FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

MODEL RB

HORIZONTAL BELT CONVEYOR
(ROLLER BED)

horizontal belt conveyor
The Model RB is designed to move
heavier loads. Roller bed design
reduces belt friction and provides
greater capacity. Applications include:
assembly, inspection and packing
operations.
• 15 Belt Widths
• Reversible
• Moves Heavier Loads
• Center Drive
• System Ends
• Pop-Out Roller
• Adjustable MS-Type Floor
    Supports Available

belt conveyor
horizontal conveyor

STANDARD SPECIFICATIONS
BELT - Ultimate 140 BBS-Nitrile. RETURN IDLER - Adjustable 1.9 in. dia. pre-
lubricated ball bearings.
BED - Roller bed with 1.9 in. dia. roller x 16 ga.
galvanized tube spaced every 6 in. Mounted in 6-1/2 in.
x 12 ga. powder painted formed steel channel frame
bolted together with splice plates.
TAKE-UP - Take-ups in center drive provides 16 in.
of belt take-up.
BEARINGS - Sealed, pre-lubricated, self-aligning,
ball bearings on drive and tail pulleys. Pre-lubricated
ball bearings in tread rollers.
CROSS BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section, 30 ft. bed
lengths and over.
SPEED REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley.
MOTOR - 1/2 hp-208/230/460/575V-3 Ph.-60 Hz.
Totally Enclosed C-Face.
CENTER DRIVE - Minimum elevation - 17-3/4 in.
Can be placed on any section of conveyor length.
Minimum OAL without modification 120 in. Chain
guard located on left hand side.
BELT SPEED - Constant 65 FPM.
CAPACITY - Maximum load per linear foot of
conveyor 225 lbs. NOT TO EXCEED capacity in
chart.
DRIVE PULLEY - 8 in. dia. with 1-7/16 in. dia.
shaft at bearings, machine crowned and fully lagged.
FLOOR SUPPORTS - Now supplied as optional
equipment.
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at
bearings or 6 in. dia. with 1-3/16 in. dia. shaft at
bearings, machine crowned. See chart below.
SNUB IDLER - Adjustable 2-1/8 in. dia. pre-
lubricated ball bearings. Guards included.
 8" DIA. DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY @65 FPM
HP BELT WIDTHS TO LENGTHS UP TO
52' 102'
 DISTRIBUTED LOAD (LBS.)



1/2
14" 2490 2150
24" 2280 1800
36" 1860 1170
48" 1520 620
54" 1300 350



1
14" 5500 5160
24" 5290 4810
36" 4870 4180
48" 4530 3630
54" 4000 3200



2
14" 11520 11170
24" 11320 10830
36" 10890 10200
48" 10550 9650
54" 10000 9200
OPTIONAL EQUIPMENT
* BELT - White Polymate 100 RMP-COS
(cover one side), Black Trackmate 533 COS
PVC, Tan Glidetop.
* ROLLER CENTERS - Tread rollers spaced on
3 in., 9 in., or 12 in. centers.
PULLEYS - 6 in. dia. tail with 1-3/16 in. dia. shaft at
bearings in place of 4 in. when not furnished as standard.
* BELT SPEED - Other constant and variable speeds.
V-belt drive supplied on speeds under 17 FPM.
FLOOR SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended above
MS-6 support.
END DRIVE - 8 in. end drive mounted on end of unit.
Requires underside take-up.
LOW ELEVATION SIDE MOUNTED CENTER
DRIVE
- Motor reducer unit mounted to side of
conveyor. Minimum 16 in.
V-BELT DRIVE - V-Belt supplied between motor
and reducer. Allow 65 in.
POLY-TIER SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied.
O-RING DRIVE CHAIN-With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication).
CEILING HANGERS - 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and
galvanized rods available.
UNDERSIDE TAKE-UP - Provides 16 in. of belt
take-up. Extends down 15-7/8 in. from top of belt.
MOTORS - Energy efficient, single phase, brake
motors, other characteristics. 2 HP maximum.
GUARD RAILS–Adjustable Universal Channel Guard
Rail, fixed channel, type A & B angle. Fixed Channel
overlapping, one direction. Fixed Channel nonover-
lapping, reversing. See Accessory section below.
ELECTRICAL CONTROLS - Non-reversing or
reversible magnetic starter, and push-button stations.
AC variable frequency drive.
* NOTE: Capacity affected with these options.
PRICES FOR COMPLETE CONVEYOR INCLUDE:
Center Drive, Located on Left Hand Side of Conveyor
   When Standing at Infeed Looking at Discharge
    (Specify Exact Locations)
1/2 HP - "C" Face Totally Enclosed Motor
   (Specify Exact Voltage)
Totally Enclosed Chain Guard
Black Ultimate 140 BBS Belt 65 FPM Belt Speed
1.9" Dia. x 16 Ga. Galvanized Roller (Rollers on 6"
   Centers) in a 6-1/2" x 12 Ga. Channel Frame
Less Electrical Controls

Less Floor Supports

"C" Face Speed Reducer - Sealed Worm Gear

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


SIZE TO
ORDER
Overall
Length
"A" 4" Dia.
Pulley
BED
LENGTH
"L"
Belt Widths SIZE TO
ORDER
Overall
Length
"A" 6" Dia.
Pulley
Belt Widths
12" 18"
24"
30"
36"
Between Rail Widths Between Rail Widths
15" 21"
27'
33"
39"
Overall Frame Widths Overall Frame Widths
18" 24"
30"
36"
42"
12' 10'
12'
17' 15'
17'
22' 20'
22'
27' 25'
27'
32' 30'
32'
37' 35'
37'
42' 40'
42'
47' 45'
47'
52' 50'
52'
57' 55'
57'
62' 60'
62'
67' 65'
67'
72' 70'
72'
77' 75'
77'
82' 80'
82'
87' 85'
87'
92' 90'
92'
97' 95'
97'
102' 100'
102'
Price Per Foot
Price Per Foot
IMPORTANT NOTES
• OTHER LENGTHS • NON-STANDARD WIDTHS
  Other lengths not listed in price chart are available.
For lengths longer than 102', use per foot price as an
add-on. For lengths shorter than 12', user per foot price
as a deduct. (Belt tracking issues may occur on lengths
shorter than 12').
  Contact us for lead time.
• INTERMEDIATE BEDS
  Use per foot price of width x required length, supports
not included.
• FLOOR SUPPORTS
• OTHER WIDTHS   Floor Supports are not included in base price. There
are two (2) stationary floor supports required for the
first bed section and one (1) support required per bed
section thereafter.
  For "IN-BETWEEN WIDTHS", use next width plus
10%. For widths over 60" OAW, contact us.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL BELTS
Extra Price PER FOOT Conveyor Length "A" (in addition to Black Ultimate 140 BBS Belt regularly furnished).
See chart.
Belt Description 

BELT
WIDTH
Prices Per Foot of Conveyor Length "A"
 Prices Per Foot of Conveyor Length "A"
Trackmate
533 COS-PVC
(Black)
Polymate
100 RMP-COS
(White)
Trackmate
120 Roughtop
with PVC Cover
(Black)
Tan
Glidetop
High Grip
Longitudinally
Grooved Belt
10"
12"
14"
16"
18"
20"
22"
24"
28"
30"
34"
36"
42"
48"
54" $7.77 $47.62 $38.41 $220.78 $38.41

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


MOTORS
Extra motor price for OTHER THAN: 1/2 HP-208/230/460/575V-3 Ph.-60 Hz.-Totally Enclosed. Speed affects
horsepower requirements.
*Note: "High Cycle Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices
Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs.
**Note: "High Cycle Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and
Timing Belt Drive.
Note: SSB and D Series are Holding Brakes and are NOT rated for cycling.
H.P.
REQ.
TOTALLY ENCLOSED 
ENERGY EFFICIENT
BRAKEMOTORS 
200/208/230/
460/575V
3 Ph.-60 Hz.
115/230V
1 Ph.-60 Hz.
230/460V
3 Ph.-60 Hz.
575V 3 Ph.-60 Hz. Holding Brake
208/230/
460/575V
3 Ph.-60Hz.
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz.
Cycling Brake 208/230/
460/575V
*
3 Ph.-60Hz.
Holding Brake
115/230V
1 Ph.-60Hz.
1/2 N/C
N/A
N/A
N/A
N/A
1 N/A
2 N/A
*575V - Prices coded in light blue call for lead time.

FLOOR SUPPORTS
CEILING HANGERS
Not Included in Base Price. Use Chart Below for
Required Elevation.
ceiling hangers for conveyors
"MS" SUPPORT
Model No. Adjustment to Top of Belt Price Each
*MS-1 13-7/8" to 15-7/8"
*MS-1.2 14-7/8" to 16-5/8"
*MS-1.4 15-7/8" to 17-5/8"
*MS-2 16-7/8" to 19-7/8"
MS-3 19-1/2" to 22-1/2"
MS-4 22-1/2" to 28-1/2"
MS-5 26-1/2" to 32-1/2"
MS-6 30-1/2" to 42-1/2"
MS-7 40-1/2" to 52-1/2"
MS-8 52-1/2" to 54-1/2"
MS-9 54-1/2" to 76-1/2"
MS-10 76-1/2" to 88-1/2"
MS-11 86-1/2" to 98-1/2"
MS-12 98-1/2" to 110-1/2"

Ceiling Hanger Brackets with (2) 5/8” dia.
x 8’-0” long unplated fully threaded rods......

$147.90
Ceiling Hanger Brackets with (2) 5/8” dia.
x 8’-0” long galvanized fully threaded rods....
$176.60
Ceiling Hanger Brackets with (2) 5/8” dia.
x 10’-0” long unplated fully threaded rods.....
$218.40
Ceiling Hanger Brackets with (2) 5/8” dia.
x 10’-0” long galvanized fully threaded rods....
$359.60
Ceiling Hanger Brackets with (2) 5/8” dia.
x 12’-0” long unplated fully threaded rods.....
$362.60
Ceiling Hanger Brackets with (2) 5/8” dia.
x 12’-0” long galvanized fully threaded rods....
$419.40
Ceiling Hanger Brackets, Less Rods Only.... $93.10
Extra Length Rods:
(2) 8’-0” long x 5/8” dia. unplated fully
threaded rods ............................................
$54.20
*Knee Braces ...................... Per pair ......... $30.00
(2) 8’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................
  *Less than 17 3/4" top of belt elevation-Side Mounted Center
Drive Required (With 8" dia. Drive Pulley).
Note:
MS-7 to MS-12: Knee Braces included in price.
$83.40
(2) 10’-0” long x 5/8” dia. unplated fully
threaded rods ..............................................
$125.20
(2) 10’-0” long x 5/8” dia. galvanized fully
threaded rods ..............................................
$266.30
(2) 12’-0” long x 5/8” dia. unplated fully
threaded rods ..............................................
$269.60
(2) 12’-0” long x 5/8” dia. galvanized fully
threaded rods ..............................................
$326.50
Hex Coupling Nuts for Rods ................... $4.90
POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
   conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CASTERS LARGER TAIL PULLEY
Are available in either Rigid or Swivel type—Specify. 6" dia.Tail Pulley in place of 4" dia. when
not furnished as standard.............................
  4" Dia. 6" Dia.
CASTERS Steel Rubber Steel Rubber
Extra Per Support*
$360.10
CONSTANT AND VARIABLE SPEEDS
Constant C-Face--Within 17-135 FPM... No Charge
* Price Includes Knee Braces
NOTE: Casters for HS Supports, contact us.
Constant V-Belt--Minimum of 4 FPM..............
...........................................Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above...........
............................................................Contact us.
Brakes for Casters (Add-On Per Support)*:
4” Dia. Caster ...............................................$39.20
6” Dia. Caster ...............................................$125.20
Variable Speed...See AC Variable Speed Drives
Section below
*Available on swivel casters only.
DRIVE COMPONENT DEDUCTS
UNDERSIDE TAKE-UP
Less Motor Drive, Motor Mount and Guards,
Provides 16" of Belt Take-Up on Long Units.
but with Shaft Extension...Deduct................ $777.20
Bed Widths Price
16" to 28"
30" to 42"
48"
56" to 60"
Less Motor Only (1/2 HP-208/230/460/575V-
3Ph.-60 Hz.).............Deduct.................... $258.30
*Less Reducer......Deduct........................    $307.40
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
Required on units over 100'. Contact us with application.
ELECTRICAL CONTROLS
(See bottom of page)
GALVANIZING
Contact us GUARD RAILS
NOTE: Available in 5’ and 10’ lengths only.
Contact us for other lengths.
BAG FLATTENER
Mounting Assembly Only
Adjusted Universal Channel Guard Rail
16 in.-28 in. OAW .................................... $2,521.25
Both Sides............................per foot......... $15.10
30 in.-42 in. OAW .................................... $3,576.90
One Sides.............................per foot......... $7.80
Above 42 in. OAW ....................... Contact us
Angle Type
NOTE: Roller Bed Only. Upper and lower bed
sections priced separately. Top unit: 5' bed RB
with 4" dia. drive and tail pulley with round ends.
(Price as standard RB.) Lower unit: 10' bed RB.
Type "A" or "B" available (Specify).
Prices are for Both Sides.
Type "A"
1-1/2" x 1-1/2" x 12 Ga.........per foot........
$7.80
OPTIONAL DRIVES
Type "B"
1-1/2" x 1-1/2" x 12 Ga........per foot.........
Unified Drives: (Shaft Mounted)
$10.90
Unified Drives: OVERALL FRAME WIDTH
16"
to 28"
30"
to 42"
48" 54"
to 58"
Center Drive 8”
Drive Pulley with
075 Reducer
Center Drive 8”
Drive Pulley with
090 Reducer
Fixed Channel Type
Prices are for Both Sides.
3-1/2" x 1-1/2" x 12 Ga........per foot.........
$22.50
6-1/2" x 1-1/2" x 12 Ga........per foot......... $27.10
10-1/2" x 1-1/2" x 12 Ga......per foot......... $38.30
13-1/2" x 1-1/2" x 12 Ga......per foot......... $46.10
8” Drive Pulley
Speed FPM
65
78
97
130
156
195
260
389
Max HP
1
1.2*
1
2
2
2
2
2**
* Reducer size increases with 2 HP.
**Contact us.
OPTIONAL DRIVES
Drive Type
OVERALL FRAME WIDTH
18" to 24"
30" to 42"
Center Drive (V-Belt)
Low Elevation Side Mounted Center (C-Face)
Low Elevation Side Mounted Center (V-Belt)
Center Drive with Extended Take-Up C-Face
Center Drive with Extended Take-Up V-Belt
High Performance Center Drive (C-Face)
Heavy Duty Center Drive (C-Face)
End Drive With Underside Takeup (C-Face)
N/C
N/C
End Drive With Underside Takeup (V-Belt)
Side Mounted End C-Face With Underside Take-Up
Side Mounted End V-Belt With Underside Take-Up
#50 O-Ring Drive Chain............................Add...........................$284.40
#60 O-Ring Drive Chain............................Add...........................$406.00

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $213.01 #033.2032 & #033.2072..................$555.67
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$332.11
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$118.10

AIR PRESSURE SWITCH
#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$696.08
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.44 per / ft.
                  both sides..............$15.87per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,491.84 $1,189.37
1 VSC-12-11 VSC-12-13
Price $1,724.27
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
$675.20 When AC Variable Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $542.68 for this option.)
Brake Relay Kit (EA-068A).............................. $542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,058.00
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)
$675.20
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1516.60
$2,023.30
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$1,182.40
$2,023.30
$1,435.60
$2,023.30
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $242.09 EA-000002....................................... $242.09
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $440.67
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $440.67
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$211.23 033.195................................................. $142.50
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $397.05 033.196.................................................. $490.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $397.05
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$3,210.68
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket.
$3,253.63
$3,391.27
Add on $192.70 for the above Push Buttons
  to be Mounted.
Add on $995.10 for the above Starters and
  Push Button Stations to be Mounted and Wired.
  Supply 20'0" of cable for push button only.
• Mounting Brackets for photo eye
#033.2122
B-05165 ..............................................
$118.10

CONVEYOR WEIGHT TABLES
SIZE TO
ORDER
Overall Length
"A" 4" Dia.
Pulley
Bed
Length
"L"
Between Rail Wdith 13" 15" 17" 19" 21" 23" 25"
SIZE TO
ORDER
Overall Length
"A" 6"Dia.
Pulley
27" 31" 33" 37" 39" 45" 51" 54"
Belt Width 10" 12" 14" 16" 18" 20" 22" 24" 28" 30" 34" 36" 42" 48" 57"
Overall Frame
Wdith
16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42" 48" 54" 60"
12' 10'

Weights
(Lbs.)

561 593 625 657 689 721 753 12' 791 865 940 1014 1088 1162 1237 1312
17' 15' 660 696 732 768 804 840 876 17' 919 1002 1085 1167 1250 1333 1415 1497
22' 20' 760 800 840 880 920 960 1000 22' 1047 1138 1230 1321 1412 1503 1594 1682
27' 25' 859 903 947 991 1035 1079 1123 27' 1175 1275 1375 1474 1574 1673 1773 1867
32' 30' 959 1007 1054 1102 1150 1198 1246 32' 1304 1412 1520 1627 1735 1844 1952 2052
37' 35' 1058 1110 1162 1214 1266 1317 1369 37' 1432 1548 1665 1781 1897 2014 2130 2237
42' 40' 1158 1213 1269 1325 1381 1437 1492 42' 1560 1685 1810 1934 2059 2184 2309 2422
47' 45' 1257 1317 1377 1436 1496 1556 1616 47' 1688 1821 1955 2088 2221 2355 2488 2607
52' 50' 1357 1420 1484 1548 1612 1675 1739 52' 1816 1958 2100 2241 2383 2525 2667 2792
57' 55' 1456 1524 1592 1659 1727 1794 1862 57' 1944 2094 2245 2395 2545 2695 2845 2977
62' 60' 1556 1627 1699 1771 1842 1914 1985 62' 2072 2231 2390 2548 2707 2865 3024 3162
67' 65' 1655 1731 1806 1882 1957 2033 2109 67' 2200 2367 2535 2702 2869 3036 3203 3347
72' 70' 1755 1834 1914 1993 2073 2152 2232 72' 2328 2504 2680 2855 3031 3206 3382 3532
77' 75' 1854 1938 2021 2105 2188 2272 2355 77' 2456 2640 2825 3009 3193 3376 3560 3717
82' 80' 1954 2041 2129 2216 2303 2391 2478 82' 2585 2777 2970 3162 3354 3547 3739 3902
87' 85' 2053 2145 2236 2327 2419 2510 2601 87' 2713 2914 3115 3315 3516 3717 3918 4087
92' 90' 2153 2248 2343 2439 2534 2629 2725 92' 2841 3050 3260 3469 3678 3887 4097 4272
97' 95' 2252 2352 2451 2550 2649 2749 2848 97' 2969 3187 3405 3622 3840 4058 4275 4457
102' 100' 2352 2455 2558 2662 2765 2868 2971 102' 3097 3323 3550 3776 4002 4228 4454 4642
All weights are conveyor weights only. Accessories, crating, etc., are not included.

Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Roller Bed, Conveyors, and Slider Bed from your source for material
handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart