FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

MODEL PCA

LIGHT DUTY PORTABLE PARTS CONVEYOR

light duty portable parts conveyor
The Model “PCA” Conveyor is easily positioned
in or under punch presses, plastic injection
molding machines, extruding equipment, and
other machinery, where small steel or aluminum
stampings, plastic parts, etc., must be quickly
conveyed to hoppers or drums to keep production
on the move.
6 Belt Widths
Reversible
Overhead Drive
One Piece Troughed Bed
Adjustable PCAS Type Floor Supports
    Available

paortable parts conveyors
parts conveyors

STANDARD SPECIFICATIONS
OVERHEAD END DRIVE–Located on discharge
end of conveyor. Chain guard located on left hand side.
BEARINGS–Sealed, pre-lubricated ball bearings on
drive pulley.
BELT–Black Ultimate 140 SD. Clipper lacing. SPEED REDUCTION–Sealed worm gear “C” face
speed reducer. No. 40 roller chain to drive pulley.
BED–12 ga. steel formed troughed bed section with
1 in. high vertical sides.
MOTOR– 1/2 HP–230/460V–3 Ph. 60 Hz. Totally
Enclosed Fan Cooled “C” face.
DRIVE PULLEY–2-1/2 in. dia. with 1 in. dia. shaft,
crowned and fully lagged.
BELT SPEED–Constant 65 FPM.
TAIL PULLEY–2-1/8 in. dia. With 7/16 in. dia.
threaded shaft. Pre-lubricated ball bearings.
CAPACITY–Maximum load per linear foot of
conveyor 10 lbs.
RETURN IDLER–Adjustable 1-3/8 in. dia. pre-
lubricated ball bearings.
TAKE-UP–Screw take-ups are provided at drive
pulley to insure proper belt tension.

OPTIONAL EQUIPMENT
FLOOR SUPPORTS–PCAS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every
bed joint and ends of conveyor. Holes in feet for lagging
to floor. Knee braces recommended above PCAS-6
support.
BED–Higher than 1 in. high vertical sides.

UNDERSIDE DRIVE–Gearhead motor mounted
underneath bed section.

MOTORS–Energy efficient, single phase, other
characteristics. 1/2 HP maximum.
ELECTRICAL CONTROLS–Manual one direction
push button switch, one direction magnetic starters, push
button stations, power cord.
BELT–White Polymate 100 RPM COS.
BELT SPEED–Other constant speeds 11 to 82 FPM,
specify.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR COMPLETE CONVEYOR INCLUDE:
Black Ultimate 140 SD Belt 1/2 HP-230/460V-3 Ph.-60 Hz. Totally Enclosed "C"
    Face (Specify Exact Voltage)
12 Ga. Steel Formed Troughed Bed Section with 1"
    High Vertical Sides
65 FPM Constant Belt Speed
Totally Enclosed Chain Guard Less Electrical Controls
SIZE TO ORDER
Overall
Length "A"
Belt Width 4" 6" 8" 10" 12" 18"
Bed Width 4 1/2" 6 1/2" 8 1/2" 10 1/2" 12 1/2" 18 1/2"
"B" 9 1/8" 11 1/8" 13 1/8" 15 1/8" 17 1/8" 23 1/8"
4' Weights
(Lbs.)
96 107 116 125 134 162
5' 100 114 124 128 146 178
6' 106 121 133 145 158 196
8' 116 139 150 165 181 228
10' 126 146 166 186 205 262
Price - 4' Overall Length
Per Foot Price
NOTE: Available in 2 weeks on 4'-0", 5'-0", 6'-0", 8'-0", and 10'-0" lengths only.
Lengths other than those listed, contact us for lead time.
IMPORTANT NOTES...
OTHER LENGTHS
  For longer than 4' overall length, add extra per foot to base price. Minimum length is 4'. Maximum length is 20'.
OTHER WIDTHS
  For "IN-BETWEEN WIDTHS", use next width plus 10%. For widths up to 20-1/2" OAW, interpolate plus 10%.
For widths over 20-1/2" OAW, contact us.
NON-STANDARD WIDTHS
  Contact us for lead time.

OPTIONAL EQUIPMENT
OPTIONAL BELTS DRIVE COMPONENT DEDUCTS
White Polymate 100 RMP-COS Belt
(Must order Lacing with Belt)
Less Motor and Reducer, but with Drive Shaft
Extension ............Deduct ............... $455.10
Less Motor Only (1/2 HP-208/230/460V-3 pH
Belt
Width
Belt
Price Per Foot
4"
6"
8"
10"
12"
18"
60Hz.)...................Deduct .............. $258.40
ELECTRICAL CONTROLS
(See below)
GALVANIZING
Contact us
OPTIONAL DRIVES
Underside Mounted Drive in place of Standard
Overhead Drive .................Add ..................... $552.90
1/2 HP/115/230V-1 Ph.-60Hz. Motor
In lieu of 3 Ph ................................................ $39.30
2" HIGH SIDES
Both Sides ......................per foot ................. $8.10
One Side ........................per foot ..................$4.10

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


FLOOR SUPPORTS
"PCA" SUPPORT WITH
OVERHEAD DRIVE
"PCA" SUPPORT WITH
UNDERSIDE DRIVE
Model No. Adjustment to Top of Belt Price Each
PCAS-01 9" to 10-3/4"
PCAS-01.2 10" to 11-3/4"
PCAS-01.4 11" to 12-3/4"
PCAS-02 12" to 15"
PCAS-03 14-1/2" to 17-1/2"
PCAS-04 17-1/2" to 23-1/2"
PCAS-05 21-1/2" to 27-1/2"
PCAS-06 25-1/2" to 37-1/2"
PCAS-07 35-1/2" to 47-1/2"
PCAS-08* 47-1/2" to 59-1/2"
PCAS-09* 59-1/2" to 71-1/2"
PCAS-10* 71-1/2" to 83-1/2"
PCAS-11* 81-1/2" to 93-1/2"
PCAS-12* 93-1/2" to 105-1/2"
Model No. Adjustment to Top of Belt Price Each
PCASU-04 17-1/2" to 23-1/2"
PCASU-05 21-1/2" to 27-1/2"
PCASU-06 25-1/2" to 37-1/2"
PCASU-07 35-1/2" to 47-1/2"
PCASU-08 47-1/2" to 59-1/2"
PCASU-09 59-1/2" to 71-1/2"
PCASU-10 71-1/2" to 83-1/2"
PCASU-11 81-1/2" to 93-1/2"
PCASU-12 93-1/2" to 105-1/2"
We Recommend additional bracing on narrow widths
Knee Braces ...................Add per pair ..............$30.00
NOTE: PCAS-7 to PCAS-12 AND PCASU-7 to
PCASU-12: Knee Braces included in price.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $213.01 #033.2032 & #033.2072..................$555.67
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$332.11
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$118.10

AIR PRESSURE SWITCH
#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$696.08
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.44 per / ft.
                  both sides..............$15.87per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,491.84 $1,189.37
1 VSC-12-11 VSC-12-13
Price $1,724.27
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
$675.20 When AC Variable Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $542.68 for this option.)
Brake Relay Kit (EA-068A).............................. $542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,058.00
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)
$675.20
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1516.60
$2,023.30
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$1,182.40
$2,023.30
$1,435.60
$2,023.30
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $242.09 EA-000002....................................... $242.09
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $440.67
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $440.67
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$211.23 033.195................................................. $142.50
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $397.05 033.196.................................................. $490.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $397.05
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$3,210.68
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket.
$3,253.63
$3,391.27
Add on $192.70 for the above Push Buttons
  to be Mounted.
Add on $995.10 for the above Starters and
  Push Button Stations to be Mounted and Wired.
  Supply 20'0" of cable for push button only.
• Mounting Brackets for photo eye
#033.2122
B-05165 ..............................................
$118.10

Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Portable Parts Conveyor, Conveyors, and Slider Bed from your
source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart