 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679 |
|
|
|
|
Back
to Product Category
 |
MODEL
TR
|
|
HORIZONTAL
BELT CONVEYOR
(TROUGHED BED)
|
 |
|
|
|
The
Model TR, with built-in guard
rails, is ideal for overhead conveying
applications. It easily conveys boxes,
cartons, cases, bags, etc., as well as
loose parts. |
|
|
|
10 Belt Widths
Reversible (with center drive)
Troughed Bed
Adjustable MS-Type Floor
Supports Available |
|
|
| Stock:
Items coded in green ship in 24 hrs. |
|
|
|
|
|
|
|
|
|
|
|
 |
|
8"
END DRIVE
|
|
SECTION
"X-X"
|
|
|
|
|
|
STANDARD
SPECIFICATIONS
|
BED
– 4 in. deep x 12 ga. formed steel slider bed with
2-1/2 in. deep guards, powder painted. Standard 5 ft. &
10 ft. long sections bolt together with splice plates.
END DRIVE – Located on discharge end of conveyor,
chain guard on left hand side.
DRIVE PULLEY – 4 in. dia. with 1 in. dia. shaft
at
bearings or 8 in. dia. with 1-3/16 in. dia. shaft at bearings,
machine crowned and fully lagged. See chart.
TAIL PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings, machine crowned.
SNUB IDLER – Adjustable 2-1/8 in. dia. pre-lubricated
ball bearings. Guards included.
RETURN IDLER – Adjustable 1.9 in. dia. pre-lubri-
cated ball bearings. |
|
BELT
– Ultimate 140 BBS–Nitrile.
TAKE-UP – Take-ups at tail pulley. Provides 4 in.
of belt take-up.
BEARINGS – Sealed, pre-lubricated ball bearings,
self-aligning, ball bearings on drive and tail pulleys.
SPEED REDUCTION – Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley.
MOTOR – 1/2 HP–208/230/460/575V–3 Ph.–60
Hz.
Totally Enclosed C-Face.
BELT SPEED – Constant 65 FPM.
CAPACITY – Maximum load per linear foot of con-
veyor 75 lbs. NOT TO EXCEED capacity in charts.
FLOOR SUPPORTS – Now supplied as optional
equipment. |
|
|
LOAD CAPACITY CHART @ 65 FPM W/STANDARD BELT
|
|
HP |
BELT WIDTHS TO |
LENGTHS UP TO
|
|
4" Dia. Drive Pulley
|
8" Dia.
Drive Pulley
|
|
11' |
21' |
31' |
41' |
51' |
77' |
102' |
|
DISTRIBUTED LOAD (LBS.)
|
|
1/2 |
16" |
335 |
320 |
310 |
300 |
285 |
260 |
230 |
|
24" |
320 |
300 |
285 |
270 |
255 |
210 |
170 |
|
30" |
300 |
275 |
255 |
235 |
215 |
165 |
115 |
|
1 |
16" |
650 |
635 |
625 |
615 |
605 |
625 |
595 |
|
24" |
635 |
620 |
600 |
585 |
570 |
580 |
540 |
|
30" |
620 |
595 |
575 |
550 |
530 |
535 |
480 |
|
|
|
LOAD CAPACITY CHART 25° INCLINED @ 65 FPM
W/ROUGH TOP BELT
|
|
HP
|
BELT WIDTHS
TO
|
LENGTHS UP TO
|
|
11'
|
21'
|
31'
|
41'
|
51'
|
|
DISTRIBUTED LOAD (LBS.)
|
|
1/2 |
16" |
155 |
145 |
135 |
125 |
110 |
|
24" |
145 |
130 |
115 |
100 |
80 |
|
30" |
135 |
115 |
95 |
75 |
55 |
|
1 |
16" |
310 |
300 |
290 |
280 |
270 |
|
24" |
305 |
285 |
270 |
255 |
240 |
|
30" |
290 |
270 |
250 |
230 |
210 |
|
|
|
|
|
OPTIONAL
EQUIPMENT
|
FLOOR
SUPPORTS – MS Type floor supports are
available with a wide range of adjustment. Specify top of
belt or roller elevation. One support required at every bed
joint and ends of conveyor. Holes in feet for lagging to
floor. Knee braces recommended above MS-6 support.
BELT* – White Polymate 100 RMP-COS (cover one
side), Black Trackmate 120 Roughtop with PVC cover,
Brown Polymate Roughtop w/Nitrile cover, Black
Trackmate 533 COS-PVC, Tan Glidetop, Brown Nitrile
Roughtop.
BELT SPEED*– Other constant and variable speeds.
V-belt drive supplied under 17 FPM.
HIGHER SIDES – 4 in., 6 in., 9 in., and 12 in. high
vertical sides (12 in. Maximum).
OVERHEAD END DRIVE – Motor reducer unit
mounted 9-1/2 in. above belt. Other clearances available,
specify. Chain guard RH side. Minimum elevation 6 in.
with 4 in. drive, 10 in. with 8 in. drive.
SIDE MOUNTED END DRIVE – Motor reducer unit
mounted to LH side of conveyor. Minimum elevation 7 in.
with 4 in. drive, 10 in. with 8 in. drive.
CENTER DRIVE – Provides 16 in. of belt take-up.
Minimum elevation 16 in. with 4 in. drive, 17 in. with 8 in.
drive. Specify location. Minimum OAL without modifi-cation-63
in. with 4 in. drive, 66 in. with 8 in. drive.
LOW ELEVATION SIDE MOUNTED CENTER
DRIVE – Motor-reducer unit mounted to side of con-
veyor. Minimum elevation 13-1/2 in. with 4 in. or 8 in.
drive.
STACKED END DRIVE – Minimum elevation 27-3/4”
with V-belt drive, 33- 3/4” with C-Face drive.
SHAFT MOUNTED END DRIVE – Contact us
V-BELT DRIVE – V-Belt supplied between motor and
reducer. Minimum overall drive width 14 in. Allow 65 in.
O-RING DRIVE CHAIN – With sealed in lubricant
(Recommended for applications that do not permit regular
lubrication). |
|
UNDERSIDE
TAKE-UP – Provides 16 in. of belt
take-up. Extends down 13-1/4 in. from top of belt.
NOSEOVER* – Adjustable, single (0 . to 15 .),
double (0 . to 30 .).
LOWER POWERED FEEDER* – Chain type
driven from tail pulley of inclined conveyor. Underside
take-up required when end drive is used. MS Type
floor supports now supplied as optional equipment.
8 in. dia. drive recommended on conveyor when feeder
exceeds 44-1/2 in.OAL.
GRAVITY BRACKETS – Adjustable bars with 1 in.
dia. pop-out transfer roller to attach wheel or 1-3/8 in.
roller conveyor. Available 11 in. to 25 in. bed widths
only.
BUTT COUPLINGS – Provides connection to SB,
RB, LR, ACC, ACZ, ABEZ, 190-NSP, 190-NSPEZ,
1.9 in. & 2.0 in. gravity conveyors. Includes 1 in. dia.
popout roller. Center drive or underside take-up recommended.
PULLEYS – 6 in. tail with 1-3/16 in. dia. shaft
at
bearings or 8 in. drive with 1-3/16 in. dia. shaft at bear-
ings.
CASTERS – See Accessory section.
POLY-TIER SUPPORTS – 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied.
CEILING HANGERS – 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and galvan-
ized rods available.
MOTORS – Energy effi cient, single phase, brake-
motor, other characteristics. 2 HP maximum.
ELECTRICAL CONTROLS – One direction manual
start switch, reverse drum switch, non-reversing and
reversible magnetic starters, push button stations. AC
variable frequency drive.
*NOTE: Capacity affected with these options. |
|
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
•
End Drive, Located on Discharge End of Conveyor,
Chain Guard on Left Hand Side When Standing at Infeed
Looking Toward Discharge
• Black Ultimate 140 BBS Belt
• 12 Ga. Slider Bed
• “C” Face Speed Reducer–Sealed Worm Gear |
|
•
1/2 HP–“C” Face Totally Enclosed Motor (Specify
Exact Voltage)
• Totally Enclosed Chain Guard
• 65 FPM Belt Speed
• Less Electrical Controls
• Less Floor Supports |
|
|
|
SIZE
TO
ORDER
Overall
Length
"A" |
Bed
Length
"L" |
Overall
Length
with
Center
Drive |
Drive
Pulley |
Black Ultimate 140 BBS Belt Widths
|
|
6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
|
Between Side Guards
|
|
7" |
9" |
11" |
13" |
15" |
17" |
19" |
21" |
25" |
31" |
|
Overall Bed Widths
|
|
8" |
10" |
12" |
14"` |
16" |
18" |
20" |
22" |
26" |
32" |
|
6’ |
5’ |
6’ |
4" Dia. |
$1741 |
$1,785 |
$1,828 |
$1,873 |
$1,916 |
$1,960 |
$2,003 |
$2,048 |
$2,135 |
$2,266 |
|
11’ |
10’ |
11’ |
$1,926 |
$1,994 |
$2,061 |
$2,128 |
$2,194 |
$2,261 |
$2,328 |
$2,395 |
$2,529 |
$2,730 |
|
16’ |
15’ |
16’ |
$2,113 |
$2,203 |
$2,293 |
$2,384 |
$2,472 |
$2,563 |
$2,653 |
$2,743 |
$2,924 |
$3,192 |
|
21’ |
20’ |
21’ |
$2,299 |
$2,413 |
$2,527 |
$2,640 |
$2,750 |
$2,864 |
$2,978 |
$3,091 |
$3,318 |
$3,655 |
|
26’ |
25’ |
26’ |
$2,486 |
$2,623 |
$2,760 |
$2,896 |
$3,028 |
$3,165 |
$3,301 |
$3,438 |
$3,711 |
$4,118 |
|
31’ |
30’ |
31’ |
$2,672 |
$2,832 |
$2,992 |
$3,152 |
$3,307 |
$3,467 |
$3,626 |
$3,787 |
$4,106 |
$4,582 |
|
36’ |
35’ |
36’ |
$2,858 |
$3,041 |
$3,225 |
$3,407 |
$3,586 |
$3,768 |
$3,951 |
$4,135 |
$4,500 |
$5,045 |
|
41’ |
40’ |
41’ |
$3,045 |
$3,251 |
$3,457 |
$3,664 |
$3,864 |
$4,070 |
$4,276 |
$4,482 |
$4,895 |
$5,507 |
|
46’ |
45’ |
46’ |
$3,231 |
$3,461 |
$3,690 |
$3,919 |
$4,142 |
$4,371 |
$4,601 |
$4,830 |
$5,289 |
$5,970 |
|
51’ |
50’ |
51’ |
$3,418 |
$3,670 |
$3,922 |
$4,175 |
$4,420 |
$4,673 |
$4,925 |
$5,178 |
$5,684 |
$6,433 |
|
56’-4” |
55’ |
56’ |
8" Dia. |
$3,957 |
$4,233 |
$4,509 |
$4,850 |
$5,118 |
$5,393 |
$5,718 |
$5,994 |
$6,545 |
$7,425 |
|
61’-4” |
60’ |
61’ |
$4,144 |
$4,443 |
$4,741 |
$5,106 |
$5,396 |
$5,694 |
$6,043 |
$6,342 |
$6,940 |
$7,888 |
|
66’-4” |
65’ |
66’ |
$4,330 |
$4,653 |
$4,974 |
$5,361 |
$5,674 |
$5,996 |
$6,368 |
$6,689 |
$7,334 |
$8,351 |
|
71’-4” |
70’ |
71’ |
$4,516 |
$4,861 |
$5,208 |
$5,618 |
$5,952 |
$6,297 |
$6,692 |
$7,037 |
$7,729 |
$8,814 |
|
76’-4” |
75’ |
76’ |
$4,703 |
$5,071 |
$5,440 |
$5,873 |
$6,230 |
$6,598 |
$7,017 |
$7,386 |
$8,123 |
$9,276 |
|
81’-4” |
80’ |
81’ |
$4,889 |
$5,281 |
$5,673 |
$6,129 |
$6,508 |
$6,900 |
$7,341 |
$7,733 |
$8,516 |
$9,740 |
|
86’-4” |
85’ |
86’ |
$5,076 |
$5,491 |
$5,905 |
$6,385 |
$6,786 |
$7,201 |
$7,666 |
$8,081 |
$8,911 |
$10,203 |
|
91’-4” |
90’ |
91’ |
$5,262 |
$5,699 |
$6,138 |
$6,641 |
$7,065 |
$7,503 |
$7,991 |
$8,429 |
$9,305 |
$10,666 |
|
96’-4” |
95’ |
96’ |
$5,447 |
$5,909 |
$6,370 |
$6,897 |
$7,343 |
$7,804 |
$8,315 |
$8,776 |
$9,699 |
$11,128 |
|
101’-4” |
100’ |
101’ |
$5,634 |
$6,119 |
$6,603 |
$7,152 |
$7,622 |
$8,106 |
$8,640 |
$9,124 |
$10,094 |
$11,592 |
|
Per Foot Price
|
$37.28 |
$41.84 |
$46.51 |
$51.19 |
$55.62 |
$60.30 |
$64.97 |
$69.53 |
$78.88 |
$92.55 |
|
| *Refer
to the bottom of the page for conveyor weights. |
|
| IMPORTANT
NOTES |
|
•
OTHER LENGTHS
Other lengths not listed in price chart are available. For “IN-BETWEEN
SIZES”, use next larger Overall Length “A”
price. For lengths longer or shorter than those shown in chart,
please contact factory.
• MAXIMUM BED WIDTH
Maximum Bed Width is 39” (40” OAW). Contact Factory
for pricing and application. Requires an 8” drive and 6”
tall.
• OTHER WIDTHS
For “IN-BETWEEN WIDTHS”, use next width plus 10%.
For widths over 32” OAW, contact US.
• NON-STANDARD WIDTHS
Contact us for lead
time.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not
included. From Stockyard, available
in 10 ft. lengths only.
• FLOOR SUPPORTS
FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE.
There are two (2) stationary floor supports required for the
first bed section and one
(1) support required per bed section thereafter. |
|
|
|
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
| OPTIONAL
BELTS |
|
CONSTANT
AND VARIABLE SPEEDS |
Extra
Price Per Foot Conveyor Length "A" (in addition
to Black Ultimate 140 BBS Belt regularly furnished).
See chart below. |
|
Constant
C-Face–Within 17-135 FPM ................
.......................................................No
Charge
Constant V-Belt–Minimum of 4 FPM ..................
................................ Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above ......
............................................... Contact us
Variable Speed .... See AC Variable Speed Drives |
|
BELT
DESCRIPTION
|
|
|
PRICES PER FOOT OF CONVEYOR LENGTH "A"
|
|
BELT WIDTH |
Tan Glidetop |
Polymate 100 RMP-COS (White) |
Trackmate 533 COS-PVC (Black) |
Polymate 120 Roughtop with PVC Cover (Black) |
Polymate
Roghtop (Brown) Nitrile-COS |
Pure
Gum Rubber Roughtop |
|
6" |
$14.74 |
$3.60 |
$0.60 |
$2.04 |
$9.95 |
$19.18 |
|
8" |
$19.30 |
$4.68 |
$0.72 |
$3.00 |
$13.19 |
$25.53 |
|
10" |
$23.98 |
$5.40 |
$0.96 |
$3.72 |
$16.43 |
$31.89 |
|
12" |
$28.65 |
$6.47 |
$1.08 |
$4.44 |
$19.66 |
$38.24 |
|
14" |
$33.21 |
$7.55 |
$1.20 |
$5.40 |
$22.90 |
$44.71 |
|
16" |
$37.77 |
$8.51 |
$1.44 |
$6.23 |
$26.25 |
$51.07 |
|
18" |
$42.31 |
$9.47 |
$1.56 |
$6.96 |
$29.49 |
$57.54 |
|
20" |
$46.99 |
$10.55 |
$1.67 |
$7.92 |
$32.72 |
$63.89 |
|
24" |
$56.22 |
$12.34 |
$2.04 |
$9.47 |
$39.32 |
$76.72 |
|
30" |
$70.01 |
$15.35 |
$2.52 |
$11.87 |
$49.15 |
$95.90 |
|
|
|
DRIVE
COMPONENT DEDUCTS |
|
|
|
|
Less
Motor Drive, Motor Mount and Guards, |
|
but
with Shaft Extension...Deduct................ |
$478.90 |
|
Less
Motor Only (1/2 HP-208/230/460/575V- |
|
3Ph.-60
Hz.)..............Deduct..................... |
$147.50 |
|
*Less
Reducer...........Deduct...................... |
$175.30 |
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
HIGHER
SIDES |
|
Sides
Higher than 2-1/2 per foot both sides:
4" High.......................................................
6" High....................................................... |
|
|
$11.27
$13.31 |
|
|
| OPTIONAL
DRIVES |
|
|
9"
High.......................................................
12' High..................................................... |
$16.30
$20.14 |
DRIVE
TYPE |
BED WIDTHS |
|
8" TO 22" |
26" TO 32" |
|
End Drive (V-Belt) |
$140.62 |
$140.62 |
|
Center (C-Face) |
$602.88 |
$723.48 |
|
Center (V-Belt) |
$743.50 |
$864.10 |
|
Side Mounted End (C-Face) |
$211.83 |
$275.12 |
|
Side Mounted End (V-Belt) |
$352.45 |
$415.74 |
|
Side Mounted Center (C-Face) |
$814.70 |
$998.60 |
|
Side Mounted Center (V-Belt) |
$955.32 |
$1,139.22 |
|
Overhead (C-Face) |
$315.40 |
$401.96 |
|
Overhead (V-Belt) |
$456.02 |
$542.58 |
|
Stacked End**(C-Face) |
$123.72 |
$146.85 |
|
Stacked End**(V-Belt) |
$264.34 |
$287.59 |
|
Stacked Center (C-Face) |
$726.59 |
$870.33 |
|
Stacked Center (V-Belt) |
$867.21 |
$1,011.07 |
|
|
|
|
|
NOTE
1: For Higher Sides with Style “A” or Style “B”
Design, add Higher Side Price to Special Side Price.
NOTE 2: Special Sides Not Available with Side
Mounted Center and Overhead Drive. |
|
|
FILLER
PLATES |
|
|
For
2-1/2" to 6" High Guards...................
per joint...................................................
For 9” to 12” High Guards
per joint ................................................. |
|
|
|
$41.12 |
|
|
|
|
|
$41.12 |
|
|
LARGER
DRIVE OR TAIL PULLEY |
|
|
|
Bed Widths
|
8" Dia. Drive
Pulley in Lieu
of 4" Dia.
|
6" Dia. Tail
Pulley in Lieu
of 4" Dia.
|
|
8" 10" 12" |
$354.00 |
$205.60 |
|
14" 16" 18" |
$418.99 |
|
20" 22" 26" |
$466.81 |
|
32" |
$528.67 |
|
Shaft
Mounted End Drive ............ Contact us
#50 O-Ring Drive Chain..........Add...........$162.28
**Minimum elevation 28-1/16” with V-belt Drive,
33-3/16” with C-face drive.. |
|
|
|
|
|
|
|
|
NOSEOVER |
|
|
Adjustable
type. Support not included in base
price. DOES NOT include bed length. |
| UNDERSIDE
TAKE-UP |
|
|
Provides
16" of Belt Take-Up on Long Units. Required
on Incline Units with Power Feeders and End Drives. |
|
|
Single.......(0°
to 15°)...................................
Double.....(0° to 30°)................................... |
$194.81 |
|
|
$275.12 |
|
BED WIDTHS |
PRICE |
|
8" to 16" |
$426.65 |
|
18" to 22" |
$522.74 |
|
26" to 32" |
$569.59 |
|
|
|
NOTE:
Brakemotor required on Incline or Decline
Units greater than 10°. |
|
|
COUPLING
HARDWARE |
|
|
*Gravity
Conveyor Bracket with Pop-Out
Roller...per end......................................... |
|
|
|
$49.63 |
| ELECTRICAL
CONTROLS |
|
|
|
Butt
Couplings with Pop-Out Roller..........
..........per end........................................... |
|
| (See
bottom of page) |
|
|
|
$46.27 |
| GALVANIZING |
|
|
Nose
Roller Assembly - 1-1/8” Dia. ............per end .......................................... |
|
Add
to Base Price ........................................ 40%
All Parts to be Galvanized Construction, except
pulleys (Hot Rolled Steel Painted), Drive Shafts,
Tail Shafts, and Idler Shafts will be Cold Rolled
Steel Construction.
Note: Not Rated for Wash Down Application
Note: Contact Factory for Wash Down Duty
Note: Contact Factory for Stainless Steel Options |
|
|
|
$315.16 |
|
NOTE:
Center drive required if nose rollers used on each end |
|
|
Tail
Pulley - 2-1/4” Dia. ............per end... |
$120.60 |
|
*Thru
24" Wide Belt Only. |
|
|
|
|
| MOTORS |
Extra
Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3
Ph.–60 Hz.–Totally Enclosed. Speed
affects horsepower requirements. |
|
H.P.
REQ.
|
TOTALLY ENCLOSED
|
ENERGY EFFICIENT
|
BRAKE
MOTORS
|
|
200/208/230/
460/575 V
3 Ph.-60 Hz.
|
115/230
V
1 Ph.- 60
Hz.
|
230/460V
3 Ph.-60 Hz.
|
575 V
3 Ph.- 60 Hz
|
"SSB"
208/230/
460/575 V
3 Ph.-60 Hz.
|
"HCB"
208/230/
460/575 V
3 Ph.-60 Hz.
|
"HCB"
208/230/
460/575 V
3 Ph.-60 Hz.
|
"D"
115/230 V
1 Ph.-60 Hz.
|
|
1/2
|
N/C |
$22.30 |
$228.85 |
$228.85 |
N/A |
$879.33 |
$1,961.59** |
N/A |
|
1
|
$37.04 |
$81.76 |
$284.47 |
$284.47 |
$600.24 |
$1,155.29 |
$2,082.79** |
$696.15 |
|
2
|
$298.38 |
$688.83 |
$554.93 |
$554.93 |
$936.14 |
$1,382.45 |
$2,226.41** |
$1,800.95 |
|
*
Note: "High Cycle Brakemotors" are used for indexing
and are rated for 30 cycles per minute. Add-On Prices
Include 5AC Reducer, Heavy Duty Motor Base Plate, and #50 Chain
and Sprockets with Taper Bushed Hubs.
** Note: "High Cycle Brakemotor" Add-On Prices Include
5AC Reducer, Heavy Duty Motor Base Plate and
Timing Belt Drive.
Note: SSB and D Series are Holding Brakes and are NOT rated
for cycling.
Note: “High Cycle Brakemotors” are available with
Center Drive Only. |
|
POWER
FEEDER
|
Prices
for Powered Feeder Include:
Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys
NOTE: Adjustable Floor Supports Not Included In Base
Price
NOTE: Overall length of 29-1/2” requires 1 support.
Overall length of 44-1/2” or more requires 2 supports.
Gravity Conveyor Bracket with “Pop-Out” Roller
on Tail End (Through 24” Wide Belt Only) |
|
NOTE:
NO DEDUCT for Feeders less than minimum
lengths. Shorter lengths COULD CAUSE IMPROPER
BELT TRACKING.
NOTE: With System End Roller Assembly Add 6”
to OAL. Underside Take-Up required on Incline
Units with Power Feeders and End Drives. |
|
|
|
CHAIN DRIVEN TYPE |
Belt
Width |
6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
Min.
Length
Overall |
29 1/2" |
29 1/2" |
29 1/2" |
29 1/2" |
44 1/2" |
44 1/2" |
44 1/2" |
44 1/2" |
59 1/2"
|
71 1/2"
|
|
Price |
$818 |
$866 |
$914 |
$962 |
$1,115 |
$1,166 |
$1,217 |
$1,268 |
$1,616 |
$1,968 |
Price
Per
Foot |
$52.39 |
$57.19 |
$61.86 |
$66.41 |
$71.09 |
$75.76 |
$81.87 |
$86.55 |
$95.90 |
$109.81 |
|
| #50
O-Ring Chain on Slave Connection. ........... Add .....................
$115.92 |
|
POLY-TIER
SUPPORTS
|
 |
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES. . .
• Check for Clearance.
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
PRICES
FOR COMPLETE CONVEYOR
INCLUDE:
• Painted Steel Support Legs
• Adjustable Crosspipe Assembly
• Knee Braces (1 set per level of conveyor)
• “U” Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
CAPACITY
DATA:
1500 lbs. ...........per cross pipe
4500 lbs. ...........per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
|
(2) TIER POLY-TIER SUPPORTS |
|
36" |
$112.69 |
|
42" |
$115.32 |
|
48" |
$117.96 |
|
54" |
$120.60 |
|
60" |
$123.24 |
|
66" |
$125.87 |
|
72" |
$128.51 |
|
78" |
$131.15 |
|
84" |
$133.67 |
|
90" |
$136.30 |
|
96" |
$138.94 |
|
102" |
$141.58 |
|
108" |
$144.22 |
|
114" |
$146.85 |
|
120" |
$149.49 |
|
|
|
(3) TIER POLY-TIER SUPPORTS |
|
36" |
$135.10 |
|
42" |
$137.74 |
|
48" |
$140.38 |
|
54" |
$143.02 |
|
60" |
$145.65 |
|
66" |
$148.29 |
|
72" |
$150.93 |
|
78" |
$153.57 |
|
84" |
$156.08 |
|
90" |
$158.72 |
|
96" |
$161.36 |
|
102" |
$164.00 |
|
108" |
$166.63 |
|
114" |
$169.27 |
|
120" |
$171.91 |
|
|
|
|
|
|
| ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
MANUAL
START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$117.96 |
|
|
|
|
#033.2032
& #033.2072..................$109.93
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$160.67
Nema 4 |
|
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
#032.103.......................................... |
$277.28 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
|
|
LIMIT
SWITCH, TIME DELAY-ON,
WITH NYLON ROLLER LEVEL |
|
|
 |
|
|
|
|
REMOTE
CONTROL ROD |
|
|
|
|
|
|
|
|
|
#033.2052
& #033.2072.................$414.31
Nema 4 |
|
Price
per foot of bed length "L"...........$5.27
Use with standard Reversing Drum Switch,
ONLY. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
 |
 |
FOOT
SWITCH WITH GUARD |
|
|
#032.209.........................................$113.77
115 Volt AC or 24 Volt DC, two wire with
ground, 30mm dia., 10mm range
|
#032.200.............................................$149.85
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
PHOTO
EYE, ON-OFF TYPE |
 |
POWER
CORD AND PLUG (20') |
|
#033.2122......................................$352.68
115 Volt, relay output, light or dark energized, and includes
Reflector. |
| Price................................................. |
$59.10 |
|
(Motor
HP and voltage, etc., must be specified
to size power cord and plug. Max. 1-1/2 HP 1
Phase, 2 HP 3 Phase.) |
|
|
DUAL
TIME DELAY MODULE |
|
|
|
|
|
|
#033.2172.......................................$127.55
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off) |
|
|
|
|
|
|
|
|
|
"EMERG.
STOP" PULL CORD SWITCH |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$383.38
Nema 4 |
|
|
|
|
|
|
|
|
|
|
|
|
B-05165...........................................$65.34 |
|
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
|
#032.281...one
side.................$4.07 per / ft.
both
sides..............$8.51 per / ft. |
|
#094.191........................................$364.08
Nema 4 |
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
|
|
|
|
#032.284.............................................$115.93
Nema 4 |
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
|
|
|
|
#032.212
(100mm range, 3.94")......$162.68
#032.2125 (200mm range, 7.87")....$162.68
#033.218 (400mm range, 15.74")....$162.68 |
|
|
|
|
|
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
#033.212B
with 032.21122 Cable.....$248.39
#032.21122 (Cable Only)..................$ 39.92 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC
VARIABLE SPEED DRIVE ADD-ON PRICES
|
|
REPLACEMENT
CONTROLLER
|
|
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208/230 VOLT |
|
1/2 |
EA-VSC-12-10 |
EA-VSC-12-12 |
|
Price |
$1,015.93 |
$858.49 |
|
1 |
EA-VSC-12-11 |
EA-VSC-12-13 |
|
Price |
$1,187.65 |
$1,051.65 |
|
2 |
N/A |
EA-VSC-12-14 |
|
Price |
~ |
$1,592.49 |
|
THREE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
208/230 VOLT |
ADD ON PRICE
460 VOLT |
|
1/2 |
EA-VSC-01-15 |
EA-VSC-01-18 |
|
Price |
$975.84 |
$1,119.00 |
|
1 |
EA-VSC-01-16 |
EA-VSC-01-19 |
|
Price |
$1,111.72 |
$1,250.63 |
|
2 |
EA-VSC-01-17 |
EA-VSC-01-20 |
|
Price |
$1,592.49 |
$1,705.48 |
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
Motor Size |
115 Volt |
208/230 Volt |
|
1/2 |
VSC-10 |
VSC-12 |
|
Price |
$827.54 |
$659.78 |
|
1 |
VSC-11 |
VSC-13 |
|
Price |
$956.53 |
$771.70 |
|
2 |
N/A |
VSC-14 |
|
Price |
~ |
$995.43 |
|
THREE PHASE CONTROLLER INPUT
|
|
Motor Size |
208/230 Volt |
460 Volt |
|
1/2 |
VSC-15 |
VSC-18 |
|
Price |
$876.75 |
$918.82 |
|
1 |
VSC-16 |
VSC-19 |
|
Price |
$876.75 |
$995.43 |
|
2 |
VSC-17 |
VSC-20 |
|
Price |
$1,097.69 |
$1,148.63 |
|
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
HP |
Part No. |
Price |
|
1/2 |
032.351 |
$450.11 |
|
1 |
032.353 |
$488.05 |
|
2 |
032.355 |
$579.13 |
|
| Brake
Relay Kit (EA-068A).............................. |
$299.70 |
|
|
|
IMPORTANT
NOTES...
|
|
|
•
NOTE #1: Add on price includes standard motor deduct.
• NOTE #2: 2 HP Add On Price includes 5AC reducer
upgrade.
• NOTE #3: All above motors are 230 / 460 Volt,
3 Phase.
• NOTE #4: All above V/S Drive Kits include NEMA
1 / IP30 Junction Box, Controller and Motor.
• NOTE #5: Good for cycle rates of up to 15 cycles
per
minute,
at 1/2 second ramp time, with a
maximum speed of 250 FPM.
• NOTE #6: Drawing No. DG-001146.
• NOTE #7: When AC Variabl Speed Controller is used
with
a Brake Motor, A Brake Relay Kit
(EA-068A) is required. Add an additional
$299.70 for this option.) |
|
|
|
|
|
|
|
NOTES
|
|
|
•
NOTE #1: All above motors are 230/460 Volt,
3 Phase.
• NOTE #2: All above V/S Controllers are mounted
in NEMA 1 / IP30 Junction Box. |
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE
|
|
Part No. |
Description |
Price |
|
EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$2,887.55 |
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-on . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
|
|
NOTES
|
|
KIT
INCLUDES
|
|
|
•
NOTE #1: Good for cycle rates of up to 60 cycles
per minute.
• NOTE #2: 1/10 second Accel and Decel time, with
350 FPM Maximum Speed.
• NOTE #3: 460 Volt Only, Other Voltages, Contact
us.
• NOTE #4: Motor Cooling Blower is 115 Volt,
1 Phase, 60 Hz.
• NOTE #5: Drawing No. EA-VSC-CB.
• NOTE #6: Price Includes 5AC Reducer and #60
Chain
and Sprockets |
|
Part No. |
Description |
|
VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
|
032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Part No. |
Description |
|
VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
|
032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
|
|
|
|
An
International Electrotechnical Commission (IEC) term that
means: “under short circuit
conditions, the starter shall cause no danger to persons or
installation and shall be
suitable for further use.” The only allowable damage
to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters
meeting this level of com-
ponent protection provides users with less down time and lower
replacement costs.
|
|
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC
STARTERS
|
|
H.P.
|
MOTOR
DUTY
|
NON-REVERSING
|
REVERSING
|
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
|
1/2
|
STANDARD EASY
CLEAN ENERG. EFF.
|
EN-20B40
|
EN-23B25
|
EN-46B16
|
EN-57B10
|
$601.32
|
ER-20B40
|
ER-23B25
|
ER-46B16
|
ER-57B10
|
$769.87
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B16
|
EN-46B10
|
|
|
ER-23B16
|
ER-46B10
|
|
|
3/4
|
GEARMOTORS
|
EN-20B40
|
EN-23B40
|
EN-46B16
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B16
|
ER-57B16
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
1
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20B40
|
EN-23B40
|
EN-46B25
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B25
|
ER-57B16
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
1-1/2
|
GEARMOTORS
|
EN-20C10
|
EN-23B63
|
EN-46B40
|
EN-57B25
|
ER-20C10
|
ER-23B63
|
ER-46B40
|
ER-57B25
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
2
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20C10
|
EN-23C10
|
EN-46B40
|
EN-57B40
|
ER-20C10
|
ER-23C10
|
ER-46B40
|
ER-57B40
|
|
|
EN-23C10
|
EN-46B40
|
|
|
ER-23C10
|
ER-46B40
|
|
|
|
EN-23B63
|
EN-46B40
|
|
|
ER-23B63
|
ER-46B40
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
|
|
H.P.
|
NON-REVERSING
|
REVERSING
|
NON-REVERSING
|
REVERSING
|
|
|
115 VOLT
|
PRICE
|
115 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
|
1/2
|
EN-1SC10
|
$541.02
|
ER-1SC10
|
$769.87
|
EN-2SB63
|
$652.38
|
ER-2SB63
|
$847.20
|
|
3/4
|
EN-1SC16
|
$559.60
|
ER-1SC16
|
EN-2SB63
|
ER-2SB63
|
|
1
|
EN-1SC16
|
ER-1SC16
|
EN-2SC10
|
ER-2SC10
|
|
1-1/2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
|
OPTIONAL
STARTER CONTROLS
|
033.1955
|
$76.13 |
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
|
|
EA-011
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
|
|
|
| 033.1965 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
|
|
|
| 033.1975 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
•
NOTE #1: All starters listed above require 115 Volt
Control Voltage.
• NOTE #2: Above starters are in Nema 3, 4 and 12
Enclosures.
• NOTE #3: The starters included Safety Disconnect,
Overload Relay, and Aux. Contacts as required.
• NOTE #4: IF AN ORDER IS SUPPLIED LESS
MOTOR, AND IS SUPPLYING ANY
ELECTRICAL CONTROLS, THEN MOTOR HP,
VOLTAGE, PHASE, AND FULL LOAD CURRENT
MUST BE STATED ON THE ORDER.
• NOTE #5: PRICING LISTED IS NOT MOUNTED
OR WIRED. |
|
|
|
EA-012
(115 Volt)
EA-017 (230 Volt)
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting
Bracket. |
$1,123.88 |
|
|
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
#033.2122
B-05165 |
$65.34 |
|
|
|
|
| •
NOTE #6: Add on |
$107.17 |
for
the above Push Buttons |
|
|
|
|
|
|
|
|
to
be Mounted. |
|
|
|
|
|
|
| •
NOTE #7: Add on |
$214.47 |
for
the above Starters to be |
|
|
|
|
|
Mounted
and Wired. |
|
|
|
|
|
|
| •
NOTE #8: Add on |
$321.28 |
for
the above Starters and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push
Button Stations to be Mounted and Wired. |
|
|
|
|
CONVEYOR
WEIGHT TABLE
|
SIZE
TO
ORDER
Overall
Length
"A" |
Bed
Length
"L" |
Overall
Length
with
Center
Drive |
Drive
Pulley |
Black Friction Surface Belt Widths
|
|
6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
|
Between Side Guards
|
|
7" |
9" |
11" |
13" |
15" |
17" |
19" |
21" |
25" |
31" |
|
Overall Bed Widths
|
|
8" |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
26" |
32" |
|
6’ |
5’ |
6’ |
4" Dia.
|
254 |
267 |
277 |
287 |
297 |
320 |
330 |
358 |
381 |
404 |
|
11’ |
10’ |
11’ |
301 |
316 |
330 |
344 |
358 |
398 |
412 |
427 |
452 |
477 |
|
16’ |
15’ |
16’ |
369 |
388 |
407 |
425 |
443 |
501 |
520 |
539 |
573 |
607 |
|
21’ |
20’ |
21’ |
422 |
445 |
468 |
490 |
512 |
535 |
558 |
581 |
627 |
696 |
|
26’ |
25’ |
26’ |
491 |
519 |
546 |
573 |
599 |
627 |
655 |
683 |
739 |
823 |
|
31’ |
30’ |
31’ |
538 |
570 |
601 |
632 |
662 |
694 |
726 |
758 |
822 |
918 |
|
36’ |
35’ |
36’ |
535 |
621 |
656 |
694 |
737 |
773 |
810 |
846 |
919 |
1029 |
|
41’ |
40’ |
41’ |
655 |
695 |
735 |
759 |
813 |
853 |
894 |
935 |
1017 |
1140 |
|
46’ |
45’ |
46’ |
702 |
747 |
760 |
836 |
892 |
932 |
978 |
1023 |
1114 |
1249 |
|
51’ |
50’ |
51’ |
775 |
825 |
874 |
923 |
971 |
1022 |
1072 |
1122 |
1222 |
1372 |
|
56’-4” |
55’ |
56’ |
8" Dia.
|
822 |
876 |
929 |
985 |
1046 |
1101 |
1156 |
1210 |
1319 |
1481 |
|
61’-4” |
60’ |
61’ |
892 |
950 |
1008 |
1065 |
1122 |
1181 |
1240 |
1299 |
1417 |
1594 |
|
66’-4” |
65’ |
66’ |
939 |
1001 |
1063 |
1127 |
1197 |
1260 |
1324 |
1387 |
1514 |
1703 |
|
71’-4” |
70’ |
71’ |
1013 |
1081 |
1148 |
1215 |
1281 |
1351 |
1419 |
1487 |
1623 |
1827 |
|
76’-4” |
75’ |
76’ |
1060 |
1132 |
1203 |
1277 |
1356 |
1430 |
1503 |
1575 |
1720 |
1936 |
|
81’-4” |
80’ |
81’ |
1130 |
1206 |
1282 |
1357 |
1432 |
1521 |
1587 |
1664 |
1818 |
2049 |
|
86’-4” |
85’ |
86’ |
1146 |
1257 |
1337 |
1419 |
1507 |
1589 |
1671 |
1752 |
1915 |
2158 |
|
91’-4” |
90’ |
91’ |
1177 |
1331 |
1415 |
1499 |
1582 |
1669 |
1754 |
1839 |
2039 |
2324 |
|
96’-4” |
95’ |
96’ |
1293 |
1382 |
1470 |
1561 |
1657 |
1748 |
1838 |
1927 |
2136 |
2433 |
|
101’-4” |
100’ |
101’ |
1363 |
1456 |
1549 |
1641 |
1733 |
1828 |
1922 |
2016 |
2204 |
2486 |
|
| All
weights are conveyor weights only. Accessories, crating,
etc., are not included. |
|
|
Belt Conveyors,
Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors,
Troughed Bed, and Slider Bed from your source for
material handling equipment.
|
Back
to Product Category |
 |
|
