 |
ENGINEERED
STEEL PRODUCTS |
| Priced
Full Line Products Catalog |
PO
Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401)
421-5679 |
|
|
|
|
Back
to Product Category
G-JIB®
G-FORCE® INTEGRATED
INTO A WORK STATION JIB
|
 |
 |
|
|
|
|
|
|
|
|
We are pleased
to offer the G-Jib®, a
fusion of the G-Force® Intelligent Lifting
Device and the enclosed track work station
jib crane. The G-Jib® delivers servo-
powered lifting and easy movement without
the dead weight of a hoist by mounting
the actuator of the G-Force® near the
mast of the jib.
|
 |
|
|
|
With
capacities to 660 pounds and spans
to 16 feet, the G-Jib® expands application
potential for jib-based Intelligent Lifting
Devices. The G-Jib® is also a high performance, cost-effective
alternative
to a work station jib with a chain hoist. |
|
|
|
Pinpoint
Precision: The G-Jib® delivers
unmatched precision throughout its full
range of speed. This gives the operator
the control necessary to finesse expensive
or fragile parts. |
|
|
|
|
|
|
|
|
Infinite
Speed Control: The G-Jib® moves
with the motion of the operator, going as fast
or as slow as the operator chooses to move.
It is ideal for lifting applications that require
high speed at some points in the cycle and
slow, precise movements at other points. |
Float
Mode Option: As with all other G-Force®
products, the G-Jib® can be equipped with Float
Mode. With Float Mode engaged, operators can
apply a very slight amount of force onto the load
itself to precisely orient loads with both hands
throughout the full stroke range. |
|
|
|
|
|
Easy
Movement: Our enclosed track work station jib
cranes are easier to move and position than traditional
I-beam jibs. The cold-formed, high strength enclosed
track design keeps rolling surfaces clean, which
contributes to easier movement and longer life. |
Safety
Features: Anti-Recoil Technology, Capacity
Overload, Power Loss Protection, Operator Present
Function. |
|
|
|
|
 |
|
|
|
|
G-Jib® |
330 |
660 |
| Maximum
Capacity (Load & Tool) |
330
lbs |
660
lbs |
| Maximum
Lifting Speed Unloaded |
90
fpm |
45
fpm |
| Maximum
Lifting Speed Fully Loaded |
62.5
fpm |
37.5
fpm |
| Maximum
Float Mode Lifting Speed |
51.5
fpm |
32.5
fpm |
| Maximum
Lift Range |
5.5
ft |
5.5
ft |
| Maximum
Lift Stroke |
5.5
ft |
5.5
ft |
|
|
|
|
|
Capacity |
HUH |
Span |
HUB |
A |
B |
C |
|
330# |
6' |
6' |
9.23' |
10.25' |
35.63" |
23.31" |
|
8' |
9.23' |
10.50' |
38.63" |
44.31" |
|
10' |
9.23' |
10.50' |
40.63" |
66.25" |
|
12' |
9.23' |
10.75' |
43.63" |
87.25" |
|
14' |
9.23' |
10.92' |
44.13" |
110.75" |
|
16' |
9.23' |
10.92' |
44.13" |
134.75" |
|
8' |
6' |
11.23' |
12.25' |
35.53" |
23.31" |
|
8' |
11.23' |
12.50' |
38.53" |
42.25" |
|
10' |
11.23' |
12.50' |
40.50" |
66.25" |
|
12' |
11.23' |
12.75' |
40.50" |
87.25" |
|
14' |
11.23' |
12.92' |
44.13" |
110.75" |
|
16' |
11.23' |
13.01' |
44.13" |
134.13" |
|
10' |
6' |
13.23' |
14.25' |
35.53" |
21.25" |
|
8' |
13.23' |
14.50' |
38.53" |
42.25" |
|
10' |
13.23' |
14.50' |
40.50" |
66.25" |
|
12' |
13.23' |
14.75' |
40.50" |
87.25" |
|
14' |
13.23' |
14.92' |
44.13" |
110.75" |
|
16' |
13.23' |
15.01' |
44.13" |
134.13" |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
Capacity |
HUH |
Span |
HUB |
A |
B |
C |
|
660# |
6' |
6' |
9.23' |
10.26' |
37.63" |
21.25" |
|
8' |
9.23' |
10.51' |
40.63" |
42.25" |
|
10' |
9.23' |
10.76' |
43.63" |
53.25" |
|
12' |
9.23' |
10.92' |
43.63" |
87.25" |
|
14' |
9.23' |
11.13' |
47.12" |
108.13" |
|
16' |
9.23' |
11.13' |
47.12" |
132.13" |
|
8' |
6' |
11.23' |
12.26' |
37.50" |
21.25" |
|
8' |
11.23' |
12.51' |
40.50" |
42.25" |
|
10' |
11.23' |
12.76' |
43.50" |
63.25" |
|
12' |
11.23' |
12.92' |
43.50" |
87.25" |
|
14' |
11.23' |
13.13' |
47.13" |
108.13" |
|
16' |
11.23' |
13.13' |
47.13" |
131.13" |
|
10' |
6' |
13.23' |
14.26' |
37.50" |
21.25" |
|
8' |
13.23' |
14.59' |
40.50" |
41.63" |
|
10' |
13.23' |
14.84' |
43.50" |
62.63" |
|
12' |
13.23' |
15.01' |
43.50" |
86.63" |
|
14' |
13.23' |
15.13' |
47.13" |
108.13" |
|
16' |
13.23' |
15.13' |
47.13" |
131.13" |
|
|
|
|
|
 |
|
|
|
|
|
Please
note: These dimensions are for the freestanding
G-Jib units with inline slide handle only, and are subject
to change. Units with other handle configurations will
have different dimensions. Please contact us for
additional dimensions. |
|
|
|
|
|
G-FORCE®
G-JIB
|
 |
| For
more detailed dimensional information contact Customer Service. |
|
|
|
 |
|
 |
|
|
|
*Travel
zone is 5.5’ vertically. Specifying Height Under
Hook and Height Under Boom will position the G-Jib’s
5.5’ vertical travel zone. |
|
|
|
Foundation
Notes: |
|
•
Jib crane foundation requirements are based on soil
pressure of 2500# per square foot. Concrete
pressure
recommended for jib crane foundation is 3000# per
square inch of compressive force. |
|
|
|
Rotation
Limit Notes:
• The G-JIB360 has a rotation limit of 360 degrees.
• The G-JIB200 has a rotation limit of 200 degrees. |
|
|
|
|
PRICING
FOR FREE STANDING G-JIB360
|
| Cap. |
Height
Under
Boom |
Span
|
Series
|
Model Number |
Ship.Wgt.
|
Price |
Series
|
Model Number |
Ship.
Wgt. |
Price |
| 330#
|
8’
|
8’
|
Q
|
G-JIB360-Q-330-8-8
|
648#
|
$15,243 |
iQ
|
G-JIB360-iQ-330-8-8 |
648#
|
$20,850 |
| 10’
|
G-JIB360-Q-330-8-10
|
770#
|
$15,731 |
G-JIB360-iQ-330-8-10 |
770#
|
$21,339 |
| 12’
|
G-JIB360-Q-330-8-12
|
806#
|
$15,816 |
G-JIB360-iQ-330-8-12 |
806#
|
$21,424 |
| 14’
|
G-JIB360-Q-330-8-14
|
1092#
|
$16,154 |
G-JIB360-iQ-330-8-14 |
1092#
|
$21,761 |
| 16’
|
G-JIB360-Q-330-8-16
|
1135#
|
$16,271 |
G-JIB360-iQ-330-8-16 |
1135#
|
$21,879 |
|
10’
|
8’
|
G-JIB360-Q-330-10-8
|
693#
|
$15,741 |
G-JIB360-iQ-330-10-8 |
693#
|
$21,333 |
| 10’
|
G-JIB360-Q-330-10-10
|
837#
|
$16,076 |
G-JIB360-iQ-330-10-10 |
837#
|
$21,668 |
| 12’
|
G-JIB360-Q-330-10-12
|
873#
|
$16,156 |
G-JIB360-iQ-330-10-12 |
873#
|
$21,748 |
| 14’
|
G-JIB360-Q-330-10-14
|
1134#
|
$16,475 |
G-JIB360-iQ-330-10-14 |
1134#
|
$22,066 |
| 16’
|
G-JIB360-Q-330-10-16
|
1401#
|
$16,594 |
G-JIB360-iQ-330-10-16 |
1401#
|
$22,185 |
|
12’
|
8’
|
G-JIB360-Q-330-12-8
|
879#
|
$16,411 |
G-JIB360-iQ-330-12-8 |
879#
|
$21,974 |
| 10’
|
G-JIB360-Q-330-12-10
|
903#
|
$16,448 |
G-JIB360-iQ-330-12-10 |
903#
|
$22,010 |
| 12’
|
G-JIB360-Q-330-12-12
|
940#
|
$16,528 |
G-JIB360-iQ-330-12-12 |
940#
|
$22,090 |
| 14’
|
G-JIB360-Q-330-12-14
|
1176#
|
$16,825 |
G-JIB360-iQ-330-12-14 |
1176#
|
$22,388 |
| 16’
|
G-JIB360-Q-330-12-16
|
1401#
|
$17,544 |
G-JIB360-iQ-330-12-16 |
1401#
|
$23,106 |
|
14’
|
8’
|
G-JIB360-Q-330-14-8
|
1113#
|
$16,926 |
G-JIB360-iQ-330-14-8 |
1113#
|
$22,445 |
| 10’
|
G-JIB360-Q-330-14-10
|
1126#
|
$16,964 |
G-JIB360-iQ-330-14-10 |
1126#
|
$22,483 |
| 12’
|
G-JIB360-Q-330-14-12
|
1155#
|
$17,044 |
G-JIB360-iQ-330-14-12 |
1155#
|
$22,563 |
| 14’
|
G-JIB360-Q-330-14-14
|
1218#
|
$17,214 |
G-JIB360-iQ-330-14-14 |
1218#
|
$22,733 |
| 16’
|
G-JIB360-Q-330-14-16
|
1639#
|
$17,994 |
G-JIB360-iQ-330-14-16 |
1639#
|
$23,513 |
| 660#
|
8’
|
8’
|
Q
|
G-JIB360-Q-660-8-8
|
771#
|
$19,519 |
IQ
|
G-JIB360-iQ-660-8-8 |
771#
|
$24,536 |
| 10’
|
G-JIB360-Q-660-8-10
|
842#
|
$19,600 |
G-JIB360-iQ-660-8-10 |
842#
|
$24,618 |
| 12’
|
G-JIB360-Q-660-8-12
|
868#
|
$19,654 |
G-JIB360-iQ-660-8-12 |
868#
|
$24,671 |
| 14’
|
G-JIB360-Q-660-8-14
|
1342#
|
$20,573 |
G-JIB360-iQ-660-8-14 |
1342#
|
$25,590 |
| 16’
|
G-JIB360-Q-660-8-16
|
1477#
|
$20,761 |
G-JIB360-iQ-660-8-16 |
1477#
|
$25,779 |
|
10’
|
8’
|
G-JIB360-Q-660-10-8
|
838#
|
$19,861 |
G-JIB360-iQ-660-10-8 |
838#
|
$24,861 |
| 10’
|
G-JIB360-Q-660-10-10
|
908#
|
$19,940 |
G-JIB360-iQ-660-10-10 |
908#
|
$24,940 |
| 12’
|
G-JIB360-Q-660-10-12
|
935#
|
$19,999 |
G-JIB360-iQ-660-10-12 |
935#
|
$24,999 |
| 14’
|
G-JIB360-Q-660-10-14
|
1404#
|
$20,951 |
G-JIB360-iQ-660-10-14 |
1404#
|
$25,951 |
| 16’
|
G-JIB360-Q-660-10-16
|
1514#
|
$21,149 |
G-JIB360-iQ-660-10-16 |
1514#
|
$26,149 |
|
12’
|
8’
|
G-JIB360-Q-660-12-8
|
905#
|
$20,235 |
G-JIB360-iQ-660-12-8 |
905#
|
$25,208 |
| 10’
|
G-JIB360-Q-660-12-10
|
975#
|
$20,315 |
G-JIB360-iQ-660-12-10 |
975#
|
$25,288 |
| 12’
|
G-JIB360-Q-660-12-12
|
1002#
|
$20,369 |
G-JIB360-iQ-660-12-12 |
1002#
|
$25,341 |
| 14’
|
G-JIB360-Q-660-12-14
|
1539#
|
$21,560 |
G-JIB360-iQ-660-12-14 |
1539#
|
$26,533 |
| 16’
|
G-JIB360-Q-660-12-16
|
1688#
|
$21,964 |
G-JIB360-iQ-660-12-16 |
1688#
|
$26,936 |
|
14’
|
8’
|
G-JIB360-Q-660-14-8
|
1481#
|
$21,673 |
G-JIB360-iQ-660-14-8 |
1481#
|
$26,601 |
| 10’
|
G-JIB360-Q-660-14-10
|
1509#
|
$21,751 |
G-JIB360-iQ-660-14-10 |
1509#
|
$26,680 |
| 12’
|
G-JIB360-Q-660-14-12
|
1529#
|
$21,805 |
G-JIB360-iQ-660-14-12 |
1529#
|
$26,734 |
| 14’
|
G-JIB360-Q-660-14-14
|
1605#
|
$22,013 |
G-JIB360-iQ-660-14-14 |
1605#
|
$26,941 |
| 16’
|
G-JIB360-Q-660-14-16
|
1764#
|
$22,445 |
G-JIB360-iQ-660-14-16 |
1764#
|
$27,374 |
|
|
|
|
|
| PRICE
INCLUDES: |
|
|
|
Jib
boom, Free Standing mast assembly, G-Force® lifting device
assembly, and handle (anchor bolts available,
but not included). |
|
|
|
|
|
G-JIB FLOAT MODE OPTION |
|
|
Details |
Price Adder |
• Reduces the amount of force on the load
allowing operators to manipulate the load
with their hand for more precise load orientation |
$750.00 |
|
|
|
Q SERIES VIRTUAL LIMIT SOFTWARE UPGRADE |
|
Suffix |
Details |
Price
Adder |
|
- SU |
• Software upgrade which adds virtual limits
to a Q model G-JIB |
$1,875 |
• Includes programmable upper/lower hard
limits, upward/downward points of speed
reduction and upward resume speed point |
|
|
|
|
|
|
INSTALLATION
FOR FREE STANDING CRANE (diagram 1B)
|
|
|
|
 |
|
|
|
Refer
to chart 1B to determine anchor bolt load and footer
width and depth. |
|
|
|
|
CHART
1B
|
|
Cap. |
HUB |
Span |
Model No. |
Track
Series |
Footer
Depth (L) |
Footer
Width (M) |
Mast
Dia. |
Anchor
Bolt Load |
| 330#
|
8’
|
8' |
G-JIB360-Q-330-8-8 |
500
|
36”
|
48”
|
8-5/8”
|
1,071
# |
|
10' |
G-JIB360-Q-330-8-10 |
500
|
36”
|
48”
|
12-3/4”
|
1,417
# |
|
12' |
G-JIB360-Q-330-8-12 |
500
|
48”
|
48”
|
12-3/4”
|
1,771
# |
|
14' |
G-JIB360-Q-330-8-14 |
1000
|
48”
|
48”
|
12-3/4”
|
2,201
# |
|
16' |
G-JIB360-Q-330-8-16 |
1000
|
48”
|
48”
|
12-3/4”
|
2,594
# |
| 10’
|
8' |
G-JIB360-Q-330-10-8 |
500
|
36”
|
48”
|
12-3/4”
|
1,072
# |
|
10' |
G-JIB360-Q-330-10-10 |
500
|
36”
|
48”
|
12-3/4”
|
1,417
# |
|
12' |
G-JIB360-Q-330-10-12 |
500
|
48”
|
48”
|
12-3/4”
|
1,772
# |
|
14' |
G-JIB360-Q-330-10-14 |
1000
|
48”
|
48”
|
12-3/4”
|
2,201
# |
|
16' |
G-JIB360-Q-330-10-16 |
1000
|
48”
|
48”
|
14”
|
2,037
# |
|
12' |
8' |
G-JIB360-Q-330-12-8 |
1000
|
48”
|
48”
|
12-3/4”
|
2,083
# |
|
10' |
G-JIB360-Q-330-12-10 |
1000
|
48”
|
48”
|
12-3/4”
|
2,739
# |
|
12' |
G-JIB360-Q-330-12-12 |
1000
|
48”
|
48”
|
12-3/4”
|
3,405
# |
|
14' |
G-JIB360-Q-330-12-14 |
2000
|
48”
|
60”
|
14”
|
3,354
# |
|
16' |
G-JIB360-Q-330-12-16 |
2000
|
48”
|
60”
|
14”
|
3,953
# |
|
14' |
8' |
G-JIB360-Q-330-14-8 |
1000
|
48”
|
48”
|
14”
|
2,083
# |
|
10' |
G-JIB360-Q-330-14-10 |
1000
|
48”
|
48”
|
14”
|
2,739
# |
|
12' |
G-JIB360-Q-330-14-12 |
1000
|
48”
|
48”
|
14”
|
3,405
# |
|
14' |
G-JIB360-Q-330-14-14 |
2000
|
48”
|
60”
|
14”
|
3,354
# |
|
16' |
G-JIB360-Q-330-14-16 |
2000
|
48”
|
60”
|
16”
|
3,953
# |
| 660#
|
8’
|
8' |
G-JIB360-Q-660-8-8 |
500
|
36”
|
48”
|
12-3/4" |
1,071
# |
|
10' |
G-JIB360-Q-660-8-10 |
500
|
36”
|
48”
|
12-3/4" |
1,417
# |
|
12' |
G-JIB360-Q-660-8-12 |
500
|
48”
|
48”
|
12-3/4" |
1,771
# |
|
14' |
G-JIB360-Q-660-8-14 |
1000
|
48”
|
48”
|
12-3/4" |
2,201
# |
|
16' |
G-JIB360-Q-660-8-16 |
1000
|
48”
|
48”
|
14" |
2,594
# |
| 10’
|
8' |
G-JIB360-Q-660-10-8 |
500
|
36”
|
48”
|
12-3/4" |
1,072
# |
|
10' |
G-JIB360-Q-660-10-10 |
500
|
36”
|
48”
|
12-3/4" |
1,417
# |
|
12' |
G-JIB360-Q-660-10-12 |
500
|
48”
|
48”
|
12-3/4" |
1,772
# |
|
14' |
G-JIB360-Q-660-10-14 |
1000
|
48”
|
48”
|
12-3/4" |
2,201
# |
|
16' |
G-JIB360-Q-660-10-16 |
1000
|
48”
|
48”
|
14" |
2,037
# |
|
12' |
8' |
G-JIB360-Q-660-12-8 |
1000
|
48”
|
48”
|
12-3/4" |
2,083
# |
|
10' |
G-JIB360-Q-660-12-10 |
1000
|
48”
|
48”
|
12-3/4" |
2,739
# |
|
12' |
G-JIB360-Q-660-12-12 |
1000
|
48”
|
48”
|
12-3/4" |
3,405
# |
|
14' |
G-JIB360-Q-660-12-14 |
2000
|
48”
|
60”
|
14" |
3,354
# |
|
16' |
G-JIB360-Q-660-12-16 |
2000
|
48”
|
60”
|
16" |
3,953
# |
|
14' |
8' |
G-JIB360-Q-660-14-8 |
1000
|
48”
|
48”
|
14" |
2,083
# |
|
10' |
G-JIB360-Q-660-14-10 |
1000
|
48”
|
48”
|
14" |
2,739
# |
|
12' |
G-JIB360-Q-660-14-12 |
1000
|
48”
|
48”
|
14" |
3,405
# |
|
14' |
G-JIB360-Q-660-14-14 |
2000
|
48”
|
60”
|
14" |
3,354
# |
|
16' |
G-JIB360-Q-660-14-16 |
2000
|
48”
|
60”
|
16" |
3,953
# |
|
| Chart
1B. Chart for determining footer depth, footer width and
anchor bolt load. |
Hexagonal
Base Plates for Foundationless Jibs (6 bolt pattern):
For jib cranes that can be mounted on a 6” foundation that
is free of cracks, seams, expansion joints, and
walls (chart 3B). |
|
|
|
|
|
|
| A)
Anchor bolts (by others) for hexagonal base
plates must: |
| Capacity
|
HUB
|
Span
|
Foundation
size (sq. ft.) |
| 330#
|
8’
|
8’
|
5
x 5 |
| 10’
|
5.5
x 5.5 |
| 12’
|
5.75
x 5.75 |
| 10’
|
8’
|
5
x 5 |
| 10’
|
5.5
x 5.5 |
| 12’
|
5.75
x 5.75 |
| 12’
|
8’
|
5
x 5 |
| 10’
|
5.5
x 5.5 |
| 12’
|
5.75
x 5.75 |
| 14’
|
8’
|
5
x 5 |
| 10’
|
5.5
x 5.5 |
| 12’
|
5.75
x 5.75 |
| 660#
|
8’
|
4’
|
5
x 5 |
| 6’
|
5.5
x 5.5 |
| 8’
|
6
x 6 |
| 10’
|
4’
|
5
x 5 |
| 6’
|
5.5
x 5.5 |
| 8’
|
6
x 6 |
| 12’
|
4’
|
5
x 5 |
| 6’
|
5.5
x 5.5 |
| 8’
|
6
x 6 |
| 14’
|
4’
|
5
x 5 |
| 6’
|
5.5
x 5.5 |
| 8’
|
6
x 6 |
|
|
|
|
|
|
|
|
•
be 1” in diameter (diagram 3C). |
|
|
|
|
|
Note:
Jib cranes that have an NP6 designation have a special
design that is different than standard G-Jib Intelligent
Jib Cranes for poured foundations. The NP6 base plate
stiffener allows for a 1” diameter anchor bolt as opposed
to the standard baseplate stiffener that allows for a 1-1/4”
diameter anchor bolt. If you have a standard design G-Jib
for a poured foundation. Contact our Inside Sales if you are
unsure what style (NP6 or Standard) G-Jib Intelligent Jib
Crane you have. |
|
|
|
|
|
|
•
be embedded at least 4” into the floor, not to exceed 3/4
of the foundation depth. |
|
|
|
|
|
Note:
A minimum 6" thick reinforced concrete floor is
required. |
|
|
|
|
|
|
•
have minimum of two threads above nut after installation. |
|
|
|
|
|
Note:
Jib crane foundation requirements are based on soil
pressure of 2500# per square foot. Concrete pressure
recommended for jib crane foundation is 3000# per square
inch of compressive force. |
|
|
|
|
|
Note:
Foundationless G-Jib Intelligent Jib Cranes should be
mounted to a shallow foundation, centered on a square foot
area that is free from cracks, seams and walls mounted with
chemical anchor bolts to withstand a minimum of 3470#
of pull out force. |
|
|
|
|
|
Note:
Chemical (epoxy) anchor bolts are recommended
because of their ability to withstand the vibrating loads
caused by the hoist stopping and starting under load. |
|
|
|
|
|
|
|
|
B)
Drill holes in concrete floor using pre-drilled holes in base
plate or diagram 3C as a guide (use drill bit size
recommended by anchor bolt manufacturer). |
|
|
|
|
|
|
|
C)
Install anchor bolts (Grade 5 or better) and hardware
(by others) according to manufacturer’s installation
directions and requirements. |
|
|
|
|
COLUMN/WALL MOUNTED G-JIB200 |
| Cap. |
Span
|
Series
|
Model
Number |
Ship.
Wgt. |
Price |
Series
|
Model
Number |
Ship.
Wgt. |
Price |
| 330#
|
8’
|
Q
|
G-JIB200-Q-330-8
|
318#
|
$15,373 |
IQ
|
G-JIB200-iQ-330-8
|
318#
|
$20,929 |
| 10’
|
G-JIB200-Q-330-10
|
343#
|
$15,440 |
G-JIB200-iQ-330-10
|
343#
|
$20,996 |
| 12’
|
G-JIB200-Q-330-12
|
382#
|
$15,460 |
G-JIB200-iQ-330-12
|
382#
|
$21,016 |
| 14’
|
G-JIB200-Q-330-14
|
514#
|
$15,814 |
G-JIB200-iQ-330-14
|
514#
|
$21,370 |
| 16’
|
G-JIB200-Q-330-16
|
546#
|
$15,824 |
G-JIB200-iQ-330-16
|
546#
|
$21,380 |
| 660#
|
8’
|
Q
|
G-JIB200-Q-660-8
|
344#
|
$19,205 |
IQ
|
G-JIB200-iQ-660-8
|
344#
|
$24,181 |
| 10’
|
G-JIB200-Q-660-10
|
414#
|
$19,313 |
G-JIB200-iQ-660-10
|
414#
|
$24,289 |
| 12’
|
G-JIB200-Q-660-12
|
441#
|
$19,348 |
G-JIB200-iQ-660-12
|
441#
|
$24,324 |
| 14’
|
G-JIB200-Q-660-14
|
686#
|
$19,966 |
G-JIB200-iQ-660-14
|
686#
|
$24,943 |
| 16’
|
G-JIB200-Q-660-16
|
735#
|
$19,979 |
G-JIB200-iQ-660-16
|
735#
|
$24,955 |
|
|
|
|
|
| PRICE
INCLUDES: |
|
|
|
Jib
boom, Free Standing mast assembly, G-Force® lifting device
assembly, and handle (anchor bolts available,
but not included). |
|
|
|
|
|
G-JIB FLOAT MODE OPTION |
|
|
Details |
Price Adder |
• Reduces the amount of force on the load
allowing operators to manipulate the load
with their hand for more precise load orientation |
$750.00 |
|
|
|
Q SERIES VIRTUAL LIMIT SOFTWARE UPGRADE |
|
Suffix |
Details |
Price
Adder |
|
- SU |
• Software upgrade which adds virtual limits
to a Q model G-JIB |
$1,875 |
• Includes programmable upper/lower hard
limits, upward/downward points of speed
reduction and upward resume speed point |
|
|
|
|
|
| Wall/Column
Mounted Crane (diagram 1A) |
|
 |
Refer
to chart 1A to determine thrust and pull,
and distance between pivot mounting assembly
(bracket) centers. |
|
|
|
|
| Chart
1A. Chart for determining thrust and pull, and pivot
mounting (bracket) centers. |
|
| CAPACITY
|
SPAN
(ft) |
MODEL
NUMBER |
TRACK
SERIES |
B*
(in) |
THRUST
& PULL |
| 330#
|
8’
|
G-JIB200-Q-330-8
|
500
|
48”
|
1,390
# |
| 10’
|
G-JIB200-Q-330-10
|
500
|
48”
|
1,784
# |
| 12’
|
G-JIB200-Q-330-12
|
500
|
60”
|
1.750
# |
| 14’
|
G-JIB200-Q-330-14
|
1000
|
60”
|
2,152
# |
| 16’
|
G-JIB200-Q-330-16
|
1000
|
60”
|
2,512
# |
| 660#
|
8’
|
G-JIB200-Q-660-8
|
1000
|
48”
|
2,722
# |
| 10’
|
G-JIB200-Q-660-10
|
1000
|
60”
|
2,781
# |
| 12’
|
G-JIB200-Q-660-12
|
1000
|
60”
|
3,394
# |
| 14’
|
G-JIB200-Q-660-14
|
2000
|
72”
|
3,451
# |
| 16’
|
G-JIB200-Q-660-16
|
2000
|
72”
|
4,010
# |
|
*This column provides the distance between pivot mounting
assembly (bracket) centers.
|
|
|
|
|
G-JIB
HANDLE OPTIONS
|
|
Pricing
and Configurations
|
|
|
|
| Remote
Mount Slide Handle |
|
|
G-JIB HANDLE OPTIONS |
|
Suffix |
Detail |
Price
Adder |
|
- RSH
|
• For mounting slide handle on lifting tool |
$688 |
• Must provide the factory with length from
the coil cord to the handle when ordering |
|
• Call us for lengths greater than 2 m (6.5') |
|
 |
|
|
|
|
|
|
|
|
|
SUSPENDED PENDANT CONTROL HANDLE |
|
Suffix |
Details |
Price
Adder |
|
-SPH |
• Used when a pendant station configuration is
required |
$191 |
• Allows operator to use more of the available
lifting stroke |
|
/PVS |
• Single pilot valve (or part number 74380) |
$206 |
|
/PVD |
• Dual pilot valve - single valves mounted to each
side (or part number 74381) |
$400 |
|
/CSS
|
• Single control switch (or part number 74390)
|
$450
|
|
/CSD |
• Dual control switch - single switches mounted
to each side (or part number 74391) |
$838 |
|
/PVCS |
• Single pilot valve on one side and single control
switch on the opposite side (or part number
74395) |
$575 |
|
| Suspended
Pendant Control Handle |
|
 |
|
|
|
|
Pilot
valves and switches are assembled to the pendant handle if handle
and
components are ordered together. |
|
|
|
|
|
|
|
Part
Number Example: For a 330# IQ G-JIB360 with a 10’ span,
8’ height
under hook, 14’ height under boom, suspended pendant control
handle
and single pilot valve, use the following part number:
G-JIB360-iQ-330-8-14-10-N-Y-SPH/PVS |
|
|
|
|
|
For
levers other than up and down, indicate on order desired
lever engraving up to 7 characters. |
|
|
|
| Remote
Mount Pendant Control Handle |
|
|
 |
|
|
REMOTE MOUNT PENDANT CONTROL HANDLE |
|
Suffix |
Details |
Price
Adder |
|
- RPH |
• For mounting handle on lifting tool |
$688 |
• Used when tooling is too large or unstable to use the
remote mount slide handle |
• Must provide factory with length from coil cord to the
handle when ordering |
|
• Call us for lengths greater than 2 m (6.5') |
See Suffixes under Suspended Pendant Handle to add pilot
valves
and control switches. |
|
|
|
|
Part
Number Example: For a 330# iQ G-JIB360 with a 10’ span,
8’ height under
hook, 14’ height under boom, remote mount pendant control
handle and
dual control switch, use the following part number:
G-JIB360-iQ-330-8-14-10-N-Y-SPH/PVS |
|
|
|
|
Secondary Handle Kits |
|
Part No. |
Option |
Details |
Price |
|
- DSH |
Secondary Remote Mount Slide
Handle Kit (iQ Series Only) |
• Allows control of a single iQ model G-JIB from two different
remote
mount slide handles |
$2,000 |
• Must provide factory with length of cable required to
go between primary
handle and secondary handle |
|
- DPH |
Secondary Remote Mount Pendant
Handle Kit (iQ Series Only) |
• Allows control of a single iQ model G-JIB from two different
remote mount
pendant handles |
$2,000 |
• Must provide us with length of cable required to go
between primary
handle and secondary handle |
|
|
Secondary
handle configuration including options (i.e. auxiliary control
pilot valves and switches) will be identical
to primary handle. List price of additional options is not included
in the handle kit price and must be added
separately. If you have questions or other configurations are
needed for secondary handle kits,
contact our Customer Service Dept. |
|
|
OPTIONAL
ACCESSORIES
|
|
(Pricing
is in addition to G-JIB Base Price)
|
|
|
|
|
| G360™
Collector |
|
|
|
 |
|
|
G360™ Collector |
|
Part No. |
Details |
Price |
|
- CI |
G360™
Collector for Inline Slide Handle
|
$1,063 |
|
- CR |
Standalone
G360™ Collector for Remote
Mount Applications
|
$1,063 |
|
|
|
|
|
|
|
|
|
|
Latch
Hook
|
|
|
|
 |
|
|
|
Latch
Hook |
|
|
Suffix |
Details |
Price |
|
- LH |
Safety Latch
Hook |
$169 |
|
|
|
|
|
|
In
applications where the operator is required to open the safety
latch to release
the load, the latch hook option may create a finger-crushing
hazard. When the
operator is required to open the safety latch with the G-JIB
turned on, the latch
assembly may be removed to avoid finger-crushing. |
|
|
|
|
Can
be ordered separately from G-JIB using part number 74199 at
a price of $169. |
|
|
|
| Portable
Base |
|
|
G-JIB PORTABLE BASE |
|
HUH |
Capacity |
330# |
660# |
|
4' - 6' |
Model Number |
PRTBSE.420 |
PRTBSE.610 |
|
Price |
$2,628 |
$3,243 |
|
Square Length |
48" |
72" |
|
Thickness |
24" |
12" |
|
Shipping Weight |
740# |
889# |
|
8' - 14' |
Model Number |
PRTBSE.610 |
CALL US* |
|
Price |
$3,243 |
|
Square Length |
72" |
|
Thickness |
12" |
|
Shipping Weight |
889# |
|
10' |
Model Number |
CALL US* |
CALL US* |
|
Price |
|
Square Length |
|
Thickness |
|
Shipping Weight |
|
 |
|
|
|
For
PRTBSE.420 and PRTBSE.610, fork
pocket dimensions = 12” inside width, 4” inside
depth, and 29” from centerline to centerline. |
|
|
|
|
|
*Contact
our Customer Service dept. for availability. Portable base availability
is dependent upon pipe size and bolt circle. |
|
|
|
|
|
Price
Includes: fork pockets, leveling feet and mast mounting
hardware.
Concrete and final assembly by others (not included in list
price). |
|
|
Suffix |
Option |
Details |
Price
Adder |
|
- AH |
Slide on
Air Hose |
• Used when air is needed for end effector tooling |
$250.00
(Standard) |
|
• 1/4" coil air hose |
$343.75
(Extended) |
|
• Includes 1/4" ID nylon air hose with 1/4"
NPT male swivel connectors |
|
- T |
Transformer |
• G-JIB input power with transformer is 220 VAC single
phase +/- 10% |
$562.50 |
|
• This option is necessary to step up voltage to 460 VAC
or step down voltage to 110 VAC |
|
• Specify input power at time of order |
• Transformer is shipped loose and must be wired by customer
- wiring is not included
with transformer |
- TEC
- BEC |
Top or Bottom
Entry 4-Ring
Collector |
• For 360° rotation |
$603.75 |
• Includes collectors and covers, 4 pieces of #14 wire
through mast, junction box at
the base of the mast, appropriate amount of festoon
gliders and flat cable |
|
- TEAC
- BEAC |
Top or Bottom
Entry 4-Ring
Collector |
• Includes internally piped 1/2” diameter airline, appropriate
number of festoon trolleys
and 3/8” diameter airline, male NPT at bottom of
mast assembly and top of pivot assemblies |
$721.25 |
|
|
|
TOOLING
INTEGRATION ACCESSORIES
|
|
(Pricing
is in addition to G-JIB Base Price)
|
| Handle
Brackets |
|
|
|
|
HANDLE BRACKETS |
Part
No. |
Details |
Price |
|
74350 |
Remote Mount Handle Bracket - used for mounting
a slide handle to end
tooling when tooling does not mount to the slide handle
at both top and
bottom. Also provides a means of mounting auxiliary pneumatic
or electric
control levers to a remote mounted slide handle |
$100 |
|
74351 |
In-Line Slide Handle Auxiliary Control Bracket
- provides a means of
mounting auxiliary pneumatic or electric control levers
to an in-line slide handle |
$88 |
|
 |
|
|
|
|
|
|
|
|
Remote
Mount Handle
Clamp Collars
|
|
|
|
|
|
REMOTE
MOUNT HANDLE CLAMP COLLARS |
 |
|
|
| Part
No. |
Details |
Price |
| 70125 |
7/8” Inner
Diameter Clamp Collar |
$66 |
| 70126 |
1” Inner
Diameter Clamp Collar |
$66 |
| 70127 |
1-1/4” Inner
Diameter Clamp Collar |
$75 |
| 70128 |
1-5/8” Inner
Diameter Clamp Collar |
$94 |
|
|
|
|
|
|
Collar
clamp mounting plate used to secure G-JIB remote mount slide
handle (with
optional remote mount handle bracket not included) or remote
mount pendant handle
to tooling frames constructed of round tube. |
|
|
|
|
|
|
|
|
Auxiliary
Control Valves and Switches
|
|
AUXILIARY
CONTROL VALVES AND SWITCHES |
 |
|
|
Part No. |
Details |
Price |
|
74360 |
Single
Auxiliary Control Pilot Valve Kit - bracket and
pneumatic pilot valve for mounting to the left or right
side
of either an in-line or remote mounted slide handle fitted
with a handle bracket |
$268.75 |
|
74361 |
Additional
Auxiliary Control Pilot Valve Kit - single pneumatic
pilot valve only for adding a second valve to either the
left or
right side of an in-line or remote mounted slide handle
fitted
with a single auxiliary control pilot valve or electric
switch kit |
$231.25 |
|
74370 |
Single
Auxiliary Control Switch Kit - bracket and electric
switch assembly for mounting to the left or right side
of either
an in-line or remote mounted slide handle fitted with
a handle
bracket |
$518.75 |
|
74371 |
Additional
Auxiliary Control Switch Kit - single electric switch
assembly only for adding a second switch to either the
left or
right side of an in-line or remote mounted slide handle
fitted
with a single auxiliary control pilot valve or electric
switch kit |
$481.25 |
|
|
|
|
|
Pilot
valve and control switch kits are shipped loose and must be
assembled to the
slide handle in the field. |
|
| Part
No. |
Option
|
Details
|
Price |
|
78514 |
Expansion
8-Point
Input Output Block
|
Provides
8 control points below the swivel to allow inputs or outputs
on end tooling.
Standard functionality assigned to certain I/O points,
but may be customized to meet
the needs of the application with custom programming done
by us. Call our customer
service dept. for more information on custom programming. |
$562.50 |
|
78681 |
1
Meter Cable
|
I/O
block connector at one end and flying leads at opposite
end |
$25.00 |
|
78682 |
2
Meter Cable
|
$37.50 |
|
78676 |
1
Meter Cable
|
I/O
block connector at one end and 8mm female connector for
external devices
(i.e. sensors) at opposite end |
$43.75 |
|
78677 |
2
Meter Cable
|
$62.50 |
|
78691 |
1
Meter Cable
|
12mm
connector for the switches at one end and flying leads
at opposite end |
$40.00 |
|
78692 |
2
Meter Cable
|
$56.25 |
|
78686 |
1
Meter Normally
Open Cable
|
12mm
connector for the switches at one end and I/O block connector
at opposite end |
$62.50 |
|
78687 |
1
Meter Normally
Closed Cable
|
12mm
connector for the switches at one end and I/O block connector
at opposite end |
$62.50 |
|
|
G-Force Work
Station Jib Cranes, Cranes, Articulating Jib Cranes, Gorbel
Jib Cranes, Jib Cranes,
Floor Mounted Jib Cranes, Gorbel Cranes, Hoist, and Jib Booms
from your source for material handling equipment.
|
Back
to Product Category |
 |
|
