONTROL - INVERTED OR NORMAL
POSITION
|
Capacity
Tons |
Model |
Speed
(fpm) |
Falls |
Unit Wt.
lbs. (*) |
Load Chain
Wt. (lbs/ft) |
Hoist with
65 ft. of Lift |
Hoist Body
w/o Load Chain |
Load
Chain
Price/ft (**) |
|
1/16 |
SM1 068 M2-B |
32 |
1 |
29 |
0.148 |
$1,653 |
$1,301 |
$5 |
|
1/16 |
SM1 0616 M1-B |
64 |
1 |
29 |
0.148 |
$1,681 |
$1,329 |
$5 |
|
1/8 |
SM1 128 M1-B |
32 |
1 |
29 |
0.148 |
$1,710 |
$1,358 |
$5 |
|
1/4 |
SM5 254 M1-B |
16 |
1 |
58 |
0.363 |
$2,145 |
$1,723 |
$6 |
|
1/4 |
SM5 258 M1-B |
32 |
1 |
58 |
0.363 |
$2,622 |
$2,200 |
$6 |
|
1/4 |
SM5 2516 M1-B |
64 |
1 |
58 |
0.363 |
$2,699 |
$2,276 |
$6 |
|
1/2 |
SM5 504 M1-B |
16 |
1 |
58 |
0.363 |
$2,594 |
$2,171 |
$6 |
|
1/2 |
SM5 508 M1-B |
32 |
1 |
58 |
0.363 |
$2,765 |
$2,343 |
$6 |
|
1/2 |
SM10 5016 M1-B |
64 |
1 |
113 |
0.726 |
$3,225 |
$2,592 |
$10 |
|
1 |
SM10 1004 M1-B |
16 |
1 |
113 |
0.726 |
$3,139 |
$2,505 |
$10 |
|
1 |
SM10 1008 M1-B |
32 |
1 |
113 |
0.726 |
$3,474 |
$2,841 |
$10 |
|
1 1/2 |
SM16 1608 M1-B |
32 |
1 |
243 |
1.209 |
$4,535 |
$3,901 |
$10 |
|
2 |
SM10 2002 M1-B |
8 |
2 |
125 |
0.726 |
$4,032 |
$2,765 |
$19 |
|
2 |
SM10 2004 M1-B |
16 |
2 |
125 |
0.726 |
$4,296 |
$3,029 |
$19 |
|
2 |
SM20 2008 M1-B |
32 |
1 |
243 |
1.209 |
$5,080 |
$4,095 |
$15 |
|
2 1/2 |
SM25 2506 M1-B |
24 |
1 |
243 |
1.209 |
$5,238 |
$4,253 |
$15 |
|
5 |
SM25 5003 M1-B |
12.5 |
2 |
243 |
1.209 |
$6,116 |
$4,145 |
$30 |
|
(*)
Approximate weight without chain
(**) Price given per foot of additional lifting height |
|
|
CONFIGURATION
B OPTIONS
|
|
Description |
Part No. |
SM 1 |
SM 5 |
SM 10 |
SM 16-20-25 |
|
Self locking hooks (top and bottom) |
|
N/A |
$204.69 |
$224.18 |
N/A |
|
N/A |
2217015 |
2247015 |
N/A |
|
Fixed body hook |
|
No Charge |
No Charge |
No Charge |
No Charge |
|
Standard |
2219996 |
2249953 |
Standard |
|
Steel control enclosure |
|
$250 |
No Charge |
No Charge |
N/A |
|
|
Standard |
Standard |
N/A |
|
Vinyl rain cover |
|
$114 |
$131 |
$167 |
$167 |
|
2309752003
|
2309752005
|
2309752001
|
2309752007
|
|
Slack fall stop |
|
$21 |
$24 |
$82 |
POA |
|
2218025 |
2211050 |
2249942 |
POA |
|
Second brake |
– |
N/A |
$354 |
$494 |
N/A |
|
Drain hole in the load sprocket compartment |
– |
N/A |
No Charge |
No Charge |
N/A |
|
Gear limit switch |
– |
$78 |
$146 |
$475 |
$1,325 |
|
18" power pigtail - no plug |
2309785001 |
$37 |
$37 |
$37 |
$37 |
|
18" power pigtail - no plug |
2309786001 |
$37 |
$37 |
$37 |
$37 |
|
18" power and control pigtail - no plug |
2309788001 |
$37 |
$37 |
$37 |
$37 |
|
18" power pigtail with Twist-lock male plug (L16-20P) |
2309791001 |
$97 |
$97 |
$97 |
$97 |
18" power and control pigtail with 7 pin male plug
(SXO7LM) |
2309826001 |
$151 |
$151 |
$151 |
$151 |
18" control pigtail with Twist-lock female receptacle
(L14-20R |
230979001 |
$113 |
$113 |
$113 |
$113 |
18" power and control pigtail with 14 pin male plug
(SCPB06SLX20-27PX) |
2309867001 |
$151 |
$151 |
$151 |
$151 |
|
Micro-switch electrical limits** |
– |
No Charge |
No Charge |
No Charge |
Standard |
|
208V/3Ph/60Hz power supply |
– |
No Charge |
No Charge |
No Charge |
No Charge |
|
460V-3Ph-60Hz power supply |
– |
No Charge |
No Charge |
No Charge |
No Charge |
|
| **For
hoist only mounted in the normal position. |
|
 |
|
|
|
|
| group
controllers for configurations B |
Single
hoist pistol-grip pushbutton
controller (pickle) for configuration
B or S |
|
|
|
|
•
Power and control
• 208/230V-3Ph-60Hz
• Front panel input phase indicators
• Fully magnetic circuit breaker protection
• Hand held remote with 50 ft cable |
 |
|
Features
• Pigtail without plug (standard pigtail length
is 18")
• Pendant station is light in weight for easy
handling and operation
• Two push buttons for up and down
directions
• Contacts for motion buttons are
mechanically interlocked and momentary
type |
|
•
Individual “Bump” buttons on remote
• Motor direction CED’s on remote
• Automatic shutdown if remote disconnects
• Hoist selection via remote
• Go button as a deadman |
|
|
|
|
|
|
Optional
features
• Longer pigtail cable lengths (in 1
ft increments up to 50 ft)
• Twist-lock male plug |
|
|
|
PRICING
FOR CONFIGURATION B CONTROLLERS
|
|
Description |
Number of
Channels |
Connection |
Enclosure |
Part No. |
Price |
MC403 TL* Twist-lock Controller
208 / 230V-3Ph-60Hz (with Remote) |
4 |
NEMA Type
L16-201 L14-20 |
Flight case |
2406912003 |
$3,755 |
MC403 * CEEP 7 Controller
208 / 230V-3Ph-60Hz (with Remote) |
4 |
Pin
& Sleeve
CEEP 7 |
Flight case |
2406912004 |
$3,755 |
MC803 TL* Twist-lock Controller
208 / 230V-3Ph-60Hz (with Remote) |
8 |
NEMA Type
L16-201 L14-20 |
Flight case |
2406912006 |
$5,987 |
MC803 * CEEP 7 Controller
208 / 230V-3Ph-60Hz (with Remote) |
8 |
Pin
& Sleeve
CEEP 7 |
Flight case |
2406912005 |
$5,907 |
MC1203 TL * Twist-lock Controller
208 / 230V-3Ph-60Hz (with Remote) |
12 |
NEMA Type
L16-201 L14-20 |
Flight case |
2406912009 |
$8,759 |
MC1203 * CEEP 7 Controller
208 / 230V-3Ph-60Hz (with Remote) |
12 |
Pin
& Sleeve
CEEP 7 |
Flight case |
2406912010 |
$8,759 |
|
| *Manufacturer's
warranty |
|
|
CONFIGURATION
B ACCESSORIES
|
|
Description |
Cable |
Length Ft. |
Part No.‡ |
Price |
Price per
Additional
5 ft.** |
|
Power/Control cable with 7 pin Connectors (SX07) |
16AWG / 7C |
25-125 |
2309789GRP |
$285 |
$17 |
|
Power cable with Twist-lock Connectors (L16-20) |
12AWG / 4C |
25-125 |
2309798GRP |
$270 |
$17 |
|
Control cable with Twist-lock Connectors (L14-20) |
16AWG / 7C |
25-125 |
2309799GRP |
$270 |
$17 |
|
Pistol-grip pushbutton controller (Pickle) no plug |
16AWG / 7C |
1.5 |
2309772001 |
$119 |
$17 |
|
Pistol-grip pushbutton controller (Pickle) with Twist-lock
plug |
16AWG / 7C |
1.5 |
2309772101 |
$159 |
$17 |
|
Twist-lock female receptacle (L14-20R) |
- |
- |
2213428014 |
$75 |
- |
|
Twist-lock male plug (L14-20P) |
- |
- |
2213428013 |
$75 |
- |
|
7 pin male plug (SX07LM) |
- |
- |
2213428015 |
$82 |
- |
|
7 pin female receptacle (SX07LF) |
- |
- |
2213428016 |
$82 |
- |
|
14 pin male plug (SCPB06SLX20-27PX) |
- |
- |
2213428033 |
$74 |
- |
|
14 pin female receptacle (SCPB06SLX20-27SX) |
- |
- |
2213428032 |
$74 |
- |
|
Matting connector for controller power input (CS83-64C) |
- |
- |
2213428030 |
$175 |
|
|
Twist-lock male plug (L16-20P) |
- |
- |
2213428017 |
$75 |
|
|
Twist-lock female receptacle (L16-20R) |
- |
- |
2213428018 |
$75 |
|
|
Single flight case § |
- |
- |
2309823001 |
$1,183 |
|
|
Twin flight case § |
- |
- |
2309823002 |
$1,415 |
|
|
**
Sold in 5 ft. increments
§ Manufacturer's warranty. For use with standard SM5 and SM10
hoist models only. |
‡
Sample part number:
2309776025 = 25 ft long cable assembly |
|
|
Stagemaker
Compact Concert Hoist, Stage, Theatrical, Electric Chain Hoist,
Inverted Hoists, Chain Hoists, R & M
Hoists, Pickle, Stage Setup, and Chain Climbers from your source
for material handling equipment. |
|
Back
to Product Category |
 |
|
