|
ENGINEERED
STEEL PRODUCTS |
Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 In RI:(401) 421-0314 Fax:(401) 421-5679 |
|
|
|
Back to Product Category
|
HOW
IT WORKS |
The
conveyor is made up of drive, intermediate and tail sections on which two
strands of 2060 double-pitch chain
travel. Each strand is a continuous loop and driven by a common drive shaft.
EZ-Logic accumulation modules sense
product presence and control the accumulation and release of product from
the zones. To accumulate products
accumulation lift pads are activated which lift the product off of chain
strands. |
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
STANDARD
SPECIFICATIONS |
|
|
|
CHAIN#60 single pitch conveyor chain (straight sidebar). |
|
IOPProvides 27VDC,
100 watt power for EZLogic
accumulation system - contains slots for 4 input/output
boards. Requires 120VAC or 230VAC single
phase input. |
|
|
CHAIN GUIDE UHMW polyethylene. |
|
|
|
FRAME 6 in. x 7 ga. powder painted formed steel
angle with 1-1/2 in. x 3/16 wall, chain support tube.
4 Ga. formed coupling channels located at infeed and
discharge ends of each module. |
|
|
|
|
AIR REQUIREMENTS Recommended working
pressure 60 P.S.I. Free air consumption at 75 P.S.I
- .50 cu. ft. per actuation for 18 & 21
strand
centers - 1.0 cu. ft. per actuation for 24 - 28 strand
centers. |
|
|
DRIVE SPROCKETS
Hardened #60 with 1 3/8 in.
dia. steel shaft. |
|
|
|
|
|
|
BEARINGS Sealed, pre-lubricated, self aligning,
ball bearings on drive. |
|
|
|
FILTER, REGULATORSupplied for main air
supply line (1/2 in. NPT port). Includes pressure
sensor. |
|
|
|
|
|
|
|
MOTOR 1-1/2 HP 230/460V 3 PH. 60 HZ.
gear motor, located underneath in 5 ft. long module. |
EZLogic® ZONE CONTROLLERLocated in
each zone (Diffuse). NEMA 1, 2, IP62. UL
approved. |
|
|
|
|
CONVEYING SPEED 35 FPM. |
|
|
|
|
|
|
|
CAPACITY12,000 lbs. maximum at 30 FPM
(1-1/2 HP maximum). NOT TO EXCEED
CAPACITY IN CHART. |
ACCUMULATION ZONES36 in., 42 in., 48 in.,
54 in., 60 in., and 66 in. long intermediate sections
with
EZLogic® Accumulation (Diffuse). Contact us
for other lengths. (Drive Section minimum 60 in. long.) |
|
|
|
|
FLOOR SUPPORTSNow
supplied as optional
equipment. |
|
|
|
|
|
|
EZ-Logic®
Accumulation system |
|
LOAD
CAPACITY CHART (Accumulated or Live)* @ 30 FPM |
EZ-Logic®,
or Electronic Zero-pressure Logic Accumulation
System, combines the sensing accuracy of photo-electronics
with discrete electronic logic control without the use of a PLC
or pneumatic logic components. The EZ-Logic® Accumulation
System provides many features including: |
|
HP |
TOTAL
LOAD (Lbs.) |
UP TO 50' |
UP TO 102' |
1-1/2 |
12,000 |
10,000 |
|
|
*
Load capacities in accumulation mode are calculated assuming
no more than two unit loads will be moving at any time. |
Zero-pressure
accumulation of product |
|
Zone
Stop-function is built in! Any zone may be transformed
into a workstation by connecting the EZ-Logic® Accumulation
Module to any dry contact type switching device. The feature
is always used at the discharge end of the conveyor line, and
may be used at any other location where a zone stop is required. |
|
|
|
|
|
|
|
Dynamic
Zone Allocation Automatically adjusts the
conveyors zone length to accommodate the length of the
product being conveyed. Improves conveyor efficiency
and system flexibility. |
|
|
Unloading
Zone Feature - Zone On Delay Timer delays the
zone immediately upstream from a removed load, preventing it
from driving for a set time. This feature is ideal where loads are
routinely removed from the conveyor with a lift
truck. |
|
|
Loading
Zone Feature Zone detects load being placed onto
the conveyor with a fork truck and stops the zone from driving
and automatically prevents any loads in zones upstream from
entering loading area. |
|
|
|
Conveyor
shown with optional 60F single pitch chain. |
|
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
(2) Strands of #60 single pitch chains. |
|
1 1/2 HP 208/230/460/575/3/60 Gearmotor |
UHMW polyethylene chain guides. |
|
30 FPM constant speed. |
6" x 7 Ga. powder painted
formed steel frame. |
|
2060 BTB15H drive sprockets with
1-3/8" dia. shaft. |
Accumulation Zones with EZLogic®
(Diffuse)
Accumulation System NEMA 1, 2, IP 62. UL
Approved. |
|
Filter Regulator. |
|
Less Motor controls. |
|
Less Supports |
27 VDC 100 Watt Power Supply for Zone Controllers
(Requires 120VAC or 230 V AC Single Phase Input) |
|
NOTE:
Pushbutton Programmer or Programming
Kit for PC NOT INCLUDED in listed price. See
EZLogic Components pages for information and pricing. |
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
|
2-Strand
Design |
|
|
|
SIZE TO
ORDER
OVERALL
LENGTH "A" |
FRAME
WIDTH |
19-7/8” |
22-7/8” |
25-7/8” |
28-7/8” |
31-7/8” |
34-7/8” |
37-7/8” |
40-7/8” |
43-7/8” |
46-7/8” |
49-7/8” |
STRAND CENTERS |
18” |
21” |
24” |
27” |
30” |
33” |
36” |
39” |
42” |
45” |
48” |
BASE LENGTH 12'-0" |
$6,376 |
$6,396 |
$6,416 |
$6,436 |
$6,457 |
$6,477 |
$6,530 |
$6,517 |
$6,537 |
$6,557 |
$6,578 |
Add for each
Accumulation Zone |
$2,367
(per zone) |
Per Foot |
$120.99 |
$124.32 |
$128.76 |
$132.09 |
$135.42 |
$138.75 |
$142.08 |
$146.52 |
$149.85 |
$153.18 |
$156.51 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START
SWITCH or
SAFETY DISCONNECT |
|
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
|
|
|
|
#032.1014......................................... |
$150.06 |
|
|
|
#033.2032
& #033.2072..................$203.25
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$233.95
Nema 4 |
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
#032.103.......................................... |
$446.25 |
|
|
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
|
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
REMOTE
CONTROL ROD |
|
|
|
|
|
#032.210.........................................$144.70
115 Volt AC, two wire with ground, 30mm dia.,
10mm range |
|
|
|
|
|
|
|
Price
per foot of bed length "L"...........$6.78
Use with standard Reversing Drum Switch,
ONLY. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$171.12
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
|
|
|
|
|
FOOT
SWITCH WITH GUARD |
|
|
|
|
#032.200........................................... $190.52
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
PHOTO
EYE, ON-OFF TYPE |
|
#033.2122......................................$549.78
115 Volt, relay output, light or dark energized,
and includes Reflector. |
|
|
|
|
|
|
|
POWER
CORD AND PLUG (20') |
|
|
DUAL
TIME DELAY MODULE |
|
|
|
|
|
|
|
|
|
|
|
|
#033.2172.......................................$191.59
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off) |
POWER
CORD WITH PLUG ONLY 20' LONG |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1A |
115/1 |
1/2-3/4 |
|
EA-039-2A |
115/1 |
1 |
|
EA-039-3A |
115/1 |
1
1/2 |
|
EA-039-4A |
230/1 |
1/2-1 |
|
EA-039-5A |
230/1 |
1
1/2-2 |
|
EA-039-6A |
208-230/3 |
1/2-2 |
|
EA-039-7A |
460/3 |
1/2-2 |
|
|
POWER
CORD WITH PLUG 20' LONG WITH MANUAL
START SWITCH AND MOUNTING BRACKET |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1B |
115/1 |
1/2-3/4 |
|
EA-039-2B |
115/1 |
1 |
|
EA-039-3B |
115/1 |
1
1/2 |
|
EA-039-4B |
230/1 |
1/2-1 |
|
EA-039-5B |
230/1 |
1
1/2-2 |
|
EA-039-6B |
208-230/3 |
1/2-2 |
|
EA-039-7B |
460/3 |
1/2-2 |
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$83.06 |
|
|
|
|
AIR
PRESSURE SWITCH |
|
#094.191........................................$487.07
Nema 4 |
|
|
|
|
|
|
|
|
|
EMERG.
STOP PULL CORD SWITCH |
|
|
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$490.40
Nema 4 |
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
#032.281...one
side.................$5.24 per / ft.
both
sides............$10.47 per / ft. |
|
|
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
#032.284..........................................$158.27
Nema 4 |
|
|
|
|
Control
cable for the Emergency Stop to be
mounted and wired to the magnetic starter,
supply cable and hardware.... $3.21 per foot. |
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.212
(100mm range, 3.94")......$206.70
#032.2125 (200mm range, 7.87")....$206.70
#033.218 (400mm range, 15.74")....$206.70 |
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128
with 032.21122 Cable.....$315.71
#032.21122 (Cable Only)..................$50.81 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
AC VARIABLE
SPEED DRIVE ADD-ON PRICES |
|
REPLACEMENT
CONTROLLER |
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE) |
SINGLE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208/230 VOLT |
1/2 |
EA-VSC-12-10 |
EA-VSC-12-12 |
Price |
$1,290.08 |
$1,090.16 |
1 |
EA-VSC-12-11 |
EA-VSC-12-13 |
Price |
$1,508.21 |
$1,335.66 |
2 |
N/A |
EA-VSC-12-14 |
Price |
~ |
$2,006.22 |
THREE PHASE CONTROLLER INPUT |
H.P. |
ADD ON PRICE
208/230 VOLT |
ADD ON PRICE
460 VOLT |
ADD
ON PRICE
575 VOLT |
1/2 |
EA-VSC-01-15 |
EA-VSC-01-18 |
EA-VSC-12-29 |
Price |
$1,239.27 |
$1,420.98 |
$1,937.44 |
1 |
EA-VSC-01-16 |
EA-VSC-01-19 |
EA-VSC-12-29 |
Price |
$1,411.82 |
$1,588.17 |
$1,981.11 |
2 |
EA-VSC-01-17 |
EA-VSC-01-20 |
EA-VSC-12-30 |
Price |
$2,022.41 |
$2,165.92 |
$2,599.79 |
|
|
|
|
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY |
SINGLE PHASE CONTROLLER INPUT |
Motor Size |
115 Volt |
208/230 Volt |
1/2 |
VSC-12-10 |
VSC-12-12 |
Price |
$1,051.01 |
$838.00 |
1 |
VSC-12-11 |
VSC-12-13 |
Price |
$1,214.99 |
$980.08 |
2 |
N/A |
VSC-12-14 |
Price |
~ |
$1,264.26 |
THREE PHASE CONTROLLER INPUT |
Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
1/2 |
VSC-01-15 |
VSC-01-18 |
VSC-12-29 |
Price |
|
|
|
1 |
VSC-01-16 |
VSC-01-19 |
VSC-12-29 |
Price |
|
|
|
2 |
VSC-01-17 |
VSC01--20 |
VSC-12-30 |
Price |
|
|
|
|
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$272.63 |
|
|
|
|
|
Brake
Relay Kit (EA-068A).............................. |
$380.92 |
|
|
|
|
|
|
IMPORTANT
NOTES... |
|
|
Add on price includes standard motor deduct.
2 HP Add On Price includes 5AC reducer upgrade.
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
Drawing No. DG-001146. |
|
|
|
|
|
When AC Variabl Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $380.92 for this option.) |
|
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE |
Part No. |
Description |
Price |
EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$3,670.79 |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on . .
(mounted close to the motor) |
$272.63 |
|
|
|
|
|
|
KIT INCLUDES |
|
|
|
Part No. |
Description |
VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT
NOTES |
|
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
Sprockets |
Part No. |
Description |
VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
|
|
|
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined) |
|
|
|
An International
Electrotechnical Commission (IEC) term that means: under short
circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use. The only allowable damage to the starter
is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs. |
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
MOTOR
DUTY |
NON-REVERSING |
REVERSING |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
1/2 |
STANDARD EASY
CLEAN ENERG. EFF. |
|
|
|
|
$951.88 |
|
|
|
|
$1,158.11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 |
GEARMOTORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
NON-REVERSING |
REVERSING |
NON-REVERSING |
REVERSING |
|
115 VOLT |
PRICE |
115 VOLT |
PRICE |
230 VOLT |
PRICE |
230 VOLT |
PRICE |
1/2 |
|
$833.00 |
|
1064.93 |
|
$969.85 |
|
$1,181.91 |
1 |
|
$833.00 |
|
|
|
1-1/2 |
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
Manual Start-Stop Switch Kit |
|
Start-Stop Push Button Kit, Remote Mounted |
|
EA-000001 ...................................... |
$170.53 |
|
|
EA-000002....................................... |
$150.18 |
|
Includes:
032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware |
|
|
Includes:
033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware |
|
|
|
|
|
Forward-Reverse-Stop Push Button Kit,
Remote Mounted |
|
|
|
|
|
|
|
Up-Down-Stop Push Button Kit, Remote
Mounted |
|
EA-000003....................................... |
$300.24 |
|
|
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware |
|
|
EA-000004....................................... |
$300.24 |
|
|
|
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Start-Stop Push-button Station |
|
Start-StopPush-button Station |
033.1955
|
$138.04 |
|
|
033.195................................................. |
$100.32 |
Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
Fwd-Rev-Stop Push-button Station |
|
Fwd-Rev-StopPush Button Station |
033.1965 |
$270.13 |
|
|
033.196.................................................. |
$345.81 |
Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
Up-Down-Stop Push-button Station |
|
OPTIONAL
STARTER CONTROLS |
033.1975 |
$248.00 |
|
|
Auto Restart Control, 3 Phase, Non-Reversing |
Remote
mounted, Nema 1 |
|
|
|
EA-011
............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$1,880.20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Control Cable for the Push button to be mounted and |
|
|
|
wired, supply cable, and hardware........ |
$3.33 |
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES |
|
|
|
Control Circuit Transformer Included for 115 Volt
Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
AND IS SUPPLYING ANY ELECTRICAL
CONTROLS, THEN MOTOR HP, VOLTAGE,
PHASE, AND FULL LOAD CURRENT MUST BE
STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED. |
|
|
|
|
|
|
|
|
Auto Restart Control, 1 Phase, Non-Reversing |
|
|
EA-012
(115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket. |
$1,787.62 |
|
|
$1,989.09 |
|
|
|
Add on |
$136.37 |
for
the above Push Buttons |
|
|
|
to
be Mounted. |
|
|
|
Add on |
$272.63 |
for
the above Starters to be |
|
|
|
|
|
|
|
Mounted
and Wired. |
|
|
|
|
|
Mounting Brackets for photo eye |
Add on |
$408.53 |
for
the above Starters and |
|
|
#033.2122
B-05165 .............................................. |
|
Push
Button Stations to be Mounted and Wired. |
|
|
$83.06 |
|
|
|
|
|
|
|
|
|
Shipping
Schedule |
|
Solid Blue or Black prices with Brown shading
indicates items available for 3-Day shipment. |
|
Solid Blue or Black prices indicates items available for 2-Week shipment. |
|
Solid
Green model numbers or prices indicate items available for 24-Hour Shipment. |
|
Prices
coded in light blue call for lead time. |
|
Prices
coded in red ship in 4-Weeks. |
|
EZ-LOGIC®
COMPONENTS |
|
|
|
While featuring the same EZLogic®
familiarity, GEN3 incorporates new technologies
for ease of installation, operation,
and maintenance. |
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
ZONE
CONTROLLERS |
|
|
|
|
|
|
|
|
|
|
|
|
Retro-Reflective
Type Zone Controller |
|
|
|
Zone
controller including mounting base and unitized retro-reflective transducer.
032.501 .......................................................................................................................... |
|
|
$204.68 |
|
|
|
|
|
Diffuse Type
Zone Controller |
|
|
|
Zone
controller including mounting base and unitized diffuse transducer with
adjustable
sensitivity (through programming). |
|
|
032.502
.................................. Add-On ............................................Per
Zone ...................... |
$18.92 |
|
032.502
.................................. Replacement ........................................................................... |
$223.60 |
|
|
|
|
|
Enhanced Retro-Reflective
Zone Controller |
|
|
|
Same
as standard, plus used for IOP communication, and addressable remote access. |
|
|
032.505
.................................. Add-On ............................................Per
Zone ................... |
$132.33 |
|
032.505
.................................. Replacement ........................................................................ |
$252.28 |
|
|
|
|
|
Enhanced
Diffuse Zone Controller |
|
|
Same
as standard, plus used for IOP communication, and addressable remote access. |
|
|
032.506
.................................. Add-On ............................................Per
Zone ................... |
$151.13 |
|
032.506
.................................. Replacement ........................................................................ |
$269.30 |
|
|
|
|
|
Remote
Zone Controller |
|
|
Zone
controller including mounting base. Connectorized for attaching any remote
transducer. |
|
|
032.504
.................................. Replacement ........................................................................ |
$204.68 |
|
Enhanced Remote
Zone Controller |
|
|
|
Enhanced
zone controller including mounting base. Connectorized for attaching any
remote
transducer. Same as standard, plus used for IOP communication, and addressable
remote
access. |
|
|
032.507
.................................. Replacement ........................................................................ |
$226.22 |
|
|
|
|
|
|
|
|
|
TRANSDUCERS
(SENSORS) |
|
|
|
|
|
|
|
Remote
Diffuse Transducer (Narrow Beam) |
|
|
Has
narrow beam for use with close roller centers. Attaches to any remote zone
controller and allows transducer to be mounted separate from controller. |
|
|
032.513
.................................. Replacement .................................. |
$93.89 |
|
|
|
|
|
|
|
|
|
|
|
CORDSETS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zone
Controller Cordset (Zone to Zone Communication)
Available for the following zone lengths: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12"
.......................................................032.551.................................................. |
$50.81 |
|
|
18"
.......................................................032.552.................................................. |
$50.81 |
|
|
24"
.......................................................032.553.................................................. |
$50.81 |
|
|
30"
.......................................................032.554.................................................. |
$50.81 |
|
|
36"
.......................................................032.555.................................................. |
$50.81 |
|
|
48"
.......................................................032.556.................................................. |
$54.50 |
|
|
60"
.......................................................032.557.................................................. |
$56.41 |
|
|
72"
.......................................................032.558.................................................. |
$75.09 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Zone
Controller Screw-On Cordset (NEMA 4X Zone to
Zone Communication for Wash Down Application)
Available for the following zone lengths: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12"
.......................................................032.5515.................................................. |
$50.81 |
|
|
18"
.......................................................032.5525.................................................. |
$50.81 |
|
|
24"
.......................................................032.5535.................................................. |
$50.81 |
|
|
30"
.......................................................032.5545.................................................. |
$50.81 |
|
|
36"
.......................................................032.5555.................................................. |
$50.81 |
|
|
48"
.......................................................032.5565.................................................. |
$59.14 |
|
|
60"
.......................................................032.5575.................................................. |
$60.69 |
|
|
72"
.......................................................032.5585.................................................. |
$78.66 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Infeed
Zone Terminator |
|
Terminates
zone to zone communication at infeed zone. |
|
|
|
032.550
.................................. Each ............................................................. |
$50.81 |
|
|
|
|
|
|
|
|
|
|
|
Mounting
Base |
|
|
|
Use
to mount any Zone Controller. |
|
|
032.517
.............. Each .............. |
$18.80 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
IOP |
|
|
|
|
|
|
|
|
|
IOP |
|
|
|
Provides
27VDC, 100 watt power for EZLogic accumulation
system. Requires 120 VAC or 230 VAC single phase input.
Operates up to 50 zones (25 zones each side of IOP). contains
slots for 4 input/ output boards. Requires enhanced zone controllers
to communicate with input/output boards. |
|
|
032.582
.................................. Each ....................... |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IOP
"T" Cable |
|
|
|
|
|
Required
to deliver power and IOP communication from IOP to
zone controllers. Max. of 25 zones per each branch of T. |
|
|
|
|
Standard
Push-On 032.559 .....Each .......................... |
$69.26 |
|
|
|
|
NEMA
4X Screw-On 032.5595 .....Each .................. |
$73.30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
I/O
Board |
|
|
|
|
|
|
Plugs
into slot in IOP to provide two input/output connections.
Requires enhanced controller to receive signal. |
|
|
|
|
|
032.583
.................................. Each ............................... |
$90.20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CONFIGURATION/DIAGNOSTIC
COMPONENTS |
|
|
|
|
Push
Button Programmer |
|
Plugs
into auxiliary port of any controller to configure certain features of
controller. Required for customization of factory default settings. |
|
032.535
.................................. Each ............................... |
$168.86 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Programming Kit for PC and PC Adaptor |
|
|
|
|
Used
to connect PC USB port to auxiliary port of any controller. Includes GenesisTM
configuration software. Used to configure all
features of controller. Required for customization of factory default settings. |
|
|
|
|
K-01554
.................................. Each ............................... |
$212.53 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUXILIARY
COMPONENTS |
|
|
|
|
|
|
|
|
|
Auxiliary
I/O Module |
|
|
|
Plugs
into auxiliary port of any controller - used to
provide photo eye output or to accept a voltage type
input. |
032.532
.................................................... |
$75.09 |
|
|
Auxiliary
Input Cable |
|
|
|
|
|
|
|
Attaches
to any zone controller. Used for zone stop input, wakeup eye input,
or slug input. Available in 3 and 10 ft. lengths. |
|
|
|
|
|
|
|
|
|
|
|
|
|
3
ft. ............................032.563 ....................................Each
.................. |
$32.25 |
|
|
10
ft. ..........................032.564 ....................................Each
.................. |
$32.96 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zone
Actuation Module ZAM (Alternate Drive)
Provides NPN, PNP, or dry contact output from zone controller. |
|
|
|
032.531
......................................................Each................................ |
$75.09 |
|
|
|
|
|
|
|
|
|
Retro-Reflective
Wake-up Eye
Plugs into auxiliary port of any controller to send wake-up signal. |
|
032.591
......................................................Each................................ |
$127.81 |
|
|
|
|
|
|
|
|
Diffuse
Wake-up Eye
Plugs into auxiliary port of any controller to send wake-up signal. |
|
|
032.592
......................................................Each................................ |
$149.85 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Retro-Reflectors |
|
|
|
|
|
|
2.18
Dia. 032.218 .....................................Each ............................... |
$2.02 |
|
|
|
|
3
Dia. 033.2132 ........................................Each ................................ |
$3.57 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Connector
Covers |
|
|
|
|
|
|
Upstream
Connector Cover 032.010 .............Each ............................... |
$4.40 |
|
|
|
|
Downstream
Connector Cover 032.011..........Each ............................... |
$4.40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
CABLE
COMPONENTS |
|
|
|
|
|
|
|
|
|
|
|
Power
Isolation Cable |
|
|
|
|
|
|
|
|
Required
to isolate DC power when joining conveyors w/ separate IOPs
utilizing no more than one set of I/O boards. |
|
|
Standard
Push-On ................... 032.562 ....................Each ............. |
$41.77 |
|
NEMA
4X Screw-On ............. 032.5625 ....................................... |
$47.60 |
|
|
|
|
|
|
|
|
|
IOP
Isolation Cable |
|
|
Required
to isolate DC power and input/output signals when joining two
conveyors with separate IOPs, both utilizing I/O boards. |
|
|
|
|
|
|
|
Standard
Push-On ................... 032.570 ....................Each ............. |
$41.77 |
|
|
|
|
|
NEMA
4X Screw-On ............. 032.5705 ....................................... |
$47.60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extension
Cable (Zone to Zone Communication) |
|
|
|
|
Available
in 3 and 10 ft. lengths. Used to extend zone controller cable when necessary. |
|
|
|
|
Standard
Push-On 3 ft.................... 032.560 ....................Each ......... |
$44.86 |
|
|
|
|
Standard
Push-On 10 ft.................... 032.561 ....................Each ........ |
$58.19 |
|
|
|
|
NEMA
4X Screw-On 3 ft.............. 032.5605 .................................... |
$47.60 |
|
|
|
|
NEMA
4X Screw-On 10ft.............. 032.5615 .................................. |
$66.52 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nano
Extension Cable |
|
|
|
|
Used
to extend auxiliary devices or remote transducer cable. Available in the
following lengths: |
|
|
|
|
|
|
|
|
|
|
|
|
|
1
ft ........................... 032.565 ...........................................Replacement
................. |
$33.80 |
|
|
|
2
ft ........................... 032.566 ...........................................Replacement
................. |
$35.82 |
|
|
|
3
ft ........................... 032.567 ...........................................Replacement
................. |
$37.60 |
|
|
|
6
ft ........................... 032.568 ...........................................Replacement
................. |
$43.20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power
Splitter |
|
|
|
Used
to connect two conveyors located side by side to one IOP. Requires 2 power
supply T cables. Maximum total of 50 zones. |
|
|
032.569
...............................Each ........................ |
$44.98 |
|
|
|
|
|
SPECIAL
USE COMPONENTS |
|
|
|
|
|
|
|
|
Diffuse
Type Zone Controller |
|
|
|
|
Zone
controller including mounting base and unitized diffuse transducer with
adjustable sensitivity (through programming). 24 in. cable. |
|
|
|
032.503
.......................................Each ................................ |
$225.27 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote
Retro-Reflective Transducer |
|
|
|
|
|
Attaches
to any remote zone controller and allows transducer to be mounted
separate from controller. |
|
|
|
|
032.511
.............................................Each .............................. |
$56.41 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote
Diffuse Transducer |
|
|
|
|
|
|
Attaches
to any remote zone controller and allows transducer to be mounted
separate from controller. |
|
|
|
|
|
032.512
............................................Each .............................. |
$75.09 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote
Retro-Reflective Transducer (Dual with T Cable) |
|
|
|
|
|
|
For
use in dual head applications. Attaches to any remote zone controller
and allows addition of second remote transducer. |
|
|
|
|
|
|
|
|
|
032.514
..........................................Replacement .................. |
$150.18 |
|
|
|
|
|
|
Remote
Diffuse Transducer (Dual with T Cable) |
|
|
For
use in dual head applications. Attaches to any remote zone
controller and allows addition of second remote transducer. |
|
|
032.515
...................................................Replacement .............. |
$187.78 |
|
|
|
|
|
|
Remote
Diffuse Transducer (Narrow Beam, Dual with T Cable) |
|
|
For
use in dual head applications. Has narrow beam for use with close roller
centers. Attaches to any remote zone controller and allows addition of second
remote transducer. |
|
|
|
|
|
|
032.516
...................................................Replacement .............. |
$225.27 |
|
|
|
|
|
|
|
|
CONVEYOR
WEIGHT TABLE |
SIZE TO
ORDER
OVERALL
LENGTH
"A" |
FRAME
WIDTH |
19-7/8” |
22-7/8” |
25-7/8” |
28-7/8” |
31-7/8” |
34-7/8” |
37-7/8” |
40-7/8” |
43-7/8” |
46-7/8” |
49-7/8” |
|
STRAND
CENTERS |
18” |
21” |
24” |
27” |
30” |
33” |
36” |
39” |
42” |
45” |
48” |
12’ |
WEIGHTS
(Lbs.)
Weights based
on 60" Inter.
Frame Lengths |
615 |
641 |
667 |
694 |
720 |
748 |
774 |
801 |
827 |
851 |
880 |
17’ |
797 |
832 |
868 |
905 |
941 |
979 |
1014 |
1051 |
1087 |
1121 |
1160 |
22’ |
979 |
1023 |
1069 |
1116 |
1162 |
1210 |
1254 |
1301 |
1347 |
1391 |
1440 |
27’ |
1161 |
1214 |
1270 |
1327 |
1383 |
1441 |
1494 |
1551 |
1607 |
1661 |
1720 |
32’ |
1343 |
1405 |
1471 |
1538 |
1604 |
1672 |
1734 |
1801 |
1867 |
1931 |
2000 |
37’ |
1525 |
1596 |
1672 |
1749 |
1825 |
1903 |
1974 |
2051 |
2127 |
2201 |
2280 |
42’ |
1707 |
1787 |
1873 |
1960 |
2046 |
2134 |
2214 |
2301 |
2387 |
2471 |
2560 |
47’ |
1889 |
1978 |
2074 |
2171 |
2267 |
2365 |
2454 |
2551 |
2647 |
2741 |
2840 |
52’ |
2071 |
2169 |
2275 |
2382 |
2488 |
2596 |
2694 |
2801 |
2907 |
3011 |
3120 |
62’ |
2435 |
2551 |
2677 |
2804 |
2930 |
3058 |
3174 |
3301 |
3427 |
3551 |
3680 |
72’ |
2799 |
2933 |
3079 |
3226 |
3372 |
3520 |
3654 |
3801 |
3947 |
4091 |
4240 |
82’ |
3163 |
3315 |
3481 |
3648 |
3814 |
3982 |
4134 |
4301 |
4467 |
4631 |
4800 |
92’ |
3527 |
3697 |
3883 |
4070 |
4256 |
4444 |
4614 |
4801 |
4987 |
5171 |
5360 |
102’ |
3891 |
4079 |
4285 |
4492 |
4698 |
4906 |
5099 |
5301 |
5507 |
5711 |
5920 |
|
|
Drag Chain Conveyor, Conveyor,
Drag Chain, Low Profile Conveyor, Conveyors, and EZ-Logic from your source
for material handling
equipment. |
Back
to Product Category |
|
|