FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
PO Box 72659 Providence, RI 02907
Toll free:(800) 421-0314 • In RI:(401) 421-0314 • Fax:(401) 421-5679
Home Index Order Search Quote Info About Us Services
Back to Product Category
DRIVE TRACTORS
Drive tractors are used to propel bridge cranes, hoists
   on monorails and switches
Available with air and explosion proof motors besides
    the standard electrical motors
Available for most enclosed track systems
The standard speeds for model T-144 are 35 FPM
55FPM and 70FPM.  Other speeds can be supplied at
additional cost. Air powered TRACTORS are available
in most models with similar capacities and speeds as
electrical TRACTORS at additional cost. STANDARD
operating power circuits for all Tractor models are 230
and 460V, 3PH, 60hz. Also available are 208 and
575V, 3PH, 60hz and single phase circuits at additional
cost.
The T-144-ET TRACTOR is available to operate on
GORBEL, ABUS, DEMAG, SPANCO, and UNIFIED
OR ZIMMERMAN enclosed tracks. Standard travel
speeds are: 35, 50, and 70 FPM. (See below standard T144)
$1,625.00

MODEL T-144 DRIVE TRACTOR
The model T-144 TRACTOR will pull a maximum load of 15,000 lbs
    at a speed of 70 FPM. This tractor is to be used for "H3" or class
    "C" service classifications.
Model T-144
Operates on rail flanges from 2" to 8" width and can negotiate 36"
    radius curves.
Pulls a maximum load of 15,000 lbs at a speed of 70 FPM.
Please note that 35, 55 & 70 FPM are stock speeds.
STANDARD VOLTAGES are 230 and 460V, 3PH, 60Hz.  Also
   available are 208 and 575V, 3PH, 60Hz and single phase circuits at
   additional cost.
Supplied with NEMA1 enclosure and controls less pushbutton
    pendant
Ordering Note:  Specify operating voltage, beam flange width, speed, and any special options.

Dimensions for the T-144 Tractor
OTHER CONFIGURATIONS AVAILABLE

MODEL T-144-ET DRIVE TRACTOR
Model T-144-ET Drive Tractor Designed For Enclosed Track Systems
$1,869.00
The T-144-ET TRACTOR is available to operate on GORBEL, ABUS, DEMAG, SPANCO, and UNIFIED OR
    ZIMMERMAN enclosed tracks. Standard travel speeds are: 35, 50, and 70 FPM.
Ordering Note:  Specify operating voltage, (track make, model and size), speed, and any special options.
DIMENSIONS FOR MODEL T-144-ET DRIVE TRACTOR
PUSH BUTTONS
2 Extra Single Speed Push Buttons .......................................................................................................................
$175.00
4 Extra Single Speed Push Buttons .......................................................................................................................
$275.00
6 Extra Single Speed Push Buttons .......................................................................................................................
$340.00
Back to Product Category
Visa - MasterCard - AMEX
Home - Index - Order - Search - Quote - Info - About Us - Services