FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

MID-SIZE CART MULE®

Maximum Load capacity: 10,000 lbs
Duty Cycle: 13 hr
Recharge from full discharge: 8 to 10 hr
mid size pull cart mule Pull Verses Push Remote and the benefits of
both technologies combined:
PULL
Maximum breaking power when pulling carts
    train like.

Steer with ease with the Cart Mules superior
    turning capabilities.
All units can be customized to move heavier or
    lighter loads.
With the patented tow bar pivot the cart will move
with the unit never causing unnecessary stress to any
part of the cart.
MODEL NUMBER: CM30100-405
MID-SIZE PULL CART MULE
PRICE: $7,617

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

mid size push remote cart mule mid size push remote pull combo cart mule

MODEL NUMBER: PCM6100-405

MODEL NUMBER: P/PM6200-405

MID-SIZE PUSH REMOTE CART MULE
MID-SIZE PUSH REMOTE / PULL
COMBO CART MULE
PRICE: $8,230
PRICE: $8,911
PUSH REMOTE
PUSH REMOTE / PULL COMBO
Any associate may collect cart from the parking
    lot with ease and stay on cart duty with out fatigue.
You may move different size carts at one time.
The user may choose which method is most
    comfortable for them, pushing or pulling .
The Push style Cart Mule® makes the job of cart
    moving fast. Just attach the carts to the front as
    you go.
Any associate may move carts with ease without
    fatigue, thus reducing costs in shifting personal.

The Cart Mule® can reduce workers comp rates,
    medical payments and time-loss due to cart related
    wrist and back injuries.
This unit uses the best of both technologies. The user
may load the carts to both the front and the rear of the
Cart Mule® at the same time.
With the remote control the user stands in front and
may load the cart to the front of the unit as they use
the Cart Mule to push the carts from the rear.

SPECIFICATIONS/FEATURES FOR MODELS: CM30100-405 NON REMOTE/
PCM6100-405/ P/PM6200-405
MECHANICAL SPECIFICATIONS:
STATIC:
SYSTEM DRIVER:
MOTOR U.L., CSA, ISO. with thermal overload
protection, 24 VDC larger type 3/4 HP peak 1.8 HP
motor. Dim. 6.0 length 11.0 35 lbs. 1800 RPM
dynamic braking type per UL 583 further MFG
specifications provided upon request.
DIMENSIONS length...42" width … 28" height…47"
(Less handle and tow bar)
TIRES (1) front .......10" dia. (2) rear.......12" dia.
pneumatic or foam filled tires
REDUCER MGF certificate no 98-1045B ISO
9001:2000, reducer continuous inch lbs 1,375
torque load automatic parking brake single start
40:1 locking type forward & back drive gear reducer
further MGF specifications provided upon request.
WEIGHT 590 lbs.
GROUND CLEARANCE 3.0" tires mounted on sides
for lowest CG (Center of Gravity) to eliminate tip over
of unit.
WORKING LOAD max carts to be pushed or pulled is
45 in normal conditions. The max quantity may be less
depending on parking lot conditions. Push or Pull lbs.
10,000 max.
REAR WHEEL DRIVE chain drive differentials,
with 1" inch drive shaft axel. Complete drive system fully
shielded from environmental hazards by 7 gage (.19)
steel per UL 583.
DUTY CYCLE 13 hours under normal conditions.
Parking lot grade and temperature may affect daily
operating time.
CONSTRUCTION SPECIFICATIONS:
FIBERGLASS outer enclosure, nominal 0.1 inch
thickness. Flame retardant additives, alumina trihydrate,
and dydrated alumina. Enclosure secured to frame by
screws. Fiberglass impact tested, per UL 583.

BRAKING:

BRAKES types; 1) Dynamic braking from motor
2) Static gear reduction braking, automatic parking brake
single start 40:1 locking forward & back drive gear
reducer.

FRAME powder coated all steel 7 gage (.19)
construction. Seven 1/2 inch. (Ventilation holes on each
side to allow possible gas produced during battery
charging to escape. per UL 583) 1/4 inch steel mounting
plate for reducer. 1/8 inch powder coated steel square
tubing for handle.
OPERATING SPECIFICATIONS:
MANUAL OPERATION:
SPEED factory set; forward direction; reverse
direction four button weather resistant key pad secured
to handle assembly. Forward speed button #1 = 1 MPH,
forward button #2 = 2 MPH forward button #3 = 3 MPH,
reverse button #1 = 1 MPH
ELECTRICAL SPECIFICATIONS:
OPERATING VOLTAGE 24 VDC (D.C.)
BATTERIES
(4) large 12 volt deep cycle, sealed gel
type, UL recognized, FAA approved, 86 AMP hour
reserve capacity, @ 20 hour rate, connected for
24 VDC output (each battery weighs 64.0 lbs for
a total of 256 lbs.)
SIGNAL DEVICES FOR REMOTE UNIT: Safety
horn, automatic brake light, beacon strobe light, amber,
100,000 candle power.
FM RADIO SYSTEM FOR REMOTE UNIT: Water
resistant FM remote control transmitter. Automatic self-programming remote transmitter security code-255
possible codes 120 foot operating range minimum
automatic rolling security code forward slow speed
1.0 MPH forward fast speed 3.0 MPH FCC certified.
BATTERY AND CHARGING SYSTEM:
BATTERY CHARGER 16-20 AMP GEL, UL/CSA,
120 VAC 60 Hz, automatic shutdown when batteries
have been fully charged. Recharge time from normal
discharge approximately 8-10 hours.
INDIVIDUAL REMOTE FM RADIO SECURITY
PROGRAMMING
SAFETY FEATURES:
WIRING employed in the assembly of the cart mule is
listed R/C (AVLV2), 8 AWG with 5/64 inch. Thick
insulation for battery and motor circuits and 22 AWG
with 1/32 inch thick insulation for control and signal
circuit wiring tested and complies UL 583.
BEACON STROBE LIGHT 100,00 candle power
LIGHT TOWER ELEVATION AT EYE LEVEL,
includes a, strobe light, break light, diagnostics fault
indicator panel, emergency shut off switch, and warning
horn.
CIRCUIT PROTECTORS three provided R/C
(QVNU2) rated 24 VDC. 1 AMP FPR switch circuit,
5 AMP for strobe light and two 60 AMP for battery
circuit. Tested and complies UL 583.
AUTOMATIC PARKING BRAKE single start 40:1
locking forward & back drive gear reducer
WARNING HORN FOR REMOTE UNIT in manual
and remote
MOTOR UL, CSA, ISO. with thermal overload
protection
AUTOMATIC EMERGENCY stop when release of
forward speed control button manual and remote.
CONTROLLER CE, safety tested medical grade
microprocessor, 110 amp rated 24 VDC, programmable
speed from 0 to 3 MPH self protecting overload shut off,
self protecting low battery shut off. Emergency overload
current limiting, programmed slow acceleration and
deceleration for operator safety, fully programmable
maximum speed limit. Tested per UL 583.
SECURITY SWITCH prevents unauthorized persons
from using the cart mule, and emergency remote shut off
switch on light tower.
DIAGNOSTIC FAULT INDICATOR LOW
BATTERY DISPLAY
panel. Low battery, bad
connection to motor, motor has sort circuit to battery
connection, controller fault, and excessive voltage to
controller caused by poor connection to batteries. Tested
per UL 583.
ADDITIONAL FEATURES:
WEATHER the "Cart Mule" works well in the rain or
snow. (Special tires recommended for use in snow or ice).
Provided with a UL safety tested product, OSHA
compliant operators training program with course
materials and safety test.
Cart Mule, Cart Mules, Cart Pusher, Cart Pushers, Cart Tow, Cart Tows, Power Pusher, Power Pushers, Power Tug, Powered
Pusher, Mule, Powered Pushers, Tow Cart, and Tow Carts from your complete source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart