Little Giant 300 Ladder Systems

ENGINEERED STEEL PRODUCTS

Priced Full Line Products Catalog

PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679

Back to Product Category

LITTLE GIANT 300 LADDER SYSTEMS TYPE 1A



FREE FREIGHT FOR ALL MODELS ON THIS PAGE

Now there's a ladder as versatile and hard working as you. You want safety. You want strength. And of course you want versatility. That's why millions worldwide have chosen the Little Giant Ladder System.®			Safety The Little Giant is designed to be the safest ladder on the planet. Since it's adjustable, the Little Giant can be used safely on stairs, ramps, curbs, docks or other uneven surfaces. And, with the new patented triple- locking hinge, the Little Giant Ladder is sturdier than ever in the extended position.

The Original Multi-Purpose Ladders™ Little Giant is the world's finest ladder, combining the strengths of traditional A-frame ladders, extension ladders, stepladders and even scaffolding, all in one convenient package. Receive a free accessory with your purchase of this ladder.

			Strength The Little Giant is made of heavy-wall, 6005-T5 aluminum, the very same material used in aerospace construction. So it's ultra-strong while remaining light and portable. In fact, The Little Giant Type 1A is government-rated to hold up to 300 pounds, but has survived brutal stress testing of up to 1200 pounds with absolutely no structural failure.

Little Giant Type 1A Features: * NEW: Patented Triple-Locking Hinges™ * NEW: Tip & Glide Wheels™ with models 17, 22 and 26 * Heavy-wall aircraft-grade aluminum construction * Rated to hold up to 300 lbs. * Combines 24 different ladders into one convenient ladder system * Lightweight and portable * Complies with all applicable OSHA & ANSI A14.2 standards * Includes a full Lifetime Warrant

			Versatility No other ladder gives you the versatility of a Little Giant. Independent tests prove the Little Giant will replace 60-70% of all portable ladders currently being manufactured. When you buy a Little Giant, you're not just getting one ladder. You're getting 24 different ladders com- bined to make the world's most versatile ladder system. Plus, the addition of easy roll wheels makes your Little Giant easy to maneuver and store.

Little Giant Ladder Configurations:


	A-Frame Ladder With a simple click of the patented hinge, the Little Giant can be used as a traditional A-Frame ladder.


A-Frame Ladder	Staircase Ladder Because it's adjustable in one-foot increments, the Little Giant allows one side of the ladder to be extended allowing safe use on uneven surfaces like staircases, curbs or docks.


		Staircase Ladder
	90° Ladder Traditional ladders make working close to walls nearly impossible. With the Little Giant, one adjustment allows you to safely work against any vertical surface.

90° Ladder	Extension Ladder For large projects the Little Giant easily converts to a stable extension ladder allowing you to reach rooftops, tree limbs and more with ease.


	Scaffolding Since the Little Giant pulls apart to form two scaffold trestles, you just add the Little Giant work plank (sold separately) to form a convenient scaffolding system.	Extension Ladder


Scaffolding

Specifications - 300 lbs. Rated - Lifetime Warranty

Model #	Description	Stepladder Height	Extension Height	Scaffolding Height	Storage Height	Weight
10101	Model 13	3'-5'	7'-11'	3'	3' 7"	26 lbs
10102	Model 17	4'-7'	9'-15'	4'	4' 7"	35 lbs
10103	Model 22	5'-9'	11'-19'	5'	5' 7"	42 lbs
10126	Model 26	6'-11'	13'-23'	6'	6' 7"	54 lbs

Accessories

Leg Leveler
Model No. - 10106

WingSpan Wall Stand Off
Model No. - 10111

Work Platform
Model No. - 10104
300 lbs Rated

Tip & Glide Wheel Kit
Model No. - 10940
Not available for #10101

Telescoping Plank (250 lbs Rated)
Model No. - 10069 - 9' (6' to 9')
Model No. - 10813 - 13' (8' to 13')
Model No. - 11016 - 16' (10' to 16')

Ladder Rack
Model No. - 15005
75 lbs Rated

Ladder Lock
Model No. - 15003
Lifetime Warranty 6' long
5/8" Diameter


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

PRICES FOR 300 LADDERS

Model No.	Description	Weight	Prices
10101LG	13' Boxed	32 lbs	$429.82
10102LG	17' Boxed	41 lbs	$478.95
10102LGW	17' Boxed/Work Platform	49 lbs	$496.48
10103LG	22' Boxed	55 lbs	$514.03
10103LGW	22' Boxed/Work Platform	63 lbs	$531.58
10126LG	26' Boxed	66 lbs	$575.43
10126LGW	26' Boxed/Work Platform	74 lbs	$592.98

PRICES FOR LADDER ACCESSORIES

Model No.	Description	Weight (lbs)	Prices
10104	Work Platform	8	$49.98
10106	Leg Leveler	5	$49.98
10111	Wing Span Wall Stand Off	10	$49.98
10940	Tip & Glide Wheel Kit	2	$38.32
15005	Ladder Rack	8	$34.98
15003	Ladder Lock	8	$25.00
10069	6' - 9' Work Plank	35	$208.75
10813	8' - 13' Work Plank	48	$245.48
11016	10' - 16.5' Work Plank	59	$294.72

Operating Instructions for Little Giant Ladder System®

A. The Hinge - located at the top of the ladder when it is in storage position, permits you to alter the shape of the ladder.
The hinge locks in the following positions (See Figures A-1, A-2, and A-3).

Figure A-1

Figure A-2

Figure A-3

1. Unlock the hinge by pushing straight in on the Palm Button until it stays in the open (unlocked) position on both
hinges (See Figures A-4 and A-5).

Figure A-4
LOCKED

Figure A-5
UNLOCKED

Hinge

a. NOTE - If there is pressure on hinge lock pins it will be difficult to unlock the hinge. To relieve pressure,
simply adjust one half of the ladder back and forth until hinge lock pins move without force.

b. NOTE - DO NOT FORCE HINGE LOCK in or out with any tools as it will cause permanent damage to
the hinge mechanism. It should never require more than light pressure to unlock the hinge if the holes are
properly aligned.

2. You may now open the ladder to the A-frame position by pulling the two ladder halves apart until both hinge lock
pins snap into the A-frame locked position.

3. Now place the ladder into the extension position by again pushing straight in on the palm buttons of both hinges
(See Figures A-4 and A-5).

Rotate either side of the ladder until the hinge locks snap into their locked position.

To restore the ladder to the storage position, reverse the above procedure. The hinge lock will lock automatically at
the A-frame configuration to prevent damage to the ladder or injury to the user.

Use caution and do not let the full weight of the ladder fall on the hinge lock as the ladder folds from extension to
A-frame configuration. Disengage the hinge locks in the A-frame position and return the ladder to its storage position.

B. The Lock Tab Assemblies- The second mechanical component of the ladder system is the LOCK TAB
ASSEMBLY. There are four of these on each ladder. These permit you to change the height of the ladder (See
figure B-1 and C-1).

Figure B-1

Figure C-1

Figure C-2

C. Adjusting the height of the ladder for use in the A-frame position.

1. Unlock both hinge locks (See figures A-4 & A-5).
2. With the ladder in the storage position and while holding the inner ladder assembly firmly in place, pull the four
Lock Tab Assemblies out of the rung holes of the inner ladder and rest them on the side of the outer ladder rail
(See figures C-1).
3. Raise the inner ladder up to the desired height.
4. At the desired height align the outer holes with the nearest rung hole of the inner ladder assembly.

5. Holding the inner and outer ladder at the aligned height with one hand, reinsert the opposite Lock Tab Assemblies
into the rung holes with the other hand.
6. Alternate hands and perform the same operation with the other Lock Tab Assemblies (See figure C-2).

7. Open the ladder to the A-frame configuration by pulling the ladder halves apart until the hinges lock into place
(See figure A-2 and A-4).
8. To return the ladder to the storage position, reverse the procedures and position as seen in Figure A-1.

D. Adjusting the height of the ladder in its extension ladder position.

1. From its stored position, unlock hinge (as indicated in figures A-4 & A-5)
and rotate to extension position until both hinges lock into place.

NOTE: Hinge will first lock in A-frame position, repeat unlocking hinge to
rotate its extension position.

Figure D-1

2. If equipped with wheels, wheels must be at the top of the ladder while
in the extension position. Unlock Lock Tab Assemblies on upper half of
the ladder. Grasp the outer ladder, walk backward, allowing the ladder
to telescope to the desired height. If more height is desired, extend the
lower half of the ladder (see figure D-1).

Figure D-1A

3. To store the ladder from its extension position, reverse
the above sequence starting with the lower half of the
ladder.

E. Staircase Position.

1. Adjust ladder to desired height (review section
concerning adjusting the height of the ladder for use in the
A-frame position.) If equipped with wheels, the wheels
should be placed on the bottom of the long side, not against
the stairs.

Figure E-1

2. Then adjust the side desired for proper alignment to fit the
staircase (see figure E-1).

F. Scaffolding Trestle Operating Instructions

1. Pull the inner ladder assembly completely out of the outer
ladder bases (see figure F-1).

2. Open the inner ladder assembly to the A-frame position until
both hinges lock (See figures A-4 and A-5). This is the first of
two trestles needed for the scaffolding function (see figure F-2).

3. Grasp both outer ladder bases (see figure F-3).

4. If equipped with wheels, turn ladder without wheels 180º and
insert lock assemblies of that base into the adjacent holes of the
opposite outer base (see figure F-4). Wheels should be facing out
(see figure F-5).

Figure F-1

Figure F-2

5. Grasp the outer ladder base with the unused lock assemblies
and lower 1/2 inch, then spread the opposite outer ladder base to
form a second A-frame trestle (see figure F-5 and F-5 Close).

6. Rotate forked ears on work platform to position indicated in
figure F-6.

7. Insert work platform between outer ladder bases on the third
rung down of each base. The wire-formed end of the work
platform should surround the outer rung turned to the inside of the
outer ladder A-frame trestle (see figure F-7).

Figure F-3

Figure F-4

Figure F-5 Close

Doing this step
incorrectly may cause
damage to ladder.

Figure F-6

Wheels should not be
on inside of trestle

Figure F-7

Figure F-5

Figure F-8

Figure F-9

8. Press down on top of work platform until it locks in a horizontal position. Outer ladder A-frame trestle is now ready
for use as second trestle (see figure F-8).

9. Space the two trestles and place an appropriate scaffolding plank on the set of rungs at the desired working height
(see figure F-9).

G. Work Platform Operating Instructions

1. Tighten or loosen bolts until brackets move stiffly (see figure G-1).

2. Adjust to fit ladder rung (see figure G-2).

3. Place platform at desired height (see figure G-3).

4. Push platform forward and step up through the rung above platform (see figure G-4).

Figure G-1

Figure G-2

5. Push platform back with toe (see figure G-5) until the forward tip of the platform rests against the rung.

6. Check to ensure platform is securely in place before putting full weight on it (see figure G-6).

7. When through, step to rung above work platform and push work platform forward with toe. Step down through
work platform (see figure G-7).

8. The above instructions apply to the A-frame ladder also. The platform may also be used as a utility shelf
(see figure G-8).

Figure G-3

Figure G-4

Figure G-5

Figure G-6

Figure G-7

Figure G-8

Figure H-1

H. Wheels

1. Hold ladder with wheels towards you. Tip ladder onto wheels. Hold the top
rung and pull the ladder behind you.

Figure H-2

Little Giant 300 Ladder Systems, Type 1A, Aluminum Step Ladder, Extension Ladder, Tip & Glide Wheels, Free Freight, Aluminum,
Combines 24 Different Ladders into one, A-Frame Ladder, Staircase Ladder, 90 Degree Ladder, Extension Ladder, Scaffolding,
Telescoping Plank, Ladder Rack, and Ladder Lock from your source for material handling equipment.

Back to Product Category

Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart

LITTLE GIANT 300 LADDER SYSTEMS TYPE 1A

LITTLE GIANT 300 LADDER SYSTEMS
TYPE 1A