FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679
Home Index Order Search Quote Info About Us Services
Back to Product Category
SENORA III CONCRETE PLANTER
MODEL TF4055
concrete reservoir planter concrete reservoir planter
PRICE: $345.00
Description: Senora III. Accepts reservoir system.
Size: 30” dia. x 24”
Unit Weight/Unit Capacity: 390 lbs.
Weight: 380 lbs.
Material: Reinforced Precast Concrete.
Wall Thickness: 2-3/4" at the top with a 2% pitch.
Reservoir System: Available.
Features: Top edge is smooth.
Reinforcing: 1/4” Dia. Steel rebar.
Hardware: (4) - 1/2” Dia. Threaded inserts.
                   (2) - 5/8” Dia. Lifting inserts.
Drain Hole: (1) - 1 1/2" Dia.
Anchoring: Optional.
Maintenance: Rinse periodically with water & mild detergent.
                        Reseal annually.
Packaging: Banded to pallet.
*NOTE:
Lifting inserts are to ONLY be used when the planter is EMPTY.
COLOR CHART
B1
B2
B3
B4
B5
B6
B7
B8
B9
C - COLOR CHART (Requires a 30% up-charge)
concrete with recycled glass concrete with recycled glass
RESERVOIR PLANTER SPECIFICATIONS
concrete reservoir planter
2.1 MATERIALS
   A. Non-woven Polypropylene wicks of synthetic fiber; resistant to fungus and mildew; indigestible to insects.
   B. (1) - 2" Dia. hot dipped galvanized steel fill pipe.
   C. (1) - porous membrane (same material as wicks).
   D. (1) - thick foam insulation, custom fitted to contours to specified planter.
   E. (1) - hot dipped galvanized pipe strap.
   F. (1) - 5/8" Dia. stainless steel bolt.
   G. (1) - Rubber plug with compression key lock.
   H. Stainless steel drain lines (cast directly into planters).
GENERAL PLANTER SPECIFICATIONS
concrete reservoir planter 1.1 SUMMARY
   A. Section includes: Furnish Precast Concrete Planter indicated
       on drawings or specified herein.
1.2 REFERENCES
   A. American Society for Testing & Materials
   1. ASTM C33      2. ASTM C150      3. ASTM C31
1.5 SUBMITTALS
   A. Submit product data, shop drawings and Samples.
       1. Product Data: Manufacturer's specifications and technical data
           edited specifically for proposed system, including the following
           specific information:
              a. Detailed specification of construction fabrication.
              b. Manufacturer's installation instructions
              c. Maintenance literature
              d. Product warranty
       2. Shop Drawings: Indicate pertinent dimensions, general
           construction, component connections anchoring methods,
           hardware and installation procedures.
       3. Samples as requested by Architect.
1.6 QUALITY ASSURANCE
   A. Qualifications of Manufacturer: Manufacturer to be prequalified
        by specifier prior to bidding. Failure to comply will result in
        disqualification of bid. Manufacturer to have at least five
        years experience in the manufacturer of precast concrete planters
        field proven for at least five years.
1.10 WARRANTY
Manufacturer shall submit a written warranty for precast products for
the period of two years upon acceptance of products.
2.2 MATERIALS
   A. Portland Cement: ASTM C150 specifications for Portland
        Cement.
   B. Aggregates: All aggregates to meet ASTM C33 specifications,
        to be cleaned of foreign matter and properly graded to size.
   C. Coloring: Pigments used shall be inorganic, resistant to alkalinity
        and used as per manufacturers recommendations.
concrete reservoir planter
concrete reservoir planter
Concrete Planters, Planters, Security Planters, Cement Planter, Commercial Concrete Planter, Concrete Security
Planters, Flower Planters, Site Furnishings, and Steel Planters from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Index - Order - Search - Quote - Info - About Us - Services