FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679
Home Order Search Quote Info About Us My Account Shopping Cart
Back to Product Category

SERIES 477

HELICAL/WORM GEAR POWER WINCHES
Machine Cut Gears for accurate
    and long lasting service. 		series 477 helical worm gear power winches Ball Bearings ensure smooth and
   efficient operation.
Enclosed Oil Bath provides
   continuous lubrication of gears to
   minimize wear. Oil seals keep oil
    in and dirt out. 		Series 4777 is designed with a
    4 inch wide drum for tight fleet
    angle installations.
Accessory Options include
    limit switches, cable pressure
    plates, torque limiting controls,
    and manual overrides.
Internal Mechanical Brake for
  positive load control.
Cast Aluminum construction for
    lightweight strength, with durable
    paint finish to resist corrosion.
Wire Rope sold separately.
   (See bottom of page)
Model 4771
series 477 helical worm gear power winches
series 477 helical worm gear power winches
series 477 helical worm gear power winches
Model 4771DC
Model 4771HY
Model 4771PN
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
PRICING, CONFIGURATIONS AND PERFORMANCE CHARACTERISTICS FOR SERIES 477
All 115 VAC models include 8 ft power cord with grounded plug. Please specify voltage and
phase when ordering. Please order wire rope separately.
Model
number		 Motor
description		 Motor
hp		 Amps
full
load		 Load rating (lb) Wire
rope
dia.
(in)		 Line speed
(fpm)		 Drum capacity (ft)¹ Approx.
ship
wt.
(lb)		 Price
1st
layer		 Mid
drum		 Full
drum		 1st
layer		 Full
drum		 1st
layer		 Mid
drum		 Full
drum
4771 115/1/60 VAC - 6 ft pendant 1.2 16 2000 1500 1200 5/16 13 22 13 40 90 88 $2,086
4771AC-1PH¹ 115/1/60 VAC - less controls 1.2 16 2000 1500 1200 5/16 13 22 13 40 90 87 $2,005
4771AC-1PH2¹ 115/230/1/60 VAC - less controls 1.5 16/8 2000 1500 1200 5/16 13 22 13 40 90 115 $2,161
4771AC-3PH¹ 230/460/3/60 VAC - less controls 1.5 5/2.5 2000 1500 1200 5/16 13 22 13 40 90 111 $2,134
4771DC 12 VDC - with 10 ft pendant 1.0 100 2000 1500 1200 5/16 13 22 13 40 90 105 $2,806
4771PN pneumatic - less controls 1.2   2000 1500 1200 5/16 13 22 13 40 90 74 $2,225
4771HY hydraulic - less controls 2.3   2000 1500 1200 5/16 13 22 13 40 90 72 $2,510
4777 115/1/60 VAC - 6 ft pendant 1.2 16 2000 1500 1200 5/16 13 22 7 27 60 93 $2,349
4777DC 12 VDC - with 10 ft pendant 1.0 100 2000 1500 1200 5/16 13 22 7 27 60 105 $3,214
¹ Order controls separately, see Electric Drum Control Switches below.
Model Description Approx.
ship wt.		 Price
477PN-CNTRL Pneumatic control valve (not mounted or plumbed, no hoses) 6 lb $505
477PN-HS6 6 ft hoses for pneumatic controls (not plumbed) 4 lb $124
477HY-CNTRL Hydraulic control valve (not mounted or plumbed, no hoses) 5 lb $448
477HY-HS6 6 ft hoses for hydraulic controls (not plumbed) 4 lb $110
ELECTRIC DRUM CONTROL SWITCHES
Drum control switches for 115 volt single phase motors up to 1.5 hp, include 8 ft power cord with grounded plug.
Please specify voltage, phase, and motor hp when ordering.
Model No. Description Voltage/Phase/Hertz with maximum rated motor hp Approx.
ship wt.		 Price
115/1/60 230/1/60 230/3/60 460/3/60
10L2A1 NEMA 1 to 1.5 hp to 2 hp to 3 hp to 3 hp 3 lb $414
10L7E1 NEMA 1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp 3 lb $581
10L2A4 NEMA 4 – watertight to 1.5 hp to 2 hp to 3 hp to 3 hp 7 lb $643
10L7E4 NEMA 4 – watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp 7 lb $1,061
10P1A46 6 ft pendant control to 1 hp — — — 5 lb $344
DIMENSIONS
series 477 helical worm gear power winches
SERIES 477 - WINCH DIMENSIONS (in)
Model number A B C H K L P Q S (hole dia.)
4771 14.38 8.86 3.55 17.45 6.75 6.31 5.70 2.16 0.34
4771AC-1PH 14.38 8.86 3.55 22.00 6.75 6.31 5.70 2.16 0.34
4771AC-1PH2 14.38 8.86 3.55 21.00 6.75 6.31 5.70 2.16 0.34
4771AC-3PH 14.38 8.86 3.55 19.00 6.75 6.31 5.70 2.16 0.34
4771DC 14.38 8.86 3.55 18.69 6.75 6.31 5.70 2.16 0.34
4771PN 14.38 8.86 3.55 14.94 6.75 6.31 5.70 2.16 0.34
4771HY 14.38 8.86 3.55 11.84 6.75 6.31 5.70 2.16 0.34
4777 14.38 8.86 3.49 17.45 6.75 6.31 5.70 2.16 0.34
4777DC 14.38 8.86 3.49 18.69 6.75 6.31 5.70 2.16 0.34
Dimensions are for reference only and subject to change without notice.
DRUM DIMENSIONS
Important: It is the owner's or
operator's responsibility to determine
the suitability of the equipment to its
intended use. Study all applicable
codes, manuals, and regulations. Be
sure to read the Owner's Manual
supplied with the equipment before
operating it.		 series 477 helical worm gear power winches
SERIES 477 - DRUM DIMENSIONS
model extension drum diameter flange diameter drum width fleet angle distance¹
4771 3.00 in 6.00 in 6.00 in 10 ft
4771AC-1PH 3.00 in 6.00 in 6.00 in 10 ft
4771AC-1PH2 3.00 in 6.00 in 6.00 in 10 ft
4771AC-3PH 3.00 in 6.00 in 6.00 in 10 ft
4771DC 3.00 in 6.00 in 6.00 in 10 ft
4771PN 3.00 in 6.00 in 6.00 in 10 ft
4771HY 3.00 in 6.00 in 6.00 in 10 ft
4777 3.00 in 6.00 in 4.00 in 7 ft
4777DC 3.00 in 6.00 in 4.00 in 7 ft
Dimensions are for reference only and subject to change without notice.
¹ Recommended minimum distance between drum and lead sheave for smooth drum.

ELECTRIC MOTOR CONTROLS
electric motor controls for power winches
Single Speed Reversing Magnetic Controls for
1 and 3 phase motors up to 40 hp
UL, IEC, or CSA Recognized components throughout.
Steel Enclosure NEMA 4 rated (watertight) keeps dirt and water out.
  Approved for most outdoor applications.
Pendant Control Switch NEMA 4X rated (watertight), on 50 foot
   cord, allows operator to stand away from winch during operation.
   Pendant control is operated with momentary contact-type push buttons.
  Cord lengths of less than 50 feet are available, please specify when
  ordering.
Reversing Contactor is electrically and mechanically interlocked to
   deliver smooth reversing control.
When ordering please include the following:
voltage and phase required, motor horsepower,
pendant control cord length - up to 50 ft., and
pendant control labeling - For/Rev or Up/Down.
Thermal Overload Relay trips power OFF to protect motor from
   overheating. Switch is manually reset.
Fused Control Circuit powers pendant with 115 volt, 2 amp current
   to help protect against high voltage shocks.
OPTIONS
Special current or horsepower ratings, special
rated enclosures for explosive or harsh
environments, soft start or soft stop controls,
variable speed or multispeed controls, torque
limiting controls, selector switches, power cord
disconnects, and various panel mounted controls
or pilot lights.		 Wiring Diagram is supplied inside enclosure.
Steel Mounting Bracket secures control box to winch.
Variable Frequency Drives
Variable frequency drive controls are available to provide accurate
   positioning of loads, soft starts and soft stops, and overload protection.
For 3 phase 230 VAC and 460 VAC motors from 1 to 5 hp.
For 3 phase 230 VAC motors from 1 to 30 hp.
For 3 phase 460 VAC motors from 1 to 60 hp.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
PRICING FOR SERIES EL - ELECTRIC MOTOR CONTROLS
Starters listed include NEMA 4 rated pendant control on 50 foot cord.
Please specify voltage, phase, and motor hp when ordering. Contact us for required voltages and options.
Model
Number		 Maximum rated motor horsepower for power supply current Approx.
ship wt.		 Price
115/1/60 230/1/60 208/3/60 230/3/60 460/3/60
10S2A4 to 1.5 hp - - - - 25 lb $1,414
10S3B4 - to 3 hp - - - 25 lb $1,430
10S3C4 - - to 3 hp - - 25 lb $1,166
10S7C4 - - to 7.5 hp - - 25 lb $1,061
10S10C4 - - to 10 hp - - 28 lb $1,564
10S20C4 - - to 20 hp - - 28 lb $1,811
10S3D4 - - - to 3 hp - 25 lb $1,150
10S7D4 - - - to 7.5 hp - 25 lb $1,317
10S10D4 - - - to 10 hp - 28 lb $1,553
10S20D4 - - - to 20 hp - 28 lb $2,166
10S30D4 - - - to 30 hp - 60 lb $3,053
10S7E4 - - - - to 7.5 hp 25 lb $1,097
10S15E4 - - - - to 15 hp 25 lb $1,484
10S20E4 - - - - to 20 hp 28 lb $1,430
10S40E4 - - - - to 40 hp 60 lb $2,645
10S60E4 - - - - to 60 hp 60 lb $5,149

WIRE ROPE
wire rope How to Order Wire Rope
The breaking strength of new wire rope should be
5 times the size of the largest load for lifting
applications, and 3 times the size of the largest load
for pulling applications. Contact a reputable wire
rope supplier for more information.
wire rope
Breaking Strength of New Wire Rope (lb)
wire rope diameter   7x19 Galvanized Aircraft Cable 304 Stainless Steel wire rope
1/8 in -0.13 2,000 1,760
3/16 in -0.19 4,200 3,700
1/4 in -0.25 7,000 6,400
5/16 in -0.31 9,800 9,000
3/8 in -0.38 14,400 12,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.
Breaking Strength of New Wire Rope (lb)
wire rope diameter   6 x 37 IWRC IPS
(Improved Plow Steel) wire rope		 6 x 37 IWRC EIPS
(Extra Improved Plow Steel) wire rope
3/8 in -0.38 12,400 15,100
7/16 in -0.44 16,500 20,400
1/2 in -0.50 23,000 26,600
9/16 in -0.56 29,000 33,600
5/8 in -0.63 35,800 41,200
3/4 in -0.75 51,200 58,800
7/8 in -0.88 69,200 79,600
1 in -1.00 89,800 103,400
1-1/8 in -1.13 113,000 130,000
1-1/4 in -1.25 138,800 159,800
1-1/2 in -1.50 197,800 228,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
PRICING FOR WIRE ROPE
model number wire rope diameter and length approx.
ship weight		 price
   galvanized aircraft with swivel hook and swagged ball fitting
WA19-20NS 3/16 in x 20 ft 3 lb $82
WA19-28NS 3/16 in x 28 ft 4 lb $90
WA19-36NS 3/16 in x 36 ft 4 lb $94
WA19-45NS 3/16 in x 45 ft 7 lb $111
WA25-20NS 1/4 in x 20 ft 4 lb $92
WA25-28NS 1/4 in x 28 ft 5 lb $97
WA25-36NS 1/4 in x 36 ft 6 lb $104
WA25-45NS 1/4 in x 45 ft 7 lb $125
WA25-60NS 1/4 in x 60 ft 9 lb $134
WA25-75NS 1/4 in x 75 ft 11 lb $162
   galvanized aircraft cable with swivel hook and unfinished end
WA31-20DS 5/16 in x 20 ft 6 lb $120
WA31-28DS 5/16 in x 28 ft 7 lb $132
WA31-36DS 5/16 in x 36 ft 8 lb $142
WA31-45DS 5/16 in x 45 ft 10 lb $157
WA31-60DS 5/16 in x 60 ft 12 lb $166
WA31-75DS 5/16 in x 75 ft 15 lb $176
galvanized aircraft cable with swivelhook and unfinished end
WA38-28DS 3/8 in x 28 ft. 8 lb $316
WA38-36DS 3/8 in x 36 ft 10 lb $344
WA38-45DS 3/8 in x 45 ft 11 lb $379
WA38-60DS 3/8 in x 60 ft 14 lb $430
WA38-75DS 3/8 in x 75 ft 17 lb $488
   304 stainless steel wire rope with SS oval hook and swagged ball fitting 
WS19-20NO 3/16 in x 20 ft 3 lb $152
WS19-28NO 3/16 in x 28 ft 3 lb $160
WS19-36NO 3/16 in x 36 ft 4 lb $170
WS19-45NO 3/16 in x 45 ft 7 lb $185
WS19-60NO 3/16 in x 60 ft 9 lb $204
WS19-75NO 3/16 in x 75 ft 11 lb $235
    304 stainless steel wire rope with SS eye hook and swagged ball fitting
WS25-20NE 1/4 in x 20 ft 5 lb $206
WS25-28NE 1/4 in x 28 ft 5 lb $218
WS25-36NE 1/4 in x 36 ft 6 lb $230
WS25-45NE 1/4 in x 45 ft 7 lb $269
WS25-60NE 1/4 in x 60 ft 9 lb $320
WS25-75NE 1/4 in x 75 ft 11 lb $356
   304 stainless steel wire rope with SS eye hook and unfinished end 
WS31-20DE 5/16 in x 20 ft 6 lb $283
WS31-28DE 5/16 in x 28 ft 7 lb $299
WS31-36DE 5/16 in x 36 ft 9 lb $314
WS31-45DE 5/16 in x 45 ft 11 lb $334
WS31-60DE 5/16 in x 60 ft 14 lb $370
WS31-75DE 5/16 in x 75 ft 17 lb $406
   304 stainless steel wire rope with SS eye hook and unfinished end 
WS38-28DS 3/8 in x 28 ft. 8 lb $339
WS38-36DS 3/8 in x 36 ft 10 lb $368
WS38-45DS 3/8 in x 45 ft 11 lb $396
WS38-60DS 3/8 in x 60 ft 14 lb $454
WS38-75DS 3/8 in x 75 ft 17 lb $505
Helical-Worm Gear Power Winches, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power
Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material
handling equipment.
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Info - About Us - My Account - Shopping Cart