FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

SLIP RESISTANT OPEN
RISER ALGRIP
STAIR TREADS

1/8" THICK X 9 1/2" OR 11" DEEP
osha slip resistant open stair treads boca slip resistant open stair treads
9 1/2" OSHA - Shown in Gray Powder Coat Finish
11" BOCA - Shown in Gray Powder Coat Finish
welded end plate galvanized finish
Available in Galvanized Finish
Welded End Plate
MATERIALS
Algrip Slip Resistant Treads are manufactured through a patented CNC laser
deposition process in which hundreds of rugged, custom alloy slip-resistant
laser deposits are delivered to each square foot of a substrate.
slip resistant stair treads
CARBON STEEL - plate and grating products intended for pedestrian
traffic are manufactured with ASTM A-1011 steel substrates. For structural
applications, ASTM A-36 steel plate and bars are available. Carbon steel
products can be provided with a mill finish, powder coat or hot dip galvanized
after fabrication.
Technical Slip Resistant Information is Provided Below Price Table.

NEW! Optional Finishes!

Our standard finish is a powder coat gray.
Now we are pleased to offer our products with a hot-dipped galvanized finish or in a
Two Part System which is powder coat over a hot-dipped galvanized undercoat.

ORDERING NOTES:
1. The components listed here are used to complete a
    open riser system. Two tread depths are available.
    Select either a 9 1/2" or 11" tread depth.
4. Minimum galvanized tread order quantity is 10.
    For galvanized orders less than 10 add $125.00.
5. Special sizes quoted upon request.
2. Select desired tread width (36, 44, 48).
6. See price charts below tread drawings.
3. Select desired finish - Standard is gray powder coat with
    black or blue also available galvanized treads are also
    available as standard. Other colors available upon request.
    Unpainted treads are available at the same price as
    powder coat finish.


algrip stair treads

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR OPEN RISER ALGRIP SLIP RESISTANT STAIR TREADS
1/8" THICK X 9" DEEP
Tread Width Tread Depth Finish Wt. Ea. Lbs. Model No. Price Ea.
36
9.5
Powder Coat 23
$615.60
36
9.5
Galvanized 23
$637.20
36
9.5
Duplex 23
$762.48
44
9.5
Powder Coat 27
$752.40
44
9.5
Galvanized 27
$778.80
44
9.5
Duplex 27
$931.92
48
9.5
Powder Coat 29
$820.80
48
9.5
Galvanized 29
$849.60
48
9.5
Duplex 29
$1,016.64
1/8" X 11" DEEP
Tread Width Tread Depth Finish Wt. Ea. Lbs. Model No. Price Ea.
36 11 Powder Coat 26 ALGTRD-36-11-OPP
$632.88
36 11 Galvanized 26 ALGTRD-36-11-OPG
$669.60
36 11 Duplex 26 ALGTRD-36-11-OPD
$786.24
44 11 Powder Coat 31 ALGTRD-44-11-OPP
$773.52
44 11 Galvanized 31 ALGTRD-44-11-OPG
$818.40
44 11 Duplex 31 ALGTRD-44-11-OPD
$960.96
48 11 Powder Coat 34 ALGTRD-48-11-OPP
$843.84
48 11 Galvanized 34 ALGTRD-48-11-OPG
$892.80
48 11 Duplex 34 ALGTRD-48-11-OPD
$1,048.32

DURABILITY
While selection of the appropriate substrate is important, the true life cycle of safety
flooring is traditionally determined by the durability of the slip-resistant properties
of the walking surface. This is where your investment in Algrip begins to pay dividends.
algrip slip resistant stair treads
The traction providing laser depositions of Algrip Flooring Products have been tested
for hardness and adherence by independent testing laboratories. The results of these
tests assure that Algrip will provide unsurpassed service life.
Laboratory analysis has measured the hardness of Algrip traction providing custom
alloy laser depositions at up to 60 on the Rockwell C Scale. Under repetitious pe-
destrian and vehicular traffic, these deposits will provide continuous, safe, effective
service.
The cross-sectional photograph above illustrates the deep penetration of the symmetrical laser deposition into a steel
substrate. Laboratory tested, the deposition penetrates the substrate and is enclosed by a strengthened heat affected
zone. The resulting bond strength, combined with the proven disposition hardness provides unsurpassed durability
regardless of wear or abrasion.
SAFETY
The United States Bureau of Labor Statistics reports that over 20% of all compensable industrial injuries result from
slips and falls. Often these accidents occur when liquids, lubricants or foreign materials have accumulated on floors,
stairs or work platforms.
treads
For these challenging applications, the
unique matrix application of Algrip laser
deposits provides unparalleled slip resis-
tance in all directions. Plate products are
manufactured with more than 1,000
deposits per square foot. Shoe and tire
materials completely encircle and "grab"
the deposits. Worker safety and employer
protections are significantly enhanced with
each installation of Algrip.
SLIP RESISTANCE AND COEFFICIENT OF FRICTION (COF)
Slip-resistance is commonly tested in laboratory setting by measuring for static coefficient of friction (CCF) in
accordance with ASTM procedure C-1028. This testing procedure assigns a value to the traction surface while
that surface is tested under wet and dry conditions. Because the greatest concern for slip resistance relates to
work/pedestrian safety, this procedure can be further refined to test each condition using samples of two popular
shoe sole materials, rubber and neolite (composition). The results of these tests are expressed in numerical values
with higher values indicating increased slip-resistance.
FEDERAL GUIDELINES FOR COF
The Occupational Safety and Health Administration (OSHA) recommends that walking surfaces maintain a minimum
COF of 0.50. The Americans with Disabilities Act (ADA) recommends that level walking surfaces maintain a more
stringent 0.80 COF.
The following results demonstrate that Algrip Plate and Grating products exceed
published Federal Guidelines in all conditions!
STATIC COF
open riser plate treads
Slip Resistant Open Riser Algrip Stair Treads, Open Riser Algrip Steel Stair Treads, Anti-Slip Treads, Exterior Stair Treads,
Galvanized Stair Treads, Indoor Stair Treads, Metal Replacement Stair Treads, Outdoor Stair Treads, and Out Door Stair Treads
from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart