FS Industries ENGINEERED STEEL PRODUCTS
Priced Full Line Products Catalog
20 Technology Way West Greenwich, RI 02817
Toll free:(800) 421-0314 • In RI:(401) 272-4570 • Fax:(401) 421-5679
Home Order Search Quote Contact Us About Us My Account Shopping Cart
Back to Product Category

CONVEYOR ACCESSORIES GATES

MANUAL GATE

manual gate
Skatewheel & 1-3/8 in. Roller
• 4 widths (12 in. to 24 in. OAW)*
• 4 ft., & 5 ft. lengths *
• Steel or aluminum, skatewheels or rollers
• 2-1/2 in. x 1 in. channels–12 Ga. galvanized steel
  or .125 in. aluminum
• Safety gate latch
1.9 in. & 2.0 in. Roller
• 12 widths (13 in. to 39 in. BR)*
• 4 ft., & 5 ft. lengths. *
• 1.9 in. galv., unplated or aluminum, or 2.0 in.
   unplated rollers
• 10 Ga. powder painted steel channels 3- 1/2 in. x
   1-1/2 in. (set high) or 4-1/2 in. x 1-1/2 in. (set low)
• Safety gate latch
*NOTE: Maximum width and length determined by roller centers and type of roller. Inquire.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


IMPORTANT NOTES. . .
PRICE FOR GATE HINGE ASSEMBLY ONLY:
FOR GATE ASSEMBLY (4' or 5' Long)
(Less Gravity Section) ALL WIDTHS
  Add price of 4' or 5' long gravity conveyor section to Gate Assembly price.
Skatewheel (up to 5' long) ..................... per set ..... $105.01
1-3/8" Dia. Roller (up to 5' long) ........... per set ..... $105.01
WHEN ORDERING
1.9" or 2.0" Dia. Roller (up to 5' long) ..... per set ..... $138.42
  Please specify section to which Gate Hinge Assembly will be attached.
GATE HINGE ASSEMBLY
  DOES NOT INCLUDE CONVEYOR

GRAVITY DIE SPRING BALANCED GATE ASSEMBLY

• Skatewheel & 1-3/8 in. Roller Spring Balanced Gates can be used with several types of
gravity wheel and roller conveyor. Gates provide a passage-
way for personnel, lift trucks, and other equipment.
Tension springs are easily adjusted to provide minimum
weight lift.
• 4 widths (12 in. to 24 in. OAW)
• 4 ft. & 5 ft. lengths
• Steel or aluminum, skatewheels or rollers
• 2-1/2 in. x 1 in. channels–12 Ga. galvanized steel or
  .125 in. aluminum
gravity die spring balance gate assembly
• HD compression springs
• Safety gate latch
• Can be attached to 138-ACC conveyor
• 1.9 in. & 2.0 in. Roller
• 12 widths (13 in. to 39 in. BR)
• 4 ft. & 5 ft. lengths (1.9 in. & 2.0 in.), 4 ft. lengths
  (2.5 in.)
• 1.9 in. galv., unplated or aluminum, or 2.0 in.
   unplated rollers
• 1.9 in. & 2.0 in. roller: 10 Ga. powder painted steel
   channels, 3-1/2 in. x 1-1/2 in. (set high) or 4-1/2 in.
   x 1-1/2 in. (set low) powder painted steel channels
   (set high or set low)
• HD compression springs
• Safety gate latch
• Can be attached to 190-LR, 190-ACC, &
   190-ACZ conveyors
Photo shown is Spring Balanced Gate for 1.9 in.
dia. roller conveyor.
NOTE: Maximum width and length determined by
roller centers and type of roller.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR GRAVITY DIE SPRING BALANCED GATE ASSEMBLY
3SW-SBG GRAVITY DIE SPRING GATE ASSEMBLY 3AW-SBG GRAVITY DIE SPRING GATE ASSEMBLY
Size To
Order
Between Rail Width 
10"
13"
16"
22"
 Overall Frame Width
12"
15"
18"
24"
5'
4'
Size To
Order
Between Rail Width  
10"
13"
16"
22"
 Overall Frame Width 
12"
15"
18"
24"
5'
4'
• Painted Steel Frame (3SW-SBG) or Aluminum Frame
   (3AW-SBG)
• 16 Wheels Per Foot On 12" OAW
• 16 Wheels Per Foot On 15" OAW
• 20 Wheels Per Foot On 18" OAW
• 28 Wheels Per Foot On 22" OAW
• Hinge Mechanism With Die Springs and Gravity Section
• Latch Mechanism
• Lift Handles On Both Sides
• Less Floor Supports
SSR-SBG GRAVITY DIE SPRING GATE ASSEMBLY SAR-SBG GRAVITY DIE SPRING GATE ASSEMBLY
3" Roller Centers 3" Roller Centers
Size To
Order
Between Rail Width
10"
13"
16"
22"
   Overall Frame Width
12"
15"
18"
24"
5'
4'
Size To Order
  Between Rail Width  
10"
13"
16"
22"
   Overall Frame Width 
12"
15"
18"
24"
5'
4'
SSR-SBG GRAVITY DIE SPRING GATE ASSEMBLY SAR-SBG GRAVITY DIE SPRING GATE ASSEMBLY
1-1/2" Roller Centers 1-1/2" Roller Centers
Size To Order   Between Rail Width 
10" 13" 16" 22"
   Overall Frame Width 
12" 15" 18" 24"
5'
4'
Size To Order   Between Rail Width  
10" 13" 16" 22"
   Overall Frame Width  
12" 15" 18" 24"
5'
4'
• Painted Steel Frame
• 1-3/8" dia. Galvanized Rollers on 1-1/2" or 3" centers
• Hinge Mechanism With Die Springs and Gravity Section
• Latch Mechanism
• Lift Handles On Both Sides
• Less Floor Supports
• Aluminum Frame
• 1-3/8" dia. Aluminum Rollers on 1-1/2" or 3" centers
• Hinge Mechanism With Die Springs and Gravity Section
• Latch Mechanism
• Lift Handles On Both Sides
• Less Floor Supports
IMPORTANT NOTE. . . FLOOR SUPPORTS
• WHEN ORDERING Not Included in Base Price. Use Chart Below for
Required Elevation.
Please specify model to which Gate Assembly will be hinging from and rested on.
 "RS" SUPPORT
Model No.
Adjustment Top of Belt
Price Each
RS-1
10-3/16" to 11-15/16"
RS-1.2
11-3/16" to 12-15/16"
RS-1.4
12-3/16" to 13-15/16"
RS-2
13-3/16" to 16-3/16"
RS-3
15-11/16" to 18-11/16"
RS-4
18-11/16" to 24-11/16"
RS-5
22-11/16" to 28-11/16"
RS-6
26-11/16" to 38 -11/16"
RS-7
36-11/16" to 48-11/16"
RS-8
48-11/16" to 60-11/16"
RS-9
60-11/16" to 72-11/16"
RS-10
72-11/16" to 84-11/16"
RS-11
82-11/16" to 94-11/16"
RS-12
94-11/16" to 106-11/16"
• GUARD RAILS
Adjustable Universal Channel Guard Rail
Both Sides .........per foot ...................... $15.10
One Side Per foot ...................... $7.80
Angle Type
Type "A" or "B" available (Specify).
Prices are for Both Sides.
1" x 1" x 12 Ga....per foot ................... $7.80
NOTE: RS-7 to RS-12: Knee Braces included in price.
Knee braces Per pair ................................................. $30.00

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


19GSR-SBG GRAVITY DIE SPRING GATE ASSEMBLY
3" Roller Centers
Size To
Order
Between Rail Width
13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width
16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
5'
4'
19GSR-SBG GRAVITY DIE SPRING GATE ASSEMBLY
2" Roller Centers
Size To
Order
 Between Rail Width
13"
15"
17"
19"
21"
23"
25"
27"
31"
33"
37"
39"
    Overall Frame Width 
16"
18"
20"
22"
24"
26"
28"
30"
34"
36"
40"
42"
5'
4'
IMPORTANT NOTE. . . FLOOR SUPPORTS
• WHEN ORDERING Not Included in Base Price. Use Chart Below for
Required Elevation.
Please specify model to which Gate Assembly will be hinging from and rested on.
 "RS" SUPPORT
Model No.
Adjustment Top of Belt
Price Each
RS-1
11-3/16" to 12-15/16"
RS-1.2
12-3/16" to 13-15/16"
RS-1.4
13-3/16" to 14-15/16"
RS-2
14-3/16" to 17-3/16"
RS-3
16-11/16" to 19-11/16"
RS-4
19-11/16" to 25-11/16"
RS-5
23-11/16" to 29-11/16"
RS-6
27-11/16" to 39-11/16"
RS-7
37-11/16" to 49-11/16"
RS-8
49-11/16" to 61-11/16"
RS-9
61-11/16" to 73-11/16"
RS-10
73-11/16" to 85-11/16"
RS-11
83-11/16" to 95-11/16"
RS-12
95-11/16" to 107-11/16"
• GUARD RAILS
Adjustable Universal Channel Guard Rail
Both Sides Per foot ...................... $15.10
One Side Per foot ...................... $7.80
Angle Type
Type "A"
Prices are for Both Sides.
1 1/2/" x 1 1/2" x 12 Ga....per foot ............. $7.20
Type "B"
Prices are for Both Sides.
1 1/2/" x 1 1/2" x 12 Ga....per foot ............. $7.20
NOTE: RS-7 to RS-12: Knee Braces included in price.
Knee braces Per pair ...................................................

190-E24G - Powered Gate With Die Springs

• 1.9" Dia. x 16 Ga. Galvanized O-Ring-Slaved Rollers in a 6 1/2" x 12 Ga. Channel
   Frame
• (2) 24 Volt DC Motors with Control Cards on 4' and 5' Gate or (1) 24 Volt DC
   Motor with Control Card on 3' Gate
• Power Supply - 27 VDC 4 AMP (Requires 120 VAC or 230 VAC Single Phase
   Input Voltage)
• Non-Reversing
• Hinge Mechanism with Die Springs
• 65 FPM Constant Conveying Speed
• Less Floor Supports
power gate with die springs
IMPORTANT NOTES. . .
• WHEN ORDERING:
Please specify
section to which Gate Hinge Assembly
will be attached.
NOTE: Gate is ONE DIRECTION
ONLY. Contact factory for Reversing
Application.
• 3 ft. OAL Gates with 2 in. roller
centers require TWO motors.
• 4 ft. and 5 ft. OAL Gates with 2 in.
roller centers require THREE motors.
conveyor power gate
Size To
Order
Length
"A"
Between Rail Width
13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width
16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
5' 109 117 125 133 141 149 157 165 181 189 205 213
4' 83 91 99 107 115 123 131 139 155 163 179 187
3' 57 65 73 81 89 97 105 113 127 151 153 161

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR COMPLETE CONVEYOR INCLUDE:
• 1.9" Dia. x 16 Ga. Galvanized O-Ring-Slaved Rollers (Rollers on 3" Centers) in a 6-1/2" x 12 Ga. Channel Frame
• (2) 24 Volt DC Motors with Control Cards on 4' and 5', (1) 24 Volt DC Motor with Control Card on 3' Gate
• Power Supply - 27 VDC 4 AMP (Requires 120 VAC or 230 VAC Single Phase Input Voltage)
• Hinge Mechanism with Die Springs
• 65 FPM Constant Conveying Speed
• Less Floor Supports
3" ROLLER CENTERS
Size To
Order
Between Rail Width
13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width
16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
5'
4'
3'
N/A
N/A
2" ROLLER CENTERS
Size To
Order
Between Rail Width
13"
15"
17"
19"
21"
23"
25"
27"
31"
33"
37"
39"
Overall Frame Width
16"
18"
20"
22"
24"
26"
28"
30"
34"
36"
40"
42"
5'
4'
3'
N/A
N/A
FLOOR SUPPORTS GUARD RAILS
Not Included in Base Price. Use Chart Below for
Required Elevation.
Adjustable Universal Channel Guard Rail
Both Sides..........per foot..............................$15.10
One Side............per foot..............................$7.80
 "RS" SUPPORT
Model No. Adjustment Top of Belt Price Each
RS-1
16 7/16" to 18 3/16"
RS-1.2
17 7/16" to 19 3/16"
RS-1.4
18 7/16" to 20 3/16"
RS-2
19 7/16" to 22 7/16"
RS-3
21 15/16" to 24 15/16"
RS-4
24 15/16" to 30 15/16"
RS-5
28 15/16" to 34 15/16"
RS-6
32 15/16" to 44 15/16"
RS-7
42 15/16" to 54 15/16"
RS-8
54 15/16" to 66 15/16"
RS-9
66 15/16" to 78 15/16"
RS-10
78 15/16" to 90 15/16"
RS-11
88 15/16" to 100 15/16"
RS-12
100 15/16" to 112 15/16"
Angle Type
Type "A"
Prices are for Both Sides.
1-1/2" x 1-1/2" x 12 Ga....per foot................$7.20
Type "B"
Prices are for Both Sides.
1-1/2" x 1-1/2" x 12 Ga....per foot................$7.20
Additional Motor (Requires an additional motor
   with 2" R/C)
Add On..............per motor..........................$683.00
(Maximum 3 motors powered from 4 AMP power
supply)
• Less 4 AMP Power Supply
.........................deduct...............................$423.70
Speed Up Spool
   (Specify)......................................................N/C
NOTE: RS-7 to RS-12: Knee Braces included in price.
Knee braces Per pair ............................................................
$30.00
IMPORTANT NOTES. . .
WHEN ORDERING
   Please specify section to which Gate Assembly will be hinging from and resting on..
• NOTE: 3' Gate is standard with (1) motor. 4' and 5' Gates are standard with (2) motors.
• NOTE: Gate is ONE DIRECTION ONLY. Contact us for Reversing Application.

Conveyor Accessories, Gates, Manual Gate, Gravity Die Spring Balanced Gate Assembly, and Powered Roller Gate
with Die Springs from your source for material handling equipment.
Back to Product Category
Visa - MasterCard - AMEX
Home - Order - Search - Quote - Contact Us - About Us - My Account - Shopping Cart