Hydraulic-Powered
Elevating Platforms
|
|
|
|
|
|
 |
|
With more than
35 years experience in manufacturing scissor lifts, We
offer a wide range of economical work platforms to meet your
overhead access requirements. Eight standard models allow four
workers access up to 33' working heights. These 1000 lbs. Capacity
high-performance work platforms are equipped with low maintenance
hydraulic systems and are available with AC, DC, or Air-motor drives.
Custom lifts are available with special deck sizes and configurations,
cantilevers and power options. All models have back-up safety features
for worker security. |
|
|
|
|
|
Features: |
|
|
• Rated capacity
1000 lbs./Four persons |
|
|
• Totally enclosed platform
with 42" guardrails, midrails, 4" toeboards
and swing-in gate |
|
|
• Large 3'
x 8' platform with serrated grating deck to assure secure
footing |
|
|
• Built-in
ladder provides access to platform in fully lowered position |
|
|
• Boxed scissor
members and oversize cross-axles reduce
platform sway |
|
|
•
Sturdy rectangular base frame with non-marking 8" swivel casters for
easy rolling and maneuverability. Casters have combined wheel
and
swivel locks |
|
| Four
Workers 1000 lbs. Capacity |
|
|
|
•
Self-storing outriggers extend from base to provide maximum
stability [optional on lower height models] |
|
|
|
|
| Standard
Power: |
|
|
•
120 volt AC with thermal overload
protection
- includes dual contactors for additional
safety |
|
•
Leveling jacks secure unit to floor and compensate for uneven
surfaces [standard on models with raised deck heights above
15', optional on lower height models] |
|
| •
Bubble levels indicate proper leveling, essential for safe operation |
|
•
Low voltage platform controlled circuit
for additional worker protection |
|
| •
Safety Orange finish for high visibility |
|
| •
Meets/exceeds ANSI A92.3-1990 code requirements |
|
|
|
|
|
|
•
Platform controls: for operator safety both hands are required to
change elevation |
|
| Hydraulic
System: |
|
•
Large diameter cylinders with chrome-
plated rams and fluid restrictors |
|
•
Emergency stops:
- located on platform for operator use
- emergency stop also located on base for use by ground personnel.
Lockable to prevent unauthorized use |
|
• Low pressure system
includes by-pass
pressure valve to prevent overload |
|
• Check valve maintains
platform elevation |
|
|
|
• Solenoid valve provides
remote lowering |
Optional
Power: |
|
• Base mounted lowering
valve for safe
descent in power failure
|
•
12 Volt DC deep cycle system available with battery and
charger
- includes double solenoid for additional safety |
|
|
|
|
|
|
• Air-Hydraulic Drive
- Available
|
|
