 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679 |
|
|
|
|
Back
to Product Category
|
| Clamps
(Refer also to ANSI/ASME B30.20) |
|
If
not properly installed, operated, and maintained, the use of
all mechanical equipment presents the possibility of
personal injury or property damage. Before using lifting clamps,
become familiar with applicable installation, operation
and maintenance requirements. Clamps should be used only by
authorized, properly trained operators. |
| Observing
the following general precautions will guard against damage
and injury: |
Inspect
clamps and equipment before use. Do not use if components are
bent, elongated, gouged, nicked excessively,
worn, or damaged. Make sure that nuts, bolts, pins and other
fasteners are tightened and secure. Make sure clamps are
functional and will grip the load. |
| Do
not exceed the clamps’ rated load or working load limit
of other lifting equipment components. |
| Lift
only one plate at a time when using lifting clamps. |
Do
not lift unbalanced loads. Avoid sudden jerks when applying
the load. Rapid load application can produce
overloading. |
| Use
clamps and lifting equipment only if authorized and properly
trained. |
| Always
stand clear when lifting and lowering. |
| Use
more than one clamp suspended from a lifting beam when lifting
long loads. |
| Always
gently lift and lower. |
|
|
DIMENSIONS
|
|
Model |
Working
Load Limit |
Flange |
A |
B |
C |
D |
E |
F |
Weight |
|
Imperial |
|
|
lb. |
in. |
in. |
in. |
in. |
in. |
in. |
in. |
lb. |
|
SC921 |
2,200 |
3 to 8-1/4 |
12.625 |
12.125 |
1.750 |
8.250 |
5.375 |
2.625 |
11.0 |
|
SC922 |
4,400 |
3 to 8-1/4 |
12.625 |
12.875 |
1.750 |
8.250 |
5.375 |
2.875 |
13.5 |
|
SC923 |
6,600 |
4 to 10-5/8 |
16.125 |
14.750 |
1.750 |
10.625 |
6.500 |
4.000 |
17.5 |
|
SC923/L |
6,600 |
3 to 12 |
17.375 |
16.500 |
1.750 |
12.000 |
8.625 |
4.000 |
20.0 |
|
SC925 |
11,000 |
4 to 10-5/8 |
16.125 |
15.375 |
2.125 |
10.625 |
8.500 |
4.375 |
22.0 |
|
SC925/L |
11,000 |
3 to 12 |
17.125 |
17.125 |
2.125 |
12.000 |
8.625 |
4.375 |
26.5 |
|
SC9210 |
22,000 |
3 to 12 |
18.125 |
20.000 |
2.125 |
12.000 |
8.625 |
4.375 |
35.5 |
|
|
|
|
PRICING
FOR SCREWLOK CLAMPS WITH SHACKLE SUSPENSION
|
New
Product Code |
Old
Product Code |
*Working Load
Limit (lbs.) |
*Working
load limit (lbs.) |
Flange
(in.) |
Shackle I.D.
(in.) |
Weight
(lbs.) |
Price
(ea.) |
|
@ 15° |
@ 30° |
@ 45° |
|
SC921 |
695249 |
2,200 |
2,125 |
1,905 |
1,555 |
3 - 8 1/4 |
1 3/4 |
11 |
$182 |
|
SC922 |
695250 |
4,400 |
4,250 |
3,810 |
3,111 |
3 - 8 1/4 |
1 3/4 |
13.5 |
$205 |
|
SC923 |
695251 |
6,600 |
6,375 |
5,716 |
4,667 |
4-10 5/8 |
1 3/4 |
17.5 |
$325 |
|
SC923/L |
694991 |
6,600 |
6,375 |
5,716 |
4,667 |
3-12 |
1 3/4 |
20 |
$408 |
|
SC925 |
694992 |
11,000 |
10,625 |
9,526 |
7,778 |
4 - 10 5/8 |
2 1/8 |
22 |
$428 |
|
SC925/L |
694993 |
11,000 |
10,625 |
9,526 |
7,778 |
3-12 |
2 1/8 |
26.5 |
$535 |
|
SC9210 |
694994 |
22,000 |
21,250 |
19,052 |
15,556 |
3-12 |
3 1/4 |
35.5 |
$635 |
|
|
| TWIN
SCREWLOK CLAMPS TYPE SC92T |
Back
to Previous |
|
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
The
Twin Screwlok Clamps are designed
to enable one beam to be suspended
beneath another beam. Note these clamps
can only be used with a minimum of 2
suspension points. Cantilevered loads on
the bottom beam are not allowable. The
diagram shows the rigid fixed suspension
bracket. These are also available with a
single bolt swivel suspension bracket. |
|
|
|
|
|
PRICING
AND DIMENSIONS FOR SC92T TWIN SCREWLOK CLAMP
|
New
Product Code |
Old
Product Code |
*Working Load
Limit (lbs.) |
Flange
(in.) |
Dimensions
(inches) |
Weight
(lbs.) |
Price
(ea.) |
|
A Max. |
B Max. |
C |
D Max. |
E Max. |
F |
|
SC922T |
694971 |
4,400 |
3-8 1/4 |
14 5/8 |
18 1/2 |
2 |
8 1/4 |
4 3/4 |
2 7/8 |
28.5 |
$615 |
|
SC923T |
694972 |
6,600 |
4-10 5/8 |
18 1/8 |
22 1/2 |
2 1/2 |
10 5/8 |
5 1/2 |
4 |
35.5 |
$838 |
|
SC923/LT |
694973 |
6,600 |
3-12 |
18 7/8 |
26 |
2 1/2 |
12 |
5 3/4 |
4 |
44 |
$1,173 |
|
SC925/T |
694974 |
11,000 |
4-10 5/8 |
18 1/8 |
22 1/2 |
2 1/2 |
10 5/8 |
5 1/2 |
4 3/8 |
51 |
$1,398 |
|
SC925/LT |
694975 |
11,000 |
3-12 |
18 7/8 |
26 |
2 1/2 |
12 |
5 3/4 |
4 3/8 |
59.5 |
$1,596 |
|
|
| PUSH
TRAVEL SCREWLOK TROLLEY TYPE CTP |
Back
to Previous |
|
|
|
 |
|
 |
|
|
|
|
The
push travel Screwlok trolley clamp
provides an easily moved temporary
suspension point. |
|
|
|
|
|
|
|
|
|
PRICING
FOR CTP PUSH TRAVEL SCREWLOK TROLLEY
|
New
Product Code |
Old
Product Code |
*Working Load
Limit (lbs.) |
Flange
(in.) |
Dimensions
(inches) |
Weight
(lbs.) |
Price
(ea.) |
|
A Max. |
B Max. |
C |
D |
E Max. |
F |
|
CTP1 |
694986 |
2,200 |
3-8 1/4 |
10 5/8 |
10 5/8 |
3/4 |
1 3/8 |
9 1/2 |
6 |
13.5 |
$773 |
|
CTP2 |
694987 |
4,400 |
3-8 1/4 |
12 3/8 |
8 1/2 |
3/4 |
2 3/8 |
11 1/4 |
8 |
22 |
$871 |
|
CTP3 |
694988 |
6,600 |
3 1/2 - 8 1/4 |
12 3/8 |
8 1/2 |
7/8 |
2 3/4 |
11 5/8 |
8 7/8 |
33 |
$1,211 |
|
|
| SNAP
ON TROLLEYS TYPE TBT |
Back
to Previous |
|
|
|
|
|
|
|
|
 |
 |
|
|
|
|
|
|
|
A
range of snap on push travel trolleys. Once
the load is in position the trolley is locked in
position, in addition a spring loaded safety pin
is included for extra safety. |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICING
AND DIMENSIONS FOR TBT SNAP-ON TROLLEY
|
New
Product Code |
Old
Product Code |
*Working Load
Limit (lbs.) |
Jaw
Opening (in.) |
Dimensions
(inches) |
Weight
(lbs.) |
Price
(ea.) |
|
A |
B |
C |
D |
E |
F |
|
TBT10 |
694996 |
660 |
2 3/8-3 1/8 |
7 7/8 |
10 7/8 |
1 1/2 |
4 1/8 |
3/4 |
7 7/8 |
15.5 |
$1,143 |
|
TBT20 |
694997 |
2,200 |
3-4 |
10 1/4 |
9 |
1 1/8 |
3 |
3/4 |
7 7/8 |
17.5 |
$1,390 |
|
TBT40 |
694998 |
4,400 |
4-5 7/8 |
13 3/8 |
12 5/8 |
1 1/2 |
3 5/8 |
3/4 |
7 7/8 |
35.5 |
$1,596 |
|
TBT60 |
694999 |
6,600 |
4-7 7/8 |
16 1/2 |
15 3/4 |
1 7/8 |
4 |
3/4 |
7 7/8 |
57.5 |
$1,830 |
|
|
Adjustable
Beam Clamps, Beam Clamp, Beam Clamps, I Beam Clamp, Lifting
Clamp, Locking Clamp, Locking
Clamps, Plate Clamp, Plate Clamps, Plate Lifting Clamps, Screw
Clamp, and Screw Clamps from your source
for material handling equipment. |
Back
to Product Category |
 |
|
Designed to fit flanges of most structural beams 